summaryrefslogtreecommitdiffstats
path: root/drivers/pci/probe.c
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] PCI: kzalloc() conversion in drivers/pciEric Sesterhenn2006-03-231-6/+3
| | | | | | | | this patch converts drivers/pci to kzalloc usage. Compile tested with allyes config. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: PCI/Cardbus cards hidden, needs pci=assign-busses to fixBernhard Kaindl2006-03-231-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "In some cases, especially on modern laptops with a lot of PCI and cardbus bridges, we're unable to assign correct secondary/subordinate bus numbers to all cardbus bridges due to BIOS limitations unless we are using "pci=assign-busses" boot option." -- Ivan Kokshaysky (from a patch comment) Without it, Cardbus cards inserted are never seen by PCI because the parent PCI-PCI Bridge of the Cardbus bridge will not pass and translate Type 1 PCI configuration cycles correctly and the system will fail to find and initialise the PCI devices in the system. Reference: PCI-PCI Bridges: PCI Configuration Cycles and PCI Bus Numbering: http://www.science.unitn.it/~fiorella/guidelinux/tlk/node72.html The reason for this is that: ``All PCI busses located behind a PCI-PCI bridge must reside between the secondary bus number and the subordinate bus number (inclusive).'' "pci=assign-busses" makes pcibios_assign_all_busses return 1 and this turns on PCI renumbering during PCI probing. Alan suggested to use DMI automatically set assign-busses on problem systems. The only question for me was where to put it. I put it directly before scanning PCI bus into pcibios_scan_root() because it's called from legacy, acpi and numa and so it can be one place for all systems and configurations which may need it. AMD64 Laptops are also affected and fixed by assign-busses, and the code is also incuded from arch/x86_64/pci/ that place will also work for x86_64 kernels, I only ifdef'-ed the x86-only Laptop in this example. Affected and known or assumed to be fixed with it are (found by googling): * ASUS Z71V and L3s * Samsung X20 * Compaq R3140us and all Compaq R3000 series laptops with TI1620 Controller, also Compaq R4000 series (from a kernel.org bugreport) * HP zv5000z (AMD64 3700+, known that fixup_parent_subordinate_busnr fixes it) * HP zv5200z * IBM ThinkPad 240 * An IBM ThinkPad (1.8 GHz Pentium M) debugged by Pavel Machek gives the correspondig message which detects the possible problem. * MSI S260 / Medion SIM 2100 MD 95600 The patch also expands the "try pci=assign-busses" warning so testers will help us to update the DMI table. Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: make MSI quirk inheritable from the pci busMichael S. Tsirkin2006-03-231-0/+1
| | | | | | | | It turns out AMD 8131 quirk only affects MSI for devices behind the 8131 bridge. Handle this by adding a flags field in pci_bus, inherited from parent to child. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: Avoid leaving MASTER_ABORT disabled permanently when returning ↵Ralf Baechle2006-03-231-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | from pci_scan_bridge. > On Mon, Feb 13, 2006 at 05:13:21PM -0800, David S. Miller wrote: > > > > In drivers/pci/probe.c:pci_scan_bridge(), if this is not the first > > pass (pass != 0) we don't restore the PCI_BRIDGE_CONTROL_REGISTER and > > thus leave PCI_BRIDGE_CTL_MASTER_ABORT off: > > > > int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass) > > { > > ... > > /* Disable MasterAbortMode during probing to avoid reporting > > of bus errors (in some architectures) */ > > pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl); > > pci_write_config_word(dev, PCI_BRIDGE_CONTROL, > > bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT); > > ... > > if ((buses & 0xffff00) && !pcibios_assign_all_busses() && !is_cardbus) { > > unsigned int cmax, busnr; > > /* > > * Bus already configured by firmware, process it in the first > > * pass and just note the configuration. > > */ > > if (pass) > > return max; > > ... > > } > > > > pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl); > > ... > > > > This doesn't seem intentional. Agreed, looks like an accident. The patch [1] originally came from Kip Walker (Broadcom back then) between 2.6.0-test3 and 2.6.0-test4. As I recall it was supposed to fix an issue with with PCI aborts being signalled by the PCI bridge of the Broadcom BCM1250 family of SOCs when probing behind pci_scan_bridge. It is undeseriable to disable PCI_BRIDGE_CTL_MASTER_ABORT in pci_{read,write)_config_* and the behaviour wasn't considered a bug in need of a workaround, so this was put in probe.c. I don't have an affected system at hand, so can't really test but I propose something like the below patch. [1] http://www.linux-mips.org/git?p=linux.git;a=commit;h=599457e0cb702a31a3247ea6a5d9c6c99c4cf195 [PCI] Avoid leaving MASTER_ABORT disabled permanently when returning from pci_scan_bridge. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: really fix parent's subordinate busnrKristen Accardi2006-03-231-0/+5
| | | | | | | | | After you find the maximum value of the subordinate buses below the child bus, you must fix the parent's subordinate bus number again, otherwise it may be too small. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: Export pci_cfg_space_sizeBenjamin Herrenschmidt2006-01-091-1/+1
| | | | | | | | | | The powerpc PCI code sets up the PCI tree without doing config space accesses in most cases, from the firmware tree. However, it still wants to call pci_cfg_space_size() under some conditions, thus it needs to be made non-static (though I don't see a point to export it to modules). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: use bus numbers sparsely, if necessaryDominik Brodowski2006-01-091-2/+37
| | | | | | | | | | | | | Add a warning if a child bus may be inaccessible because the parent bridge has wrong secondary or subordinate bus numbers. Note that this may or may not happen on "transparent" bridges, as can be seen in bug #5557. Also, if we do not fix up the assignment of bus numbers, try to make use of the bus number space available. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI Quirk: 1K I/O space granularity on Intel P64H2Daniel Yeisley2006-01-091-2/+4
| | | | | | | | | | | | | I've implemented a quirk to take advantage of the 1KB I/O space granularity option on the Intel P64H2 PCI Bridge. I had to change probe.c because it sets the resource start and end to be aligned on 4k boundaries (after the quirk sets them to 1k boundaries). I've tested this patch on a Unisys ES7000-600 both with and without the 1KB option enabled. I also tested this on a 2 processor Dell box that doesn't have a P64H2 to make sure there were no negative affects there. Signed-off-by: Dan Yeisley <dan.yeisley@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] pci: call pci_read_irq for bridgesKristen Accardi2006-01-091-0/+1
| | | | | | | | Call pci_read_irq() for bridges too, so that the pin value is stored for bridges that require interrupts. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] pci: store PCI_INTERRUPT_PIN in pci_devKristen Accardi2006-01-091-0/+1
| | | | | | | | Store the value of the INTERRUPT_PIN in the pci_dev structure so that it can be retrieved later. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] kernel-doc: PCI fixesRandy Dunlap2005-10-281-0/+1
| | | | | | | | PCI: add descriptions for missing function parameters. Eliminate all kernel-doc warnings here. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] pci: fixup parent subordinate busnrIvan Kokshaysky2005-09-231-1/+17
| | | | | | | | | | | | | | | | | I believe the change that broke things is introduction of pci_fixup_parent_subordinate_busnr(). The patch here does two things: - hunk #1 should fix the problems you've seen when you boot without additional "pci" kernel options; - hunk #2 supposedly fixes boot with "pci=assign-busses" option which otherwise hangs Acer TM81xx machines as reported. Please try this with and without "pci=assign-busses". If it boots, I'd like to see 'lspci -vvx' for both cases. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fix drivers/pci/probe.c warningAmos Waterland2005-09-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This function expects an unsigned 32-bit type as its third argument: static u32 pci_size(u32 base, u32 maxbase, u32 mask) However, given these definitions: #define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL) #define PCI_ROM_ADDRESS_MASK (~0x7ffUL) these two calls in drivers/pci/probe.c are problematic for architectures for which a UL is not equivalent to a u32: sz = pci_size(l, sz, PCI_BASE_ADDRESS_MEM_MASK); sz = pci_size(l, sz, PCI_ROM_ADDRESS_MASK); Hence the below compile warning when building for ARCH=ppc64: drivers/pci/probe.c: In function `pci_read_bases': /.../probe.c:168: warning: large integer implicitly truncated to unsigned type /.../probe.c:218: warning: large integer implicitly truncated to unsigned type Here is a simple fix. Signed-off-by: Amos Waterland <apw@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Subject: PATCH: fix numa caused compile warningsAlan Cox2005-09-101-2/+4
| | | | | | | | | pcibus_to_cpumask expands into more than just an initialiser so gcc moans about code before variable declarations. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] PCI: Small rearrangement of PCI probing codePaul Mackerras2005-09-091-17/+33
| | | | | | | | | | | | This patch makes some small rearrangements of the PCI probing code in order to make it possible for arch code to set up the PCI tree without needing to duplicate code from the PCI layer unnecessarily. PPC64 will use this to set up the PCI tree from the Open Firmware device tree, which we need to do on logically-partitioned pSeries systems. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: Support PCM PM CAP version 3Daniel Ritz2005-09-081-1/+1
| | | | | | | | | | | | | - support PCI PM CAP version 3 (as defined in PCI PM Interface Spec v1.2) - pci/probe.c sets the PM state initially to 4 which is D3cold. add a PCI_UNKNOWN - minor cleanups Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: remove CONFIG_PCI_NAMESAdrian Bunk2005-09-081-2/+0
| | | | | | | This patch removes CONFIG_PCI_NAMES. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: remove PCI_BRIDGE_CTL_VGA handling from setup-bus.cIvan Kokshaysky2005-07-291-1/+1
| | | | | | | | | | | | | | | | | | The setup-bus code doesn't work correctly for configurations with more than one display adapter in the same PCI domain. This stuff actually is a leftover of an early 2.4 PCI setup code and apparently it stopped working after some "bridge_ctl" changes. So the best thing we can do is just to remove it and rely on the fact that any firmware *has* to configure VGA port forwarding for the boot display device properly. But then we need to ensure that the bus->bridge_ctl will always contain valid information collected at the probe time, therefore the following change in pci_scan_bridge() is needed. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] PCI: handle subtractive decode pci-pci bridge betterIvan Kokshaysky2005-07-011-3/+2
| | | | | | | | | | | | | | | | | | | With the number of PCI bus resources increased to 8, we can handle the subtractive decode PCI-PCI bridge like a normal bridge, taking into account standard PCI-PCI bridge windows (resources 0-2). This helps to avoid problems with peer-to-peer DMA behind such bridges, poor performance for MMIO ranges outside bridge windows and prefetchable vs. non-prefetchable memory issues. To reflect the fact that such bridges do forward all addresses to the secondary bus (transparency), remaining bus resources 3-7 are linked to resources 0-4 of the primary bus. These resources will be used as fallback by resource management code if allocation from standard bridge windows fails for some reason. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: Fix up PCI routing in parent bridgeGreg Kroah-Hartman2005-07-011-1/+18
| | | | | | | | | When the cardbus bridge is behind another bridge change the routing in the parent bridge for new cards. This fixes Cardbus on various AMD64 laptops. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] acpi bridge hotadd: Link newly created pci child bus to its parent ↵Rajesh Shah2005-06-271-2/+2
| | | | | | | | | | | | | | on creation When a pci child bus is created, add it to the parent's children list immediately rather than waiting till pci_bus_add_devices(). For hot-plug bridges/devices, pci_bus_add_devices() may be called much later, after they have been properly configured. In the meantime, this allows us to use the normal pci bus search functions for the hot-plug bridges/buses. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] acpi bridge hotadd: Take the PCI lock when modifying pci bus or ↵Rajesh Shah2005-06-271-1/+10
| | | | | | | | | | | | device lists With root bridge and pci bridge hot-plug, new buses and devices can be added or removed at run time. Protect the pci bus and device lists with the pci lock when doing so. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] acpi bridge hotadd: Prevent duplicate bus numbers when scanning PCI ↵Rajesh Shah2005-06-271-2/+10
| | | | | | | | | | | | | bridge When hot-plugging a root bridge, as we try to assign bus numbers we may find that the hotplugged hieratchy has more PCI to PCI bridges (i.e. bus requirements) than available. Make sure we don't step over an existing bus when that happens. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] acpi bridge hotadd: ACPI based root bridge hot-addRajesh Shah2005-06-271-2/+0
| | | | | | | | | | | | | | | | | | | When you hot-plug a (root) bridge hierarchy, it may have p2p bridges and devices attached to it that have not been configured by firmware. In this case, we need to configure the devices before starting them. This patch separates device start from device scan so that we can introduce the configuration step in the middle. I kept the existing semantics for pci_scan_bus() since there are a huge number of callers to that function. Also, I have no way of testing the changes I made to the parisc files, so this needs review by those folks. Sorry for the massive cross-post, this touches files in many different places. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] Fix PCI BAR size interpretation on 64-bit archesOlof Johansson2005-06-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | On 64-bit machines, PCI_BASE_ADDRESS_MEM_MASK and other mask constants passed to pci_size() are 64-bit (for example ~0x0fUL). However, pci_size does comparisons between the u32 arguments and the mask, which will fail even though any result from pci_size is still just 32-bit. Changing the mask argument to u32 seems the obvious thing to do, since all arithmetic in the function is 32-bit and having a larger mask makes no sense. This triggered on a PPC64 system here where an adapter (VGA, as it happened) had a memory region base of 0xfe000000 and a sz of the same, matching the if (max == maxbase ...) test at the bottom of pci_size but failing the mask comparison. Quite a corner case which I guess explains why we haven't seen it until now. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] PCI: Clean up a lot of sparse "Should it be static?" warnings.Greg KH2005-05-031-0/+1
| | | | Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-161-0/+939
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud