summaryrefslogtreecommitdiffstats
path: root/drivers/usb
Commit message (Collapse)AuthorAgeFilesLines
* Revert "powerpc/usb: fix issue of CPU halt when missing USB PHY clock"Greg Kroah-Hartman2012-03-022-10/+2
| | | | | | | | | | | | | | | | | | This reverts commit 529febeee680dc22416fca033151a5e8bc620447. To quote Dirk: This commit introduces a check for the USB PHY clock. Problem is that CTRL_PHY_CLK_VALID bit seems not to be present on all Freescale ehci implementations, at least P1022 does not have it. So this check always fails and the driver never gets loaded. So we need to revert this patch. Reported-by: Dirk Eibach <Eibach@gdsys.de> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: Added Kamstrup VID/PIDs to cp210x serial driver.Bruno Thomsen2012-02-211-0/+2
| | | | | | Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: Serial: ti_usb_3410_5052: Add Abbot Diabetes Care cable idAndrew Lunn2012-02-212-2/+8
| | | | | | | | | | | This USB-serial cable with mini stereo jack enumerates as: Bus 001 Device 004: ID 1a61:3410 Abbott Diabetes Care It is a TI3410 inside. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb-storage: fix freezing of the scanning threadAlan Stern2012-02-212-62/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1521b) fixes the interaction between usb-storage's scanning thread and the freezer. The current implementation has a race: If the device is unplugged shortly after being plugged in and just as a system sleep begins, the scanning thread may get frozen before the khubd task. Khubd won't be able to freeze until the disconnect processing is complete, and the disconnect processing can't proceed until the scanning thread finishes, so the sleep transition will fail. The implementation in the 3.2 kernel suffers from an additional problem. There the scanning thread calls set_freezable_with_signal(), and the signals sent by the freezer will mess up the thread's I/O delays, which are all interruptible. The solution to both problems is the same: Replace the kernel thread used for scanning with a delayed-work routine on the system freezable work queue. Freezable work queues have the nice property that you can cancel a work item even while the work queue is frozen, and no signals are needed. The 3.2 version of this patch solves the problem in Bugzilla #42730. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Seth Forshee <seth.forshee@canonical.com> CC: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Fix encoding for HS bulk/control NAK rate.Sarah Sharp2012-02-211-8/+24
| | | | | | | | | | | | | | | | | | | | | | | | The xHCI 0.96 spec says that HS bulk and control endpoint NAK rate must be encoded as an exponent of two number of microframes. The endpoint descriptor has the NAK rate encoded in number of microframes. We were just copying the value from the endpoint descriptor into the endpoint context interval field, which was not correct. This lead to the VIA host rejecting the add of a bulk OUT endpoint from any USB 2.0 mass storage device. The fix is to use the correct encoding. Refactor the code to convert number of frames to an exponential number of microframes, and make sure we convert the number of microframes in HS bulk and control endpoints to an exponent. This should be back ported to kernels as old as 2.6.31, that contain the commit dfa49c4ad120a784ef1ff0717168aa79f55a483a "USB: xhci - fix math in xhci_get_endpoint_interval" Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Felipe Contreras <felipe.contreras@gmail.com> Suggested-by: Andiry Xu <andiry.xu@amd.com> Cc: stable@vger.kernel.org
* USB: Set hub depth after USB3 hub resetElric Fu2012-02-211-13/+17
| | | | | | | | | | | | | | | | | | | | | | | | The superspeed device attached to a USB 3.0 hub(such as VIA's) doesn't respond the address device command after resume. The root cause is the superspeed hub will miss the Hub Depth value that is used as an offset into the route string to locate the bits it uses to determine the downstream port number after reset, and all packets can't be routed to the device attached to the superspeed hub. Hub driver sends a Set Hub Depth request to the superspeed hub except for USB 3.0 root hub when the hub is initialized and doesn't send the request again after reset due to the resume process. So moving the code that sends the Set Hub Depth request to the superspeed hub from hub_configure() to hub_activate() is to cover those situations include initialization and reset. The patch should be backported to kernels as old as 2.6.39. Signed-off-by: Elric Fu <elricfu1@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable@vger.kernel.org
* USB: Fix handoff when BIOS disables host PCI device.Sarah Sharp2012-02-211-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some systems with an Intel Panther Point xHCI host controller, the BIOS disables the xHCI PCI device during boot, and switches the xHCI ports over to EHCI. This allows the BIOS to access USB devices without having xHCI support. The downside is that the xHCI BIOS handoff mechanism will fail because memory mapped I/O is not enabled for the disabled PCI device. Jesse Barnes says this is expected behavior. The PCI core will enable BARs before quirks run, but it will leave it in an undefined state, and it may not have memory mapped I/O enabled. Make the generic USB quirk handler call pci_enable_device() to re-enable MMIO, and call pci_disable_device() once the host-specific BIOS handoff is finished. This will balance the ref counts in the PCI core. When the PCI probe function is called, usb_hcd_pci_probe() will call pci_enable_device() again. This should be back ported to kernels as old as 2.6.31. That was the first kernel with xHCI support, and no one has complained about BIOS handoffs failing due to memory mapped I/O being disabled on other hosts (EHCI, UHCI, or OHCI). Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Oliver Neukum <oneukum@suse.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@vger.kernel.org
* USB: option: cleanup zte 3g-dongle's pid in option.cli.rui27@zte.com.cn2012-02-141-130/+13
| | | | | | | | | | | | | 1. Remove all old mass-storage ids's pid: 0x0026,0x0053,0x0098,0x0099,0x0149,0x0150,0x0160; 2. As the pid from 0x1401 to 0x1510 which have not surely assigned to use for serial-port or mass-storage port,so i think it should be removed now, and will re-add after it have assigned in future; 3. sort the pid to WCDMA and CDMA. Signed-off-by: Rui li <li.rui27@zte.com.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: Don't fail USB3 probe on missing legacy PCI IRQ.Sarah Sharp2012-02-143-3/+13
| | | | | | | | | | | | | | | | | | Intel has a PCI USB xhci host controller on a new platform. It doesn't have a line IRQ definition in BIOS. The Linux driver refuses to initialize this controller, but Windows works well because it only depends on MSI. Actually, Linux also can work for MSI. This patch avoids the line IRQ checking for USB3 HCDs in usb core PCI probe. It allows the xHCI driver to try to enable MSI or MSI-X first. It will fail the probe if MSI enabling failed and there's no legacy PCI IRQ. This patch should be backported to kernels as old as 2.6.32. Signed-off-by: Alex Shi <alex.shi@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
* xhci: Fix oops caused by more USB2 ports than USB3 ports.Sarah Sharp2012-02-101-1/+1
| | | | | | | | | | | | | | The code to set the device removable bits in the USB 2.0 roothub descriptor was accidentally looking at the USB 3.0 port registers instead of the USB 2.0 registers. This can cause an oops if there are more USB 2.0 registers than USB 3.0 registers. This should be backported to kernels as old as 2.6.39, that contain the commit 4bbb0ace9a3de8392527e3c87926309d541d3b00 "xhci: Return a USB 3.0 hub descriptor for USB3 roothub." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
* USB: usbserial: add new PID number (0xa951) to the ftdi driverMilan Kocian2012-02-032-0/+8
| | | | | | Signed-off-by: Milan Kocian <milon@wq.cz> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'for-3.3-rc3' of ↵Greg Kroah-Hartman2012-02-032-2/+3
|\ | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Few fixes for 3.3-rc3, nothing major. Mostly build fixes introduced recently. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: musb: fix a build error on mipsCong Wang2012-02-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On mips, we got: drivers/usb/musb/musb_io.h:44: error: conflicting types for 'readsl' arch/mips/include/asm/io.h:529: error: previous definition of 'readsl' was here drivers/usb/musb/musb_io.h:46: error: conflicting types for 'readsw' arch/mips/include/asm/io.h:528: error: previous definition of 'readsw' was here drivers/usb/musb/musb_io.h:48: error: conflicting types for 'readsb' so, should add !defined(CONFIG_MIPS) too. Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: otg: mv_otg: Add dependenceNeil Zhang2012-01-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | This otg driver depends on marvell EHCI driver, so add the dependence. It can fix the following build error on i386: ERROR: "usb_remove_hcd" [drivers/usb/otg/mv_otg.ko] undefined! ERROR: "usb_add_hcd" [drivers/usb/otg/mv_otg.ko] undefined! Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: gadget: zero: fix bug in loopback autoresume handlingTimo Juhani Lindfors2012-01-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | ab943a2e125b (USB: gadget: gadget zero uses new suspend/resume hooks) introduced a copy-paste error where f_loopback.c writes to a variable declared in f_sourcesink.c. This prevents one from creating gadgets that only have a loopback function. Cc: stable <stable@vger.kernel.org> Signed-off-by: Timo Juhani Lindfors <timo.lindfors@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | uwb & wusb & usb wireless controllers: fix kconfig error & build errorsRandy Dunlap2012-02-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix kconfig warnings and build errors in UWB/WUSB/USB_HWA etc. by making all of these related symbols depend on UWB. warning: (USB_WHCI_HCD && USB_HWA_HCD) selects USB_WUSB which has unmet direct dependencies (USB_SUPPORT && EXPERIMENTAL && USB && PCI && UWB) warning: (USB_HWA_HCD) selects UWB_HWA which has unmet direct dependencies (UWB && USB) which lead to: ERROR: "uwb_rsv_establish" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_pal_register" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rsv_get_usable_mas" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rsv_destroy" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_radio_stop" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rsv_terminate" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_pal_unregister" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_pal_init" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rc_reset_all" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_radio_start" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rsv_create" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rc_put" [drivers/usb/host/whci/whci-hcd.ko] undefined! ERROR: "uwb_rc_get_by_grandpa" [drivers/usb/host/whci/whci-hcd.ko] undefined! ERROR: "__umc_driver_register" [drivers/usb/host/whci/whci-hcd.ko] undefined! ERROR: "umc_driver_unregister" [drivers/usb/host/whci/whci-hcd.ko] undefined! ERROR: "whci_wait_for" [drivers/usb/host/whci/whci-hcd.ko] undefined! ERROR: "uwb_rc_get_by_grandpa" [drivers/usb/host/hwa-hc.ko] undefined! ERROR: "uwb_rc_put" [drivers/usb/host/hwa-hc.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: Skip PCI USB quirk handling for Netlogic XLPJayachandran C2012-02-021-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Netlogic XLP SoC's on-chip USB controller appears as a PCI USB device, but does not need the EHCI/OHCI handoff done in usb/host/pci-quirks.c. The pci-quirks.c is enabled for all vendors and devices, and is enabled if USB and PCI are configured. If we do not skip the qurik handling on XLP, the readb() call in ehci_bios_handoff() will cause a crash since byte access is not supported for EHCI registers in XLP. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | powerpc/usb: fix issue of CPU halt when missing USB PHY clockShengzhou Liu2012-02-022-2/+10
| | | | | | | | | | | | | | | | | | when missing USB PHY clock, kernel booting up will halt during USB initialization. We should check USBGP[PHY_CLK_VALID] bit to avoid CPU hang in this case. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: otg: mv_otg: Add dependenceNeil Zhang2012-02-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | This otg driver depends on marvell EHCI driver, so add the dependence. It can fix the following build error on i386: ERROR: "usb_remove_hcd" [drivers/usb/otg/mv_otg.ko] undefined! ERROR: "usb_add_hcd" [drivers/usb/otg/mv_otg.ko] undefined! Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: host: Distinguish Kconfig text for Freescale controllersFabio Estevam2012-02-021-2/+2
