summaryrefslogtreecommitdiffstats
path: root/net/openvswitch
Commit message (Collapse)AuthorAgeFilesLines
...
* openvswitch: Eliminate memset() from flow_extract.Jesse Gross2014-10-061-9/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As new protocols are added, the size of the flow key tends to increase although few protocols care about all of the fields. In order to optimize this for hashing and matching, OVS uses a variable length portion of the key. However, when fields are extracted from the packet we must still zero out the entire key. This is no longer necessary now that OVS implements masking. Any fields (or holes in the structure) which are not part of a given protocol will be by definition not part of the mask and zeroed out during lookup. Furthermore, since masking already uses variable length keys this zeroing operation automatically benefits as well. In principle, the only thing that needs to be done at this point is remove the memset() at the beginning of flow. However, some fields assume that they are initialized to zero, which now must be done explicitly. In addition, in the event of an error we must also zero out corresponding fields to signal that there is no valid data present. These increase the total amount of code but very little of it is executed in non-error situations. Removing the memset() reduces the profile of ovs_flow_extract() from 0.64% to 0.56% when tested with large packets on a 10G link. Suggested-by: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/openvswitch: remove dup comment in vport.hWang Sheng-Hui2014-09-261-1/+0
| | | | | | | | | | Remove the duplicated comment "/* The following definitions are for users of the vport subsytem: */" in vport.h Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-09-231-4/+5
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: arch/mips/net/bpf_jit.c drivers/net/can/flexcan.c Both the flexcan and MIPS bpf_jit conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * openvswitch: restore OVS_FLOW_CMD_NEW notificationsSamuel Gauthier2014-09-191-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Since commit fb5d1e9e127a ("openvswitch: Build flow cmd netlink reply only if needed."), the new flows are not notified to the listeners of OVS_FLOW_MCGROUP. This commit fixes the problem by using the genl function, ie genl_has_listerners() instead of netlink_has_listeners(). Signed-off-by: Samuel Gauthier <samuel.gauthier@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | openvswitch: Add recirc and hash action.Andy Zhou2014-09-156-12/+262
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recirc action allows a packet to reenter openvswitch processing. currently openvswitch lookup flow for packet received and execute set of actions on that packet, with help of recirc action we can process/modify the packet and recirculate it back in openvswitch for another pass. OVS hash action calculates 5-tupple hash and set hash in flow-key hash. This can be used along with recirculation for distributing packets among different ports for bond devices. For example: OVS bonding can use following actions: Match on: bond flow; Action: hash, recirc(id) Match on: recirc-id == id and hash lower bits == a; Action: output port_bond_a Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* | openvswitch: simplify sample action implementationAndy Zhou2014-09-151-24/+18
| | | | | | | | | | | | | | | | | | The current sample() function implementation is more complicated than necessary in handling single user space action optimization and skb reference counting. There is no functional changes. Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* | openvswitch: Use tun_key only for egress tunnel path.Pravin B Shelar2014-09-158-47/+50
| | | | | | | | | | | | | | | | | | Currently tun_key is used for passing tunnel information on ingress and egress path, this cause confusion. Following patch removes its use on ingress path make it egress only parameter. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Andy Zhou <azhou@nicira.com>
* | openvswitch: refactor ovs flow extract API.Pravin B Shelar2014-09-157-41/+71
| | | | | | | | | | | | | | | | | | OVS flow extract is called on packet receive or packet execute code path. Following patch defines separate API for extracting flow-key in packet execute code path. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Andy Zhou <azhou@nicira.com>
* | openvswitch: Remove pkt_key from OVS_CBPravin B Shelar2014-09-153-17/+16
| | | | | | | | | | | | | | | | OVS keeps pointer to packet key in skb->cb, but the packet key is store on stack. This could make code bit tricky. So it is better to get rid of the pointer. Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* | openvswitch: change the data type of error status to atomic_long_tLi RongQing2014-09-092-23/+12
| | | | | | | | | | | | | | | | | | | | | | Change the date type of error status from u64 to atomic_long_t, and use atomic operation, then remove the lock which is used to protect the error status. The operation of atomic maybe faster than spin lock. Cc: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-09-071-3/+8
|\ \ | |/
| * openvswitch: distinguish between the dropped and consumed skbLi RongQing2014-09-031-2/+5
| | | | | | | | | | | | | | | | | | | | | | distinguish between the dropped and consumed skb, not assume the skb is consumed always Cc: Thomas Graf <tgraf@noironetworks.com> Cc: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * openvswitch: fix a memory leakLi RongQing2014-09-021-1/+3
| | | | | | | | | | | | | | | | | | | | The user_skb maybe be leaked if the operation on it failed and codes skipped into the label "out:" without calling genlmsg_unicast. Cc: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-08-231-0/+5
|\ \ | |/ | | | | | | | | | | Pulling to get some TIPC fixes that a net-next series depends upon. Signed-off-by: David S. Miller <davem@davemloft.net>
| * openvswitch: fix panic with multiple vlan headersJiri Benc2014-08-221-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When there are multiple vlan headers present in a received frame, the first one is put into vlan_tci and protocol is set to ETH_P_8021Q. Anything in the skb beyond the VLAN TPID may be still non-linear, including the inner TCI and ethertype. While ovs_flow_extract takes care of IP and IPv6 headers, it does nothing with ETH_P_8021Q. Later, if OVS_ACTION_ATTR_POP_VLAN is executed, __pop_vlan_tci pulls the next vlan header into vlan_tci. This leads to two things: 1. Part of the resulting ethernet header is in the non-linear part of the skb. When eth_type_trans is called later as the result of OVS_ACTION_ATTR_OUTPUT, kernel BUGs in __skb_pull. Also, __pop_vlan_tci is in fact accessing random data when it reads past the TPID. 2. network_header points into the ethernet header instead of behind it. mac_len is set to a wrong value (10), too. Reported-by: Yulong Pei <ypei@redhat.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/openvswitch/flow.c: Replace rcu_dereference() with rcu_access_pointer()Andreea-Cristina Bernat2014-08-221-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "rcu_dereference()" call is used directly in a condition. Since its return value is never dereferenced it is recommended to use "rcu_access_pointer()" instead of "rcu_dereference()". Therefore, this patch makes the replacement. The following Coccinelle semantic patch was used: @@ @@ ( if( (<+... - rcu_dereference + rcu_access_pointer (...) ...+>)) {...} | while( (<+... - rcu_dereference + rcu_access_pointer (...) ...+>)) {...} ) Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* openvswitch: Fix memory leak in ovs_vport_alloc() error pathChristoph Jaeger2014-08-131-1/+3
| | | | | | | | | | ovs_vport_alloc() bails out without freeing the memory 'vport' points to. Picked up by Coverity - CID 1230503. Fixes: 5cd667b0a4 ("openvswitch: Allow each vport to have an array of 'port_id's.") Signed-off-by: Christoph Jaeger <cj@linux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* openvswitch: fix duplicate #include headersJean Sacren2014-08-071-2/+0
| | | | | | | | | | The #include headers net/genetlink.h and linux/genetlink.h both were included twice, so delete each of the duplicate. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Cc: Pravin Shelar <pshelar@nicira.com> Cc: dev@openvswitch.org Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove unlikely() for WARN_ON() conditionsThomas Graf2014-07-301-1/+1
| | | | | | | | No need for the unlikely(), WARN_ON() and BUG_ON() internally use unlikely() on the condition. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* openvswitch: Use IS_ERR_OR_NULLHimangi Saraogi2014-07-291-1/+1
| | | | | | | | | | | | | | | | | | | | This patch introduces the use of the macro IS_ERR_OR_NULL in place of tests for NULL and IS_ERR. The following Coccinelle semantic patch was used for making the change: @@ expression e; @@ - e == NULL || IS_ERR(e) + IS_ERR_OR_NULL(e) || ... Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* openvswitch: Add skb_clone NULL check for the sampling action.Andy Zhou2014-07-241-0/+2
| | | | | | | | Fix a bug where skb_clone() NULL check is missing in sample action implementation. Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* openvswitch: Sample action without side effectsSimon Horman2014-07-241-11/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sample action is rather generic, allowing arbitrary actions to be executed based on a probability. However its use, within the Open vSwitch code-base is limited: only a single user-space action is ever nested. A consequence of the current implementation of sample actions is that depending on weather the sample action executed (due to its probability) any side-effects of nested actions may or may not be present before executing subsequent actions. This has the potential to complicate verification of valid actions by the (kernel) datapath. And indeed adding support for push and pop MPLS actions inside sample actions is one case where such case. In order to allow all supported actions to be continue to be nested inside sample actions without the potential need for complex verification code this patch changes the implementation of the sample action in the kernel datapath so that sample actions are more like a function call and any side effects of nested actions are not present when executing subsequent actions. With the above in mind the motivation for this change is twofold: * To contain side-effects the sample action in the hope of making it easier to deal with in the future and; * To avoid some rather complex verification code introduced in the MPLS datapath patch. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* openvswitch: Avoid memory corruption in queue_userspace_packet()Andy Zhou2014-07-241-1/+2
| | | | | | | | | | | | In queue_userspace_packet(), the ovs_nla_put_flow return value is not checked. This is fine as long as key_attr_size() returns the correct value. In case it does not, the current code may corrupt buffer memory. Add a run time assertion catch this case to avoid silent failure. Reported-by: Ben Pfaff <blp@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* openvswitch: Enable tunnel GSO for OVS bridge.Pravin B Shelar2014-07-241-1/+4
| | | | | | | | | Following patch enables all available tunnel GSO features for OVS bridge device so that ovs can use hardware offloads available to underling device. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Andy Zhou <azhou@nicira.com>
* openvswitch: Allow each vport to have an array of 'port_id's.Alex Wang2014-07-243-12/+139
| | | | | | | | | | | In order to allow handlers directly read upcalls from datapath, we need to support per-handler netlink socket for each vport in datapath. This commit makes this happen. Also, it is guaranteed to be backward compatible with previous branch. Signed-off-by: Alex Wang <alexw@nicira.com> Acked-by: Thomas Graf <tgraf@redhat.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* openvswitch: make generic netlink group conststephen hemminger2014-07-161-9/+9
| | | | | | | Generic netlink tables can be const. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-07-167-19/+55
|\ | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * openvswitch: Use exact lookup for flow_get and flow_del.Alex Wang2014-06-303-13/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to the race condition in userspace, there is chance that two overlapping megaflows could be installed in datapath. And this causes userspace unable to delete the less inclusive megaflow flow even after it timeout, since the flow_del logic will stop at the first match of masked flow. This commit fixes the bug by making the kernel flow_del and flow_get logic check all masks in that case. Introduced by 03f0d916a (openvswitch: Mega flow implementation). Signed-off-by: Alex Wang <alexw@nicira.com> Acked-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
| * openvswitch: Fix tracking of flags seen in TCP flows.Ben Pfaff2014-06-293-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Flow statistics need to take into account the TCP flags from the packet currently being processed (in 'key'), not the TCP flags matched by the flow found in the kernel flow table (in 'flow'). This bug made the Open vSwitch userspace fin_timeout action have no effect in many cases. This bug is introduced by commit 88d73f6c411ac2f0578 (openvswitch: Use TCP flags in the flow key for stats.) Reported-by: Len Gao <leng@vmware.com> Signed-off-by: Ben Pfaff <blp@nicira.com> Acked-by: Jarno Rajahalme <jrajahalme@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
| * openvswitch: supply a dummy err_handler of gre_cisco_protocol to prevent ↵Wei Zhang2014-06-291-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | kernel crash When use gre vport, openvswitch register a gre_cisco_protocol but does not supply a err_handler with it. The gre_cisco_err() in net/ipv4/gre_demux.c expect err_handler be provided with the gre_cisco_protocol implementation, and call ->err_handler() without existence check, cause the kernel crash. This patch provide a err_handler to fix this bug. This bug introduced by commit aa310701e787087d (openvswitch: Add gre tunnel support.) Signed-off-by: Wei Zhang <asuka.com@163.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
| * openvswitch: Fix a double free bug for the sample actionAndy Zhou2014-06-291-0/+2
| | | | | | | | | | | | | | | | | | | | When sample action returns with an error, the skb has already been freed. This patch fix a bug to make sure we don't free it again. This bug introduced by commit ccb1352e76cff05 (net: Add Open vSwitch kernel components.) Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* | net: set name_assign_type in alloc_netdev()Tom Gundersen2014-07-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | vxlan: Call udp_flow_src_portTom Herbert2014-07-071-4/+1
| | | | | | | | | | | | | | | | | | In vxlan and OVS vport-vxlan call common function to get source port for a UDP tunnel. Removed vxlan_src_port since the functionality is now in udp_flow_src_port. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | openvswitch: introduce rtnl ops stubJiri Pirko2014-07-013-1/+26
|/ | | | | | | | This stub now allows userspace to see IFLA_INFO_KIND for ovs master and IFLA_INFO_SLAVE_KIND for slave. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
* vxlan: Add support for UDP checksums (v4 sending, v6 zero csums)Tom Herbert2014-06-041-1/+1
| | | | | | | | | | | Added VXLAN link configuration for sending UDP checksums, and allowing TX and RX of UDP6 checksums. Also, call common iptunnel_handle_offloads and added GSO support for checksums. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* openvswitch: Simplify genetlink code.Pravin B Shelar2014-05-221-95/+90
| | | | | | | | | Following patch get rid of struct genl_family_and_ops which is redundant due to changes to struct genl_family. Signed-off-by: Kyle Mestery <mestery@noironetworks.com> Acked-by: Kyle Mestery <mestery@noironetworks.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* openvswitch: Minimize ovs_flow_cmd_new|set critical sections.Jarno Rajahalme2014-05-221-76/+116
| | | | | Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* openvswitch: Split ovs_flow_cmd_new_or_set().Jarno Rajahalme2014-05-221-44/+116
| | | | | | | | Following patch will be easier to reason about with separate ovs_flow_cmd_new() and ovs_flow_cmd_set() functions. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* openvswitch: Minimize ovs_flow_cmd_del critical section.Jarno Rajahalme2014-05-221-25/+28
| | | | | | | | | | ovs_flow_cmd_del() now allocates reply (if needed) after the flow has already been removed from the flow table. If the reply allocation fails, a netlink error is signaled with netlink_set_err(), as is already done in ovs_flow_cmd_new_or_set() in the similar situation. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* openvswitch: Reduce locking requirements.Jarno Rajahalme2014-05-221-25/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce and clarify locking requirements for ovs_flow_cmd_alloc_info(), ovs_flow_cmd_fill_info() and ovs_flow_cmd_build_info(). A datapath pointer is available only when holding a lock. Change ovs_flow_cmd_fill_info() and ovs_flow_cmd_build_info() to take a dp_ifindex directly, rather than a datapath pointer that is then (only) used to get the dp_ifindex. This is useful, since the dp_ifindex is available even when the datapath pointer is not, both before and after taking a lock, which makes further critical section reduction possible. Make ovs_flow_cmd_alloc_info() take an 'acts' argument instead a 'flow' pointer. This allows some future patches to do the allocation before acquiring the flow pointer. The locking requirements after this patch are: ovs_flow_cmd_alloc_info(): May be called without locking, must not be called while holding the RCU read lock (due to memory allocation). If 'acts' belong to a flow in the flow table, however, then the caller must hold ovs_mutex. ovs_flow_cmd_fill_info(): Either ovs_mutex or RCU read lock must be held. ovs_flow_cmd_build_info(): This calls both of the above, so the caller must hold ovs_mutex. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* openvswitch: Fix ovs_flow_stats_get/clear RCU dereference.Jarno Rajahalme2014-05-222-7/+9
| | | | | | | | | | | | | | For ovs_flow_stats_get() using ovsl_dereference() was wrong, since flow dumps call this with RCU read lock. ovs_flow_stats_clear() is always called with ovs_mutex, so can use ovsl_dereference(). Also, make the ovs_flow_stats_get() 'flow' argument const to make later patches cleaner. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* openvswitch: Fix typo.Jarno Rajahalme2014-05-221-1/+1
| | | | | | | | Incorrect struct name was confusing, even though otherwise inconsequental. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* openvswitch: Minimize dp and vport critical sections.Jarno Rajahalme2014-05-221-108/+110
| | | | | | | | | | | | | | Move most memory allocations away from the ovs_mutex critical sections. vport allocations still happen while the lock is taken, as changing that would require major refactoring. Also, vports are created very rarely so it should not matter. Change ovs_dp_cmd_get() now only takes the rcu_read_lock(), rather than ovs_lock(), as nothing need to be changed. This was done by ovs_vport_cmd_get() already. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* openvswitch: Make flow mask removal symmetric.Jarno Rajahalme2014-05-221-19/+25
| | | | | | | | | | | | Masks are inserted when flows are inserted to the table, so it is logical to correspondingly remove masks when flows are removed from the table, in ovs_flow_table_remove(). This allows ovs_flow_free() to be called without locking, which will be used by later patches. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* openvswitch: Build flow cmd netlink reply only if needed.Jarno Rajahalme2014-05-221-22/+48
| | | | | | | | | | | Use netlink_has_listeners() and NLM_F_ECHO flag to determine if a reply is needed or not for OVS_FLOW_CMD_NEW, OVS_FLOW_CMD_SET, or OVS_FLOW_CMD_DEL. Currently, OVS userspace does not request a reply for OVS_FLOW_CMD_NEW, but usually does for OVS_FLOW_CMD_DEL, as stats may have changed. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* openvswitch: Clarify locking.Jarno Rajahalme2014-05-222-7/+9
| | | | | | | | | Remove unnecessary locking from functions that are always called with appropriate locking. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Thomas Graf <tgraf@redhat.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* openvswitch: Avoid assigning a NULL pointer to flow actions.Jarno Rajahalme2014-05-221-6/+8
| | | | | | | | | | | | Flow SET can accept an empty set of actions, with the intended semantics of leaving existing actions unmodified. This seems to have been brokin after OVS 1.7, as we have assigned the flow's actions pointer to NULL in this case, but we never check for the NULL pointer later on. This patch restores the intended behavior and documents it in the include/linux/openvswitch.h. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* openvswitch: Compact sw_flow_key.Jarno Rajahalme2014-05-223-123/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Minimize padding in sw_flow_key and move 'tp' top the main struct. These changes simplify code when accessing the transport port numbers and the tcp flags, and makes the sw_flow_key 8 bytes smaller on 64-bit systems (128->120 bytes). These changes also make the keys for IPv4 packets to fit in one cache line. There is a valid concern for safety of packing the struct ovs_key_ipv4_tunnel, as it would be possible to take the address of the tun_id member as a __be64 * which could result in unaligned access in some systems. However: - sw_flow_key itself is 64-bit aligned, so the tun_id within is always 64-bit aligned. - We never make arrays of ovs_key_ipv4_tunnel (which would force every second tun_key to be misaligned). - We never take the address of the tun_id in to a __be64 *. - Whereever we use struct ovs_key_ipv4_tunnel outside the sw_flow_key, it is in stack (on tunnel input functions), where compiler has full control of the alignment. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
* net/openvswitch: Use with RCU_INIT_POINTER(x, NULL) in vport-gre.cMonam Agarwal2014-05-161-1/+1
| | | | | | | | | | | | This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL) The rcu_assign_pointer() ensures that the initialization of a structure is carried out before storing a pointer to that structure. And in the case of the NULL pointer, there is no structure to initialize. So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL) Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
* openvswitch: Use TCP flags in the flow key for stats.Jarno Rajahalme2014-05-161-7/+5
| | | | | | | | | We already extract the TCP flags for the key, might as well use that for stats. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
OpenPOWER on IntegriCloud