summaryrefslogtreecommitdiffstats
path: root/drivers/usb
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] USB: ftdi_sio: custom baud rate fixIan Abbott2005-09-121-1/+1
| | | | | | | | ftdi_sio: I messed up the baud_base for custom baud rate support in 2.6.13. The attached one-liner patch fixes it. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: Usbmon setup DMA patchPete Zaitcev2005-09-121-1/+1
| | | | | | | | | | | | | | Alan Stern sent me this patch. It goes on top of the patch the adds mon_dmapeek: http://ftp.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/gregkh-04-usb/usb-usbmon-dma-areas.patch Please be warned about ordering requirements or the build may fail. Actually, mon_dmapeek is generic enough to support SETUP packets too. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] usb: fix uss720 schedule with interrupts offThomas Sailer2005-09-121-123/+270
| | | | | | | | | | | This patch fixes the long standing schedule with interrupts off problem of the uss720 driver. The problem is caused by the parport layer calling the save and restore methods within a write_lock_irqsave guarded region. The fix is to issue the control transaction requests required by save and restore asynchronously. Signed-off-by: Thomas Sailer, <sailer@ife.ee.ethz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: usb-storage: Add unusual_devs entry for Neuros Audio MP3 playerDaniel Drake2005-09-121-0/+8
| | | | | | | | | | | | | | | | | | | | | Alan Stern wrote: > If the device sometimes reports the correct values, then you should > include NEED_OVERRIDE flag to prevent messages about unnecessary > overrides showing up in the system log. Also, if bInterfaceSubclass > is correct and only bInterfaceProtocol is wrong, then the entry should > say US_SC_DEVICE instead of US_SC_SCSI. Fair points, thanks. When connected over USB2, this device reports a nonsense bInterfaceProtocol value 6 and doesn't work with usb-storage. When connected over USB1, the device reports the correct bInterfaceProtocol value 0x50 (bulk) and works with no problems. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: storage: Add unusual_dev SINGLE_LUN entriesPhil Dibowitz2005-09-121-0/+17
| | | | | | | | | | | | This patch adds entries for several USB floppies that need the US_FL_SINGLE_LUN flag. These were reported by Sebastian Kapfer <sebastian_kapfer@gmx.net> and Olaf Hering <olh@suse.de>, with rediffing and cleaning from me. Reported-by: Sebastian Kapfer <sebastian_kapfer@gmx.net> Reported-by: Olaf Hering <olh@suse.de> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB Storage: unusual_devs.h request for TranscendPete Zaitcev2005-09-121-0/+10
| | | | | | | | | | | | | | | | | The stick replies to the door lock commands with a check condition (e.g. FAIL status in a normal bulk CSW), but the subsequent REQUEST SENSE returns all-zero sense. The situation is documented in our Bugzilla, including usbmon traces. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=162559 The error is purely cosmetic, data integrity is not in danger. But I thought we might as well do it. It looks nicer that way. I discussed this with Phil and he told me to submit directly. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: storage: Fix messed-up lockingMatthew Dharm2005-09-122-14/+17
| | | | | | | | | | | | | | | | | | | This is patch as550 from Alan Stern. Apparently someone changed the SCSI core so that it no longer holds the host lock when doing a device or bus reset. usb-storage was updated at the time, but the change was done carelessly. Some of the code depends on that lock being held. This patch reintroduces the host lock where needed and tries to clarify the comments explaining why the lock is necessary. It also moves the code that clears the TIMED_OUT and ABORTING bitflags so that it executes as soon as the timed-out command has completed (and while the host lock is held). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: relax usbcore reset timingsDavid Brownell2005-09-121-4/+5
| | | | | | | | | This appears to help some folk, please merge. This patch relaxes reset timings. There are some reports that it helps make enumeration work better on some high speed devices. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: PL2303: CA-42 Phone cableRobert Spanton2005-09-122-0/+5
| | | | | | | | | This patch adds the product ID and vendor ID for a Nokia CA-42 USB cable to the list of devices handled by the pl2303 driver. The patch is against 2.6.13. Signed-off-by: Robert Spanton <rds204@zepler.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: OHCI, pxa27x OHCI port power tweaksDavid Brownell2005-09-121-38/+7
| | | | | | | | | | | | | | Now that it's in use on other boards, a bug in the original code needs fixing. There is no need for the PXA27x OHCI to set usb power during init, since the hub driver in usbcore handles that. Those platform-specific power control functions are also incorrect, and should therefore be removed. Add a check to clear the OTG pin hold bit until such times OTG is properly implemented. Signed-Off-By: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: OHCI relies less on NDP registerDavid Brownell2005-09-125-20/+25
| | | | | | | | | | | | | | Some OHCI implementations have differences in the way the NDP register (in roothub_a) reports the number of ports present. This patch allows the platform specific code to optionally supply the number of ports. The driver just reads the value at init (if not supplied) instead of reading it every time its needed (except for an AMD756 bug workaround). It also sets the value correctly for the ARM pxa27x architecture. Signed-Off-By: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: OHCI irq tweakDavid Brownell2005-09-121-0/+1
| | | | | | | | | | | | | | Evidently there are some boards which care a lot about this, but as a rule it's been hard to notice. OHCI_INTR_RD wasn't always cleared in the ohci irq handler. On some systems this means certain remote wakeup scenarios could seem to hang (in an interrupt storm, RD never clearing). From: "William Morrow" <William.Morrow@amd.com> Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB gadgetfs: fixes an error on writing to endpoint filePavol Kurina2005-09-121-0/+1
| | | | | | | | | | | this patch fixes an "Invalid argument" error returned by a write to an endpoint-file after reopening it in the gadgetfs module in the kernel 2.6.12. This was testet only with dummy_hcd module! Signed-off-by: Pavol Kurina <kurina@gmx.net> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* [PATCH] drivers/usb: fix-up schedule_timeout() usageNishanth Aravamudan2005-09-125-12/+12
| | | | | | | | Description: Use schedule_timeout_{,un}interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: get rid of minor log spammingDavid Brownell2005-09-121-1/+1
| | | | | | | | | | Routine cases like handoff-to-companion shouldn't trigger diagnostics. This gets rid of some recently added log spamming. It's routine for hub_port_wait_reset() to return -ENOTCONN to indicate handoff from highspeed hubs to companions, so an error message is incorrect. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: EHCI workaround for NForce and mem > 2GBDavid Brownell2005-09-121-0/+17
| | | | | | | | | NVidia reports (via Mark Overby) that some of their EHCI controllers don't like certain data structure addresses beyond the 2GB mark. He provided an earlier version of this patch. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: EHCI port tweaksDavid Brownell2005-09-123-13/+23
| | | | | | | | | | | | | | | | | | | | | | | | | One change may improve some S1 or S3 resume cases, and the other seems mostly to explain some strange state "lsusb" would show. Two fixes: - On resume, don't think about resuming any unpowered port, or resetting any port with OWNER set to the OHCI/UHCI companion. This will make some S1 and S3 resume scenarios work better. - PORT_CSC was not being cleared correctly in ehci_hub_status_data. This was visible at least through current versions of "lsusb", and might have caused some other hub related strangeness. The fix addresses all three write-to-clear bits, using the same approach that UHCI happens to use: a mask of bits that are cleared in most writes to that port status register. Original patch seems to have been from from William.Morrow@amd.com and this version (from David) finishes the write-to-clear changes. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: CP2101 New Device IDsCraig Shelley2005-09-121-1/+4
| | | | | | | Three new device IDs for CP2101 USB to UART Bridge Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB UHCI: remove the FSBR kernel timerAlan Stern2005-09-124-54/+32
| | | | | | | | | This patch (as558) removes from the UHCI driver a kernel timer used for checking Full Speed Bandwidth Reclamation (FSBR). The checking can be done during normal root-hub polling; it doesn't need a separate timer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] usbcore: small changes to HCD glue layerAlan Stern2005-09-121-2/+1
| | | | | | | | | | This patch (as549) introduces two small changes in the HCD glue layer. The first simply removes a redundant test. The second allows root-hub polling to continue for a single iteration after a host controller dies; this is needed for the patch that follows. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: add apple usb touchpad driverStelian Pop2005-09-123-0/+490
| | | | | | | | | | | | | | | | | | | | | | This is a driver for the USB touchpad which can be found on post-February 2005 Apple PowerBooks. This driver is derived from Johannes Berg's appletrackpad driver [1], but it has been improved in some areas: * appletouch is a full kernel driver, no userspace program is necessary * appletouch can be interfaced with the synaptics X11 driver[2], in order to have touchpad acceleration, scrolling, two/three finger tap, etc. This driver has been tested by the readers of the 'debian-powerpc' mailing list for a few weeks now and I believe it is now ready for inclusion into the mainline kernel. Credits go to Johannes Berg for reverse-engineering the touchpad protocol, Frank Arnold for further improvements, and Alex Harper for some additional information about the inner workings of the touchpad sensors. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: sisusb[vga] updateThomas Winischhofer2005-09-128-55/+4231
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | here is a new and extended version of the sisusbvga (previously: sisusb) driver. The patch is against 2.6.13 and updates the driver to version 0.0.8. Additions include complete VGA/EGA text console support and a build-in display mode infrastructure for userland applications that don't know about the graphics internals. Fixes include some BE/LE issues and a get/put_dev bug in the previous version. Other changes include a change of the module name from "sisusb" to "sisusbvga". The previous one was too generic IMHO. Please note that the patch also affects the Makefile in drivers/video/console as the driver requires the VGA 8x16 font in case the text console part is selected. Heavily tested, as usual. Please apply. One thing though: I already prepared for removal of the "mode" field and the changed "name" field in the usb_class_driver structure. This will perhaps need some refinement depending on whether you/Linus merge the respective core changes before or after 2.6.14. Signed-off-by: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Revert "[PATCH] USB: Prevent hid-core claiming Apple Bluetooth device on new ↵Greg KH2005-09-121-2/+0
| | | | | | | | G4 powerbooks" This reverts 22af8878d2d641c6b15fe39fe4de3c05b2c477f0 commit. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/dtor/input Linus Torvalds2005-09-105-32/+154
|\
| * Manual merge with LinusDmitry Torokhov2005-09-0985-3950/+7085
| |\
| * | Input: HIDDEV - make HIDIOCSREPORT wait IO completionStefan Nickl2005-09-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When trying to make the hiddev driver issue several Set_Report control transfers to a custom device with 2.6.13-rc6, only the first transfer in a row is carried out, while others immediately following it are silently dropped. This happens where hid_submit_report() (in hid-core.c) tests for HID_CTRL_RUNNING, which seems to be still set because the first transfer is not finished yet. As a workaround, inserting a delay between the two calls to ioctl(HIDIOCSREPORT) in userspace "solves" the problem. The straightforward fix is to add a call to hid_wait_io() to the implementation of HIDIOCSREPORT (in hiddev.c), just like for HIDIOCGREPORT. Works fine for me. Apparently, this issue has some history: http://marc.theaimsgroup.com/?l=linux-usb-users&m=111100670105558&w=2 Signed-off-by: Stefan Nickl <Stefan.Nickl@kontron.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | Input: HID - add Wireless Security Lock to HID blacklistBrian Schau2005-09-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The device is a Wireless Security Lock (WSL). The device identifies itself as a Cypress Ultra Mouse. It is, however, not a mouse at all and as such, shouldn't be handled as one. Signed-off-by: Brian Schau <brian@schau.com> Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | Input: HID - add mapping for Powerbook USB keyboardStelian Pop2005-09-052-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Map custom HID events (such as the ones generated by some Logitech and Apple Powerbooks USB keyboards) to the FN keycode. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | Input: HID - add the Trust Predator TH 400 gamepad to the badpad listVojtech Pavlik2005-09-051-1/+3
| | | | | | | | | | | | | | | | | | Reported-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | Input: HID - add a quirk for the Apple PowermouseVojtech Pavlik2005-09-053-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Add a quirk for the Apple Powermouse, remapping GenericDesktop.Z to Rel.HWheel, to allow horizontal scrolling in Linux. Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | Input: HID - fix URB success status handlingVojtech Pavlik2005-09-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Add a missing break; statement to the URB status handling in hid-core.c, avoiding flushing the request queue on success. Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | Input: HID - add support for Logitech UltraX Media Remote controlMicah F. Galizia2005-09-051-2/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The hid now supports the Logitech UltraX Media Remote control. For now, ID 45 on the consumer usage page has been incorrectly mapped to KEY_RADIO since no other devices uses it. Signed-off-by: Micah F. Galizia <mfgalizi@csd.uwo.ca> Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | Input: HID - handle multi-transascion reportsMichael Haboustak2005-09-052-19/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes handling of multi-transaction reports for HID devices. New function hid_size_buffers() that calculates the longest report for each endpoint and stores the result in the hid_device object. These lengths are used to allocate buffers that are large enough to store any report on the endpoint. For compatibility, the minimum size for an endpoint buffer set to HID_BUFFER_SIZE rather than the known optimal case (the longest report length). It fixes bug #3063 in bugzilla. Signed-off-by: Michael Haboustak <mike-@cinci.rr.com> I simplified the patch a bit to use just a single buffer size. Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | Input: HID - add more consumer usagesVojtech Pavlik2005-09-053-9/+28
| | | | | | | | | | | | | | | | | | | | | | | | Extend mapping of the consumer usage page in hid-input.c to handle more cases appearing on new USB keyboards. Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | Input: add HID simulation mappingsVojtech Pavlik2005-09-053-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add simulation usage page mappings to hid-input.c to support a new crop of joysticks using them to designate Rudder and Throttle controls. Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | Inpur: recognize and ignore Logitech vendor usages in HIDVojtech Pavlik2005-09-052-0/+2
| | | | | | | | | | | | | | | | | | | | | These get in our way with MX mice. Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* | | [PATCH] vfree and kfree cleanup in drivers/Jesper Juhl2005-09-101-13/+13
| |/ |/| | | | | | | | | | | | | | | | | | | | | This patch does a full cleanup of 'NULL checks before vfree', and a partial cleanup of calls to kfree for all of drivers/ - the kfree bit is partial in that I only did the files that also had vfree calls in them. The patch also gets rid of some redundant (void *) casts of pointers being passed to [vk]free, and a some tiny whitespace corrections also crept in. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] timer initialization cleanup: DEFINE_TIMERIngo Molnar2005-09-091-2/+2
| | | | | | | | | | | | | | | | | | | | Clean up timer initialization by introducing DEFINE_TIMER a'la DEFINE_SPINLOCK. Build and boot-tested on x86. A similar patch has been been in the -RT tree for some time. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6 Linus Torvalds2005-09-0873-3904/+7032
|\ \
| * | [PATCH] USB: yealink: fix htons usage, documentation updatesHenk2005-09-081-3/+3
| | | | | | | | | | | | | | | Signed-off-by: Henk Vergonet <henk.vergonet@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] USB: fix endian issues in yealink driver.Greg Kroah-Hartman2005-09-081-2/+5
| | | | | | | | | | | | | | | | | | | | | sparse still complains about the htons usage, but I'll leave that for others to fix. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] input-driver-yealink-P1K-usb-phoneHenk2005-09-085-0/+1434
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch aggregates all modifications in the -mm tree and adds complete ringtone support. The following features are supported: - keyboard full support - LCD full support - LED full support - dialtone full support - ringtone full support - audio playback via generic usb audio diver - audio record via generic usb audio diver For driver documentation see: Documentation/input/yealink.txt For vendor documentation see: http://yealink.com Signed-off-by: Henk <Henk.Vergonet@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] USB Storage: code cleanups for onetouch.cNick Sillik2005-09-081-12/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As sugested by Alan Stern here are a few code cleanups for onetouch.c: -Check number of endpoints before directly referencing intf->endpoint[2] -Use defined constants instead of magic numbers -Revmove the non-ascii characters from copyright notice -Make registration and deregistration messages more similar Signed-off-by: Nick Sillik <n.sillik@temple.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] usbmon in 2.6.13: peeking into DMA areasPete Zaitcev2005-09-084-19/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This code looks at urb->transfer_dma, maps the page and takes the data. I am looking for volunteers to contribute architectures other than i386 or to develop an architecure-neutral API for it (or point me that it was done already). Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] ehci: add tt_usecsdavid-b@pacbell.net2005-09-083-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the field tt_usecs to ehci_qh and ehci_iso_stream, and sets it appropriately when setting them up as periodic endpoints. It records the transation translator's think_time (added in last patch) plus the downstream (i.e. low or full speed) bustime of the transfer associated with each interrupt or iso frame, as calculated by usb_calc_bus_time. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] ehci: add think_timedavid-b@pacbell.net2005-09-082-9/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds think_time to the usb_tt struct and sets it appropriately (measured in ns); this can help us implement better split transaction scheduling. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] USB: usbnet (9/9) module for pl2301/2302 cablesDavid Brownell2005-09-084-217/+179
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This wraps up the conversion of the "usbnet" driver structure, by moving the Prolific PL-2201/2302 minidriver to a module of its own. It also includes some minor cleanups to the remaining "usbnet" file, notably removing that long changelog at the top. Minor historical note: Linux 2.2 first called the driver for this hardware "plusb". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] USB: usbnet (8/9) module for RNDIS devicesDavid Brownell2005-09-084-8/+630
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds host-side RNDIS support to the "usbnet" driver, so Linux can talk to various devices (often based on WinCE) that otherwise only Windows could talk to. Tested with little-endian Linux talking to a Linux-USB Ethernet/RNDIS based peripheral. This also includes updates from Eddie C. Dost <ecd@brainaid.de> for big-endian SPARC Linux talking to a Nokia 9500 Communicator. It's still marked as EXPERIMENTAL because this code is so young. This ought to let Linux to work with various cable modems that previously would have been "Windows Only". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] USB: usbnet (7/9) module for CDC EthernetDavid Brownell2005-09-084-421/+537
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Makes the CDC Ethernet support live in a separate driver module. This module is a bit special since it exports utility functions that are reused by the the Zaurus and RNDIS drivers, but it's not "core" like usbnet itself. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] USB: usbnet (6/9) module for Zaurii and compatiblesDavid Brownell2005-09-085-367/+433
| | | | | | | | | | | | | | | | | | | | | | | | | | | This moves usbnet support for Zaurus and compatibles into its own module. Other than exporting a couple of helper functions, this just involved shuffling some code and updating the comments. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud