From 791d3ef2e11100449837dc0b6fe884e60ca3a484 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Mon, 23 Jul 2018 15:59:44 -0600 Subject: dt-bindings: remove 'interrupt-parent' from bindings 'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/iio/proximity/sx9500.txt | 1 - 1 file changed, 1 deletion(-) (limited to 'Documentation/devicetree/bindings/iio/proximity/sx9500.txt') diff --git a/Documentation/devicetree/bindings/iio/proximity/sx9500.txt b/Documentation/devicetree/bindings/iio/proximity/sx9500.txt index b301dd2b35da..c54455db3bec 100644 --- a/Documentation/devicetree/bindings/iio/proximity/sx9500.txt +++ b/Documentation/devicetree/bindings/iio/proximity/sx9500.txt @@ -3,7 +3,6 @@ Semtech's SX9500 capacitive proximity button device driver Required properties: - compatible: must be "semtech,sx9500" - reg: i2c address where to find the device - - interrupt-parent : should be the phandle for the interrupt controller - interrupts : the sole interrupt generated by the device Refer to interrupt-controller/interrupts.txt for generic -- cgit v1.2.1