summaryrefslogtreecommitdiffstats
path: root/fs/gfs2/aops.c
Commit message (Collapse)AuthorAgeFilesLines
* GFS2: Resolve inode eviction and ail list interaction bugSteven Whitehouse2011-07-141-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch contains a few misc fixes which resolve a recently reported issue. This patch has been a real team effort and has received a lot of testing. The first issue is that the ail lock needs to be held over a few more operations. The lock thats added into gfs2_releasepage() may possibly be a candidate for replacing with RCU at some future point, but at this stage we've gone for the obvious fix. The second issue is that gfs2_write_inode() can end up calling a glock recursively when called from gfs2_evict_inode() via the syncing code, so it needs a guard added. The third issue is that we either need to not truncate the metadata pages of inodes which have zero link count, but which we cannot deallocate due to them still being in use by other nodes, or we need to ensure that those pages have all made it through the journal and ail lists first. This patch takes the former approach, but the latter has also been tested and there is nothing to choose between them performance-wise. So again, we could revise that decision in the future. Also, the inode eviction process is now better documented. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Tested-by: Bob Peterson <rpeterso@redhat.com> Tested-by: Abhijith Das <adas@redhat.com> Reported-by: Barry J. Marson <bmarson@redhat.com> Reported-by: David Teigland <teigland@redhat.com>
* GFS2: Improve bug trap code in ->releasepage()Steven Whitehouse2011-05-031-2/+6
| | | | | | | | | | | | | If the buffer is dirty or pinned, then as well as printing a warning, we should also refuse to release the page in question. Currently this can occur if there is a race between mmap()ed writers and O_DIRECT on the same file. With the addition of ->launder_page() in the future, we should be able to close this gap. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: write_end error path fails to unlock transaction lockBob Peterson2011-04-181-1/+1
| | | | | | | | | | | | | I did an audit of gfs2's transaction glock for bugzilla bug 658619 and ran across this: In function gfs2_write_end, in the unlikely event that gfs2_meta_inode_buffer returns an error, the code may forget to unlock the transaction lock because the "failed" label appears after the call to function gfs2_trans_end. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* Merge branch 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2011-03-241-3/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits) Documentation/iostats.txt: bit-size reference etc. cfq-iosched: removing unnecessary think time checking cfq-iosched: Don't clear queue stats when preempt. blk-throttle: Reset group slice when limits are changed blk-cgroup: Only give unaccounted_time under debug cfq-iosched: Don't set active queue in preempt block: fix non-atomic access to genhd inflight structures block: attempt to merge with existing requests on plug flush block: NULL dereference on error path in __blkdev_get() cfq-iosched: Don't update group weights when on service tree fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away block: Require subsystems to explicitly allocate bio_set integrity mempool jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging fs: make fsync_buffers_list() plug mm: make generic_writepages() use plugging blk-cgroup: Add unaccounted time to timeslice_used. block: fixup plugging stubs for !CONFIG_BLOCK block: remove obsolete comments for blkdev_issue_zeroout. blktrace: Use rq->cmd_flags directly in blk_add_trace_rq. ... Fix up conflicts in fs/{aio.c,super.c}
| * block: remove per-queue pluggingJens Axboe2011-03-101-3/+0
| | | | | | | | | | | | | | | | Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | GFS2: Adding missing unlock_page()Maxim2011-03-141-0/+1
|/ | | | | | | | | | | | | | | | | | gfs2_write_begin() calls grab_cache_page_write_begin() that returns *locked* page. Correspondent error-handling path lacks for unlock_page() call: > out: > if (error == 0) > return 0; > > page_cache_release(page); The whole system hangs if gfs2_unstuff_dinode() called from gfs2_write_begin() failed for some reason. Reported-by: Maxim <maxim.patlasov@gmail.com> Signed-off-by: Maxim <maxim.patlasov@gmail.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* fs: kill block_prepare_writeChristoph Hellwig2010-10-251-2/+1
| | | | | | | | | __block_write_begin and block_prepare_write are identical except for slightly different calling conventions. Convert all callers to the __block_write_begin calling conventions and drop block_prepare_write. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* GFS2: Fix compiler warning from previous patchSteven Whitehouse2010-09-281-1/+1
| | | | | | | This shouldn't really be required, but gcc can't tell that "al" is only accessed when initialised. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: reserve more blocks for transactionsBenjamin Marzinski2010-09-281-0/+2
| | | | | | | | | | | | | Some of the functions in GFS2 were not reserving space in the transaction for the resource group header and the resource groups bitblocks that get added when you do allocation. GFS2 now makes sure to reserve space for the resource group header and either all the bitblocks in the resource group, or one for each block that it may allocate, whichever is smaller using the new gfs2_rg_blocks() inline function. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: fallocate supportBenjamin Marzinski2010-09-201-2/+2
| | | | | | | | | | | | | | This patch adds support for fallocate to gfs2. Since the gfs2 does not support uninitialized data blocks, it must write out zeros to all the blocks. However, since it does not need to lock any pages to read from, gfs2 can write out the zero blocks much more efficiently. On a moderately full filesystem, fallocate works around 5 times faster on average. The fallocate call also allows gfs2 to add blocks to the file without changing the filesize, which will make it possible for gfs2 to preallocate space for the rindex file, so that gfs2 can grow a completely full filesystem. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Remove i_disksizeSteven Whitehouse2010-09-201-5/+1
| | | | | | | | | With the update of the truncate code, ip->i_disksize and inode->i_size are merely copies of each other. This means we can remove ip->i_disksize and use inode->i_size exclusively reducing the size of a GFS2 inode by 8 bytes. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: New truncate sequenceSteven Whitehouse2010-09-201-6/+4
| | | | | | | | | | | This updates GFS2's truncate code to use the new truncate sequence correctly. This is a stepping stone to being able to remove ip->i_disksize in favour of using i_size everywhere now that the two sizes are always identical. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Christoph Hellwig <hch@lst.de>
* Merge branch 'for-linus' of ↵Linus Torvalds2010-08-101-5/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits) no need for list_for_each_entry_safe()/resetting with superblock list Fix sget() race with failing mount vfs: don't hold s_umount over close_bdev_exclusive() call sysv: do not mark superblock dirty on remount sysv: do not mark superblock dirty on mount btrfs: remove junk sb_dirt change BFS: clean up the superblock usage AFFS: wait for sb synchronization when needed AFFS: clean up dirty flag usage cifs: truncate fallout mbcache: fix shrinker function return value mbcache: Remove unused features add f_flags to struct statfs(64) pass a struct path to vfs_statfs update VFS documentation for method changes. All filesystems that need invalidate_inode_buffers() are doing that explicitly convert remaining ->clear_inode() to ->evict_inode() Make ->drop_inode() just return whether inode needs to be dropped fs/inode.c:clear_inode() is gone fs/inode.c:evict() doesn't care about delete vs. non-delete paths now ... Fix up trivial conflicts in fs/nilfs2/super.c
| * check ATTR_SIZE contraints in inode_change_okChristoph Hellwig2010-08-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure we check the truncate constraints early on in ->setattr by adding those checks to inode_change_ok. Also clean up and document inode_change_ok to make this obvious. As a fallout we don't have to call inode_newsize_ok from simple_setsize and simplify it down to a truncate_setsize which doesn't return an error. This simplifies a lot of setattr implementations and means we use truncate_setsize almost everywhere. Get rid of fat_setsize now that it's trivial and mark ext2_setsize static to make the calling convention obvious. Keep the inode_newsize_ok in vmtruncate for now as all callers need an audit for its removal anyway. Note: setattr code in ecryptfs doesn't call inode_change_ok at all and needs a deeper audit, but that is left for later. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * sort out blockdev_direct_IO variantsChristoph Hellwig2010-08-091-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Move the call to vmtruncate to get rid of accessive blocks to the callers in prepearation of the new truncate calling sequence. This was only done for DIO_LOCKING filesystems, so the __blockdev_direct_IO_newtrunc variant was not needed anyway. Get rid of blockdev_direct_IO_no_locking and its _newtrunc variant while at it as just opencoding the two additional paramters is shorted than the name suffix. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | GFS2: Simplify gfs2_write_alloc_requiredBob Peterson2010-07-291-3/+1
| | | | | | | | | | | | | | | | | | | | | | Function gfs2_write_alloc_required always returned zero as its return code. Therefore, it doesn't need to return a return code at all. Given that, we can use the return value to return whether or not the dinode needs block allocations rather than passing that value in, which in turn simplifies a bunch of error checking. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* | GFS2: Use nobh_writepageSteven Whitehouse2010-07-291-4/+1
|/ | | | | | | Use nobh_writepage rather than calling mpage_writepage directly. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Christoph Hellwig <hch@lst.de>
* kill spurious reference to vmtruncatenpiggin@suse.de2010-05-271-1/+7
| | | | | | | | | | Lots of filesystems calls vmtruncate despite not implementing the old ->truncate method. Switch them to use simple_setsize and add some comments about the truncate code where it seems fitting. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* GFS2: Clean up stuffed file copyingSteven Whitehouse2010-03-291-3/+5
| | | | | | | | | | | | | If the inode size was corrupt for stuffed files, it was possible for the copying of data to overrun the block and/or page. This patch checks for that condition so that this is no longer possible. This is also preparation for the new truncate sequence patch which requires the ability to have stuffed files with larger sizes than (disk block size - sizeof(on disk inode)) with the restriction that only the initial part of the file may be non-zero. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Metadata address space clean upSteven Whitehouse2010-03-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the start of GFS2, an "extra" inode has been used to store the metadata belonging to each inode. The only reason for using this inode was to have an extra address space, the other fields were unused. This means that the memory usage was rather inefficient. The reason for keeping each inode's metadata in a separate address space is that when glocks are requested on remote nodes, we need to be able to efficiently locate the data and metadata which relating to that glock (inode) in order to sync or sync and invalidate it (depending on the remotely requested lock mode). This patch adds a new type of glock, which has in addition to its normal fields, has an address space. This applies to all inode and rgrp glocks (but to no other glock types which remain as before). As a result, we no longer need to have the second inode. This results in three major improvements: 1. A saving of approx 25% of memory used in caching inodes 2. A removal of the circular dependency between inodes and glocks 3. No confusion between "normal" and "metadata" inodes in super.c Although the first of these is the more immediately apparent, the second is just as important as it now enables a number of clean ups at umount time. Those will be the subject of future patches. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* writeback: remove unused nonblocking and congestion checks (gfs2)Wu Fengguang2009-12-031-12/+0
| | | | | | | | | No one is calling wb_writeback and write_cache_pages with wbc.nonblocking=1 any more. And lumpy pageout will want to do nonblocking writeback without the congestion wait. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: drop rindex glock to refresh rindex listBenjamin Marzinski2009-12-031-2/+6
| | | | | | | | | | | | When a gfs2 filesystem is grown, it needs to rebuild the rindex list to be able to use the new space. gfs2 does this when the rindex is marked not uptodate, which happens when the rindex glock is dropped. However, on a single node setup, there is never any reason to drop the rindex glock, so gfs2 never invalidates the the rindex. This patch makes gfs2 automatically drop the rindex glock after filesystem grows, so it can refresh the rindex list. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* HWPOISON: Enable .remove_error_page for migration aware file systemsAndi Kleen2009-09-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | Enable removing of corrupted pages through truncation for a bunch of file systems: ext*, xfs, gfs2, ocfs2, ntfs These should cover most server needs. I chose the set of migration aware file systems for this for now, assuming they have been especially audited. But in general it should be safe for all file systems on the data area that support read/write and truncate. Caveat: the hardware error handler does not take i_mutex for now before calling the truncate function. Is that ok? Cc: tytso@mit.edu Cc: hch@infradead.org Cc: mfasheh@suse.com Cc: aia21@cantab.net Cc: hugh.dickins@tiscali.co.uk Cc: swhiteho@redhat.com Signed-off-by: Andi Kleen <ak@linux.intel.com>
* GFS2: keep statfs info in sync on growsBenjamin Marzinski2009-07-301-0/+39
| | | | | | | | | | | | | | | | | | | GFS2 wasn't syncing its statfs info on grows. This causes a problem when you grow the filesystem on multiple nodes. GFS2 would calculate the new space based on the resource groups (which are always current), and then assume that the filesystem had grown the from the existing statfs size. If you grew the filesystem on two different nodes in a short time, the second node wouldn't see the statfs size change from the first node, and would assume that it was grown by a larger amount than it was. When all these changes were synced out, the total fileystem size would be incorrect (the first grow would be counted twice). This patch syncs makes GFS2 read in the statfs changes from disk before a grow, and write them out after the grow, while the master statfs inode is locked. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2: Clean up some file namesSteven Whitehouse2009-05-221-0/+1145
This patch renames the ops_*.c files which have no counterpart without the ops_ prefix in order to shorten the name and make it more readable. In addition, ops_address.h (which was very small) is moved into inode.h and inode.h is cleaned up by adding extern where required. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
OpenPOWER on IntegriCloud