| | | | | | | | | | | | | | Distinguish Kconfig text by providing the Freescale family name. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: add new zte 3g-dongle's pid to option.cRui li2012-02-011-1/+128
| | | | | | | | | | | | | | | | | | | | As ZTE have and will use more pid for new products this year, so we need to add some new zte 3g-dongle's pid on option.c , and delete one pid 0x0154 because it use for mass-storage port. Signed-off-by: Rui li <li.rui27@zte.com.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: qcserial: don't enable autosuspendThomas Tuttle2012-02-011-2/+0
| | | | | | | | | | | | | | | | We've found that qcserial devices will not always wake up reliably from autosuspend, so disable it. Signed-off-by: Thomas Tuttle <ttuttle@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | USB: qcserial: add several new serial devicesThomas Tuttle2012-02-011-0/+14
| | | | | | | | | | Signed-off-by: Thomas Tuttle <ttuttle@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | Merge tag 'usb-3.3-rc1' of ↵Linus Torvalds2012-01-3036-2593/+224
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Here are a bunch of USB patches for 3.3-rc1. Nothing major, largest thing here is the removal of some drivers that did not work at all. Other than that, the normal collection of bugfixes and new device ids. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> * tag 'usb-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (52 commits) uwb & wusb: fix kconfig error USB: Realtek cr: fix autopm scheduling while atomic USB: ftdi_sio: Add more identifiers xHCI: Cleanup isoc transfer ring when TD length mismatch found usb: musb: omap2430: minor cleanups. qcaux: add more Pantech UML190 and UML290 ports Revert "drivers: usb: Fix dependency for USB_HWA_HCD" usb: mv-otg - Fix build if CONFIG_USB is not set USB: cdc-wdm: Avoid hanging on interface with no USB_CDC_DMM_TYPE usb: add support for STA2X11 host driver drivers: usb: Fix dependency for USB_HWA_HCD kernel-doc: fix new warning in usb.h USB: OHCI: fix new compiler warnings usb: serial: kobil_sct: fix compile warning: drivers/usb/host/ehci-fsl.c: add missing iounmap USB: cdc-wdm: better allocate a buffer that is at least as big as we tell the USB core USB: cdc-wdm: call wake_up_all to allow driver to shutdown on device removal USB: cdc-wdm: use two mutexes to allow simultaneous read and write USB: cdc-wdm: updating desc->length must be protected by spin_lock USB: usbsevseg: fix max length ...
| * | uwb & wusb: fix kconfig errorRandy Dunlap2012-01-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix UWB/WUSB kconfig error by changing 'select' to 'depends on'. drivers/usb/wusbcore/Kconfig:4:error: recursive dependency detected! drivers/usb/wusbcore/Kconfig:4: symbol USB_WUSB is selected by USB_HWA_HCD drivers/usb/host/Kconfig:559: symbol USB_HWA_HCD depends on UWB drivers/uwb/Kconfig:5: symbol UWB is selected by USB_WUSB Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: Realtek cr: fix autopm scheduling while atomicStanislaw Gruszka2012-01-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=784345 Reported-by: Francis Moreau <francis.moro@gmail.com> Reported-and-tested-by: Christian D <chrisudeussen@gmail.com> Reported-and-tested-by: Jimmy Dorff <jdorff@phy.duke.edu> Reported-and-tested-by: collura@ieee.org Cc: stable@vger.kernel.org # 3.2+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: ftdi_sio: Add more identifiersAlan Cox2012-01-262-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | 0x04d8, 0x000a: Hornby Elite Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | xHCI: Cleanup isoc transfer ring when TD length mismatch foundAndiry Xu2012-01-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a TD length mismatch is found during isoc TRB enqueue, it directly returns -EINVAL. However, isoc transfer is partially enqueued at this time, and the ring should be cleared. This should be backported to kernels as old as 2.6.36, which contain the commit 522989a27c7badb608155b1f1dea3487ed431f74 "xhci: Fix failed enqueue in the middle of isoch TD." Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
| * | Merge branch 'for-greg' of ↵Greg Kroah-Hartman2012-01-2516-2497/+37
| |\ \ | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus * 'for-greg' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: musb: omap2430: minor cleanups. usb: dwc3: unmap the proper number of sg entries usb: musb: fix shutdown while usb gadget is in use usb: gadget: f_mass_storage: Use "bool" instead of "int" in fsg_module_parameters usb: gadget: check for streams only for SS udcs usb: gadget: fsl_udc: fix the usage of udc->max_ep drivers: usb: otg: Fix dependencies for some OTG drivers usb: renesas: silence uninitialized variable report in usbhsg_recip_run_handle() usb: gadget: SS Isoc endpoints use comp_desc->bMaxBurst too usb: gadget: storage: endian fix usb: dwc3: ep0: fix compile warning usb: musb: davinci: fix build breakage usb: gadget: langwell: don't call gadget's disconnect() usb: gadget: langwell: drop langwell_otg support usb: otg: kill langwell_otg driver usb: dwc3: ep0: tidy up Pending Request handling
| | * usb: musb: omap2430: minor cleanups.NeilBrown2012-01-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | 1/ remove incorrect comment (it is a non-blocking notifier) 2/ Use correct symbolic return value for notifier 3/ Make sure otg_notifier_work is cancelled before module exit. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * usb: dwc3: unmap the proper number of sg entriesSebastian Andrzej Siewior2012-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | num_sgs contains the number of sgs assigned by the gadget. num_mapped_sgs contains the number of mapped sgs which may differ from the gadget's values. For dma_unmap_sg() we have to provide the value which was returned by dma_map_sg(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * usb: musb: fix shutdown while usb gadget is in useGrazvydas Ignotas2012-01-241-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we shutdown without stopping the gadget first or removing the cable, gadget manages to configure itself again: root@pandora /root# poweroff The system is going down NOW! Requesting system poweroff [ 47.714385] musb-hm halted. [ 48.120697] gadget: suspend [ 48.123748] gadget: reset config [ 48.127227] gadget: ecm deactivated [ 48.130981] usb0: gether_disconnect [ 48.281799] gadget: high-speed config #1: CDC Ethernet (ECM) [ 48.287872] gadget: init ecm [ 48.290985] gadget: notify connect false [ 48.295288] gadget: notify speed 425984000 This is not only unwanted, it's also happening on half-unitialized state, after musb_shutdown() has returned, which sometimes causes hardware to fail to work after reboot. Let's better properly stop gadget on shutdown too. This patch moves musb_gadget_cleanup out of musb_free(), which has 2 callsites: probe error path and musb_remove. On probe error path it was superflous since musb_gadget_cleanup is called explicitly there, and musb_remove() calls musb_shutdown(), so cleanup will get called as before. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * usb: gadget: f_mass_storage: Use "bool" instead of "int" in ↵Fabio Estevam2012-01-241-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fsg_module_parameters Fix the following build warnings: CC [M] drivers/usb/gadget/acm_ms.o drivers/usb/gadget/acm_ms.c: In function ‘__check_ro’: drivers/usb/gadget/acm_ms.c:119: warning: return from incompatible pointer type drivers/usb/gadget/acm_ms.c: In function ‘__check_removable’: drivers/usb/gadget/acm_ms.c:119: warning: return from incompatible pointer type drivers/usb/gadget/acm_ms.c: In function ‘__check_cdrom’: drivers/usb/gadget/acm_ms.c:119: warning: return from incompatible pointer type drivers/usb/gadget/acm_ms.c: In function ‘__check_nofua’: drivers/usb/gadget/acm_ms.c:119: warning: return from incompatible pointer type drivers/usb/gadget/acm_ms.c: In function ‘__check_stall’: drivers/usb/gadget/acm_ms.c:119: warning: return from incompatible pointer type CC [M] drivers/usb/gadget/mass_storage.o drivers/usb/gadget/mass_storage.c: In function ‘__check_ro’: drivers/usb/gadget/mass_storage.c:94: warning: return from incompatible pointer type drivers/usb/gadget/mass_storage.c: In function ‘__check_removable’: drivers/usb/gadget/mass_storage.c:94: warning: return from incompatible pointer type drivers/usb/gadget/mass_storage.c: In function ‘__check_cdrom’: drivers/usb/gadget/mass_storage.c:94: warning: return from incompatible pointer type drivers/usb/gadget/mass_storage.c: In function ‘__check_nofua’: drivers/usb/gadget/mass_storage.c:94: warning: return from incompatible pointer type drivers/usb/gadget/mass_storage.c: In function ‘__check_stall’: drivers/usb/gadget/mass_storage.c:94: warning: return from incompatible pointer type Declare the fsg_module_parameters fields as "bool" so that they can match the types passed in FSG_MODULE_PARAM_ARRAY macro. Since commit 493c90ef (module_param: check that bool parameters really are bool.), moduleparam.h was changed in a way that the "bool" parameter type now really requires "bool" type and no longer allows "unsigned int". Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * usb: gadget: check for streams only for SS udcsSebastian Andrzej Siewior2012-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the UASP gadget fails to bind on an UDC which does not provide stream support. This is true for all udc in tree except for dummy and dwc3 since they don't support SuperSpeed. There is no need to test for the availability of stream support on those UDCs because we will never even try to use them. I think it is sane to assume that StreamSupport is always available on SuperSpeed since it is one of the key features. The host side will only allocate on SS so this part is also fine. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * usb: gadget: fsl_udc: fix the usage of udc->max_epPeter Chen2012-01-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The max_ep is the number of endpoint * 2. But in dtd_complete_irq, it does again * 2, it will deference wrong memory after scanning max_ep - 1. The another similar problem is at USB_REQ_SET_FEATURE (the pipe number should be 0 and max_ep - 1). Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Matthieu castet <matthieu.castet@parrot.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * drivers: usb: otg: Fix dependencies for some OTG driversFabio Estevam2012-01-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following build warning: warning: (USB_LANGWELL_OTG && FSL_USB2_OTG && USB_MV_OTG) selects USB_OTG which has unmet direct dependencies (USB_SUPPORT && USB && EXPERIMENTAL && USB_SUSPEND) Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * usb: renesas: silence uninitialized variable report in usbhsg_recip_run_handle()Jesper Juhl2012-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In drivers/usb/renesas_usbhs/mod_gadget.c::usbhsg_recip_run_handle() the Coverity Prevent checker currently flags a warning about possibly uninitialized use of 'ret' i usbhsg_recip_run_handle(). It does this since it assumes we take one of the non-default branches in the switch and then subsequently take the false branch in the 'if (func)' case below. This exact scenario will never happen, but Coverity can't see that for some reason. This patch initializes 'ret' to '0' when it is declared which should shut up this report and won't really hurt - so why not? At least then it's clear that 'ret' is always initialized.. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * usb: gadget: SS Isoc endpoints use comp_desc->bMaxBurst tooPaul Zimmerman2012-01-241-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | SuperSpeed Isoc endpoints also use the bMaxBurst value from the companion descriptor. See section 9.6.7 in the USB 3.0 spec. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * usb: gadget: storage: endian fixAndiry Xu2012-01-241-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Fix some endian issues for storage gadgets. Cc: stable@vger.kernel.org Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * usb: dwc3: ep0: fix compile warningFelipe Balbi2012-01-241-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 34c60a7 (usb: dwc3: ep0: tidy up Pending Request handling) introduced a compile warning by leaving an unused variable. This patch fixes that warning: drivers/usb/dwc3/ep0.c: In function ‘__dwc3_gadget_ep0_queue’: drivers/usb/dwc3/ep0.c:129:8: warning: unused variable ‘type’ [-Wunused-variable] Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * usb: musb: davinci: fix build breakageSekhar Nori2012-01-241-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 0020afb369859472a461ef4af6410732e929d402 (ARM: mach-davinci: remove mach/memory.h) removed mach/memory.h for DaVinci which broke DaVinci MUSB build. mach/memory.h is not actually needed in davinci.c, so remove it. While at it, also remove some more machine specific inclulde files which are not needed for build. Tested on DM644x EVM using USB card reader. Cc: stable@vger.kernel.org # v3.2 Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * usb: gadget: langwell: don't call gadget's disconnect()Alexander Shishkin2012-01-241-10/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | UDC core will call disconnect() and unbind() for us upon the gadget removal, so we should not do it ourselves. Otherwise, a composite gadget will explode, for example. Others might too. This was introduced during conversion to new style gadget in 2c7f0989 (usb: gadget: langwell: convert to new style). Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: stable@vger.kernel.org # v3.2 Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * usb: gadget: langwell: drop langwell_otg supportAlexander Shishkin2012-01-242-88/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since there is no working (or even compilable) OTG_TRANSCEIVER support for this driver, remove the dead code which depends on it at compile time. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: stable@vger.kernel.org # v2.6.31+ Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * usb: otg: kill langwell_otg driverAlexander Shishkin2012-01-243-2362/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The way this driver was added by f0ae849 (usb: Add Intel Langwell USB OTG Transceiver Driver) never even compiled together with langwell_udc, and that's the only way for it to be useful. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: stable@vger.kernel.org # v2.6.31+ Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alan Cox <alan@linux.intel.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <balbi@ti.com>
| | * usb: dwc3: ep0: tidy up Pending Request handlingFelipe Balbi2012-01-241-10/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The way our code was written, we should never have a DWC3_EP_PENDING_REQUEST flag set out of a Data Phase and the code in __dwc3_gadget_ep0_queue() did not reflect that situation properly. Tidy up that case to avoid any possible mistakes when starting requests for IRQs which are long gone. Cc: stable@vger.kernel.org Signed-off-by: Felipe Balbi <balbi@ti.com>
| * | qcaux: add more Pantech UML190 and UML290 portsDan Williams2012-01-241-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | More ports we now know how to talk to. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | Revert "drivers: usb: Fix dependency for USB_HWA_HCD"Greg Kroah-Hartman2012-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 0dd2b62ada6f911fbd13e98e98f57f4edc42c604. It causes a bunch of Kconfig errors: drivers/usb/host/Kconfig:559:error: recursive dependency detected! drivers/usb/host/Kconfig:559: symbol USB_HWA_HCD depends on UWB drivers/uwb/Kconfig:5: symbol UWB is selected by USB_WUSB drivers/usb/wusbcore/Kconfig:4: symbol USB_WUSB is selected by USB_HWA_HCD showing that this really wasn't the correct fix at all. Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | usb: mv-otg - Fix build if CONFIG_USB is not setGeert Uytterhoeven2012-01-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ERROR: "usb_remove_hcd" [drivers/usb/otg/mv_otg.ko] undefined! ERROR: "usb_add_hcd" [drivers/usb/otg/mv_otg.ko] undefined! Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> -- Inpired by drivers/usb/otg/msm_otg.c. Is this correct? drivers/usb/otg/mv_otg.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: cdc-wdm: Avoid hanging on interface with no USB_CDC_DMM_TYPEBjørn Mork2012-01-241-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The probe does not strictly require the USB_CDC_DMM_TYPE descriptor, which is a good thing as it makes the driver usable on non-conforming interfaces. A user could e.g. bind to it to a CDC ECM interface by using the new_id and bind sysfs files. But this would fail with a 0 buffer length due to the missing descriptor. Fix by defining a reasonable fallback size: The minimum device receive buffer size required by the CDC WMC standard, revision 1.1 Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | usb: add support for STA2X11 host driverAlessandro Rubini2012-01-242-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Cc: Alan Cox <alan@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud