summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/mpt2sas
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] mpt2sas: Do not call sas_is_tlr_enabled for RAID volumes.Kashyap, Desai2010-02-171-3/+5
| | | | | | | | | | For RAID volume sas_is_tlr_enabled call will hit BUG at scsi_transport_sas.c:163, since raid volume is not visible to sas transport layer. Now Added check to make sure arg pass in sas_is_tlr_enabled() is not a volume. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Bump version 04.100.01.00Kashyap, Desai2010-02-081-3/+3
| | | | | | | | Version upgraded to 04.100.01.00. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by: Eric Moore <eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Enable TLR for SSP TAPE drives (Added SAS Transport APIs)Kashyap, Desai2010-02-081-20/+35
| | | | | | | | | | | | If TLR is supported for end device, MPT2SAS driver will enable the TLR bit in the SCSI_IO for every request. If there is a response with MPI2_SCSITASKMGMT_RSP_INVALID_FRAME, the driver will turn off the TLR logic. [jejb: updated to new transport class TLR API] Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Update driver header to latest MPI Spec.Kashyap, Desai2010-02-086-40/+201
| | | | | | | | Update header to latest MPI SPEC revision. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by: Eric Moore <eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Added phy_enable and set_phy_speed sysfs callback support.Kashyap, Desai2010-02-083-17/+232
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added new callbacks phy_enable and set_phy_speed in the mpt2sas_transport_functions template. This will allow end user to enable/disable phys and change links rates using the SysFS interface. Current implementation only supports direct attached phys, but we could in the future add support for expander based phys. A new subroutine mpt2sas_config_set_sas_iounit_pg1 was added; this wrapper function used to send request to controller firmware to modify the phys and link rates. A new subroutine _transport_find_local_phy was added; a function for easly obtaining the local phy object for direct attached. Example to disable a phy echo 0 > /sys/class/phy3:0/enable Example to enable the same phy echo 1 > /sys/class/phy3:0/enable Example to change the link rate to 1.5 #echo "1.5 Gbit" > /sys/class/phy3:0/maximum_linkrate #cat /sys/class/phy3:0/negotiated_linkrate 1.5 Gbit Example to change the link rate to 3.0 #echo "3.0 Gbit" > /sys/class/phy3:0/maximum_linkrate #cat /sys/class/phy3:0/negotiated_linkrate 3.0 Gbit Example to change the link rate to 6.0 #echo "6.0 Gbit" > /sys/class/phy3:0/maximum_linkrate #cat /sys/class/phy3:0/negotiated_linkrate 6.0 Gbit Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by: Eric Moore <eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Added raid transport supportKashyap, Desai2010-02-083-4/+189
| | | | | | | | | | | Adding support for raid transport layer. This will provide sysfs attributes containing raid level, state, and resync rate. MPT2SAS module will select RAID_ATTRS. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by: Eric Moore <eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Use compat_ptr to setup the pointer compatibility.Kashyap, Desai2010-02-081-8/+4
| | | | | | | | | | | On ppc64, an 32bit application was failing due to data buffers not being copied properly from user to kernel memory. The problem due to improper conversion of 32 to 64 bit pointers. The fix is to use compat_ptr to setup the pointer compatibility in the routine _ctl_compat_mpt_command. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by: Eric Moore <eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Set ioc->fwfault_debug to the cmd line option ↵Kashyap, Desai2010-02-081-2/+3
| | | | | | | | | | | | mpt2sas_fwfault_debug. (1) change the formentioned string from logging_level to fwfault_debug (2) set ioc->fwfault_debug to the command line option mpt2sas_fwfault_debug setting at driver load time. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by: Eric Moore <eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: User resource_size_t instead of unsigned longKashyap, Desai2010-02-082-8/+9
| | | | | | | | | | | | | Use resource_size_t to define the type resource for the system interface register set. The existing implementation was using "unsigned long" which would be 32 bit in 32 bit OS. If 32 bit OS is using 64 bit physical address space for the system interface register set, we need to shift to using resource_size_t which takes care of physical address space. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by: Eric Moore <eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Return -ENODATA on IOCTL timeoutKashyap, Desai2010-02-081-0/+1
| | | | | | | | | The driver was modified to return -ENODATA when there is a timeout via ioctl path. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by: Eric Moore <eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Delete volume before HBA detach.Kashyap, Desai2010-02-081-0/+17
| | | | | | | | | | | | | | The driver hangs when doing `rmmod mpt2sas` if there are any IR volumes present.The hang is due the scsi midlayer trying to access the IR volumes after the driver releases controller resources. Perhaps when scsi_remove_host is called,the scsi mid layer is sending some request. This doesn't occur for bare drives becuase the driver is already reporting those drives deleted prior to calling mpt2sas_base_detach. To solve this issue, we need to delete the volumes as well. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by: Eric Moore <eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: add missing initialization of scsih_cmdsKashyap, Desai2009-12-101-0/+5
| | | | | | | | Internal command scsih_cmds init is included in mpt2sas_base_attach. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* Merge branch 'for-linus' of ↵Linus Torvalds2009-12-091-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
| * tree-wide: fix assorted typos all over the placeAndré Goddard Rosa2009-12-041-1/+1
| | | | | | | | | | | | | | | | | | | | That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | [SCSI] modify change_queue_depth to take in reason why it is being calledMike Christie2009-12-041-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch modifies scsi_host_template->change_queue_depth so that it takes an argument indicating why it is being called. This will be used so that if a LLD needs to do some extra processing when handling queue fulls or later ramp ups, it can do so. This is a simple port of the drivers setting a change_queue_depth callback. In the patch I just have these LLDs adjust the queue depth if the user was requesting it. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> [Vasu.Dev: v2 Also converted pmcraid_change_queue_depth and then verified all modules compile using "make allmodconfig" for any new build warnings on X86_64. Updated original description after combing two original patches from Mike to make this patch git bisectable.] Signed-off-by: Vasu Dev <vasu.dev@intel.com> [jejb: fixed up 53c700] Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas: Bump version 03.100.03.00Kashyap, Desai2009-10-291-2/+2
| | | | | | | | | | | | | | | | Bump version to 03.100.03.00 Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas: No link rate change, do not call update links nor unblock deviceKashyap, Desai2009-10-291-25/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (1) target resets are sending link change rate events with no link rate change -> thus said the driver was modified so when there is no link rate change, we don't need to call mpt2sas_transport_update_links nor _scsih_ublock_io_device. (2) There were changes made in _scsih_sas_topology_change_event_debug to change the debug strings so they are more clear. Also the link rate change information was added to display the new and previous link rate. for the MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST event when the ExpStatus is set to zero, display "responding" instead of "unknown status". Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas : Add support for RAID Action System Shutdown Initiated at OS ↵Kashyap, Desai2009-10-292-1/+136
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | shutdown (1) Added new function _scsih_ir_shutdown. This function will issue the MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED request via MPI2_FUNCTION_RAID_ACTION. The function will wait 10 seconds for reply message frame, then print out the ioc status and loginfo. This function is only called when there are raid volumes present. (2) Add shutdown callback in the struct pci_driver object scsih_driver. This will be called only when the system is shutting down. From this function, we will call _scsih_ir_shutdown mentioned above. (3) Add support in _scsih_remove to call _scsih_ir_shutdown. The function _scsih_remove will be called when the driver is unloaded (and system is still running). scsih internal command contex is added to send internal message frames from mpt2sas_scsih.c. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas: Freeze the sdev IO queue when firmware sends internal dev resetKashyap, Desai2009-10-291-1/+33
| | | | | | | | | | | | | | | | | | | | | | | | When receiving the MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET event, the driver will set the tm_busy flag in the sdev private host data, When tm_busy flag is set, the driver will return SCSI_MLQUEUE_DEVICE_BUSY, effectly freezing the IO to the device. The tm_busy flag is cleared with the MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET event. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas : PPC (power pc) endian bug fix'sKashyap, Desai2009-10-294-22/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (1) EEDP(End to End data protection) was not working. This was due to not setting EEDP BlockSize and Flags to little endian format in the message frame. (2) Some expander sysfs attributes were not getting set properly. The sas format was not getting set due to endian issues with sas_format field in the struct rep_manu_reply. Since sas_format was not set properly, the component_vendor_id, component_revision_id, and component_id were not set. (3) In _transport_smp_handler: we don't need to convert the smid from little endian to cpu prior to calling mpt2sas_base_free_smid, because its allready in cpu format. (4) Some loginfos and ioc status were not xonverted from little endian to cpu. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas: mpt2sas_base_get_sense_buffer_dma should be returning little ↵Kashyap, Desai2009-10-294-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | endian cpu_to_le64 when calculating the physical dma address. This will properly handle endianess on big endian systems. The return value of this function was changed from dma_addr_t to __le64. Remove the typecasting of u32 when setting the SenseBufferLowAddress, since its already in __le32 format. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas: Return DID_TRANSPORT_DISRUPTED in nexus ↵Kashyap, Desai2009-10-291-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | loss,SCSI_MLQUEUE_DEVICE_BUSY if device is busy 1 Its observed that the OS was sending request to the driver after it had been put into blocking state, so the driver was modified to return SCSI_MLQUEUE_DEVICE_BUSY. 2. Driver will return DID_TRANSPORT_DISRUPTED when sdev is haivng nexus loss. This occurrs when sdev is blocked, between the MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING and MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING events. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas: Retrieve the ioc facts prior to putting the controller into ↵Kashyap, Desai2009-10-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | READY state The driver needs to retrieve the ioc facts prior to putting the controller into READY state. The current design is calling ioc facts after putting the controller into READY state, which means the driver is sending a diag reset instead of message unit reset becuase the capability information is not yet available. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas: Added new info messages for IR and Expander events.Kashyap, Desai2009-10-291-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | (1) for the MPI2_EVENT_IR_OPERATION_STATUS event, add support to print "background init" or "make data consistent" for debugging purposes. If the RAIDOperation is set to a value not defined, then don't print anything (2) for the MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE event, add support to print "expander reduced functionality" and "expander reduced functionality complete", which are new events. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas: Limit the max_depth to 32 for SATA devices which are not ↵Kashyap, Desai2009-10-291-0/+25
| | | | | | | | | | | | | | | | | | | | | | part of volume Added sanity check in _scsih_change_queue_depth to limit the max_depth to 32 for SATA devices. This is only for physical devices not part of a volume. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas: Added support to set the TimeStamp when sending ioc_initKashyap, Desai2009-10-291-0/+9
| | | | | | | | | | | | | | Added support to set the TimeStamp when sending ioc_init. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas: Add Extended Type for Diagnostic Buffer supportKashyap, Desai2009-10-293-8/+29
| | | | | | | | | | | | | | | | | | | | | | Added tests for registry entries of EXBuffSize, EXImmed, and EXType to support the new Extended diag buffer type. Modified code where necessary to handle the new ExtendedType field in the F/W diagnostic Post and Release messages. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas: Added command line option diag_buffer_enable.Kashyap, Desai2009-10-293-37/+104
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added command line option diag_buffer_enable. When the command line option is set, the driver will automatically post diag buffers at driver load time. The command line option diag_buffer_enable is bitwise, so it's possible to enable both and/or snapshot + trace buffers. For trace, the driver will allocate 1MB buffer, whereas for snapshot its 2MB. The purpose for this is so the enduser doesn't have to manually use an application to setup diag buffers for debugging firmware related issues. Here is some examples trace: # insmod mpt2sas.ko diag_buffer_enable=1 snapshot: # insmod mpt2sas.ko diag_buffer_enable=2 both trace and snapshot: # insmod mpt2sas.ko diag_buffer_enable=3 Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas: Fixed some of the commentKashyap, Desai2009-10-291-10/+10
| | | | | | | | | | | | | | | | | | Fixed some of the comments sections for some of the function so "@ioc: pointer to scsi command object" was changed to "@ioc: per adapter object" Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas: Support for stopping driver when Firmware encountersKashyap, Desai2009-10-294-16/+119
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added command line option and shost sysfs attribute called mpt2sas_fwfault_debug. When enduser writes a "1" to this parameter, this will enable support in the driver for debugging firmware timeout related issues. This handling was added in three areas (a) scsi error handling callback called task_abort, (b) IOCTL interface, and (c) other timeouts that result in diag resets, such as manufacturing config pages. When this support is enabled, the driver will provide dump_stack to console, halt controller firmware, and panic driver. The end user probably would want to setup serial console redirection so the dump stack can be seen. Here are the three methods for enable this support: (a) # insmod mpt2sas.ko mpt2sas_fwfault_debug=1 (b) # echo 1 > /sys/module/mpt2sas/parameters/mpt2sas_fwfault_debug (c) # echo 1 > /sys/class/scsi_host/host#/fwfault_debug (where # is the host number) Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas: Adding MPI Headers - revision LKashyap, Desai2009-10-295-14/+305
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new headers contain the following changes: (1) Added IO Unit Page 7. (2) Added new device ids for SAS2208. (3) Added SAS IO Unit Page 5. (4) Added partial and slumber power management capable flags to SAS Device Page 0 Flags field. (5) Added PhyInfo defines for power condition. (6) Added Ethernet configuration pages. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas: New device SAS2208 support is addedKashyap, Desai2009-10-292-0/+26
| | | | | | | | | | | | | | | | | | Added device ids range for { 0x80 - 87 } , modified mpi/mpi2_cnfg.h containing MPI2_MFGPAGE_DEVID_SAS2208_X. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas: Add support in the driver to check for valid response infoKashyap, Desai2009-10-291-13/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | Add support in the driver to check for valid response info in the scsi state, then check to see if the response code is MPI2_SCSITASKMGMT_RSP_INVALID_FRAME; when this condition occurrs, the driver will return DID_SOFT_ERROR. A return code of DID_SOFT_ERROR will result in a retry at the scsi-mid layer level. An additional change added to obtain the response code from the 1st byte of the response info instead of last. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas: Expander remove fails when it is processing another expander ↵Kashyap, Desai2009-10-291-47/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add. This handles the case where driver receives a expander removal event while it is in the middle of processing an expander add event. The existing implementation will stop processing futher device adds when a expander delete arrives on top of add expander add. Due to a sanity check in the driver, the devices there were not added, were never handshaked to firmware with the device removal handshake protocal. Since the driver didnt' do the handshake, the controller never provide further add events. To fix this issue, the sanity check was removed so the driver will always do the device removal handshake protocal. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] mpt2sas: Driver will use sas address instead of handle as a lookupKashyap, Desai2009-10-293-210/+255
|/ | | | | | | | | | | | | | | | | The device driver was not handling updating device handles in all cases across diag resets. To fix this issue, the driver is converted to using sas address instead of handle as a lookup reference to the parent expander or sas_host. Also, for both expanders and sas host, the phy handle will be one unique handle. In the sas host case, the phy handle can be different for every phy, so the change is to set the handle to the handle of the first phy; every phy will be one single sas address(phy 0) instead of a different sas address for every phy(previous implementation). So making one consistent sas address for all the direct attachedports to the sas host, will make it better user experience when using udev /dev/disk/by-path dev nodes Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Bump version 02.100.03.00Kashyap, Desai2009-10-021-3/+3
| | | | | | | Bump version to 02.100.03.00 Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Support dev remove when phy status is ↵Kashyap, Desai2009-10-021-5/+6
| | | | | | | | | | MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT Add support to process device removal events when the phy status is set to MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Timeout occurred within the HANDSHAKE logic while waiting on ↵Kashyap, Desai2009-10-021-3/+1
| | | | | | | | | | | | | | | | firmware to ACK. Following a diag_reset, a request to send an ioc_init is timing out. The timeout occurred within the HANDSHAKE logic while waiting on firmware to acknowledge that the driver had wrote to the doorbell register. This was root caused to a logic timeout in the firmware code. The proposed solution is for the driver to call the udelay instead of msleep API in function where its looping reading the interrupt status. In addition to this change, there were two additional cases where we deleted the clearing interrupt status outside handshake context. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Call init_completion on a per request basis.Kashyap, Desai2009-10-023-3/+10
| | | | | | | | | | | | Now driver call init_completion on a per request basis. At some point the wait_for_completion_timeout is not waiting for the timeout, instead returning immediately, thus going into diag reset. This fix will address all request using the wait_for_completion_timeout API. The previous implimentation was only calling init_completion at driver load time. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Target Reset will be issued from Interrupt context.Kashyap, Desai2009-10-026-54/+372
| | | | | | | | | | | | | | | | | | (1) Added three new functions to handle sending target resest and OP_REMOVE from interrupt time, they are _scsih_tm_tr_send, _scsih_tm_tr_complete, and _scsih_sas_control_complete. This code will create a link list of pending target resets if there is no more available request in the hipriority request queue. The list is stored in ioc->delayed_tr_list. (2) All callback handler return type is changed from void to u8. Now _base_interrupt will check for return type of callback handlers to take decision of message frame is already freed or not. In genral, Return 1 meaning mf should be freed from _base_interrupt 0 means the mf is freed from function. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Added SCSIIO, Internal and high priority memory pools to ↵Kashyap, Desai2009-10-024-137/+307
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | support multiple TM 1) create a pool of high priority message frames in the region of memory between message frames and chains. The modifications are in _base_allocate_memory_pools. Also create a seperate pool of memory for internal commands located near the same region of memory. The pool of high priority message frames is restriced by the facts->HighPriorityCredit. 2) Create additional API for accessing request message frames. New function mpt2sas_base_get_smid_hpr is for highpriority request. New function mpt2sas_base_get_smid_scsiio for SCSI_IO, passing in the scsi command pointer. The mpt2sas_base_get_smid function is for requesting internal commands. 3) Added new function _base_get_cb_idx to obtain the callback index from one of the three pools of request message frames. 4) Removed wrapper functions _scsih_scsi_lookup_set and _scsih_scsi_lookup_getclear. These were removed because this handling was moved into mpt2sas_base_get_smid_scsiio and mpt2sas_base_free_smid. 5) The function mpt2sas_base_free_smid is modified so the request message frames are put back on one of the three pools of request message frames. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Copyright change to 2009.Kashyap, Desai2009-10-029-9/+9
| | | | | | | Update the copyright year to 2009 through out the code. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Added mpi2_history.txt for MPI2 headers.Kashyap, Desai2009-10-021-0/+334
| | | | | | | Added new file for MPI2 header version history. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Update driver to MPI2 REV K headers.Kashyap, Desai2009-10-0211-207/+652
| | | | | | | | | Drivers header are updated to the MPI2 REV K headers. Renamed VF_ID to msix_index in all call back handlers. VF_ID is removed from all request descriptor. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Bump driver version 01.100.06.00Kashyap, Desai2009-09-051-2/+2
| | | | | | | | Bump version to 01.100.06.00 Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by:: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: cleanup interrupt routine and config_request optimizationKashyap, Desai2009-09-054-753/+234
| | | | | | | | | | | Cleaned up base_interrupt routine to be more effiecent. Deleted about a third of the config page API by moving redundant code from all the calling functions to _config_request. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Raid 10 Volume is showing as Raid 1E in dmesgKashyap, Desai2009-09-054-4/+109
| | | | | | | | | | | | | | | This patch modifies the slave_configure callback so the messages that get sent to system log for RAID1E volumes contain the string "RAID10" instead of "RAID1E". These messages contain information regarding what kind of scsi device is being added. Certain OEMS can enable displaying the RAID10 string instead of RAID1E via manufacturing page 10. The driver will read this config page at driver load time, then determine from the GenericFlags0 bits whether display the RAID10 or RAID1E string, also even drive count is taken into consideration. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by: Eric Moore <Eric.moore@lsi.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: setting SDEV into RUNNING state from Interrupt contextKashyap, Desai2009-09-052-6/+13
| | | | | | | | | | | | | | | | Changing SDEV Running state from interrupt context. Previously It was handle in work queue thread. With this change It will not wait for work queue thread to execute scsih_ublock_io_device to put SDEV into Running state. This will reduce delay for Device becoming RUNNING. Modified this patch considering James comment "Not to change SDEV state using scsi_device_set_state API, instead use scsi_internal_device_unblock scsi_internal_device_block API" Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by: Eric Moore <Eric.moore@lsi.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Removed wrapper funtions _scsih_link_change.Kashyap, Desai2009-09-053-33/+17
| | | | | | | | | | | | Deleted the wrapper function called _scsih_link_change. This function was implemented for compatibility reasons only, between different kernel versions. Currently this function is no longer needed. The calling function are converted to calling mpt2sas_transport_update_phy_link_change directly in the transport layer. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mpt2sas: Prevent sending command to FW while Host ResetKashyap, Desai2009-09-055-54/+47
| | | | | | | | | | | | | | | This patch renames the flag for indicating host reset from ioc_reset_in_progress to shost_recovery. It also removes the spin locks surrounding the setting of this flag, which are unnecessary. Sanity checks on the shost_recovery flag were added thru out the code so as to prevent sending firmware commands during host reset. Also, the setting of the shost state to SHOST_RECOVERY was removed to prevent deadlocks, this is actually better handled by the shost_recovery flag. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by: Eric Moore <Eric.moore@lsi.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
OpenPOWER on IntegriCloud