From 77edf603f22425dedd5963e9b86db7ebb15c6caf Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 1 Nov 2016 07:41:17 -0200 Subject: [media] cec rst: convert tables and drop the 'row' comments This uses Laurent's python script to convert all tables, dropping the useless 'row' comments. See commit c2b66cafdf02 ("[media] v4l: doc: Remove row numbers from tables") for the script that was used. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- .../media/uapi/cec/cec-ioc-adap-g-caps.rst | 156 +++---- .../media/uapi/cec/cec-ioc-adap-g-log-addrs.rst | 475 ++++++++------------- Documentation/media/uapi/cec/cec-ioc-dqevent.rst | 182 +++----- Documentation/media/uapi/cec/cec-ioc-g-mode.rst | 317 ++++++-------- Documentation/media/uapi/cec/cec-ioc-receive.rst | 394 +++++++---------- 5 files changed, 579 insertions(+), 945 deletions(-) diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst index a35dca281178..2b0ddb14b280 100644 --- a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst +++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst @@ -48,41 +48,21 @@ returns the information to the application. The ioctl never fails. :stub-columns: 0 :widths: 1 1 16 - - - .. row 1 - - - char - - - ``driver[32]`` - - - The name of the cec adapter driver. - - - .. row 2 - - - char - - - ``name[32]`` - - - The name of this CEC adapter. The combination ``driver`` and - ``name`` must be unique. - - - .. row 3 - - - __u32 - - - ``capabilities`` - - - The capabilities of the CEC adapter, see - :ref:`cec-capabilities`. - - - .. row 4 - - - __u32 - - - ``version`` - - - CEC Framework API version, formatted with the ``KERNEL_VERSION()`` - macro. + * - char + - ``driver[32]`` + - The name of the cec adapter driver. + * - char + - ``name[32]`` + - The name of this CEC adapter. The combination ``driver`` and + ``name`` must be unique. + * - __u32 + - ``capabilities`` + - The capabilities of the CEC adapter, see + :ref:`cec-capabilities`. + * - __u32 + - ``version`` + - CEC Framework API version, formatted with the ``KERNEL_VERSION()`` + macro. .. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.6cm}| @@ -94,68 +74,50 @@ returns the information to the application. The ioctl never fails. :stub-columns: 0 :widths: 3 1 8 - - - .. _`CEC-CAP-PHYS-ADDR`: - - - ``CEC_CAP_PHYS_ADDR`` - - - 0x00000001 - - - Userspace has to configure the physical address by calling - :ref:`ioctl CEC_ADAP_S_PHYS_ADDR `. If - this capability isn't set, then setting the physical address is - handled by the kernel whenever the EDID is set (for an HDMI - receiver) or read (for an HDMI transmitter). - - - .. _`CEC-CAP-LOG-ADDRS`: - - - ``CEC_CAP_LOG_ADDRS`` - - - 0x00000002 - - - Userspace has to configure the logical addresses by calling - :ref:`ioctl CEC_ADAP_S_LOG_ADDRS `. If - this capability isn't set, then the kernel will have configured - this. - - - .. _`CEC-CAP-TRANSMIT`: - - - ``CEC_CAP_TRANSMIT`` - - - 0x00000004 - - - Userspace can transmit CEC messages by calling - :ref:`ioctl CEC_TRANSMIT `. This implies that - userspace can be a follower as well, since being able to transmit - messages is a prerequisite of becoming a follower. If this - capability isn't set, then the kernel will handle all CEC - transmits and process all CEC messages it receives. - - - .. _`CEC-CAP-PASSTHROUGH`: - - - ``CEC_CAP_PASSTHROUGH`` - - - 0x00000008 - - - Userspace can use the passthrough mode by calling - :ref:`ioctl CEC_S_MODE `. - - - .. _`CEC-CAP-RC`: - - - ``CEC_CAP_RC`` - - - 0x00000010 - - - This adapter supports the remote control protocol. - - - .. _`CEC-CAP-MONITOR-ALL`: - - - ``CEC_CAP_MONITOR_ALL`` - - - 0x00000020 - - - The CEC hardware can monitor all messages, not just directed and - broadcast messages. + * .. _`CEC-CAP-PHYS-ADDR`: + + - ``CEC_CAP_PHYS_ADDR`` + - 0x00000001 + - Userspace has to configure the physical address by calling + :ref:`ioctl CEC_ADAP_S_PHYS_ADDR `. If + this capability isn't set, then setting the physical address is + handled by the kernel whenever the EDID is set (for an HDMI + receiver) or read (for an HDMI transmitter). + * .. _`CEC-CAP-LOG-ADDRS`: + + - ``CEC_CAP_LOG_ADDRS`` + - 0x00000002 + - Userspace has to configure the logical addresses by calling + :ref:`ioctl CEC_ADAP_S_LOG_ADDRS `. If + this capability isn't set, then the kernel will have configured + this. + * .. _`CEC-CAP-TRANSMIT`: + + - ``CEC_CAP_TRANSMIT`` + - 0x00000004 + - Userspace can transmit CEC messages by calling + :ref:`ioctl CEC_TRANSMIT `. This implies that + userspace can be a follower as well, since being able to transmit + messages is a prerequisite of becoming a follower. If this + capability isn't set, then the kernel will handle all CEC + transmits and process all CEC messages it receives. + * .. _`CEC-CAP-PASSTHROUGH`: + + - ``CEC_CAP_PASSTHROUGH`` + - 0x00000008 + - Userspace can use the passthrough mode by calling + :ref:`ioctl CEC_S_MODE `. + * .. _`CEC-CAP-RC`: + + - ``CEC_CAP_RC`` + - 0x00000010 + - This adapter supports the remote control protocol. + * .. _`CEC-CAP-MONITOR-ALL`: + + - ``CEC_CAP_MONITOR_ALL`` + - 0x00000020 + - The CEC hardware can monitor all messages, not just directed and + broadcast messages. diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst index 940a16d8d55e..af35f7185439 100644 --- a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst +++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst @@ -77,134 +77,79 @@ logical address types are already defined will return with error ``EBUSY``. :stub-columns: 0 :widths: 1 1 16 - - - .. row 1 - - - __u8 - - - ``log_addr[CEC_MAX_LOG_ADDRS]`` - - - The actual logical addresses that were claimed. This is set by the - driver. If no logical address could be claimed, then it is set to - ``CEC_LOG_ADDR_INVALID``. If this adapter is Unregistered, then - ``log_addr[0]`` is set to 0xf and all others to - ``CEC_LOG_ADDR_INVALID``. - - - .. row 2 - - - __u16 - - - ``log_addr_mask`` - - - The bitmask of all logical addresses this adapter has claimed. If - this adapter is Unregistered then ``log_addr_mask`` sets bit 15 - and clears all other bits. If this adapter is not configured at - all, then ``log_addr_mask`` is set to 0. Set by the driver. - - - .. row 3 - - - __u8 - - - ``cec_version`` - - - The CEC version that this adapter shall use. See - :ref:`cec-versions`. Used to implement the - ``CEC_MSG_CEC_VERSION`` and ``CEC_MSG_REPORT_FEATURES`` messages. - Note that :ref:`CEC_OP_CEC_VERSION_1_3A ` is not allowed by the CEC - framework. - - - .. row 4 - - - __u8 - - - ``num_log_addrs`` - - - Number of logical addresses to set up. Must be ≤ - ``available_log_addrs`` as returned by - :ref:`CEC_ADAP_G_CAPS`. All arrays in - this structure are only filled up to index - ``available_log_addrs``-1. The remaining array elements will be - ignored. Note that the CEC 2.0 standard allows for a maximum of 2 - logical addresses, although some hardware has support for more. - ``CEC_MAX_LOG_ADDRS`` is 4. The driver will return the actual - number of logical addresses it could claim, which may be less than - what was requested. If this field is set to 0, then the CEC - adapter shall clear all claimed logical addresses and all other - fields will be ignored. - - - .. row 5 - - - __u32 - - - ``vendor_id`` - - - The vendor ID is a 24-bit number that identifies the specific - vendor or entity. Based on this ID vendor specific commands may be - defined. If you do not want a vendor ID then set it to - ``CEC_VENDOR_ID_NONE``. - - - .. row 6 - - - __u32 - - - ``flags`` - - - Flags. See :ref:`cec-log-addrs-flags` for a list of available flags. - - - .. row 7 - - - char - - - ``osd_name[15]`` - - - The On-Screen Display name as is returned by the - ``CEC_MSG_SET_OSD_NAME`` message. - - - .. row 8 - - - __u8 - - - ``primary_device_type[CEC_MAX_LOG_ADDRS]`` - - - Primary device type for each logical address. See - :ref:`cec-prim-dev-types` for possible types. - - - .. row 9 - - - __u8 - - - ``log_addr_type[CEC_MAX_LOG_ADDRS]`` - - - Logical address types. See :ref:`cec-log-addr-types` for - possible types. The driver will update this with the actual - logical address type that it claimed (e.g. it may have to fallback - to :ref:`CEC_LOG_ADDR_TYPE_UNREGISTERED `). - - - .. row 10 - - - __u8 - - - ``all_device_types[CEC_MAX_LOG_ADDRS]`` - - - CEC 2.0 specific: the bit mask of all device types. See - :ref:`cec-all-dev-types-flags`. It is used in the CEC 2.0 - ``CEC_MSG_REPORT_FEATURES`` message. For CEC 1.4 you can either leave - this field to 0, or fill it in according to the CEC 2.0 guidelines to - give the CEC framework more information about the device type, even - though the framework won't use it directly in the CEC message. - - - .. row 11 - - - __u8 - - - ``features[CEC_MAX_LOG_ADDRS][12]`` - - - Features for each logical address. It is used in the CEC 2.0 - ``CEC_MSG_REPORT_FEATURES`` message. The 12 bytes include both the - RC Profile and the Device Features. For CEC 1.4 you can either leave - this field to all 0, or fill it in according to the CEC 2.0 guidelines to - give the CEC framework more information about the device type, even - though the framework won't use it directly in the CEC message. + * - __u8 + - ``log_addr[CEC_MAX_LOG_ADDRS]`` + - The actual logical addresses that were claimed. This is set by the + driver. If no logical address could be claimed, then it is set to + ``CEC_LOG_ADDR_INVALID``. If this adapter is Unregistered, then + ``log_addr[0]`` is set to 0xf and all others to + ``CEC_LOG_ADDR_INVALID``. + * - __u16 + - ``log_addr_mask`` + - The bitmask of all logical addresses this adapter has claimed. If + this adapter is Unregistered then ``log_addr_mask`` sets bit 15 + and clears all other bits. If this adapter is not configured at + all, then ``log_addr_mask`` is set to 0. Set by the driver. + * - __u8 + - ``cec_version`` + - The CEC version that this adapter shall use. See + :ref:`cec-versions`. Used to implement the + ``CEC_MSG_CEC_VERSION`` and ``CEC_MSG_REPORT_FEATURES`` messages. + Note that :ref:`CEC_OP_CEC_VERSION_1_3A ` is not allowed by the CEC + framework. + * - __u8 + - ``num_log_addrs`` + - Number of logical addresses to set up. Must be ≤ + ``available_log_addrs`` as returned by + :ref:`CEC_ADAP_G_CAPS`. All arrays in + this structure are only filled up to index + ``available_log_addrs``-1. The remaining array elements will be + ignored. Note that the CEC 2.0 standard allows for a maximum of 2 + logical addresses, although some hardware has support for more. + ``CEC_MAX_LOG_ADDRS`` is 4. The driver will return the actual + number of logical addresses it could claim, which may be less than + what was requested. If this field is set to 0, then the CEC + adapter shall clear all claimed logical addresses and all other + fields will be ignored. + * - __u32 + - ``vendor_id`` + - The vendor ID is a 24-bit number that identifies the specific + vendor or entity. Based on this ID vendor specific commands may be + defined. If you do not want a vendor ID then set it to + ``CEC_VENDOR_ID_NONE``. + * - __u32 + - ``flags`` + - Flags. See :ref:`cec-log-addrs-flags` for a list of available flags. + * - char + - ``osd_name[15]`` + - The On-Screen Display name as is returned by the + ``CEC_MSG_SET_OSD_NAME`` message. + * - __u8 + - ``primary_device_type[CEC_MAX_LOG_ADDRS]`` + - Primary device type for each logical address. See + :ref:`cec-prim-dev-types` for possible types. + * - __u8 + - ``log_addr_type[CEC_MAX_LOG_ADDRS]`` + - Logical address types. See :ref:`cec-log-addr-types` for + possible types. The driver will update this with the actual + logical address type that it claimed (e.g. it may have to fallback + to :ref:`CEC_LOG_ADDR_TYPE_UNREGISTERED `). + * - __u8 + - ``all_device_types[CEC_MAX_LOG_ADDRS]`` + - CEC 2.0 specific: the bit mask of all device types. See + :ref:`cec-all-dev-types-flags`. It is used in the CEC 2.0 + ``CEC_MSG_REPORT_FEATURES`` message. For CEC 1.4 you can either leave + this field to 0, or fill it in according to the CEC 2.0 guidelines to + give the CEC framework more information about the device type, even + though the framework won't use it directly in the CEC message. + * - __u8 + - ``features[CEC_MAX_LOG_ADDRS][12]`` + - Features for each logical address. It is used in the CEC 2.0 + ``CEC_MSG_REPORT_FEATURES`` message. The 12 bytes include both the + RC Profile and the Device Features. For CEC 1.4 you can either leave + this field to all 0, or fill it in according to the CEC 2.0 guidelines to + give the CEC framework more information about the device type, even + though the framework won't use it directly in the CEC message. .. _cec-log-addrs-flags: @@ -213,17 +158,14 @@ logical address types are already defined will return with error ``EBUSY``. :stub-columns: 0 :widths: 3 1 4 + * .. _`CEC-LOG-ADDRS-FL-ALLOW-UNREG-FALLBACK`: - - .. _`CEC-LOG-ADDRS-FL-ALLOW-UNREG-FALLBACK`: - - - ``CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK`` - - - 1 - - - By default if no logical address of the requested type can be claimed, then - it will go back to the unconfigured state. If this flag is set, then it will - fallback to the Unregistered logical address. Note that if the Unregistered - logical address was explicitly requested, then this flag has no effect. + - ``CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK`` + - 1 + - By default if no logical address of the requested type can be claimed, then + it will go back to the unconfigured state. If this flag is set, then it will + fallback to the Unregistered logical address. Note that if the Unregistered + logical address was explicitly requested, then this flag has no effect. .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| @@ -234,30 +176,21 @@ logical address types are already defined will return with error ``EBUSY``. :stub-columns: 0 :widths: 3 1 4 + * .. _`CEC-OP-CEC-VERSION-1-3A`: - - .. _`CEC-OP-CEC-VERSION-1-3A`: - - - ``CEC_OP_CEC_VERSION_1_3A`` - - - 4 - - - CEC version according to the HDMI 1.3a standard. - - - .. _`CEC-OP-CEC-VERSION-1-4B`: + - ``CEC_OP_CEC_VERSION_1_3A`` + - 4 + - CEC version according to the HDMI 1.3a standard. + * .. _`CEC-OP-CEC-VERSION-1-4B`: - - ``CEC_OP_CEC_VERSION_1_4B`` + - ``CEC_OP_CEC_VERSION_1_4B`` + - 5 + - CEC version according to the HDMI 1.4b standard. + * .. _`CEC-OP-CEC-VERSION-2-0`: - - 5 - - - CEC version according to the HDMI 1.4b standard. - - - .. _`CEC-OP-CEC-VERSION-2-0`: - - - ``CEC_OP_CEC_VERSION_2_0`` - - - 6 - - - CEC version according to the HDMI 2.0 standard. + - ``CEC_OP_CEC_VERSION_2_0`` + - 6 + - CEC version according to the HDMI 2.0 standard. .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| @@ -269,62 +202,41 @@ logical address types are already defined will return with error ``EBUSY``. :stub-columns: 0 :widths: 3 1 4 + * .. _`CEC-OP-PRIM-DEVTYPE-TV`: - - .. _`CEC-OP-PRIM-DEVTYPE-TV`: - - - ``CEC_OP_PRIM_DEVTYPE_TV`` - - - 0 + - ``CEC_OP_PRIM_DEVTYPE_TV`` + - 0 + - Use for a TV. + * .. _`CEC-OP-PRIM-DEVTYPE-RECORD`: - - Use for a TV. + - ``CEC_OP_PRIM_DEVTYPE_RECORD`` + - 1 + - Use for a recording device. + * .. _`CEC-OP-PRIM-DEVTYPE-TUNER`: - - .. _`CEC-OP-PRIM-DEVTYPE-RECORD`: + - ``CEC_OP_PRIM_DEVTYPE_TUNER`` + - 3 + - Use for a device with a tuner. + * .. _`CEC-OP-PRIM-DEVTYPE-PLAYBACK`: - - ``CEC_OP_PRIM_DEVTYPE_RECORD`` + - ``CEC_OP_PRIM_DEVTYPE_PLAYBACK`` + - 4 + - Use for a playback device. + * .. _`CEC-OP-PRIM-DEVTYPE-AUDIOSYSTEM`: - - 1 + - ``CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM`` + - 5 + - Use for an audio system (e.g. an audio/video receiver). + * .. _`CEC-OP-PRIM-DEVTYPE-SWITCH`: - - Use for a recording device. + - ``CEC_OP_PRIM_DEVTYPE_SWITCH`` + - 6 + - Use for a CEC switch. + * .. _`CEC-OP-PRIM-DEVTYPE-VIDEOPROC`: - - .. _`CEC-OP-PRIM-DEVTYPE-TUNER`: - - - ``CEC_OP_PRIM_DEVTYPE_TUNER`` - - - 3 - - - Use for a device with a tuner. - - - .. _`CEC-OP-PRIM-DEVTYPE-PLAYBACK`: - - - ``CEC_OP_PRIM_DEVTYPE_PLAYBACK`` - - - 4 - - - Use for a playback device. - - - .. _`CEC-OP-PRIM-DEVTYPE-AUDIOSYSTEM`: - - - ``CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM`` - - - 5 - - - Use for an audio system (e.g. an audio/video receiver). - - - .. _`CEC-OP-PRIM-DEVTYPE-SWITCH`: - - - ``CEC_OP_PRIM_DEVTYPE_SWITCH`` - - - 6 - - - Use for a CEC switch. - - - .. _`CEC-OP-PRIM-DEVTYPE-VIDEOPROC`: - - - ``CEC_OP_PRIM_DEVTYPE_VIDEOPROC`` - - - 7 - - - Use for a video processor device. + - ``CEC_OP_PRIM_DEVTYPE_VIDEOPROC`` + - 7 + - Use for a video processor device. .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| @@ -336,64 +248,43 @@ logical address types are already defined will return with error ``EBUSY``. :stub-columns: 0 :widths: 3 1 16 + * .. _`CEC-LOG-ADDR-TYPE-TV`: - - .. _`CEC-LOG-ADDR-TYPE-TV`: - - - ``CEC_LOG_ADDR_TYPE_TV`` - - - 0 - - - Use for a TV. - - - .. _`CEC-LOG-ADDR-TYPE-RECORD`: - - - ``CEC_LOG_ADDR_TYPE_RECORD`` - - - 1 - - - Use for a recording device. - - - .. _`CEC-LOG-ADDR-TYPE-TUNER`: - - - ``CEC_LOG_ADDR_TYPE_TUNER`` - - - 2 + - ``CEC_LOG_ADDR_TYPE_TV`` + - 0 + - Use for a TV. + * .. _`CEC-LOG-ADDR-TYPE-RECORD`: - - Use for a tuner device. + - ``CEC_LOG_ADDR_TYPE_RECORD`` + - 1 + - Use for a recording device. + * .. _`CEC-LOG-ADDR-TYPE-TUNER`: - - .. _`CEC-LOG-ADDR-TYPE-PLAYBACK`: + - ``CEC_LOG_ADDR_TYPE_TUNER`` + - 2 + - Use for a tuner device. + * .. _`CEC-LOG-ADDR-TYPE-PLAYBACK`: - - ``CEC_LOG_ADDR_TYPE_PLAYBACK`` + - ``CEC_LOG_ADDR_TYPE_PLAYBACK`` + - 3 + - Use for a playback device. + * .. _`CEC-LOG-ADDR-TYPE-AUDIOSYSTEM`: - - 3 + - ``CEC_LOG_ADDR_TYPE_AUDIOSYSTEM`` + - 4 + - Use for an audio system device. + * .. _`CEC-LOG-ADDR-TYPE-SPECIFIC`: - - Use for a playback device. + - ``CEC_LOG_ADDR_TYPE_SPECIFIC`` + - 5 + - Use for a second TV or for a video processor device. + * .. _`CEC-LOG-ADDR-TYPE-UNREGISTERED`: - - .. _`CEC-LOG-ADDR-TYPE-AUDIOSYSTEM`: - - - ``CEC_LOG_ADDR_TYPE_AUDIOSYSTEM`` - - - 4 - - - Use for an audio system device. - - - .. _`CEC-LOG-ADDR-TYPE-SPECIFIC`: - - - ``CEC_LOG_ADDR_TYPE_SPECIFIC`` - - - 5 - - - Use for a second TV or for a video processor device. - - - .. _`CEC-LOG-ADDR-TYPE-UNREGISTERED`: - - - ``CEC_LOG_ADDR_TYPE_UNREGISTERED`` - - - 6 - - - Use this if you just want to remain unregistered. Used for pure - CEC switches or CDC-only devices (CDC: Capability Discovery and - Control). + - ``CEC_LOG_ADDR_TYPE_UNREGISTERED`` + - 6 + - Use this if you just want to remain unregistered. Used for pure + CEC switches or CDC-only devices (CDC: Capability Discovery and + Control). @@ -406,54 +297,36 @@ logical address types are already defined will return with error ``EBUSY``. :stub-columns: 0 :widths: 3 1 4 + * .. _`CEC-OP-ALL-DEVTYPE-TV`: - - .. _`CEC-OP-ALL-DEVTYPE-TV`: - - - ``CEC_OP_ALL_DEVTYPE_TV`` - - - 0x80 - - - This supports the TV type. - - - .. _`CEC-OP-ALL-DEVTYPE-RECORD`: - - - ``CEC_OP_ALL_DEVTYPE_RECORD`` - - - 0x40 - - - This supports the Recording type. - - - .. _`CEC-OP-ALL-DEVTYPE-TUNER`: - - - ``CEC_OP_ALL_DEVTYPE_TUNER`` - - - 0x20 - - - This supports the Tuner type. - - - .. _`CEC-OP-ALL-DEVTYPE-PLAYBACK`: - - - ``CEC_OP_ALL_DEVTYPE_PLAYBACK`` - - - 0x10 - - - This supports the Playback type. - - - .. _`CEC-OP-ALL-DEVTYPE-AUDIOSYSTEM`: - - - ``CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM`` - - - 0x08 + - ``CEC_OP_ALL_DEVTYPE_TV`` + - 0x80 + - This supports the TV type. + * .. _`CEC-OP-ALL-DEVTYPE-RECORD`: - - This supports the Audio System type. + - ``CEC_OP_ALL_DEVTYPE_RECORD`` + - 0x40 + - This supports the Recording type. + * .. _`CEC-OP-ALL-DEVTYPE-TUNER`: - - .. _`CEC-OP-ALL-DEVTYPE-SWITCH`: + - ``CEC_OP_ALL_DEVTYPE_TUNER`` + - 0x20 + - This supports the Tuner type. + * .. _`CEC-OP-ALL-DEVTYPE-PLAYBACK`: - - ``CEC_OP_ALL_DEVTYPE_SWITCH`` + - ``CEC_OP_ALL_DEVTYPE_PLAYBACK`` + - 0x10 + - This supports the Playback type. + * .. _`CEC-OP-ALL-DEVTYPE-AUDIOSYSTEM`: - - 0x04 + - ``CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM`` + - 0x08 + - This supports the Audio System type. + * .. _`CEC-OP-ALL-DEVTYPE-SWITCH`: - - This supports the CEC Switch or Video Processing type. + - ``CEC_OP_ALL_DEVTYPE_SWITCH`` + - 0x04 + - This supports the CEC Switch or Video Processing type. diff --git a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst index e283588a830b..e256c6605de7 100644 --- a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst +++ b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst @@ -58,26 +58,16 @@ it is guaranteed that the state did change in between the two events. :stub-columns: 0 :widths: 1 1 8 - - - .. row 1 - - - __u16 - - - ``phys_addr`` - - - The current physical address. This is ``CEC_PHYS_ADDR_INVALID`` if no + * - __u16 + - ``phys_addr`` + - The current physical address. This is ``CEC_PHYS_ADDR_INVALID`` if no valid physical address is set. - - - .. row 2 - - - __u16 - - - ``log_addr_mask`` - - - The current set of claimed logical addresses. This is 0 if no logical - addresses are claimed or if ``phys_addr`` is ``CEC_PHYS_ADDR_INVALID``. - If bit 15 is set (``1 << CEC_LOG_ADDR_UNREGISTERED``) then this device - has the unregistered logical address. In that case all other bits are 0. + * - __u16 + - ``log_addr_mask`` + - The current set of claimed logical addresses. This is 0 if no logical + addresses are claimed or if ``phys_addr`` is ``CEC_PHYS_ADDR_INVALID``. + If bit 15 is set (``1 << CEC_LOG_ADDR_UNREGISTERED``) then this device + has the unregistered logical address. In that case all other bits are 0. .. c:type:: cec_event_lost_msgs @@ -89,22 +79,17 @@ it is guaranteed that the state did change in between the two events. :stub-columns: 0 :widths: 1 1 16 - - - .. row 1 - - - __u32 - - - ``lost_msgs`` - - - Set to the number of lost messages since the filehandle was opened - or since the last time this event was dequeued for this - filehandle. The messages lost are the oldest messages. So when a - new message arrives and there is no more room, then the oldest - message is discarded to make room for the new one. The internal - size of the message queue guarantees that all messages received in - the last two seconds will be stored. Since messages should be - replied to within a second according to the CEC specification, - this is more than enough. + * - __u32 + - ``lost_msgs`` + - Set to the number of lost messages since the filehandle was opened + or since the last time this event was dequeued for this + filehandle. The messages lost are the oldest messages. So when a + new message arrives and there is no more room, then the oldest + message is discarded to make room for the new one. The internal + size of the message queue guarantees that all messages received in + the last two seconds will be stored. Since messages should be + replied to within a second according to the CEC specification, + this is more than enough. .. tabularcolumns:: |p{1.0cm}|p{4.2cm}|p{2.5cm}|p{8.8cm}| @@ -116,62 +101,32 @@ it is guaranteed that the state did change in between the two events. :stub-columns: 0 :widths: 1 1 1 8 - - - .. row 1 - - - __u64 - - - ``ts`` - - - :cspan:`1` Timestamp of the event in ns. - - The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access - the same clock from userspace use :c:func:`clock_gettime`. - - - .. row 2 - - - __u32 - - - ``event`` - - - :cspan:`1` The CEC event type, see :ref:`cec-events`. - - - .. row 3 - - - __u32 - - - ``flags`` - - - :cspan:`1` Event flags, see :ref:`cec-event-flags`. - - - .. row 4 - - - union - - - (anonymous) - - - - - - - - .. row 5 - - - - - struct cec_event_state_change - - - ``state_change`` - - - The new adapter state as sent by the :ref:`CEC_EVENT_STATE_CHANGE ` - event. - - - .. row 6 - - - - - struct cec_event_lost_msgs - - - ``lost_msgs`` - - - The number of lost messages as sent by the :ref:`CEC_EVENT_LOST_MSGS ` - event. + * - __u64 + - ``ts`` + - :cspan:`1` Timestamp of the event in ns. + + The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access + the same clock from userspace use :c:func:`clock_gettime`. + * - __u32 + - ``event`` + - :cspan:`1` The CEC event type, see :ref:`cec-events`. + * - __u32 + - ``flags`` + - :cspan:`1` Event flags, see :ref:`cec-event-flags`. + * - union + - (anonymous) + - + - + * - + - struct cec_event_state_change + - ``state_change`` + - The new adapter state as sent by the :ref:`CEC_EVENT_STATE_CHANGE ` + event. + * - + - struct cec_event_lost_msgs + - ``lost_msgs`` + - The number of lost messages as sent by the :ref:`CEC_EVENT_LOST_MSGS ` + event. .. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}| @@ -183,25 +138,19 @@ it is guaranteed that the state did change in between the two events. :stub-columns: 0 :widths: 3 1 16 + * .. _`CEC-EVENT-STATE-CHANGE`: - - .. _`CEC-EVENT-STATE-CHANGE`: - - - ``CEC_EVENT_STATE_CHANGE`` - - - 1 - - - Generated when the CEC Adapter's state changes. When open() is - called an initial event will be generated for that filehandle with - the CEC Adapter's state at that time. - - - .. _`CEC-EVENT-LOST-MSGS`: + - ``CEC_EVENT_STATE_CHANGE`` + - 1 + - Generated when the CEC Adapter's state changes. When open() is + called an initial event will be generated for that filehandle with + the CEC Adapter's state at that time. + * .. _`CEC-EVENT-LOST-MSGS`: - - ``CEC_EVENT_LOST_MSGS`` - - - 2 - - - Generated if one or more CEC messages were lost because the - application didn't dequeue CEC messages fast enough. + - ``CEC_EVENT_LOST_MSGS`` + - 2 + - Generated if one or more CEC messages were lost because the + application didn't dequeue CEC messages fast enough. .. tabularcolumns:: |p{6.0cm}|p{0.6cm}|p{10.9cm}| @@ -213,17 +162,14 @@ it is guaranteed that the state did change in between the two events. :stub-columns: 0 :widths: 3 1 8 + * .. _`CEC-EVENT-FL-INITIAL-VALUE`: - - .. _`CEC-EVENT-FL-INITIAL-VALUE`: - - - ``CEC_EVENT_FL_INITIAL_VALUE`` - - - 1 - - - Set for the initial events that are generated when the device is - opened. See the table above for which events do this. This allows - applications to learn the initial state of the CEC adapter at - open() time. + - ``CEC_EVENT_FL_INITIAL_VALUE`` + - 1 + - Set for the initial events that are generated when the device is + opened. See the table above for which events do this. This allows + applications to learn the initial state of the CEC adapter at + open() time. diff --git a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst index 70a41902ab58..4f5818b9d277 100644 --- a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst +++ b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst @@ -83,37 +83,28 @@ Available initiator modes are: :stub-columns: 0 :widths: 3 1 16 - - - .. _`CEC-MODE-NO-INITIATOR`: - - - ``CEC_MODE_NO_INITIATOR`` - - - 0x0 - - - This is not an initiator, i.e. it cannot transmit CEC messages or - make any other changes to the CEC adapter. - - - .. _`CEC-MODE-INITIATOR`: - - - ``CEC_MODE_INITIATOR`` - - - 0x1 - - - This is an initiator (the default when the device is opened) and - it can transmit CEC messages and make changes to the CEC adapter, - unless there is an exclusive initiator. - - - .. _`CEC-MODE-EXCL-INITIATOR`: - - - ``CEC_MODE_EXCL_INITIATOR`` - - - 0x2 - - - This is an exclusive initiator and this file descriptor is the - only one that can transmit CEC messages and make changes to the - CEC adapter. If someone else is already the exclusive initiator - then an attempt to become one will return the ``EBUSY`` error code - error. + * .. _`CEC-MODE-NO-INITIATOR`: + + - ``CEC_MODE_NO_INITIATOR`` + - 0x0 + - This is not an initiator, i.e. it cannot transmit CEC messages or + make any other changes to the CEC adapter. + * .. _`CEC-MODE-INITIATOR`: + + - ``CEC_MODE_INITIATOR`` + - 0x1 + - This is an initiator (the default when the device is opened) and + it can transmit CEC messages and make changes to the CEC adapter, + unless there is an exclusive initiator. + * .. _`CEC-MODE-EXCL-INITIATOR`: + + - ``CEC_MODE_EXCL_INITIATOR`` + - 0x2 + - This is an exclusive initiator and this file descriptor is the + only one that can transmit CEC messages and make changes to the + CEC adapter. If someone else is already the exclusive initiator + then an attempt to become one will return the ``EBUSY`` error code + error. Available follower modes are: @@ -127,86 +118,68 @@ Available follower modes are: :stub-columns: 0 :widths: 3 1 16 - - - .. _`CEC-MODE-NO-FOLLOWER`: - - - ``CEC_MODE_NO_FOLLOWER`` - - - 0x00 - - - This is not a follower (the default when the device is opened). - - - .. _`CEC-MODE-FOLLOWER`: - - - ``CEC_MODE_FOLLOWER`` - - - 0x10 - - - This is a follower and it will receive CEC messages unless there - is an exclusive follower. You cannot become a follower if - :ref:`CEC_CAP_TRANSMIT ` is not set or if :ref:`CEC_MODE_NO_INITIATOR ` - was specified, the ``EINVAL`` error code is returned in that case. - - - .. _`CEC-MODE-EXCL-FOLLOWER`: - - - ``CEC_MODE_EXCL_FOLLOWER`` - - - 0x20 - - - This is an exclusive follower and only this file descriptor will - receive CEC messages for processing. If someone else is already - the exclusive follower then an attempt to become one will return - the ``EBUSY`` error code. You cannot become a follower if - :ref:`CEC_CAP_TRANSMIT ` is not set or if :ref:`CEC_MODE_NO_INITIATOR ` - was specified, the ``EINVAL`` error code is returned in that case. - - - .. _`CEC-MODE-EXCL-FOLLOWER-PASSTHRU`: - - - ``CEC_MODE_EXCL_FOLLOWER_PASSTHRU`` - - - 0x30 - - - This is an exclusive follower and only this file descriptor will - receive CEC messages for processing. In addition it will put the - CEC device into passthrough mode, allowing the exclusive follower - to handle most core messages instead of relying on the CEC - framework for that. If someone else is already the exclusive - follower then an attempt to become one will return the ``EBUSY`` error - code. You cannot become a follower if :ref:`CEC_CAP_TRANSMIT ` - is not set or if :ref:`CEC_MODE_NO_INITIATOR ` was specified, - the ``EINVAL`` error code is returned in that case. - - - .. _`CEC-MODE-MONITOR`: - - - ``CEC_MODE_MONITOR`` - - - 0xe0 - - - Put the file descriptor into monitor mode. Can only be used in - combination with :ref:`CEC_MODE_NO_INITIATOR `, otherwise EINVAL error - code will be returned. In monitor mode all messages this CEC - device transmits and all messages it receives (both broadcast - messages and directed messages for one its logical addresses) will - be reported. This is very useful for debugging. This is only - allowed if the process has the ``CAP_NET_ADMIN`` capability. If - that is not set, then the ``EPERM`` error code is returned. - - - .. _`CEC-MODE-MONITOR-ALL`: - - - ``CEC_MODE_MONITOR_ALL`` - - - 0xf0 - - - Put the file descriptor into 'monitor all' mode. Can only be used - in combination with :ref:`CEC_MODE_NO_INITIATOR `, otherwise - the ``EINVAL`` error code will be returned. In 'monitor all' mode all messages - this CEC device transmits and all messages it receives, including - directed messages for other CEC devices will be reported. This is - very useful for debugging, but not all devices support this. This - mode requires that the :ref:`CEC_CAP_MONITOR_ALL ` capability is set, - otherwise the ``EINVAL`` error code is returned. This is only allowed if - the process has the ``CAP_NET_ADMIN`` capability. If that is not - set, then the ``EPERM`` error code is returned. + * .. _`CEC-MODE-NO-FOLLOWER`: + + - ``CEC_MODE_NO_FOLLOWER`` + - 0x00 + - This is not a follower (the default when the device is opened). + * .. _`CEC-MODE-FOLLOWER`: + + - ``CEC_MODE_FOLLOWER`` + - 0x10 + - This is a follower and it will receive CEC messages unless there + is an exclusive follower. You cannot become a follower if + :ref:`CEC_CAP_TRANSMIT ` is not set or if :ref:`CEC_MODE_NO_INITIATOR ` + was specified, the ``EINVAL`` error code is returned in that case. + * .. _`CEC-MODE-EXCL-FOLLOWER`: + + - ``CEC_MODE_EXCL_FOLLOWER`` + - 0x20 + - This is an exclusive follower and only this file descriptor will + receive CEC messages for processing. If someone else is already + the exclusive follower then an attempt to become one will return + the ``EBUSY`` error code. You cannot become a follower if + :ref:`CEC_CAP_TRANSMIT ` is not set or if :ref:`CEC_MODE_NO_INITIATOR ` + was specified, the ``EINVAL`` error code is returned in that case. + * .. _`CEC-MODE-EXCL-FOLLOWER-PASSTHRU`: + + - ``CEC_MODE_EXCL_FOLLOWER_PASSTHRU`` + - 0x30 + - This is an exclusive follower and only this file descriptor will + receive CEC messages for processing. In addition it will put the + CEC device into passthrough mode, allowing the exclusive follower + to handle most core messages instead of relying on the CEC + framework for that. If someone else is already the exclusive + follower then an attempt to become one will return the ``EBUSY`` error + code. You cannot become a follower if :ref:`CEC_CAP_TRANSMIT ` + is not set or if :ref:`CEC_MODE_NO_INITIATOR ` was specified, + the ``EINVAL`` error code is returned in that case. + * .. _`CEC-MODE-MONITOR`: + + - ``CEC_MODE_MONITOR`` + - 0xe0 + - Put the file descriptor into monitor mode. Can only be used in + combination with :ref:`CEC_MODE_NO_INITIATOR `, otherwise EINVAL error + code will be returned. In monitor mode all messages this CEC + device transmits and all messages it receives (both broadcast + messages and directed messages for one its logical addresses) will + be reported. This is very useful for debugging. This is only + allowed if the process has the ``CAP_NET_ADMIN`` capability. If + that is not set, then the ``EPERM`` error code is returned. + * .. _`CEC-MODE-MONITOR-ALL`: + + - ``CEC_MODE_MONITOR_ALL`` + - 0xf0 + - Put the file descriptor into 'monitor all' mode. Can only be used + in combination with :ref:`CEC_MODE_NO_INITIATOR `, otherwise + the ``EINVAL`` error code will be returned. In 'monitor all' mode all messages + this CEC device transmits and all messages it receives, including + directed messages for other CEC devices will be reported. This is + very useful for debugging, but not all devices support this. This + mode requires that the :ref:`CEC_CAP_MONITOR_ALL ` capability is set, + otherwise the ``EINVAL`` error code is returned. This is only allowed if + the process has the ``CAP_NET_ADMIN`` capability. If that is not + set, then the ``EPERM`` error code is returned. Core message processing details: @@ -220,76 +193,58 @@ Core message processing details: :stub-columns: 0 :widths: 1 8 - - - .. _`CEC-MSG-GET-CEC-VERSION`: - - - ``CEC_MSG_GET_CEC_VERSION`` - - - When in passthrough mode this message has to be handled by - userspace, otherwise the core will return the CEC version that was - set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS `. - - - .. _`CEC-MSG-GIVE-DEVICE-VENDOR-ID`: - - - ``CEC_MSG_GIVE_DEVICE_VENDOR_ID`` - - - When in passthrough mode this message has to be handled by - userspace, otherwise the core will return the vendor ID that was - set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS `. - - - .. _`CEC-MSG-ABORT`: - - - ``CEC_MSG_ABORT`` - - - When in passthrough mode this message has to be handled by - userspace, otherwise the core will return a feature refused - message as per the specification. - - - .. _`CEC-MSG-GIVE-PHYSICAL-ADDR`: - - - ``CEC_MSG_GIVE_PHYSICAL_ADDR`` - - - When in passthrough mode this message has to be handled by - userspace, otherwise the core will report the current physical - address. - - - .. _`CEC-MSG-GIVE-OSD-NAME`: - - - ``CEC_MSG_GIVE_OSD_NAME`` - - - When in passthrough mode this message has to be handled by - userspace, otherwise the core will report the current OSD name as - was set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS `. - - - .. _`CEC-MSG-GIVE-FEATURES`: - - - ``CEC_MSG_GIVE_FEATURES`` - - - When in passthrough mode this message has to be handled by - userspace, otherwise the core will report the current features as - was set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS ` - or the message is ignored if the CEC version was older than 2.0. - - - .. _`CEC-MSG-USER-CONTROL-PRESSED`: - - - ``CEC_MSG_USER_CONTROL_PRESSED`` - - - If :ref:`CEC_CAP_RC ` is set, then generate a remote control key - press. This message is always passed on to userspace. - - - .. _`CEC-MSG-USER-CONTROL-RELEASED`: - - - ``CEC_MSG_USER_CONTROL_RELEASED`` - - - If :ref:`CEC_CAP_RC ` is set, then generate a remote control key - release. This message is always passed on to userspace. - - - .. _`CEC-MSG-REPORT-PHYSICAL-ADDR`: - - - ``CEC_MSG_REPORT_PHYSICAL_ADDR`` - - - The CEC framework will make note of the reported physical address - and then just pass the message on to userspace. + * .. _`CEC-MSG-GET-CEC-VERSION`: + + - ``CEC_MSG_GET_CEC_VERSION`` + - When in passthrough mode this message has to be handled by + userspace, otherwise the core will return the CEC version that was + set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS `. + * .. _`CEC-MSG-GIVE-DEVICE-VENDOR-ID`: + + - ``CEC_MSG_GIVE_DEVICE_VENDOR_ID`` + - When in passthrough mode this message has to be handled by + userspace, otherwise the core will return the vendor ID that was + set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS `. + * .. _`CEC-MSG-ABORT`: + + - ``CEC_MSG_ABORT`` + - When in passthrough mode this message has to be handled by + userspace, otherwise the core will return a feature refused + message as per the specification. + * .. _`CEC-MSG-GIVE-PHYSICAL-ADDR`: + + - ``CEC_MSG_GIVE_PHYSICAL_ADDR`` + - When in passthrough mode this message has to be handled by + userspace, otherwise the core will report the current physical + address. + * .. _`CEC-MSG-GIVE-OSD-NAME`: + + - ``CEC_MSG_GIVE_OSD_NAME`` + - When in passthrough mode this message has to be handled by + userspace, otherwise the core will report the current OSD name as + was set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS `. + * .. _`CEC-MSG-GIVE-FEATURES`: + + - ``CEC_MSG_GIVE_FEATURES`` + - When in passthrough mode this message has to be handled by + userspace, otherwise the core will report the current features as + was set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS ` + or the message is ignored if the CEC version was older than 2.0. + * .. _`CEC-MSG-USER-CONTROL-PRESSED`: + + - ``CEC_MSG_USER_CONTROL_PRESSED`` + - If :ref:`CEC_CAP_RC ` is set, then generate a remote control key + press. This message is always passed on to userspace. + * .. _`CEC-MSG-USER-CONTROL-RELEASED`: + + - ``CEC_MSG_USER_CONTROL_RELEASED`` + - If :ref:`CEC_CAP_RC ` is set, then generate a remote control key + release. This message is always passed on to userspace. + * .. _`CEC-MSG-REPORT-PHYSICAL-ADDR`: + + - ``CEC_MSG_REPORT_PHYSICAL_ADDR`` + - The CEC framework will make note of the reported physical address + and then just pass the message on to userspace. diff --git a/Documentation/media/uapi/cec/cec-ioc-receive.rst b/Documentation/media/uapi/cec/cec-ioc-receive.rst index d585b1bba6ac..21a88df3d9d9 100644 --- a/Documentation/media/uapi/cec/cec-ioc-receive.rst +++ b/Documentation/media/uapi/cec/cec-ioc-receive.rst @@ -86,173 +86,98 @@ result. :stub-columns: 0 :widths: 1 1 16 - - - .. row 1 - - - __u64 - - - ``tx_ts`` - - - Timestamp in ns of when the last byte of the message was transmitted. - The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access - the same clock from userspace use :c:func:`clock_gettime`. - - - .. row 2 - - - __u64 - - - ``rx_ts`` - - - Timestamp in ns of when the last byte of the message was received. - The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access - the same clock from userspace use :c:func:`clock_gettime`. - - - .. row 3 - - - __u32 - - - ``len`` - - - The length of the message. For :ref:`ioctl CEC_TRANSMIT ` this is filled in - by the application. The driver will fill this in for - :ref:`ioctl CEC_RECEIVE `. For :ref:`ioctl CEC_TRANSMIT ` it will be - filled in by the driver with the length of the reply message if ``reply`` was set. - - - .. row 4 - - - __u32 - - - ``timeout`` - - - The timeout in milliseconds. This is the time the device will wait - for a message to be received before timing out. If it is set to 0, - then it will wait indefinitely when it is called by :ref:`ioctl CEC_RECEIVE `. - If it is 0 and it is called by :ref:`ioctl CEC_TRANSMIT `, - then it will be replaced by 1000 if the ``reply`` is non-zero or - ignored if ``reply`` is 0. - - - .. row 5 - - - __u32 - - - ``sequence`` - - - A non-zero sequence number is automatically assigned by the CEC framework - for all transmitted messages. It is used by the CEC framework when it queues - the transmit result (when transmit was called in non-blocking mode). This - allows the application to associate the received message with the original - transmit. - - - .. row 6 - - - __u32 - - - ``flags`` - - - Flags. No flags are defined yet, so set this to 0. - - - .. row 7 - - - __u8 - - - ``tx_status`` - - - The status bits of the transmitted message. See - :ref:`cec-tx-status` for the possible status values. It is 0 if - this messages was received, not transmitted. - - - .. row 8 - - - __u8 - - - ``msg[16]`` - - - The message payload. For :ref:`ioctl CEC_TRANSMIT ` this is filled in by the - application. The driver will fill this in for :ref:`ioctl CEC_RECEIVE `. - For :ref:`ioctl CEC_TRANSMIT ` it will be filled in by the driver with - the payload of the reply message if ``timeout`` was set. - - - .. row 8 - - - __u8 - - - ``reply`` - - - Wait until this message is replied. If ``reply`` is 0 and the - ``timeout`` is 0, then don't wait for a reply but return after - transmitting the message. Ignored by :ref:`ioctl CEC_RECEIVE `. - The case where ``reply`` is 0 (this is the opcode for the Feature Abort - message) and ``timeout`` is non-zero is specifically allowed to make it - possible to send a message and wait up to ``timeout`` milliseconds for a - Feature Abort reply. In this case ``rx_status`` will either be set - to :ref:`CEC_RX_STATUS_TIMEOUT ` or - :ref:`CEC_RX_STATUS_FEATURE_ABORT `. - - - .. row 9 - - - __u8 - - - ``rx_status`` - - - The status bits of the received message. See - :ref:`cec-rx-status` for the possible status values. It is 0 if - this message was transmitted, not received, unless this is the - reply to a transmitted message. In that case both ``rx_status`` - and ``tx_status`` are set. - - - .. row 10 - - - __u8 - - - ``tx_status`` - - - The status bits of the transmitted message. See - :ref:`cec-tx-status` for the possible status values. It is 0 if - this messages was received, not transmitted. - - - .. row 11 - - - __u8 - - - ``tx_arb_lost_cnt`` - - - A counter of the number of transmit attempts that resulted in the - Arbitration Lost error. This is only set if the hardware supports - this, otherwise it is always 0. This counter is only valid if the - :ref:`CEC_TX_STATUS_ARB_LOST ` status bit is set. - - - .. row 12 - - - __u8 - - - ``tx_nack_cnt`` - - - A counter of the number of transmit attempts that resulted in the - Not Acknowledged error. This is only set if the hardware supports - this, otherwise it is always 0. This counter is only valid if the - :ref:`CEC_TX_STATUS_NACK ` status bit is set. - - - .. row 13 - - - __u8 - - - ``tx_low_drive_cnt`` - - - A counter of the number of transmit attempts that resulted in the - Arbitration Lost error. This is only set if the hardware supports - this, otherwise it is always 0. This counter is only valid if the - :ref:`CEC_TX_STATUS_LOW_DRIVE ` status bit is set. - - - .. row 14 - - - __u8 - - - ``tx_error_cnt`` - - - A counter of the number of transmit errors other than Arbitration - Lost or Not Acknowledged. This is only set if the hardware - supports this, otherwise it is always 0. This counter is only - valid if the :ref:`CEC_TX_STATUS_ERROR ` status bit is set. + * - __u64 + - ``tx_ts`` + - Timestamp in ns of when the last byte of the message was transmitted. + The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access + the same clock from userspace use :c:func:`clock_gettime`. + * - __u64 + - ``rx_ts`` + - Timestamp in ns of when the last byte of the message was received. + The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access + the same clock from userspace use :c:func:`clock_gettime`. + * - __u32 + - ``len`` + - The length of the message. For :ref:`ioctl CEC_TRANSMIT ` this is filled in + by the application. The driver will fill this in for + :ref:`ioctl CEC_RECEIVE `. For :ref:`ioctl CEC_TRANSMIT ` it will be + filled in by the driver with the length of the reply message if ``reply`` was set. + * - __u32 + - ``timeout`` + - The timeout in milliseconds. This is the time the device will wait + for a message to be received before timing out. If it is set to 0, + then it will wait indefinitely when it is called by :ref:`ioctl CEC_RECEIVE `. + If it is 0 and it is called by :ref:`ioctl CEC_TRANSMIT `, + then it will be replaced by 1000 if the ``reply`` is non-zero or + ignored if ``reply`` is 0. + * - __u32 + - ``sequence`` + - A non-zero sequence number is automatically assigned by the CEC framework + for all transmitted messages. It is used by the CEC framework when it queues + the transmit result (when transmit was called in non-blocking mode). This + allows the application to associate the received message with the original + transmit. + * - __u32 + - ``flags`` + - Flags. No flags are defined yet, so set this to 0. + * - __u8 + - ``tx_status`` + - The status bits of the transmitted message. See + :ref:`cec-tx-status` for the possible status values. It is 0 if + this messages was received, not transmitted. + * - __u8 + - ``msg[16]`` + - The message payload. For :ref:`ioctl CEC_TRANSMIT ` this is filled in by the + application. The driver will fill this in for :ref:`ioctl CEC_RECEIVE `. + For :ref:`ioctl CEC_TRANSMIT ` it will be filled in by the driver with + the payload of the reply message if ``timeout`` was set. + * - __u8 + - ``reply`` + - Wait until this message is replied. If ``reply`` is 0 and the + ``timeout`` is 0, then don't wait for a reply but return after + transmitting the message. Ignored by :ref:`ioctl CEC_RECEIVE `. + The case where ``reply`` is 0 (this is the opcode for the Feature Abort + message) and ``timeout`` is non-zero is specifically allowed to make it + possible to send a message and wait up to ``timeout`` milliseconds for a + Feature Abort reply. In this case ``rx_status`` will either be set + to :ref:`CEC_RX_STATUS_TIMEOUT ` or + :ref:`CEC_RX_STATUS_FEATURE_ABORT `. + * - __u8 + - ``rx_status`` + - The status bits of the received message. See + :ref:`cec-rx-status` for the possible status values. It is 0 if + this message was transmitted, not received, unless this is the + reply to a transmitted message. In that case both ``rx_status`` + and ``tx_status`` are set. + * - __u8 + - ``tx_status`` + - The status bits of the transmitted message. See + :ref:`cec-tx-status` for the possible status values. It is 0 if + this messages was received, not transmitted. + * - __u8 + - ``tx_arb_lost_cnt`` + - A counter of the number of transmit attempts that resulted in the + Arbitration Lost error. This is only set if the hardware supports + this, otherwise it is always 0. This counter is only valid if the + :ref:`CEC_TX_STATUS_ARB_LOST ` status bit is set. + * - __u8 + - ``tx_nack_cnt`` + - A counter of the number of transmit attempts that resulted in the + Not Acknowledged error. This is only set if the hardware supports + this, otherwise it is always 0. This counter is only valid if the + :ref:`CEC_TX_STATUS_NACK ` status bit is set. + * - __u8 + - ``tx_low_drive_cnt`` + - A counter of the number of transmit attempts that resulted in the + Arbitration Lost error. This is only set if the hardware supports + this, otherwise it is always 0. This counter is only valid if the + :ref:`CEC_TX_STATUS_LOW_DRIVE ` status bit is set. + * - __u8 + - ``tx_error_cnt`` + - A counter of the number of transmit errors other than Arbitration + Lost or Not Acknowledged. This is only set if the hardware + supports this, otherwise it is always 0. This counter is only + valid if the :ref:`CEC_TX_STATUS_ERROR ` status bit is set. .. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}| @@ -264,64 +189,46 @@ result. :stub-columns: 0 :widths: 3 1 16 - - - .. _`CEC-TX-STATUS-OK`: - - - ``CEC_TX_STATUS_OK`` - - - 0x01 - - - The message was transmitted successfully. This is mutually - exclusive with :ref:`CEC_TX_STATUS_MAX_RETRIES `. Other bits can still - be set if earlier attempts met with failure before the transmit - was eventually successful. - - - .. _`CEC-TX-STATUS-ARB-LOST`: - - - ``CEC_TX_STATUS_ARB_LOST`` - - - 0x02 - - - CEC line arbitration was lost. - - - .. _`CEC-TX-STATUS-NACK`: - - - ``CEC_TX_STATUS_NACK`` - - - 0x04 - - - Message was not acknowledged. - - - .. _`CEC-TX-STATUS-LOW-DRIVE`: - - - ``CEC_TX_STATUS_LOW_DRIVE`` - - - 0x08 - - - Low drive was detected on the CEC bus. This indicates that a - follower detected an error on the bus and requests a - retransmission. - - - .. _`CEC-TX-STATUS-ERROR`: - - - ``CEC_TX_STATUS_ERROR`` - - - 0x10 - - - Some error occurred. This is used for any errors that do not fit - the previous two, either because the hardware could not tell which - error occurred, or because the hardware tested for other - conditions besides those two. - - - .. _`CEC-TX-STATUS-MAX-RETRIES`: - - - ``CEC_TX_STATUS_MAX_RETRIES`` - - - 0x20 - - - The transmit failed after one or more retries. This status bit is - mutually exclusive with :ref:`CEC_TX_STATUS_OK `. Other bits can still - be set to explain which failures were seen. + * .. _`CEC-TX-STATUS-OK`: + + - ``CEC_TX_STATUS_OK`` + - 0x01 + - The message was transmitted successfully. This is mutually + exclusive with :ref:`CEC_TX_STATUS_MAX_RETRIES `. Other bits can still + be set if earlier attempts met with failure before the transmit + was eventually successful. + * .. _`CEC-TX-STATUS-ARB-LOST`: + + - ``CEC_TX_STATUS_ARB_LOST`` + - 0x02 + - CEC line arbitration was lost. + * .. _`CEC-TX-STATUS-NACK`: + + - ``CEC_TX_STATUS_NACK`` + - 0x04 + - Message was not acknowledged. + * .. _`CEC-TX-STATUS-LOW-DRIVE`: + + - ``CEC_TX_STATUS_LOW_DRIVE`` + - 0x08 + - Low drive was detected on the CEC bus. This indicates that a + follower detected an error on the bus and requests a + retransmission. + * .. _`CEC-TX-STATUS-ERROR`: + + - ``CEC_TX_STATUS_ERROR`` + - 0x10 + - Some error occurred. This is used for any errors that do not fit + the previous two, either because the hardware could not tell which + error occurred, or because the hardware tested for other + conditions besides those two. + * .. _`CEC-TX-STATUS-MAX-RETRIES`: + + - ``CEC_TX_STATUS_MAX_RETRIES`` + - 0x20 + - The transmit failed after one or more retries. This status bit is + mutually exclusive with :ref:`CEC_TX_STATUS_OK `. Other bits can still + be set to explain which failures were seen. .. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}| @@ -333,32 +240,23 @@ result. :stub-columns: 0 :widths: 3 1 16 + * .. _`CEC-RX-STATUS-OK`: - - .. _`CEC-RX-STATUS-OK`: - - - ``CEC_RX_STATUS_OK`` - - - 0x01 - - - The message was received successfully. - - - .. _`CEC-RX-STATUS-TIMEOUT`: - - - ``CEC_RX_STATUS_TIMEOUT`` - - - 0x02 - - - The reply to an earlier transmitted message timed out. - - - .. _`CEC-RX-STATUS-FEATURE-ABORT`: - - - ``CEC_RX_STATUS_FEATURE_ABORT`` + - ``CEC_RX_STATUS_OK`` + - 0x01 + - The message was received successfully. + * .. _`CEC-RX-STATUS-TIMEOUT`: - - 0x04 + - ``CEC_RX_STATUS_TIMEOUT`` + - 0x02 + - The reply to an earlier transmitted message timed out. + * .. _`CEC-RX-STATUS-FEATURE-ABORT`: - - The message was received successfully but the reply was - ``CEC_MSG_FEATURE_ABORT``. This status is only set if this message - was the reply to an earlier transmitted message. + - ``CEC_RX_STATUS_FEATURE_ABORT`` + - 0x04 + - The message was received successfully but the reply was + ``CEC_MSG_FEATURE_ABORT``. This status is only set if this message + was the reply to an earlier transmitted message. -- cgit v1.2.1