summaryrefslogtreecommitdiffstats
path: root/net/ipv6/sysctl_net_ipv6.c
Commit message (Collapse)AuthorAgeFilesLines
* calipso: Add a label cache.Huw Davies2016-06-271-0/+19
| | | | | | | | | | | | | | This works in exactly the same way as the CIPSO label cache. The idea is to allow the lsm to cache the result of a secattr lookup so that it doesn't need to perform the lookup for every skbuff. It introduces two sysctl controls: calipso_cache_enable - enables/disables the cache. calipso_cache_bucket_size - sets the size of a cache bucket. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
* ipv6: Implement different admin modes for automatic flow labelsTom Herbert2015-07-311-1/+6
| | | | | | | | | | | | | | | Change the meaning of net.ipv6.auto_flowlabels to provide a mode for automatic flow labels generation. There are four modes: 0: flow labels are disabled 1: flow labels are enabled, sockets can opt-out 2: flow labels are allowed, sockets can opt-in 3: flow labels are enabled and enforced, no opt-out for sockets np->autoflowlabel is initialized according to the sysctl value. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Nonlocal bindTom Herbert2015-07-091-0/+8
| | | | | | | | | | | | | | | | | | | | | | Add support to allow non-local binds similar to how this was done for IPv4. Non-local binds are very useful in emulating the Internet in a box, etc. This add the ip_nonlocal_bind sysctl under ipv6. Testing: Set up nonlocal binding and receive routing on a host, e.g.: ip -6 rule add from ::/0 iif eth0 lookup 200 ip -6 route add local 2001:0:0:1::/64 dev lo proto kernel scope host table 200 sysctl -w net.ipv6.ip_nonlocal_bind=1 Set up routing to 2001:0:0:1::/64 on peer to go to first host ping6 -I 2001:0:0:1::1 peer-address -- to verify Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Flow label state rangesTom Herbert2015-05-031-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch divides the IPv6 flow label space into two ranges: 0-7ffff is reserved for flow label manager, 80000-fffff will be used for creating auto flow labels (per RFC6438). This only affects how labels are set on transmit, it does not affect receive. This range split can be disbaled by systcl. Background: IPv6 flow labels have been an unmitigated disappointment thus far in the lifetime of IPv6. Support in HW devices to use them for ECMP is lacking, and OSes don't turn them on by default. If we had these we could get much better hashing in IPv6 networks without resorting to DPI, possibly eliminating some of the motivations to to define new encaps in UDP just for getting ECMP. Unfortunately, the initial specfications of IPv6 did not clarify how they are to be used. There has always been a vague concept that these can be used for ECMP, flow hashing, etc. and we do now have a good standard how to this in RFC6438. The problem is that flow labels can be either stateful or stateless (as in RFC6438), and we are presented with the possibility that a stateless label may collide with a stateful one. Attempts to split the flow label space were rejected in IETF. When we added support in Linux for RFC6438, we could not turn on flow labels by default due to this conflict. This patch splits the flow label space and should give us a path to enabling auto flow labels by default for all IPv6 packets. This is an API change so we need to consider compatibility with existing deployment. The stateful range is chosen to be the lower values in hopes that most uses would have chosen small numbers. Once we resolve the stateless/stateful issue, we can proceed to look at enabling RFC6438 flow labels by default (starting with scaled testing). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: coding style: comparison for equality with NULLIan Morris2015-03-311-1/+1
| | | | | | | | | | | | The ipv6 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x == NULL and sometimes as !x. !x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: introduce idgen_delay and idgen_retries knobsHannes Frederic Sowa2015-03-231-0/+16
| | | | | | | | | | | This is specified by RFC 7217. Cc: Erik Kline <ek@google.com> Cc: Fernando Gont <fgont@si6networks.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: add sysctl_mld_qrv to configure query robustness variableHannes Frederic Sowa2014-09-041-0/+10
