summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla2xxx/qla_mbx.c
Commit message (Collapse)AuthorAgeFilesLines
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* [SCSI] qla2xxx: Add BSG support for FC ELS/CT passthrough and vendor commands.Giridhar Malavali2010-01-181-0/+151
| | | | | | | [jejb: fixed printk casting issues] Signed-off-by: Sarang Radke <sarang.radke@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Extend base EEH support in qla2xxx.Andrew Vasquez2009-12-301-4/+27
| | | | | Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Get the link data rate explicitly during device resync.Michael Hernandez2009-12-301-0/+33
| | | | | | | | | | When the hba port gets logged out of the fabric, or other such transitional state when the physical link is still present, the driver doesn't receive a loop up asyn event (where the link data rate currently gets set). Hence send a explicit mailbox command to get the link rate in such conditions. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Properly re-register FC4/FDMI after physical and logical ↵Andrew Vasquez2009-12-041-3/+8
| | | | | | | | | | | | | link disruptions. Original code would not register FC4 nor FDMI information after a logical tear-down of an VFC link. Code now triggers registration date during processing of a 'Report ID Acquisition IOCB', which is submitted after a FLOGI or FDISC completes. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Properly check FCP_RSP response-info field after TMF completion.Andrew Vasquez2009-12-041-4/+22
| | | | | | | | | | Original code discarded response-info field information and assumed the command completed successfully without verifying the target's status within the FCP_RSP packet. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Retrieve firmware's maximum number of supported FCFs.Andrew Vasquez2009-12-041-4/+9
| | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Fix to ensure driver works in sinlge queue mode if ↵Anirban Chakraborty2009-08-221-2/+2
| | | | | | | | | | | | multiqueue fails When the multiqueue mode fails to work, the driver falls back on single queue mode. This ensures that the firmware is reinitialized with single queue options and all the resources are readjusted accordingly. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Correct display of vp_count in debug printk.Andrew Vasquez2009-08-221-1/+2
| | | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* qla2xxx: Limit querying to supported mailbox-registers while reading FW state.Andrew Vasquez2009-06-211-5/+10
| | | | | | | | Pre-ISP24xx chips have dedicated uses for mailbox 4 and 5 which software should typically not query nor update. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* qla2xxx: Correct iiDMA-update calling conventions.Harish Zunjarrao2009-06-211-6/+7
| | | | | | | | | | * To set iiDMA speeds for ISP81XX, bits 5-0 are used whereas for other older ISPs bits 2-0 are used. * Pass proper VP index Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Synchronize MPI settings after a PE Reset.Andrew Vasquez2009-06-081-0/+63
| | | | | | | | Ensure MPS remains in synchronization across all NIC/FCoE functions after a reset. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Export additional firmware-states for application support.Andrew Vasquez2009-06-081-1/+3
| | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Add notification message when an NPIV fails to acquire a ↵Andrew Vasquez2009-06-081-1/+4
| | | | | | | port-id. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Check status of qla2x00_get_fw_version() call.Andrew Vasquez2009-06-081-2/+5
| | | | | | | | Unlike earlier ISPs, recent ISPs (ISP81xx) can in fact fail this mailbox command. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Export TLV data on supported ISPs.Andrew Vasquez2009-06-081-0/+37
| | | | | | | Firmware currently provides PB and PGF TLVs. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Export XGMAC statistics on supported ISPs.Andrew Vasquez2009-06-081-0/+38
| | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Don't try to 'stop' firmware if already in ROM code.Andrew Vasquez2009-05-201-0/+2
| | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Remove reference to request queue from scsi request block.Anirban Chakraborty2009-05-201-1/+1
| | | | | | | | | | srbs used to maintain a reference to the request queue on which it was enqueued. This is no longer required as the request queue pointer is now maintained in the scsi host that issues the srb. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Add CPU affinity support.Anirban Chakraborty2009-05-201-2/+8
| | | | | | | | | | | | | | Set the module parameter ql2xmultique_tag to 1 to enable this feature. In this mode, the total number of response queues created is equal to the number of online cpus. Turning the block layer's rq_affinity mode on enables requests to be routed to the proper cpu and at the same time it enables completion of the IO in a response queue that is affined to the cpu in the request path. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Add QoS support.Anirban Chakraborty2009-05-201-23/+40
| | | | | | | | | | | | Set the number of request queues to the module paramater ql2xmaxqueues. Each vport gets a request queue. The QoS value set to the request queues determines priority control for queued IOs. If QoS value is not specified, the vports use the default queue 0. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Correct compilation failures when DEBUG'n' options are enabled.Andrew Vasquez2009-05-201-1/+1
| | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Export additional FCoE attributes for application support.Andrew Vasquez2009-05-201-1/+13
| | | | | | | | Cull and export VN_Port MAC address and VLAN_ID information on supported FCoE ISPs. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Correct bus-reset behaviour with recent ISPs.Seokmann Ju2009-05-201-3/+0
| | | | | | | | | | | | | The short-circuit to skip the non-applicable 'full-login-lip' process on 81xx ISPs was nested too deeply in the 'bus-reset' routine, as the code in qla2x00_loop_reset() should skip the whole enable_lip_full_login process. The original code could cause device tear-down due to the qla2x00_wait_for_loop_ready() call taking a large amount of time. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Correct several PCI-EEH issues.Seokmann Ju2009-04-031-0/+3
| | | | | | | | | | | In addition to checking for potentially unnecessary iomem readX()/writeX() operations, a pci_channel_io_perm_failure should not trigger a full internal removal. Found during additional testing with pSeries blade systems. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Add EDC-update support.Joe Carnuccio2009-04-031-0/+78
| | | | | | | | Interface allows for the update of onboard EDC firmware present on mezzanine ISP25xx type cards. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Cleanup unused flags and #defines.Shyam Sundar2009-04-031-4/+0
| | | | | | | | General cleanup of extraneous/legacy crud. Additional cleanups and Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Add reset capabilities for application support.Lalit Chandivade2009-04-031-0/+26
| | | | | | | Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Additional cleanups and Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Add Flash-Access-Control support for recent ISPs.Joe Carnuccio2009-04-031-0/+97
| | | | | | | | | | | | | Given the low-level interface varies from one flash-part manufacturer to the next, the Flash-Access-Control (FAC) mailbox command makes the specific flash type transparent to the driver by encapsulating a basic set of accessor and update routines. Use these new routines where applicable by querying FAC opcode get-sector-size at init-time. Additional cleanups and Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Update MPI/PHY version retrieval codes.Andrew Vasquez2009-04-031-6/+8
| | | | | | | Reflects layout and format of latest specification. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Pass in optional extended-initialization control block.Andrew Vasquez2009-04-031-4/+12
| | | | | | | Recent ISPs use this data to configure FCF information. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Correct vport delete bug.Anirban Chakraborty2009-03-101-1/+2
| | | | | Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Properly acknowledge IDC notification messages.Andrew Vasquez2009-02-101-0/+26
| | | | | | | | | | | | | To ensure smooth operations amongst the FCoE and NIC side components of the ISP81xx chip, the FCoE driver (qla2xxx) must ensure the 10gb NIC driver (qlge) does not timeout waiting for IDC (Inter-Driver Communication) acknowledgments. The acknowledgment requirements are trivial -- a simple mirroring of incoming mailbox registers during the AEN to a process-context capable mailbox command. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Remove interrupt request bit check in the response ↵Anirban Chakraborty2009-02-101-8/+6
| | | | | | | | | | | | | | processing path in multiq mode. Correct response-queue-0 processing by instructing the firmware to run with interrupt-handshaking disabled, similarly to what is now done for all non-0 response queues. Since all response-queues now run in the same mode, the driver no longer needs the hot-path 'is-disabled-HCCR' test. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Always serialize mailbox command execution.Andrew Vasquez2009-01-251-10/+6
| | | | | | | | | | | Original code would incorrectly bypass serialization if the DPC thread were performing a big-hammer operation (ISP abort). This short circuit, though rare, would subsequently stomp on a secondary thread's mailbox command execution. Found during ISP81XX testing. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Add ISP81XX support.Andrew Vasquez2009-01-071-3/+22
| | | | | | | Codes to support new FCoE boards. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Use proper request/response queues with MQ instantiations.Andrew Vasquez2009-01-071-1/+1
| | | | | | | | | Original code would inadvertanly place I/Os on the default request-queue. Also, correctly pass in the proper MSI-X vector during response-queue initialization. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Don't fallback to interrupt-polling during re-initialization ↵Andrew Vasquez2009-01-071-3/+2
| | | | | | | | | | | with MSI-X enabled. ROMs in recent ISPs have MSI-X support, so it's no longer necessary for the driver to fallback to interrupt polling during ISP re-initialization. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Remove support for reading/writing HW-event-log.Andrew Vasquez2009-01-071-9/+0
| | | | | | | | Software should not touch this region of flash, as the firmware will be the only writer and consumer of the region. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: changes in multiq codeAnirban Chakraborty2008-12-291-2/+2
| | | | | | | | | | Following changes have been made: 1. Scan outstanding commands only in the queue where it is submitted 2. Update queue registers directly in the fast path 3. Queue specific BAR is remapped only for multiq capable adapters Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: add support for multi-queue adapterAnirban Chakraborty2008-12-291-14/+133
| | | | | | | | | | | | | | | | | | Following changes have been made. 1. qla_hw_data structure holds an array for request queue pointers, and an array for response queue pointers. 2. The base request and response queues are created by default. 3. Additional request and response queues are created at the time of vport creation. If queue resources are exhausted during vport creation, newly created vports use the default queue. 4. Requests are sent to the request queue that the vport was assigned in the beginning. 5. Responses are completed on the response queue with which the request queue is associated with. [fixup memcpy argument reversal spotted by davej@redhat.com] Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Code changes for vport bus resetAnirban Chakraborty2008-12-291-1/+1
| | | | | | | | | | The following patch changes the handling of bus reset when issued from a vport. In the bus reset code, an extra check is made to make sure that the lip reset is not done before resetting the targets if the bus reset came from a vport. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Refactor qla data structuresAnirban Chakraborty2008-12-291-367/+392
| | | | | | | | | | | | | | | | | | | Following changes have been made to the qla2xxx FC driver in preparation for the multi- queue and future SR IOV hardware. 1. scsi_qla_host structure has been changed to contain scsi host specific data only. 2. A new structure, qla_hw_data is created to contain HBA specific hardware data. 3. Request and response IO specific data strucures are created. 4. The global list of fcports for the hba is not maintained anymore, instead a fcport list is construted on per scsi_qla_host. Signed-of-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Do not honour max_vports from firmware for 2G ISPs and below.Shyam Sundar2008-11-051-1/+1
| | | | | | | | | For 23XX ISPs, max_vports may return an invalid value. Do not honour it. Cc: Stable Tree <stable@kernel.org> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Fix "occured" spelling errors.Bjorn Helgaas2008-10-031-2/+2
| | | | | | | | | | Fix "occured" spelling errors. Most of these are in comments, which I wouldn't normally bother with, but a couple are in printks, which irritate me more. So I just fixed them all at the same time. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Change GFP_ATOMIC to GFP_KERNEL for non-atomic allocations.Andrew Vasquez2008-10-031-1/+1
| | | | | | | Both call-sites are sleeping-capable. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Explicitly tear-down vports during PCI remove_one().Andrew Vasquez2008-08-161-1/+1
| | | | | | | | | | | | | | | | | | | | | During internal testing, we've seen issues (hangs) with the 'deferred' vport tear-down-processing typically accompanied with the fc_remove_host() call. This is due to the current implementation's back-end vport handling being performed by the physical-HA's DPC thread where premature shutdown could lead to latent vport requests without a processor. This should also address a problem reported by Gal Rosen (http://marc.info/?l=linux-scsi&m=121731664417358&w=2) where the driver would attempt to awaken a previously torn-down DPC thread from interrupt context by implicitly calling wake_up_process() rather than the driver's qla2xxx_wake_dpc() helper. Rather, than reshuffle the remove_one() device-removal code, during unload, depend on the driver's timer to wake-up the DPC process, by limiting wake-ups based on an 'unloading' flag. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Additional NPIV corrections.Andrew Vasquez2008-07-261-4/+3
| | | | | | | | | | | Minor fixes addressing: - rport managements during vport deletion. - acquire proper physical-ha during qla24xx_abort_command() and qla24xx_queuecommand() - do not needlessly acquire the pha for non-NPIV capable ISPs. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Verify the RISC is not in ROM code if firmware-load is disabled.Andrew Vasquez2008-07-261-0/+2
| | | | | | | | | Add an additional check to verify that the current executing firmware is in fact non-ROM code. The non-ROM Get-ID mailbox command is used for verification. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Always aquire the parent's hardware_lock.Seokmann Ju2008-07-261-4/+6
| | | | | | | | | While issuing a marker, manipulating the request/response queues and modifying the outstanding command array. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
OpenPOWER on IntegriCloud