summaryrefslogtreecommitdiffstats
path: root/include/linux
Commit message (Collapse)AuthorAgeFilesLines
* mtd: nand: add support for BBT without OOBSebastian Andrzej Siewior2010-10-252-2/+11
| | | | | | | | | | | | | | | | | | The first (sixt) byte in the OOB area contains vendor's bad block information. During identification of the NAND chip this information is collected by scanning the complete chip. The option NAND_USE_FLASH_BBT is used to store this information in a sector so we don't have to scan the complete flash. Unfortunately the code stores a marker in order to recognize the BBT in the OOB area. This will fail if the OOB area is completely used for ECC. This patch introduces the option NAND_USE_FLASH_BBT_NO_OOB which has to be used with NAND_USE_FLASH_BBT. It will then store BBT on flash without touching the OOB area. The BBT format on flash remains same except the first page starts with the recognition pattern followed by the version byte. This change was tested in nandsim and it looks good so far :) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: add init_size hook for NAND driverHuang Shijie2010-10-251-0/+6
| | | | | | | | | | | | | | | Not all the NAND devices have all the information in additional id bytes. So add a hook in the nand_chip{} is a good method to calculate the right value of oobsize, erasesize and so on. Without the hook,you will get the wrong value, and you have to hack in the ->scan_bbt() to change the wrong value which make the code mess. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: prepare partition add and del functions for ioctl requestsRoman Tereshonkov2010-10-251-0/+5
| | | | | | | | | | | | | mtd_is_master, mtd_add_partition and mtd_del_partition functions are added to give the possibility of partition manipulation by ioctl request. The old partition add function is modified to fit the dynamic allocation. Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: generic FSMC NAND MTD driverLinus Walleij2010-10-251-0/+181
| | | | | | | | | | | | | This is the same driver submitted by ST Micros SPEAr team but generalized and tested on the ST-Ericsson U300. It probably easily works on the NHK8815 too. Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: add support for reading ONFI parameters from NAND deviceFlorian Fainelli2010-10-241-0/+68
| | | | | | | | | | | | | | This patch adds support for reading NAND device ONFI parameters and use the ONFI informations to define its geometry. In case the device supports ONFI, the onfi_version field in struct nand_chip contains the version (BCD) and the onfi_params structure can be used by drivers to set up timings and such. We currently only support ONFI 1.0 parameters. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Matthieu Castet <matthieu.castet@parrot.com> Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: add NAND_CMD_PARAM (0xec) definitionFlorian Fainelli2010-10-241-0/+1
| | | | | | | This command is used to read the device ONFI parameters page. Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: Increase NAND_MAX_OOBSIZEBrian Norris2010-10-241-2/+2
| | | | | | | | | | | | An increase in NAND_MAX_OOBSIZE and NAND_MAX_PAGESIZE is necessary in order to support many new chips. Among those: Toshiba TC58TxG4S2FBAxx 8KB page, 576B OOB Micron MT29F64G08CBAAA 8KB page, 448B OOB Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: edit comments on deprecation of ioctl ECCGETLAYOUTBrian Norris2010-10-241-4/+4
| | | | | | | | | | | | | | | | | There were some improvements and additions necessary in the comments explaining of the expansion of nand_ecclayout, the introduction of nand_ecclayout_user, and the deprecation of the ioctl ECCGETLAYOUT. Also, I found a better placement for the macro MTD_MAX_ECCPOS_ENTRIES; next to the definition of MTD_MAX_OOBFREE_ENTRIES in mtd-abi.h. The macro is really only important for the ioctl code (found in drivers/mtd/mtdchar.c) but since there are small edits being made to the user-space header, I figured this is a better location. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: expand nand_ecc_layout, deprecate ioctl ECCGETLAYOUTBrian Norris2010-10-242-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | struct nand_ecclayout is too small for many new chips; OOB regions can be as large as 448 bytes and may increase more in the future. Thus, copying that struct to user-space with the ECCGETLAYOUT ioctl is not a good idea; the ioctl would have to be updated every time there's a change to the current largest size. Instead, the old nand_ecclayout is renamed to nand_ecclayout_user and a new struct nand_ecclayout is created that can accomodate larger sizes and expand without affecting the user-space. struct nand_ecclayout can still be used in board drivers without modification -- at least for now. A new function is provided to convert from the new to the old in order to allow the deprecated ioctl to continue to work with truncated data. Perhaps the ioctl, the conversion process, and the struct nand_ecclayout_user can be removed altogether in the future. Note: There are comments in nand/davinci_nand.c::nand_davinci_probe() regarding this issue; this driver (and maybe others) can be updated to account for extra space. All kernel drivers can use the expanded nand_ecclayout as a drop-in replacement and ignore its benefits. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: inftl.h: fix spacing errorsBrian Norris2010-10-241-7/+7
| | | | | | | | Replaced some spaces with tabs to fit CodingStyle guidelines Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2010-09-282-3/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits) tcp: Fix >4GB writes on 64-bit. net/9p: Mount only matching virtio channels de2104x: fix ethtool tproxy: check for transparent flag in ip_route_newports ipv6: add IPv6 to neighbour table overflow warning tcp: fix TSO FACK loss marking in tcp_mark_head_lost 3c59x: fix regression from patch "Add ethtool WOL support" ipv6: add a missing unregister_pernet_subsys call s390: use free_netdev(netdev) instead of kfree() sgiseeq: use free_netdev(netdev) instead of kfree() rionet: use free_netdev(netdev) instead of kfree() ibm_newemac: use free_netdev(netdev) instead of kfree() smsc911x: Add MODULE_ALIAS() net: reset skb queue mapping when rx'ing over tunnel br2684: fix scheduling while atomic de2104x: fix TP link detection de2104x: fix power management de2104x: disable autonegotiation on broken hardware net: fix a lockdep splat e1000e: 82579 do not gate auto config of PHY by hardware during nominal use ...
| * tcp: Fix >4GB writes on 64-bit.David S. Miller2010-09-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes kernel bugzilla #16603 tcp_sendmsg() truncates iov_len to an 'int' which a 4GB write to write zero bytes, for example. There is also the problem higher up of how verify_iovec() works. It wants to prevent the total length from looking like an error return value. However it does this using 'int', but syscalls return 'long' (and thus signed 64-bit on 64-bit machines). So it could trigger false-positives on 64-bit as written. So fix it to use 'long'. Reported-by: Olaf Bonorden <bono@onlinehome.de> Reported-by: Daniel Büse <dbuese@gmx.de> Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: Move "struct net" declaration inside the __KERNEL__ macro guardOllie Wild2010-09-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | This patch reduces namespace pollution by moving the "struct net" declaration out of the userspace-facing portion of linux/netlink.h. It has no impact on the kernel. (This came up because we have several C++ applications which use "net" as a namespace name.) Signed-off-by: Ollie Wild <aaw@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds2010-09-271-0/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/amd-iommu: Fix rounding-bug in __unmap_single x86/amd-iommu: Work around S3 BIOS bug x86/amd-iommu: Set iommu configuration flags in enable-loop x86, setup: Fix earlyprintk=serial,0x3f8,115200 x86, setup: Fix earlyprintk=serial,ttyS0,115200
| * \ Merge branch 'amd-iommu/2.6.36' of ↵Ingo Molnar2010-09-241-0/+3
| |\ \ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into x86/urgent
| | * | x86/amd-iommu: Work around S3 BIOS bugJoerg Roedel2010-09-231-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a workaround for an IOMMU BIOS problem to the AMD IOMMU driver. The result of the bug is that the IOMMU does not execute commands anymore when the system comes out of the S3 state resulting in system failure. The bug in the BIOS is that is does not restore certain hardware specific registers correctly. This workaround reads out the contents of these registers at boot time and restores them on resume from S3. The workaround is limited to the specific IOMMU chipset where this problem occurs. Cc: stable@kernel.org Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
* | | | arm: fix "arm: fix pci_set_consistent_dma_mask for dmabounce devices"FUJITA Tomonori2010-09-221-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes the regression caused by the commit 6fee48cd330c68 ("dma-mapping: arm: use generic pci_set_dma_mask and pci_set_consistent_dma_mask"). ARM needs to clip the dma coherent mask for dmabounce devices. This restores the old trick. Note that strictly speaking, the DMA API doesn't allow architectures to do such but I'm not sure it's worth adding the new API to set the dma mask that allows architectures to clip it. Reported-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | fs: {lock,unlock}_flocks() stubs to prepare for BKL removalSage Weil2010-09-211-0/+4
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The lock structs are currently protected by the BKL, but are accessed by code in fs/locks.c and misc file system and DLM code. These stubs will allow all users to switch to the new interface before the implementation is changed to a spinlock. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2010-09-191-4/+4
|\ \ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) dca: disable dca on IOAT ver.3.0 multiple-IOH platforms netpoll: Disable IRQ around RCU dereference in netpoll_rx sctp: Do not reset the packet during sctp_packet_config(). net/llc: storing negative error codes in unsigned short MAINTAINERS: move atlx discussions to netdev drivers/net/cxgb3/cxgb3_main.c: prevent reading uninitialized stack memory drivers/net/eql.c: prevent reading uninitialized stack memory drivers/net/usb/hso.c: prevent reading uninitialized memory xfrm: dont assume rcu_read_lock in xfrm_output_one() r8169: Handle rxfifo errors on 8168 chips 3c59x: Remove atomic context inside vortex_{set|get}_wol tcp: Prevent overzealous packetization by SWS logic. net: RPS needs to depend upon USE_GENERIC_SMP_HELPERS phylib: fix PAL state machine restart on resume net: use rcu_barrier() in rollback_registered_many bonding: correctly process non-linear skbs ipv4: enable getsockopt() for IP_NODEFRAG ipv4: force_igmp_version ignored when a IGMPv3 query received ppp: potential NULL dereference in ppp_mp_explode() net/llc: make opt unsigned in llc_ui_setsockopt() ...
| * | netpoll: Disable IRQ around RCU dereference in netpoll_rxHerbert Xu2010-09-171-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We cannot use rcu_dereference_bh safely in netpoll_rx as we may be called with IRQs disabled. We could however simply disable IRQs as that too causes BH to be disabled and is safe in either case. Thanks to John Linville for discovering this bug and providing a patch. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge branch 'vhost-net' of ↵David S. Miller2010-09-091-1/+10
| |\ \ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
| | * | cgroups: fix API thinkoMichael S. Tsirkin2010-09-051-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cgroup_attach_task_current_cg API that have upstream is backwards: we really need an API to attach to the cgroups from another process A to the current one. In our case (vhost), a priveledged user wants to attach it's task to cgroups from a less priveledged one, the API makes us run it in the other task's context, and this fails. So let's make the API generic and just pass in 'from' and 'to' tasks. Add an inline wrapper for cgroup_attach_task_current_cg to avoid breaking bisect. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Paul Menage <menage@google.com>
* | | | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds2010-09-161-0/+4
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: add documentation
| * | | | workqueue: add documentationTejun Heo2010-09-131-0/+4
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update copyright notice and add Documentation/workqueue.txt. Randy Dunlap, Dave Chinner: misc fixes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-By: Florian Mickler <florian@mickler.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Dave Chinner <david@fromorbit.com>
* | | | Merge ssh://master.kernel.org/home/hpa/tree/secLinus Torvalds2010-09-141-0/+3
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * ssh://master.kernel.org/home/hpa/tree/sec: x86-64, compat: Retruncate rax after ia32 syscall entry tracing x86-64, compat: Test %rax for the syscall number, not %eax compat: Make compat_alloc_user_space() incorporate the access_ok()
| * | | | compat: Make compat_alloc_user_space() incorporate the access_ok()H. Peter Anvin2010-09-141-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | compat_alloc_user_space() expects the caller to independently call access_ok() to verify the returned area. A missing call could introduce problems on some architectures. This patch incorporates the access_ok() check into compat_alloc_user_space() and also adds a sanity check on the length. The existing compat_alloc_user_space() implementations are renamed arch_compat_alloc_user_space() and are used as part of the implementation of the new global function. This patch assumes NULL will cause __get_user()/__put_user() to either fail or access userspace on all architectures. This should be followed by checking the return value of compat_access_user_space() for NULL in the callers, at which time the access_ok() in the callers can also be removed. Reported-by: Ben Hawkes <hawkes@sota.gen.nz> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Tony Luck <tony.luck@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <jejb@parisc-linux.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: <stable@kernel.org>
* | | | | Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds2010-09-141-1/+1
|\ \ \ \ \ | |/ / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: SUNRPC: Fix the NFSv4 and RPCSEC_GSS Kconfig dependencies statfs() gives ESTALE error NFS: Fix a typo in nfs_sockaddr_match_ipaddr6 sunrpc: increase MAX_HASHTABLE_BITS to 14 gss:spkm3 miss returning error to caller when import security context gss:krb5 miss returning error to caller when import security context Remove incorrect do_vfs_lock message SUNRPC: cleanup state-machine ordering SUNRPC: Fix a race in rpc_info_open SUNRPC: Fix race corrupting rpc upcall Fix null dereference in call_allocate
| * | | | SUNRPC: Fix a race in rpc_info_openTrond Myklebust2010-09-121-1/+1
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a race between rpc_info_open and rpc_release_client() in that nothing stops a process from opening the file after the clnt->cl_kref goes to zero. Fix this by using atomic_inc_unless_zero()... Reported-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
* | | | Merge branch 'for_linus' of ↵Linus Torvalds2010-09-131-2/+8
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: dquot: do full inode dirty in allocating space
| * | | | dquot: do full inode dirty in allocating spaceShaohua Li2010-09-091-2/+8
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Alex Shi found a regression when doing ffsb test. The test has several threads, and each thread creates a small file, write to it and then delete it. ffsb reports about 20% regression and Alex bisected it to 43d2932d88e4. The test will call __mark_inode_dirty 3 times. without this commit, we only take inode_lock one time, while with it, we take the lock 3 times with flags ( I_DIRTY_SYNC,I_DIRTY_PAGES,I_DIRTY). Perf shows the lock contention increased too much. Below proposed patch fixes it. fs is allocating blocks, which usually means file writes and the inode will be dirtied soon. We fully dirty the inode to reduce some inode_lock contention in several calls of __mark_inode_dirty. Jan Kara: Added comment. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Alex Shi <alex.shi@intel.com> Signed-off-by: Jan Kara <jack@suse.cz>
* | | | Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2010-09-132-0/+3
|\ \ \ \ | |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'next-spi' of git://git.secretlab.ca/git/linux-2.6: spi/pl022: move probe call to subsys_initcall() powerpc/5200: mpc52xx_uart.c: Add of_node_put to avoid memory leak spi/pl022: fix APB pclk power regression on U300 spi/spi_s3c64xx: Warn if PIO transfers time out spi/s3c64xx: Fix incorrect reuse of 'val' local variable. spi/s3c64xx: Fix compilation warning spi/dw_spi: clean the cs_control code spi/dw_spi: Allow interrupt sharing spi/spi_s3c64xx: Increase dead reckoning time in wait_for_xfer() spi/spi_s3c64xx: Move to subsys_initcall() spi: free children in spi_unregister_master, not siblings gpiolib: Add 'struct gpio_chip' forward declaration for !GPIOLIB case of: Fix missing includes - ll_temac spi/spi_s3c64xx: Staticise non-exported functions spi/spi_s3c64xx: Make probe more robust against missing board config
| * | | spi/dw_spi: clean the cs_control codeFeng Tang2010-09-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 052dc7c45i "spi/dw_spi: conditional transfer mode change" introduced cs_control code, which has a bug by using bit offset for spi mode to set transfer mode in control register. Also it forces devices who don't need cs_control to re-configure the control registers for each spi transfer. This patch will fix them Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * | | gpiolib: Add 'struct gpio_chip' forward declaration for !GPIOLIB caseAnton Vorontsov2010-09-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With CONFIG_GPIOLIB=n, the 'struct gpio_chip' is not declared, so the following pops up on PowerPC: cc1: warnings being treated as errors In file included from arch/powerpc/platforms/52xx/mpc52xx_common.c:19: include/linux/of_gpio.h:74: warning: 'struct gpio_chip' declared inside parameter list include/linux/of_gpio.h:74: warning: its scope is only this definition or declaration, which is probably not what you want include/linux/of_gpio.h:75: warning: 'struct gpio_chip' declared inside parameter list make[2]: *** [arch/powerpc/platforms/52xx/mpc52xx_common.o] Error 1 This patch fixes the issue by providing the proper forward declaration. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | | | Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2010-09-101-0/+1
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: Range check cpu in blk_cpu_to_group scatterlist: prevent invalid free when alloc fails writeback: Fix lost wake-up shutting down writeback thread writeback: do not lose wakeup events when forking bdi threads cciss: fix reporting of max queue depth since init block: switch s390 tape_block and mg_disk to elevator_change() block: add function call to switch the IO scheduler from a driver fs/bio-integrity.c: return -ENOMEM on kmalloc failure bio-integrity.c: remove dependency on __GFP_NOFAIL BLOCK: fix bio.bi_rw handling block: put dev->kobj in blk_register_queue fail path cciss: handle allocation failure cfq-iosched: Documentation help for new tunables cfq-iosched: blktrace print per slice sector stats cfq-iosched: Implement tunable group_idle cfq-iosched: Do group share accounting in IOPS when slice_idle=0 cfq-iosched: Do not idle if slice_idle=0 cciss: disable doorbell reset on reset_devices blkio: Fix return code for mkdir calls
| * | | | block: add function call to switch the IO scheduler from a driverJens Axboe2010-08-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently drivers must do an elevator_exit() + elevator_init() to switch IO schedulers. There are a few problems with this: - Since commit 1abec4fdbb142e3ccb6ce99832fae42129134a96, elevator_init() requires a zeroed out q->elevator pointer. The two existing in-kernel users don't do that. - It will only work at initialization time, since using the above two-staged construct does not properly quisce the queue. So add elevator_change() which takes care of this, and convert the elv_iosched_store() sysfs interface to use this helper as well. Reported-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reported-by: Kevin Vigor <kevin@vigor.nu> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | | | | Merge branch 'upstream-linus' of ↵Linus Torvalds2010-09-091-1/+3
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata-sff: Reenable Port Multiplier after libata-sff remodeling. libata: skip EH autopsy and recovery during suspend ahci: AHCI and RAID mode SATA patch for Intel Patsburg DeviceIDs ata_piix: IDE Mode SATA patch for Intel Patsburg DeviceIDs libata,pata_via: revert ata_wait_idle() removal from ata_sff/via_tf_load() ahci: fix hang on failed softreset pata_artop: Fix device ID parity check
| * | | | | libata-sff: Reenable Port Multiplier after libata-sff remodeling.Gwendal Grignou2010-09-091-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Keep track of the link on the which the current request is in progress. It allows support of links behind port multiplier. Not all libata-sff is PMP compliant. Code for native BMDMA controller does not take in accound PMP. Tested on Marvell 7042 and Sil7526. Signed-off-by: Gwendal Grignou <gwendal@google.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | | | libata: skip EH autopsy and recovery during suspendTejun Heo2010-09-091-0/+1
| | |_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For some mysterious reason, certain hardware reacts badly to usual EH actions while the system is going for suspend. As the devices won't be needed until the system is resumed, ask EH to skip usual autopsy and recovery and proceed directly to suspend. Signed-off-by: Tejun Heo <tj@kernel.org> Tested-by: Stephan Diestelhorst <stephan.diestelhorst@amd.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | | | | mm: page allocator: calculate a better estimate of NR_FREE_PAGES when memory ↵Christoph Lameter2010-09-092-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | is low and kswapd is awake Ordinarily watermark checks are based on the vmstat NR_FREE_PAGES as it is cheaper than scanning a number of lists. To avoid synchronization overhead, counter deltas are maintained on a per-cpu basis and drained both periodically and when the delta is above a threshold. On large CPU systems, the difference between the estimated and real value of NR_FREE_PAGES can be very high. If NR_FREE_PAGES is much higher than number of real free page in buddy, the VM can allocate pages below min watermark, at worst reducing the real number of pages to zero. Even if the OOM killer kills some victim for freeing memory, it may not free memory if the exit path requires a new page resulting in livelock. This patch introduces a zone_page_state_snapshot() function (courtesy of Christoph) that takes a slightly more accurate view of an arbitrary vmstat counter. It is used to read NR_FREE_PAGES while kswapd is awake to avoid the watermark being accidentally broken. The estimate is not perfect and may result in cache line bounces but is expected to be lighter than the IPI calls necessary to continually drain the per-cpu counters while kswapd is awake. Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | swap: discard while swapping only if SWAP_FLAG_DISCARDHugh Dickins2010-09-091-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tests with recent firmware on Intel X25-M 80GB and OCZ Vertex 60GB SSDs show a shift since I last tested in December: in part because of firmware updates, in part because of the necessary move from barriers to awaiting completion at the block layer. While discard at swapon still shows as slightly beneficial on both, discarding 1MB swap cluster when allocating is now disadvanteous: adds 25% overhead on Intel, adds 230% on OCZ (YMMV). Surrender: discard as presently implemented is more hindrance than help for swap; but might prove useful on other devices, or with improvements. So continue to do the discard at swapon, but make discard while swapping conditional on a SWAP_FLAG_DISCARD to sys_swapon() (which has been using only the lower 16 bits of int flags). We can add a --discard or -d to swapon(8), and a "discard" to swap in /etc/fstab: matching the mount option for btrfs, ext4, fat, gfs2, nilfs2. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Nigel Cunningham <nigel@tuxonice.net> Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <jaxboe@fusionio.com> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | swap: revert special hibernation allocationHugh Dickins2010-09-091-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Please revert 2.6.36-rc commit d2997b1042ec150616c1963b5e5e919ffd0b0ebf "hibernation: freeze swap at hibernation". It complicated matters by adding a second swap allocation path, just for hibernation; without in any way fixing the issue that it was intended to address - page reclaim after fixing the hibernation image might free swap from a page already imaged as swapcache, letting its swap be reallocated to store a different page of the image: resulting in data corruption if the imaged page were freed as clean then swapped back in. Pages freed to si->swap_map were still in danger of being reallocated by the alternative allocation path. I guess it inadvertently fixed slow SSD swap allocation for hibernation, as reported by Nigel Cunningham: by missing out the discards that occur on the usual swap allocation path; but that was unintentional, and needs a separate fix. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ondrej Zary <linux@rainbow-software.org> Cc: Andrea Gelmini <andrea.gelmini@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Nigel Cunningham <nigel@tuxonice.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | gpio: sx150x: correct and refine reset-on-probe behaviorGregory Bean2010-09-091-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace the arbitrary software-reset call from the device-probe method, because: - It is defective. To work correctly, it should be two byte writes, not a single word write. As it stands, it does nothing. - Some devices with sx150x expanders installed have their NRESET pins ganged on the same line, so resetting one causes the others to reset - not a nice thing to do arbitrarily! - The probe, usually taking place at boot, implies a recent hard-reset, so a software reset at this point is just a waste of energy anyway. Therefore, make it optional, defaulting to off, as this will match the common case of probing at powerup and also matches the current broken no-op behavior. Signed-off-by: Gregory Bean <gbean@codeaurora.org> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | mm: fix swapin race conditionAndrea Arcangeli2010-09-091-11/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pte_same check is reliable only if the swap entry remains pinned (by the page lock on swapcache). We've also to ensure the swapcache isn't removed before we take the lock as try_to_free_swap won't care about the page pin. One of the possible impacts of this patch is that a KSM-shared page can point to the anon_vma of another process, which could exit before the page is freed. This can leave a page with a pointer to a recycled anon_vma object, or worse, a pointer to something that is no longer an anon_vma. [riel@redhat.com: changelog help] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Hugh Dickins <hughd@google.com> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | cgroups: fix API thinkoMichael S. Tsirkin2010-09-091-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add cgroup_attach_task_all() The existing cgroup_attach_task_current_cg() API is called by a thread to attach another thread to all of its cgroups; this is unsuitable for cases where a privileged task wants to attach itself to the cgroups of a less privileged one, since the call must be made from the context of the target task. This patch adds a more generic cgroup_attach_task_all() API that allows both the source task and to-be-moved task to be specified. cgroup_attach_task_current_cg() becomes a specialization of the more generic new function. [menage@google.com: rewrote changelog] [akpm@linux-foundation.org: address reviewer comments] Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Ben Blum <bblum@google.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | kfifo: add parenthesis for macro parameter referenceHuang Ying2010-09-091-29/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some macro parameter references inside typeof() operator are not enclosed with parenthesis. It should be safer to add them. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Stefani Seibold <stefani@seibold.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | mmc: avoid getting CID on SDIO-only cardsDavid Vrabel2010-09-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The introduction of support for SD combo cards breaks the initialization of all CSR SDIO chips. The GO_IDLE (CMD0) in mmc_sd_get_cid() causes CSR chips to be reset (this is non-standard behavior). When initializing an SDIO card check for a combo card by using the memory present bit in the R4 response to IO_SEND_OP_COND (CMD5). This avoids the call to mmc_sd_get_cid() on an SDIO-only card. Signed-off-by: David Vrabel <david.vrabel@csr.com> Acked-by: Michal Mirolaw <mirq-linux@rere.qmqm.pl> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | lglock: make lg_lock_global() actually lock globallyJonathan Corbet2010-09-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | lg_lock_global() currently only acquires spinlocks for online CPUs, but it's meant to lock all possible CPUs. Lglock-protected resources may be associated with removed CPUs - and, indeed, that could happen with the per-superblock open files lists. At Nick's suggestion, change for_each_online_cpu() to for_each_possible_cpu() to protect accesses to those resources. Cc: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Nick Piggin <npiggin@kernel.dk> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | mm: Move vma_stack_continue into mm.hStefan Bader2010-09-091-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So it can be used by all that need to check for that. Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | Merge branch 'semaphore-for-linus' of ↵Linus Torvalds2010-09-081-0/+3
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'semaphore-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: semaphore: Add DEFINE_SEMAPHORE
| * | | | | semaphore: Add DEFINE_SEMAPHOREThomas Gleixner2010-09-081-0/+3
| |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The full cleanup of init_MUTEX[_LOCKED] and DECLARE_MUTEX has not been done. Some of the users are real semaphores and we should name them as such instead of confusing everyone with "MUTEX". Provide the infrastructure to get finally rid of init_MUTEX[_LOCKED] and DECLARE_MUTEX. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> LKML-Reference: <20100907125054.795929962@linutronix.de>
OpenPOWER on IntegriCloud