summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla4xxx/ql4_nx.c
Commit message (Collapse)AuthorAgeFilesLines
* qla4xxx: Use pci_enable_msix_exact() instead of pci_enable_msix()Alexander Gordeev2014-07-301-1/+1
| | | | | | | | | | | | | As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-By: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* qla4xxx: Check for correct return statusVikas Chaudhary2014-05-191-1/+1
| | | | | | | | | Check for correct return status in function - qla4_8xxx_minidump_pex_dma_read Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
* qla4xxx: qla4xxx: Move qla4_8xxx_ms_mem_write_128b to ql4_nx.cVikas Chaudhary2014-05-191-0/+106
| | | | | | Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
* qla4xxx: Added PEX DMA Support for ISP8022 AdapterTej Parkash2014-05-191-11/+4
| | | | | | | Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
* qla4xxx: Added new opcodes for 84XX Minidump templateTej Parkash2014-05-191-0/+335
| | | | | | | | | | Updated driver with new opcode (RDDFE, RDMDIO and POLLWR) which are added with latest firmware minidump template Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
* [SCSI] qla4xxx: Reduce rom-lock contention during reset recovery.Vikas Chaudhary2014-03-151-21/+12
| | | | | | | | | | | | | | | | | | | | | | | | Issue: Driver holds rom-lock for too long during reset recovery. During adapter reset testing, it was found that the driver holds the rom-lock for too long, because of which other drivers fail to acquire the rom-lock, leading to reset failures. The primary cause is, in the bootstrap code, while holding the rom-lock, the driver checks if the peg is halted, causing a 2 second contention. Fix: When a reset recovery starts, the driver deduces the cause, and sets appropriate flags in watchdog & recover_adapter routines. This flag should be used to determine if bootstrap is invoked from probe or reset context, reducing the rom-lock footprint of the drivers. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla4xxx: Driver not able to collect minidump for ISP84xxTej Parkash2014-03-151-1/+7
| | | | | | | | | | | | | | | | Issue: minidump data collection fails as driver reports data mismatch Fix: When the driver encounters a new entry type that it cannot process, it should just skip the entry and adjust the total buffer size by subtracting the skipped bytes from it. This is to ensure that there is no data mismatch because of the new entries. Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla4xxx: Fix processing response queue during probeTej Parkash2014-03-151-0/+4
| | | | | | | | | | | | | | | | | | | Issue: While booting with kdump kernel, driver receive IOCB interrupts for which it is not ready which results in processing them before init_firmware during driver probe Fix: Two steps solution 1. Make driver ready to process the interrupt before interupts handlers is registered. 2. Stop driver processing iocb interrupts if not generated as per firmware protocol i.e R2H bit set Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla4xxx: Correctly handle msleep_interruptibleVikas Chaudhary2014-03-151-8/+2
| | | | | | | | | | If waiting for signals was interrupted then the device was put to FAILED state. Use msleep instead of msleep_interruptible to handle this correctly. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla4xxx: Use IDC_CTRL bit1 directly instead of AF_83XX_NO_FWDUMP flag.Vikas Chaudhary2014-03-151-14/+1
| | | | | | | | | Removed AF_83XX_NO_FWDUMP flag and directly checking IDC_CTRL bit1 while taking minidump, to check for graceful reset. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla4xxx: ISP8xxx: Correct retry of adapter initializationNilesh Javali2014-03-151-0/+21
| | | | | | | | | | | | | | | | | | Issue: For ISP8xxx, adapter initialization is not retried if qla4xxx_initialize_adapter fails. Fix: If qla4xxx_initialize_adapter fails, first check if failure is due to IRQs not attached in order to skip retrial, then free the IRQs and then retry initializing the adapter. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla4xxx: Return error if minidump data collection failsVikas Chaudhary2013-09-031-0/+1
| | | | | | | | Return error from function qla4_8xxx_collect_md_data() if minidump data collection fails. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla4xxx: Fix the minidump data collection check in for loopSantosh Vernekar2013-09-031-5/+3
| | | | | | Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla4xxx: Add pex-dma support for capturing minidumpSantosh Vernekar2013-09-031-1/+225
| | | | | | | | | Add pex-dma support for ISP8324 and ISP8042 to improve the minidump capture time. Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla4xxx: Update Copyright headerVikas Chaudhary2013-09-031-1/+1
| | | | | Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla4xxx: Added support for ISP8042Vikas Chaudhary2013-09-031-30/+30
| | | | | Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2013-04-301-5/+14
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull first round of SCSI updates from James "Jej B" Bottomley: "The patch set is mostly driver updates (qla4, qla2 [ISF support updates], lpfc, aacraid [dual firmware image support]) and a few bug fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (47 commits) [SCSI] iscsi_tcp: support PF_MEMALLOC/__GFP_MEMALLOC [SCSI] libiscsi: avoid unnecessary multiple NULL assignments [SCSI] qla4xxx: Update driver version to 5.03.00-k8 [SCSI] qla4xxx: Added print statements to display AENs [SCSI] qla4xxx: Use correct value for max flash node entries [SCSI] qla4xxx: Restrict logout from boot target session using session id [SCSI] qla4xxx: Use correct flash ddb offset for ISP40XX [SCSI] isci: add CONFIG_PM_SLEEP to suspend/resume functions [SCSI] scsi_dh_alua: Add module parameter to allow failover to non preferred path without STPG [SCSI] qla2xxx: Update the driver version to 8.05.00.03-k. [SCSI] qla2xxx: Obtain loopback iteration count from bsg request. [SCSI] qla2xxx: Add clarifying printk to thermal access fail cases. [SCSI] qla2xxx: Remove duplicated include form qla_isr.c [SCSI] qla2xxx: Enhancements to support ISPFx00. [SCSI] qla4xxx: Update driver version to 5.03.00-k7 [SCSI] qla4xxx: Replace dev type macros with generic portal type macros [SCSI] scsi_transport_iscsi: Declare portal type string macros for generic use [SCSI] qla4xxx: Add flash node mgmt support [SCSI] libiscsi: export function iscsi_switch_str_param [SCSI] scsi_transport_iscsi: Add flash node mgmt support ...
| * [SCSI] qla4xxx: Add flash node mgmt supportAdheer Chandravanshi2013-04-111-2/+10
| | | | | | | | | | | | | | | | | | | | This patch allows iscsiadm to manage iSCSI target information stored on qla4xxx adapter flash on per host basis. Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] qla4xxx: Assign correct CHAP table address to FLTVikas Chaudhary2013-04-111-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue: If flash read for FLT fails, we are assigning wrong default address for CHAP table in FLT, which will cause CHAP table read/write to wrong address. Fix: Assign correct default CHAP table address to FLT. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | treewide: Fix typos in printk and commentMasanari Iida2013-03-181-1/+1
|/ | | | | Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* [SCSI] qla4xxx: Re-register IRQ handler while retrying initialize of adapterPoornima Vonti2013-01-301-1/+1
| | | | | | | | | | | | | | Problem: If initialization of adapter fails for some reason, then the interrupt handlers are released. The interrupt handlers are not registered again when initialization of adapter is retried. Solution: Re-register the interrupt handler when adapter initialization is retried. Signed-off-by: Poornima Vonti <poornima.vonti@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla4xxx: Correct the validation to check in get_sys_info mailboxNilesh Javali2013-01-301-2/+2
| | | | | | | | | | Check mbox_sts[3] instead of mbox_sts[4] for ISP83xx to validate size of data returned Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla4xxx: Fix MBOX intr switching from polling to intr mode for ISP83XXVikas Chaudhary2013-01-291-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | Issue: Mailbox command timed out after switching from polling mode to interrupt mode. Events:- 1. Mailbox interrupts are disabled 2. FW generates AEN and at same time driver enables Mailbox Interrupt 3. Driver issues new mailbox to Firmware In above case driver will not get AEN interrupts generated by FW in step #2 as FW generated this AEN when interrupts are disabled. During the same time driver enabled the mailbox interrupt, so driver will not poll for interrupt. Driver will never process AENs generated in step #2 and issues new mailbox to FW, but now FW is not able to post mailbox completion as AENs generated before are not processed by driver. Fix: Enable Mailbox / AEN interrupts before initializing FW in case of ISP83XX. This will make sure we process all Mailbox and AENs in interrupt mode. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* Merge tag 'scsi-for-linus' of ↵Linus Torvalds2012-10-021-475/+957
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull first round of SCSI updates from James Bottomley: "This is a large set of updates, mostly for drivers (qla2xxx [including support for new 83xx based card], qla4xxx, mpt2sas, bfa, zfcp, hpsa, be2iscsi, isci, lpfc, ipr, ibmvfc, ibmvscsi, megaraid_sas). There's also a rework for tape adding virtually unlimited numbers of tape drives plus a set of dif fixes for sd and a fix for a live lock on hot remove of SCSI devices. This round includes a signed tag pull of isci-for-3.6 Signed-off-by: James Bottomley <JBottomley@Parallels.com>" Fix up trivial conflict in drivers/scsi/qla2xxx/qla_nx.c due to new PCI helper function use in a function that was removed by this pull. * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (198 commits) [SCSI] st: remove st_mutex [SCSI] sd: Ensure we correctly disable devices with unknown protection type [SCSI] hpsa: gen8plus Smart Array IDs [SCSI] qla4xxx: Update driver version to 5.03.00-k1 [SCSI] qla4xxx: Disable generating pause frames for ISP83XX [SCSI] qla4xxx: Fix double clearing of risc_intr for ISP83XX [SCSI] qla4xxx: IDC implementation for Loopback [SCSI] qla4xxx: update copyrights in LICENSE.qla4xxx [SCSI] qla4xxx: Fix panic while rmmod [SCSI] qla4xxx: Fail probe_adapter if IRQ allocation fails [SCSI] qla4xxx: Prevent MSI/MSI-X falling back to INTx for ISP82XX [SCSI] qla4xxx: Update idc reg in case of PCI AER [SCSI] qla4xxx: Fix double IDC locking in qla4_8xxx_error_recovery [SCSI] qla4xxx: Clear interrupt while unloading driver for ISP83XX [SCSI] qla4xxx: Print correct IDC version [SCSI] qla4xxx: Added new mbox cmd to pass driver version to FW [SCSI] scsi_dh_alua: Enable STPG for unavailable ports [SCSI] scsi_remove_target: fix softlockup regression on hot remove [SCSI] ibmvscsi: Fix host config length field overflow [SCSI] ibmvscsi: Remove backend abstraction ...
| * [SCSI] qla4xxx: Update idc reg in case of PCI AERVikas Chaudhary2012-09-241-1/+1
| | | | | | | | | | | | | | | | | | Camram is reset by FW to default values after reboot/cold boot/pci reset. In case of AER, PCI may need to reset so we need to set correct idc reg value after PCIE error. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] qla4xxx: Print correct IDC versionVikas Chaudhary2012-09-241-1/+1
| | | | | | | | | | Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] qla4xxx: Update Copyright headerVikas Chaudhary2012-09-241-1/+1
| | | | | | | | | | | | Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] qla4xxx: Added support for ISP83XXVikas Chaudhary2012-09-241-44/+444
| | | | | | | | | | | | | | Signed-off-by: Poornima Vonti <poornima.vonti@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] qla4xxx: Added new function qla4_8xxx_get_minidumpVikas Chaudhary2012-09-241-9/+15
| | | | | | | | | | | | | | | | | | | | | | Move minidump code from qla4_8xxx_device_bootstrap() to new function qla4_8xxx_get_minidump() to make code more modular. Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] qla4xxx: Set IDC version in correct wayVikas Chaudhary2012-09-241-9/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue: Device can go to READY state from COLD and skip INITIALIZATION, In this case driver will never set IDC version from function qla4_8xxx_device_bootstrap(). Fix: 1. Set IDC version at start of function qla4_82xx_need_reset_handler(). 2. Set IDC version only if we are 1st driver to load. 3. Added new function qla4_8xxx_update_idc_reg() to set all idc reg at one place. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] qla4xxx: Added new functions in isp_opsVikas Chaudhary2012-09-241-109/+164
| | | | | | | | | | | | | | Signed-off-by: Poornima Vonti <poornima.vonti@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] qla4xxx: Clean-up and optimize macrosVikas Chaudhary2012-09-241-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove following unused define:- QLA82XX_MINIDUMP_OCM0_SIZE QLA82XX_MINIDUMP_L1C_SIZE QLA82XX_MINIDUMP_L2C_SIZE QLA82XX_MINIDUMP_COMMON_STR_SIZE QLA82XX_MINIDUMP_FCOE_STR_SIZE QLA82XX_MINIDUMP_MEM_SIZE QLA82XX_MAX_ENTRY_HDR Added following new define to optimize code:- MIU_TA_CTL_WRITE_ENABLE MIU_TA_CTL_WRITE_START MIU_TA_CTL_START_ENABLE Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] qla4xxx: Rename 82XX macrosVikas Chaudhary2012-09-241-76/+76
| | | | | | | | | | | | Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] qla4xxx: Update func name from ql4_ to qla4_Vikas Chaudhary2012-09-241-6/+6
| | | | | | | | | | | | | | | | | | ql4_8xxx_mark_entry_skipped to qla4_8xxx_mark_entry_skipped ql4_attr_is_visible to qla4_attr_is_visible Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] qla4xxx: Update structure and variable namesVikas Chaudhary2012-09-241-40/+40
| | | | | | | | | | | | Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] qla4xxx: Update function name from 8xxx to 82xxVikas Chaudhary2012-09-241-248/+249
| | | | | | | | | | | | Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] qla4xxx: Fix gcc warning for x86 systemVikas Chaudhary2012-09-141-1/+1
| | | | | | | | | | | | | | | | | | Fix warning:- drivers/scsi/qla4xxx/ql4_nx.c:1867:2: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘uint32_t’ [-Wformat] Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | [SCSI] qla4xxx: Use PCI Express Capability accessorsJiang Liu2012-08-231-3/+1
|/ | | | | | Use PCI Express Capability access functions to simplify qla4xxx driver. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* [SCSI] qla4xxx: remove unnecessary read of PCI_CAP_ID_EXPJon Mason2012-07-201-1/+1
| | | | | | | | | | The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by: Jon Mason <jdmason@kudzu.us> Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla4xxx: Capture minidump for ISP82XX on firmware failureTej Parkash2012-05-301-16/+722
| | | | | | | | | | | Added support to capture dump (Minidump) which allows us to catpure a snapshot of the firmware/hardware states at the time of firmware failure Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* Merge tag 'scsi-misc' of ↵Linus Torvalds2012-03-221-16/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 SCSI updates from James Bottomley: "The update includes the usual assortment of driver updates (lpfc, qla2xxx, qla4xxx, bfa, bnx2fc, bnx2i, isci, fcoe, hpsa) plus a huge amount of infrastructure work in the SAS library and transport class as well as an iSCSI update. There's also a new SCSI based virtio driver." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (177 commits) [SCSI] qla4xxx: Update driver version to 5.02.00-k15 [SCSI] qla4xxx: trivial cleanup [SCSI] qla4xxx: Fix sparse warning [SCSI] qla4xxx: Add support for multiple session per host. [SCSI] qla4xxx: Export CHAP index as sysfs attribute [SCSI] scsi_transport: Export CHAP index as sysfs attribute [SCSI] qla4xxx: Add support to display CHAP list and delete CHAP entry [SCSI] iscsi_transport: Add support to display CHAP list and delete CHAP entry [SCSI] pm8001: fix endian issue with code optimization. [SCSI] pm8001: Fix possible racing condition. [SCSI] pm8001: Fix bogus interrupt state flag issue. [SCSI] ipr: update PCI ID definitions for new adapters [SCSI] qla2xxx: handle default case in qla2x00_request_firmware() [SCSI] isci: improvements in driver unloading routine [SCSI] isci: improve phy event warnings [SCSI] isci: debug, provide state-enum-to-string conversions [SCSI] scsi_transport_sas: 'enable' phys on reset [SCSI] libsas: don't recover end devices attached to disabled phys [SCSI] libsas: fixup target_port_protocols for expanders that don't report sata [SCSI] libsas: set attached device type and target protocols for local phys ...
| * [SCSI] qla4xxx: Remove un-necessary print statmentLalit Chandivade2012-02-191-4/+1
| | | | | | | | | | | | | | | | | | | | | | On ROM lock acquiring timeout failure, driver spews lot of warning messages in a for loop, remove the unwanted warning message to reduce kernel messages clutter. Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] qla4xxx: Remove unused codeVikas Chaudhary2012-02-191-12/+0
| | | | | | | | | | | | | | | | | | This code initially added for FW debugging, we don't need this code now so taking it out. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | asm-generic: architecture independent readq/writeq for 32bit environmentHitoshi Mitake2012-02-211-21/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This provides unified readq()/writeq() helper functions for 32-bit drivers. For some cases, readq/writeq without atomicity is harmful, and order of io access has to be specified explicitly. So in this patch, new two header files which contain non-atomic readq/writeq are added. - <asm-generic/io-64-nonatomic-lo-hi.h> provides non-atomic readq/ writeq with the order of lower address -> higher address - <asm-generic/io-64-nonatomic-hi-lo.h> provides non-atomic readq/ writeq with reversed order This allows us to remove some readq()s that were added drivers when the default non-atomic ones were removed in commit dbee8a0affd5 ("x86: remove 32-bit versions of readq()/writeq()") The drivers which need readq/writeq but can do with the non-atomic ones must add the line: #include <asm-generic/io-64-nonatomic-lo-hi.h> /* or hi-lo.h */ But this will be nop in 64-bit environments, and no other #ifdefs are required. So I believe that this patch can solve the problem of 1. driver-specific readq/writeq 2. atomicity and order of io access This patch is tested with building allyesconfig and allmodconfig as ARCH=x86 and ARCH=i386 on top of tip/master. Cc: Kashyap Desai <Kashyap.Desai@lsi.com> Cc: Len Brown <lenb@kernel.org> Cc: Ravi Anand <ravi.anand@qlogic.com> Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: James Bottomley <James.Bottomley@parallels.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Roland Dreier <roland@purestorage.com> Cc: James Bottomley <jbottomley@parallels.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hitoshi Mitake <h.mitake@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [SCSI] qla4xxx: Clear the RISC interrupt bit during FW initSarang Radke2012-01-161-0/+5
| | | | | | | | | This patch fix kernel panic during kdump. Signed-off-by: Sarang Radke <sarang.radke@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla4xxx: Fix the IDC locking mechanismNilesh Javali2011-12-151-8/+11
| | | | | | | | | | This ensures the transition of dev_state from COLD to INITIALIZING is within lock and atomic. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla4xxx: Fix CPU lockups when ql4xdontresethba setMike Hernandez2011-12-151-0/+4
| | | | | | | | | | Fix issue where CPU lockup is seen when ql4xdontresethba is set and driver is "stuck" in NEED_RESET state handler. Signed-off-by: Mike Hernandez <michael.hernandez@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla4xxx: Do not add duplicate CHAP entry in FLASHLalit Chandivade2011-10-161-0/+7
| | | | | | | | | | | | | | | | | | | | | | QLogic applications store the CHAP information in FLASH. During login, authentication information is provided using an index into the CHAP region. In order to support QLogic applications along with iscsiadm, updated the LLD to not add duplicate CHAP entries in the CHAP region and preserve the existing CHAP info in the CHAP region in FLASH. This allows QLogic applications to pre-write the CHAP entries in the CHAP region. With iscsiadm, when the CHAP authentication information is sent to the LLD, the LLD searches for the entry in CHAP region in FLASH, if exists then do not add. If CHAP entry does not exist then add the CHAP entry in the CHAP region. JIRA Key: UPSISCSI-146 Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla4xxx: Add new FLT firmware regionNilesh Javali2011-10-161-0/+1
| | | | | | | Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla4xxx: Added vendor specific sysfs attributesVikas Chaudhary2011-08-271-0/+5
| | | | | | | | | | Added board_id, fw_state, phy_port_cnt, phy_port_num, iscsi_func_cnt, hba_model Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
OpenPOWER on IntegriCloud