| | | | | | | | | | | | | | | | | | | This patch adds a new sysctl_mld_qrv knob to configure the mldv1/v2 query robustness variable. It specifies how many retransmit of unsolicited mld retransmit should happen. Admins might want to tune this on lossy links. Also reset mld state on interface down/up, so we pick up new sysctl settings during interface up event. IPv6 certification requests this knob to be available. I didn't make this knob netns specific, as it is mostly a setting in a physical environment and should be per host. Cc: Flavio Leitner <fbl@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-08-051-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/Makefile net/ipv6/sysctl_net_ipv6.c Two ipv6_table_template[] additions overlap, so the index of the ipv6_table[x] assignments needed to be adjusted. In the drivers/net/Makefile case, we've gotten rid of the garbage whereby we had to list every single USB networking driver in the top-level Makefile, there is just one "USB_NETWORKING" that guards everything. Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv6: data of fwmark_reflect sysctl needs to be updated on netns constructionHannes Frederic Sowa2014-08-021-0/+1
| | | | | | | | | | | | | | Fixes: e110861f86094cd ("net: add a sysctl to reflect the fwmark on replies") Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: Implement automatic flow label generation on transmitTom Herbert2014-07-071-0/+8
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Automatically generate flow labels for IPv6 packets on transmit. The flow label is computed based on skb_get_hash. The flow label will only automatically be set when it is zero otherwise (i.e. flow label manager hasn't set one). This supports the transmit side functionality of RFC 6438. Added an IPv6 sysctl auto_flowlabels to enable/disable this behavior system wide, and added IPV6_AUTOFLOWLABEL socket option to enable this functionality per socket. By default, auto flowlabels are disabled to avoid possible conflicts with flow label manager, however if this feature proves useful we may want to enable it by default. It should also be noted that FreeBSD has already implemented automatic flow labels (including the sysctl and socket option). In FreeBSD, automatic flow labels default to enabled. Performance impact: Running super_netperf with 200 flows for TCP_RR and UDP_RR for IPv6. Note that in UDP case, __skb_get_hash will be called for every packet with explains slight regression. In the TCP case the hash is saved in the socket so there is no regression. Automatic flow labels disabled: TCP_RR: 86.53% CPU utilization 127/195/322 90/95/99% latencies 1.40498e+06 tps UDP_RR: 90.70% CPU utilization 118/168/243 90/95/99% latencies 1.50309e+06 tps Automatic flow labels enabled: TCP_RR: 85.90% CPU utilization 128/199/337 90/95/99% latencies 1.40051e+06 UDP_RR 92.61% CPU utilization 115/164/236 90/95/99% latencies 1.4687e+06 Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: add a sysctl to reflect the fwmark on repliesLorenzo Colitti2014-05-131-0/+7
| | | | | | | | | | | | | | | | | | Kernel-originated IP packets that have no user socket associated with them (e.g., ICMP errors and echo replies, TCP RSTs, etc.) are emitted with a mark of zero. Add a sysctl to make them have the same mark as the packet they are replying to. This allows an administrator that wishes to do so to use mark-based routing, firewalling, etc. for these replies by marking the original packets inbound. Tested using user-mode linux: - ICMP/ICMPv6 echo replies and errors. - TCP RST packets (IPv4 and IPv6). Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: add flowlabel_consistency sysctlFlorent Fourcot2014-01-191-0/+8
| | | | | | | | | | | | | | | With the introduction of IPV6_FL_F_REFLECT, there is no guarantee of flow label unicity. This patch introduces a new sysctl to protect the old behaviour, enable by default. Changelog of V3: * rename ip6_flowlabel_consistency to flowlabel_consistency * use net_info_ratelimited() * checkpatch cleanups Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* IPv6: move the anycast_src_echo_reply sysctl to netns_sysctl_ipv6FX Le Bail2014-01-141-2/+2
| | | | | | | | | This change move anycast_src_echo_reply sysctl with other ipv6 sysctls. Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* IPv6: add the option to use anycast addresses as source addresses in echo replyFX Le Bail2014-01-071-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | This change allows to follow a recommandation of RFC4942. - Add "anycast_src_echo_reply" sysctl to control the use of anycast addresses as source addresses for ICMPv6 echo reply. This sysctl is false by default to preserve existing behavior. - Add inline check ipv6_anycast_destination(). - Use them in icmpv6_echo_reply(). Reference: RFC4942 - IPv6 Transition/Coexistence Security Considerations (http://tools.ietf.org/html/rfc4942#section-2.1.6) 2.1.6. Anycast Traffic Identification and Security [...] To avoid exposing knowledge about the internal structure of the network, it is recommended that anycast servers now take advantage of the ability to return responses with the anycast address as the source address if possible. Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Convert uses of typedef ctl_table to struct ctl_tableJoe Perches2013-06-131-2/+2
| | | | | | | | | | | | | | | | Reduce the uses of this unnecessary typedef. Done via perl script: $ git grep --name-only -w ctl_table net | \ xargs perl -p -i -e '\ sub trim { my ($local) = @_; $local =~ s/(^\s+|\s+$)//g; return $local; } \ s/\b(?<!struct\s)ctl_table\b(\s*\*\s*|\s+\w+)/"struct ctl_table " . trim($1)/ge' Reflow the modified lines that now exceed 80 columns. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Delete all remaining instances of ctl_pathEric W. Biederman2012-04-201-7/+0
| | | | | | | | We don't use struct ctl_path anymore so delete the exported constants. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net ipv6: Don't use sysctl tables with .child entries.Eric W. Biederman2012-04-201-24/+23
| | | | | | | | | | | The sysctl core no longer natively understands sysctl tables with .child entries. Split the ipv6_table to remove the .child entries. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net ipv6: Remove unneded registration of an empty net/ipv6/neighEric W. Biederman2012-04-201-27/+0
| | | | | | | | | | sysctl no longer requires explicit creation of directories. The neigh directory is always populated with at least a default entry so this should cause no user visible changes. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Move all of the network sysctls without a namespace into init_net.Eric W. Biederman2012-04-201-1/+1
| | | | | | | | | | | | | | | | This makes it clearer which sysctls are relative to your current network namespace. This makes it a little less error prone by not exposing sysctls for the initial network namespace in other namespaces. This is the same way we handle all of our other network interfaces to userspace and I can't honestly remember why we didn't do this for sysctls right from the start. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Kill register_sysctl_rotableEric W. Biederman2012-04-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | register_sysctl_rotable never caught on as an interesting way to register sysctls. My take on the situation is that what we want are sysctls that we can only see in the initial network namespace. What we have implemented with register_sysctl_rotable are sysctls that we can see in all of the network namespaces and can only change in the initial network namespace. That is a very silly way to go. Just register the network sysctls in the initial network namespace and we don't have any weird special cases to deal with. The sysctls affected are: /proc/sys/net/ipv4/ipfrag_secret_interval /proc/sys/net/ipv4/ipfrag_max_dist /proc/sys/net/ipv6/ip6frag_secret_interval /proc/sys/net/ipv6/mld_max_msf I really don't expect anyone will miss them if they can't read them in a child user namespace. CC: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modulesPaul Gortmaker2011-10-311-0/+1
| | | | | | | | | These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* net ipv6: Fix duplicate /proc/sys/net/ipv6/neigh directory entries.Eric W. Biederman2011-03-211-7/+11
| | | | | | | | | | | | | | | | | | When I was fixing issues with unregisgtering tables under /proc/sys/net/ipv6/neigh by adding a mount point it appears I missed a critical ordering issue, in the ipv6 initialization. I had not realized that ipv6_sysctl_register is called at the very end of the ipv6 initialization and in particular after we call neigh_sysctl_register from ndisc_init. "neigh" needs to be initialized in ipv6_static_sysctl_register which is the first ipv6 table to initialized, and definitely before ndisc_init. This removes the weirdness of duplicate tables while still providing a "neigh" mount point which prevents races in sysctl unregistering. This was initially reported at https://bugzilla.kernel.org/show_bug.cgi?id=31232 Reported-by: sunkan@zappa.cx Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Fix ipv6 neighbour unregister_sysctl_table warningEric W. Biederman2011-01-311-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In my testing of 2.6.37 I was occassionally getting a warning about sysctl table entries being unregistered in the wrong order. Digging in it turns out this dates back to the last great sysctl reorg done where Al Viro introduced the requirement that sysctl directories needed to be created before and destroyed after the files in them. It turns out that in that great reorg /proc/sys/net/ipv6/neigh was overlooked. So this patch fixes that oversight and makes an annoying warning message go away. >------------[ cut here ]------------ >WARNING: at kernel/sysctl.c:1992 unregister_sysctl_table+0x134/0x164() >Pid: 23951, comm: kworker/u:3 Not tainted 2.6.37-350888.2010AroraKernelBeta.fc14.x86_64 #1 >Call Trace: > [<ffffffff8103e034>] warn_slowpath_common+0x80/0x98 > [<ffffffff8103e061>] warn_slowpath_null+0x15/0x17 > [<ffffffff810452f8>] unregister_sysctl_table+0x134/0x164 > [<ffffffff810e7834>] ? kfree+0xc4/0xd1 > [<ffffffff813439b2>] neigh_sysctl_unregister+0x22/0x3a > [<ffffffffa02cd14e>] addrconf_ifdown+0x33f/0x37b [ipv6] > [<ffffffff81331ec2>] ? skb_dequeue+0x5f/0x6b > [<ffffffffa02ce4a5>] addrconf_notify+0x69b/0x75c [ipv6] > [<ffffffffa02eb953>] ? ip6mr_device_event+0x98/0xa9 [ipv6] > [<ffffffff813d2413>] notifier_call_chain+0x32/0x5e > [<ffffffff8105bdea>] raw_notifier_call_chain+0xf/0x11 > [<ffffffff8133cdac>] call_netdevice_notifiers+0x45/0x4a > [<ffffffff8133d2b0>] rollback_registered_many+0x118/0x201 > [<ffffffff8133d3af>] unregister_netdevice_many+0x16/0x6d > [<ffffffff8133d571>] default_device_exit_batch+0xa4/0xb8 > [<ffffffff81337c42>] ? cleanup_net+0x0/0x194 > [<ffffffff81337a2a>] ops_exit_list+0x4e/0x56 > [<ffffffff81337d36>] cleanup_net+0xf4/0x194 > [<ffffffff81053318>] process_one_work+0x187/0x280 > [<ffffffff8105441b>] worker_thread+0xff/0x19f > [<ffffffff8105431c>] ? worker_thread+0x0/0x19f > [<ffffffff8105776d>] kthread+0x7d/0x85 > [<ffffffff81003824>] kernel_thread_helper+0x4/0x10 > [<ffffffff810576f0>] ? kthread+0x0/0x85 > [<ffffffff81003820>] ? kernel_thread_helper+0x0/0x10 >---[ end trace 8a7e9310b35e9486 ]--- Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* net: spread __net_init, __net_exitAlexey Dobriyan2010-01-171-2/+2
| | | | | | | | | | | __net_init/__net_exit are apparently not going away, so use them to full extent. In some cases __net_init was removed, because it was called from __net_exit code. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sysctl net: Remove unused binary sysctl codeEric W. Biederman2009-11-121-8/+4
| | | | | | | | | | | | | | | | Now that sys_sysctl is a compatiblity wrapper around /proc/sys all sysctl strategy routines, and all ctl_name and strategy entries in the sysctl tables are unused, and can be revmoed. In addition neigh_sysctl_register has been modified to no longer take a strategy argument and it's callers have been modified not to pass one. Cc: "David Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
* inet6: functions shadow global variableGerrit Renker2009-08-021-2/+2
| | | | | | | | | | | This renames away a variable clash: * ipv6_table[] is declared as a static global table; * ipv6_sysctl_net_init() uses ipv6_table to refer/destroy dynamic memory; * ipv6_sysctl_net_exit() also uses ipv6_table for the same purpose; * both the two last functions call kfree() on ipv6_table. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* remove lots of double-semicolonsFernando Carrijo2009-01-081-1/+1
| | | | | | | | | | | | | Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: Theodore Ts'o <tytso@mit.edu> Acked-by: Mark Fasheh <mfasheh@suse.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* net: '&' reduxAlexey Dobriyan2008-11-031-2/+2
| | | | | | | | | | | | | I want to compile out proc_* and sysctl_* handlers totally and stub them to NULL depending on config options, however usage of & will prevent this, since taking adress of NULL pointer will break compilation. So, drop & in front of every ->proc_handler and every ->strategy handler, it was never needed in fact. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: sysctl fixesAl Viro2008-08-251-1/+1
| | | | | | | | Braino: net.ipv6 in ipv6 skeleton has no business in rotable class Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* missing bits of net-namespace / sysctlAl Viro2008-07-271-0/+16
| | | | | | | | | | | | | | | | | Piss-poor sysctl registration API strikes again, film at 11... What we really need is _pathname_ required to be present in already registered table, so that kernel could warn about bad order. That's the next target for sysctl stuff (and generally saner and more explicit order of initialization of ipv[46] internals wouldn't hurt either). For the time being, here are full fixups required by ..._rotable() stuff; we make per-net sysctl sets descendents of "ro" one and make sure that sufficient skeleton is there before we start registering per-net sysctls. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ipv6: Register some net/ipv6/ core sysctls at read-only root.Pavel Emelyanov2008-05-191-7/+22
| | | | | | | | There are some sysctls left to be switched to read-only, but they are all in ipv6, so complete with them. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6] SYSCTL: complete initialization for sysctl table in subsystem code.YOSHIFUJI Hideaki2008-03-041-14/+1
| | | | | | | | | Move initialization bits for subsystem sysctl tables to appropriate functions. - route - icmp Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
* [IPV6] SYSCTL: Fix possible memory leakage in error path.YOSHIFUJI Hideaki2008-02-271-3/+0
| | | | | | | In error path, we do need to free memory just allocated. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETNS][FRAGS]: Move ctl tables around.Pavel Emelyanov2008-01-281-39/+1
| | | | | | | | | | | | | | | | This is a preparation for sysctl netns-ization. Move the ctl tables to the files, where the tuning variables reside. Plus make the helpers to register the tables. This will simplify the later patches and will keep similar things closer to each other. ipv4, ipv6 and conntrack_reasm are patched differently, but the result is all the tables are in appropriate files. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Sparse: Declare non-static ipv6_{route,icmp,frag}_sysctl_init() in ↵YOSHIFUJI Hideaki2008-01-281-3/+0
| | | | | | | | | | | header. Fix the following sparse warnings: | net/ipv6/route.c:2491:18: warning: symbol 'ipv6_route_sysctl_init' was not declared. Should it be static? | net/ipv6/icmp.c:922:18: warning: symbol 'ipv6_icmp_sysctl_init' was not declared. Should it be static? | net/ipv6/reassembly.c:628:6: warning: symbol 'ipv6_frag_sysctl_init' was not declared. Should it be static? Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
* [NETNS][IPV6]: Make icmpv6_time sysctl per namespace.Daniel Lezcano2008-01-281-0/+1
| | | | | | | | | | | This patch moves the icmpv6_time sysctl to the network namespace structure. Because the ipv6 protocol is not yet per namespace, the variable is accessed relatively to the initial network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETNS][IPV6]: Make sysctls route per namespace.Daniel Lezcano2008-01-281-0/+11
| | | | | | | | | | | | All the sysctl concerning the routes are moved to the network namespace structure. A helper function is called to initialize the variables. Because the ipv6 protocol is not yet per namespace, the variables are accessed relatively from the network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETNS][IPV6]: Make mld_max_msf readonly in other namespaces.Daniel Lezcano2008-01-281-0/+6
| | | | | | | | | | | | | | The mld_max_msf protects the system with a maximum allowed multicast source filters. Making this variable per namespace can be potentially an problem if someone inside a namespace set it to a big value, that will impact the whole system including other namespaces. I don't see any benefits to have it per namespace for now, so in order to keep a directory entry in a newly created namespace, I make it read-only when we are not in the initial network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETNS][IPV6]: Make ip6_frags per namespace.Daniel Lezcano2008-01-281-4/+8
| | | | | | | | | | | | | The ip6_frags is moved to the network namespace structure. Because there can be multiple instances of the network namespaces, and the ip6_frags is no longer a global static variable, a helper function has been added to facilitate the initialization of the variables. Until the ipv6 protocol is not per namespace, the variables are accessed relatively from the initial network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETNS][IPV6]: Make bindv6only sysctl per namespace.Daniel Lezcano2008-01-281-1/+3
| | | | | | | | | This patch moves the bindv6only sysctl to the network namespace structure. Until the ipv6 protocol is not per namespace, the sysctl variable is always from the initial network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETNS][IPV6]: Make multiple instance of sysctl tables.Daniel Lezcano2008-01-281-10/+57
| | | | | | | | | | | | | Each network namespace wants its own set of sysctl value, eg. we should not be able from a namespace to set a sysctl value for another namespace , especially for the initial network namespace. This patch duplicates the sysctl table when we register a new network namespace for ipv6. The duplicated table are postfixed with the "template" word to notify the developper the table is cloned. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETNS][IPV6]: Make the ipv6 sysctl to be a netns subsystem.Daniel Lezcano2008-01-281-4/+19
| | | | | | | | | | | | The initialization of the sysctl for the ipv6 protocol is changed to a network namespace subsystem. That means when a new network namespace is created the initialization function for the sysctl will be called. That do not change the behavior of the sysctl in case of the kernel with the network namespace disabled. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETNS][IPV6]: Make ipv6_sysctl_register to return a value.Daniel Lezcano2008-01-281-2/+7
| | | | | | | | | This patch makes the function ipv6_sysctl_register to return a value. The af_inet6 init function is now able to handle an error and catch it from the initialization of the sysctl. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: Switch to using ctl_paths in nf_queue and conntrack modulesPavel Emelyanov2008-01-281-2/+4
| | | | | | | | | | | | | | | This includes the most simple cases for netfilter. The first part is tne queue modules for ipv4 and ipv6, on which the net/ipv4/ and net/ipv6/ paths are reused from the appropriate ipv4 and ipv6 code. The conntrack module is also patched, but this hunk is very small and simple. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Use sysctl paths to register ipv6 sysctl tablesPavel Emelyanov2008-01-281-20/+6
| | | | | | | | | | | I have already done this for core, ipv4 and tr tables, so repeat this for the ipv6 ones. This makes the ipv6.ko smaller and creates the ground needed for net namespaces support in ipv6.ko ssctls. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Make the ipv6/sysctl_net_ipv6.c compilation cleanerPavel Emelyanov2008-01-281-7/+0
| | | | | | | | | Since this file is entirely enclosed with the #ifdef CONFIG_SYSCTL/#endif pair, it's OK to move this CONFIG_ into a Makefile. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [INET]: Collect common frag sysctl variables togetherPavel Emelyanov2007-10-151-4/+5
| | | | | | | | | | | | | | | | | Some sysctl variables are used to tune the frag queues management and it will be useful to work with them in a common way in the future, so move them into one structure, moreover they are the same for all the frag management codes. I don't place them in the existing inet_frags object, introduced in the previous patch for two reasons: 1. to keep them in the __read_mostly section; 2. not to export the whole inet_frags objects outside. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] sysctl: remove insert_at_head from register_sysctlEric W. Biederman2007-02-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [NET] IPV6: Fix whitespace errors.YOSHIFUJI Hideaki2007-02-101-2/+2
| | | | | Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud