summaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* net/ibm/emac: wrong bit is used for STA control register writeIvan Mikhaylov2018-03-021-1/+1
| | | | | | | | | | | | | | | STA control register has areas of mode and opcodes for opeations. 18 bit is using for mode selection, where 0 is old MIO/MDIO access method and 1 is indirect access mode. 19-20 bits are using for setting up read/write operation(STA opcodes). In current state 'read' is set into old MIO/MDIO mode with 19 bit and write operation is set into 18 bit which is mode selection, not a write operation. To correlate write with read we set it into 20 bit. All those bit operations are MSB 0 based. Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> (cherry picked from commit 624ca9c33c8a853a4a589836e310d776620f4ab9) Signed-off-by: Joel Stanley <joel@jms.id.au>
* net/ibm/emac: add 8192 rx/tx fifo sizeIvan Mikhaylov2018-03-022-0/+8
| | | | | | | | | | | emac4syn chips has availability to use 8192 rx/tx fifo buffer sizes, in current state if we set it up in dts 8192 as example, we will get only 2048 which may impact on network speed. Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> (cherry picked from commit 45d6e545505fd32edb812f085be7de45b6a5c0af) Signed-off-by: Joel Stanley <joel@jms.id.au>
* Merge tag 'v4.13.16' into dev-4.13Joel Stanley2017-11-2845-305/+480
|\ | | | | | | This is the 4.13.16 stable release
| * fealnx: Fix building error on MIPSHuacai Chen2017-11-241-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit cc54c1d32e6a4bb3f116721abf900513173e4d02 ] This patch try to fix the building error on MIPS. The reason is MIPS has already defined the LONG macro, which conflicts with the LONG enum in drivers/net/ethernet/fealnx.c. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * net: cdc_ncm: GetNtbFormat endian fixBjørn Mork2017-11-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 6314dab4b8fb8493d810e175cb340376052c69b6 ] The GetNtbFormat and SetNtbFormat requests operate on 16 bit little endian values. We get away with ignoring this most of the time, because we only care about USB_CDC_NCM_NTB16_FORMAT which is 0x0000. This fails for USB_CDC_NCM_NTB32_FORMAT. Fix comparison between LE value from device and constant by converting the constant to LE. Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Fixes: 2b02c20ce0c2 ("cdc_ncm: Set NTB format again after altsetting switch for Huawei devices") Cc: Enrico Mioso <mrkiko.rs@gmail.com> Cc: Christian Panton <christian@panton.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-By: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * vxlan: fix the issue that neigh proxy blocks all icmpv6 packetsXin Long2017-11-241-18/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 8bff3685a4bbf175a96bc6a528f13455d8d38244 ] Commit f1fb08f6337c ("vxlan: fix ND proxy when skb doesn't have transport header offset") removed icmp6_code and icmp6_type check before calling neigh_reduce when doing neigh proxy. It means all icmpv6 packets would be blocked by this, not only ns packet. In Jianlin's env, even ping6 couldn't work through it. This patch is to bring the icmp6_code and icmp6_type check back and also removed the same check from neigh_reduce(). Fixes: f1fb08f6337c ("vxlan: fix ND proxy when skb doesn't have transport header offset") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Vincent Bernat <vincent@bernat.im> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * net/mlx5e: Set page to null in case dma mapping failsInbar Karmy2017-11-241-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 2e50b2619538ea0224c037f6fa746023089e0654 ] Currently, when dma mapping fails, put_page is called, but the page is not set to null. Later, in the page_reuse treatment in mlx5e_free_rx_descs(), mlx5e_page_release() is called for the second time, improperly doing dma_unmap (for a non-mapped address) and an extra put_page. Prevent this by nullifying the page pointer when dma_map fails. Fixes: accd58833237 ("net/mlx5e: Introduce RX Page-Reuse") Signed-off-by: Inbar Karmy <inbark@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * net/mlx5: Cancel health poll before sending panic teardown commandHuy Nguyen2017-11-241-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit d2aa060d40fa060e963f9a356d43481e43ba3dac ] After the panic teardown firmware command, health_care detects the error in PCI bus and calls the mlx5_pci_err_detected. This health_care flow is no longer needed because the panic teardown firmware command will bring down the PCI bus communication with the HCA. The solution is to cancel the health care timer and its pending workqueue request before sending panic teardown firmware command. Kernel trace: mlx5_core 0033:01:00.0: Shutdown was called mlx5_core 0033:01:00.0: health_care:154:(pid 9304): handling bad device here mlx5_core 0033:01:00.0: mlx5_handle_bad_state:114:(pid 9304): NIC state 1 mlx5_core 0033:01:00.0: mlx5_pci_err_detected was called mlx5_core 0033:01:00.0: mlx5_enter_error_state:96:(pid 9304): start mlx5_3:mlx5_ib_event:3061:(pid 9304): warning: event on port 0 mlx5_core 0033:01:00.0: mlx5_enter_error_state:104:(pid 9304): end Unable to handle kernel paging request for data at address 0x0000003f Faulting instruction address: 0xc0080000434b8c80 Fixes: 8812c24d28f4 ('net/mlx5: Add fast unload support in shutdown flow') Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * net: usb: asix: fill null-ptr-deref in asix_suspendAndrey Konovalov2017-11-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 8f5624629105589bcc23d0e51cc01bd8103d09a5 ] When asix_suspend() is called dev->driver_priv might not have been assigned a value, so we need to check that it's not NULL. Similar issue is present in asix_resume(), this patch fixes it as well. Found by syzkaller. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN Modules linked in: CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc4-43422-geccacdd69a8c #400 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event task: ffff88006bb36300 task.stack: ffff88006bba8000 RIP: 0010:asix_suspend+0x76/0xc0 drivers/net/usb/asix_devices.c:629 RSP: 0018:ffff88006bbae718 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff880061ba3b80 RCX: 1ffff1000c34d644 RDX: 0000000000000001 RSI: 0000000000000402 RDI: 0000000000000008 RBP: ffff88006bbae738 R08: 1ffff1000d775cad R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800630a8b40 R13: 0000000000000000 R14: 0000000000000402 R15: ffff880061ba3b80 FS: 0000000000000000(0000) GS:ffff88006c600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff33cf89000 CR3: 0000000061c0a000 CR4: 00000000000006f0 Call Trace: usb_suspend_interface drivers/usb/core/driver.c:1209 usb_suspend_both+0x27f/0x7e0 drivers/usb/core/driver.c:1314 usb_runtime_suspend+0x41/0x120 drivers/usb/core/driver.c:1852 __rpm_callback+0x339/0xb60 drivers/base/power/runtime.c:334 rpm_callback+0x106/0x220 drivers/base/power/runtime.c:461 rpm_suspend+0x465/0x1980 drivers/base/power/runtime.c:596 __pm_runtime_suspend+0x11e/0x230 drivers/base/power/runtime.c:1009 pm_runtime_put_sync_autosuspend ./include/linux/pm_runtime.h:251 usb_new_device+0xa37/0x1020 drivers/usb/core/hub.c:2487 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Code: 8d 7c 24 20 48 89 fa 48 c1 ea 03 80 3c 02 00 75 5b 48 b8 00 00 00 00 00 fc ff df 4d 8b 6c 24 20 49 8d 7d 08 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 34 4d 8b 6d 08 4d 85 ed 74 0b e8 26 2b 51 fd 4c RIP: asix_suspend+0x76/0xc0 RSP: ffff88006bbae718 ---[ end trace dfc4f5649284342c ]--- Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * qmi_wwan: Add missing skb_reset_mac_header-callKristian Evensen2017-11-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 0de0add10e587effa880c741c9413c874f16be91 ] When we receive a packet on a QMI device in raw IP mode, we should call skb_reset_mac_header() to ensure that skb->mac_header contains a valid offset in the packet. While it shouldn't really matter, the packets have no MAC header and the interface is configured as-such, it seems certain parts of the network stack expects a "good" value in skb->mac_header. Without the skb_reset_mac_header() call added in this patch, for example shaping traffic (using tc) triggers the following oops on the first received packet: [ 303.642957] skbuff: skb_under_panic: text:8f137918 len:177 put:67 head:8e4b0f00 data:8e4b0eff tail:0x8e4b0fb0 end:0x8e4b1520 dev:wwan0 [ 303.655045] Kernel bug detected[#1]: [ 303.658622] CPU: 1 PID: 1002 Comm: logd Not tainted 4.9.58 #0 [ 303.664339] task: 8fdf05e0 task.stack: 8f15c000 [ 303.668844] $ 0 : 00000000 00000001 0000007a 00000000 [ 303.674062] $ 4 : 8149a2fc 8149a2fc 8149ce20 00000000 [ 303.679284] $ 8 : 00000030 3878303a 31623465 20303235 [ 303.684510] $12 : ded731e3 2626a277 00000000 03bd0000 [ 303.689747] $16 : 8ef62b40 00000043 8f137918 804db5fc [ 303.694978] $20 : 00000001 00000004 8fc13800 00000003 [ 303.700215] $24 : 00000001 8024ab10 [ 303.705442] $28 : 8f15c000 8fc19cf0 00000043 802cc920 [ 303.710664] Hi : 00000000 [ 303.713533] Lo : 74e58000 [ 303.716436] epc : 802cc920 skb_panic+0x58/0x5c [ 303.721046] ra : 802cc920 skb_panic+0x58/0x5c [ 303.725639] Status: 11007c03 KERNEL EXL IE [ 303.729823] Cause : 50800024 (ExcCode 09) [ 303.733817] PrId : 0001992f (MIPS 1004Kc) [ 303.737892] Modules linked in: rt2800pci rt2800mmio rt2800lib qcserial ppp_async option usb_wwan rt2x00pci rt2x00mmio rt2x00lib rndis_host qmi_wwan ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 mt76x2i Process logd (pid: 1002, threadinfo=8f15c000, task=8fdf05e0, tls=77b3eee4) [ 303.962509] Stack : 00000000 80408990 8f137918 000000b1 00000043 8e4b0f00 8e4b0eff 8e4b0fb0 [ 303.970871] 8e4b1520 8fec1800 00000043 802cd2a4 6e000045 00000043 00000000 8ef62000 [ 303.979219] 8eef5d00 8ef62b40 8fea7300 8f137918 00000000 00000000 0002bb01 793e5664 [ 303.987568] 8ef08884 00000001 8fea7300 00000002 8fc19e80 8eef5d00 00000006 00000003 [ 303.995934] 00000000 8030ba90 00000003 77ab3fd0 8149dc80 8004d1bc 8f15c000 8f383700 [ 304.004324] ... [ 304.006767] Call Trace: [ 304.009241] [<802cc920>] skb_panic+0x58/0x5c [ 304.013504] [<802cd2a4>] skb_push+0x78/0x90 [ 304.017783] [<8f137918>] 0x8f137918 [ 304.021269] Code: 00602825 0c02a3b4 24842888 <000c000d> 8c870060 8c8200a0 0007382b 00070336 8c88005c [ 304.031034] [ 304.032805] ---[ end trace b778c482b3f0bda9 ]--- [ 304.041384] Kernel panic - not syncing: Fatal exception in interrupt [ 304.051975] Rebooting in 3 seconds.. While the oops is for a 4.9-kernel, I was able to trigger the same oops with net-next as of yesterday. Fixes: 32f7adf633b9 ("net: qmi_wwan: support "raw IP" mode") Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * net: qmi_wwan: fix divide by 0 on bad descriptorsBjørn Mork2017-11-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 7fd078337201cf7468f53c3d9ef81ff78cb6df3b ] A CDC Ethernet functional descriptor with wMaxSegmentSize = 0 will cause a divide error in usbnet_probe: divide error: 0000 [#1] PREEMPT SMP KASAN Modules linked in: CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc8-44453-g1fdc1a82c34f #56 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event task: ffff88006bef5c00 task.stack: ffff88006bf60000 RIP: 0010:usbnet_update_max_qlen+0x24d/0x390 drivers/net/usb/usbnet.c:355 RSP: 0018:ffff88006bf67508 EFLAGS: 00010246 RAX: 00000000000163c8 RBX: ffff8800621fce40 RCX: ffff8800621fcf34 RDX: 0000000000000000 RSI: ffffffff837ecb7a RDI: ffff8800621fcf34 RBP: ffff88006bf67520 R08: ffff88006bef5c00 R09: ffffed000c43f881 R10: ffffed000c43f880 R11: ffff8800621fc406 R12: 0000000000000003 R13: ffffffff85c71de0 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88006ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe9c0d6dac CR3: 00000000614f4000 CR4: 00000000000006f0 Call Trace: usbnet_probe+0x18b5/0x2790 drivers/net/usb/usbnet.c:1783 qmi_wwan_probe+0x133/0x220 drivers/net/usb/qmi_wwan.c:1338 usb_probe_interface+0x324/0x940 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x522/0x740 drivers/base/dd.c:557 Fix by simply ignoring the bogus descriptor, as it is optional for QMI devices anyway. Fixes: 423ce8caab7e ("net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * net: cdc_ether: fix divide by 0 on bad descriptorsBjørn Mork2017-11-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 2cb80187ba065d7decad7c6614e35e07aec8a974 ] Setting dev->hard_mtu to 0 will cause a divide error in usbnet_probe. Protect against devices with bogus CDC Ethernet functional descriptors by ignoring a zero wMaxSegmentSize. Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * bonding: discard lowest hash bit for 802.3ad layer3+4Hangbin Liu2017-11-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit b5f862180d7011d9575d0499fa37f0f25b423b12 ] After commit 07f4c90062f8 ("tcp/dccp: try to not exhaust ip_local_port_range in connect()"), we will try to use even ports for connect(). Then if an application (seen clearly with iperf) opens multiple streams to the same destination IP and port, each stream will be given an even source port. So the bonding driver's simple xmit_hash_policy based on layer3+4 addressing will always hash all these streams to the same interface. And the total throughput will limited to a single slave. Change the tcp code will impact the whole tcp behavior, only for bonding usage. Paolo Abeni suggested fix this by changing the bonding code only, which should be more reasonable, and less impact. Fix this by discarding the lowest hash bit because it contains little entropy. After the fix we can re-balance between slaves. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * net: systemport: Correct IPG length settingsFlorian Fainelli2017-11-241-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 93824c80bf47ebe087414b3a40ca0ff9aab7d1fb ] Due to a documentation mistake, the IPG length was set to 0x12 while it should have been 12 (decimal). This would affect short packet (64B typically) performance since the IPG was bigger than necessary. Fixes: 44a4524c54af ("net: systemport: Add support for SYSTEMPORT Lite") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * net: vrf: correct FRA_L3MDEV encode typeJeff Barnhill2017-11-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 18129a24983906eaf2a2d448ce4b83e27091ebe2 ] FRA_L3MDEV is defined as U8, but is being added as a U32 attribute. On big endian architecture, this results in the l3mdev entry not being added to the FIB rules. Fixes: 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * tun/tap: sanitize TUNSETSNDBUF inputCraig Gallek2017-11-182-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 93161922c658c714715686cd0cf69b090cb9bf1d ] Syzkaller found several variants of the lockup below by setting negative values with the TUNSETSNDBUF ioctl. This patch adds a sanity check to both the tun and tap versions of this ioctl. watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [repro:2389] Modules linked in: irq event stamp: 329692056 hardirqs last enabled at (329692055): [<ffffffff824b8381>] _raw_spin_unlock_irqrestore+0x31/0x75 hardirqs last disabled at (329692056): [<ffffffff824b9e58>] apic_timer_interrupt+0x98/0xb0 softirqs last enabled at (35659740): [<ffffffff824bc958>] __do_softirq+0x328/0x48c softirqs last disabled at (35659731): [<ffffffff811c796c>] irq_exit+0xbc/0xd0 CPU: 0 PID: 2389 Comm: repro Not tainted 4.14.0-rc7 #23 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff880009452140 task.stack: ffff880006a20000 RIP: 0010:_raw_spin_lock_irqsave+0x11/0x80 RSP: 0018:ffff880006a27c50 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff10 RAX: ffff880009ac68d0 RBX: ffff880006a27ce0 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff880006a27ce0 RDI: ffff880009ac6900 RBP: ffff880006a27c60 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 000000000063ff00 R12: ffff880009ac6900 R13: ffff880006a27cf8 R14: 0000000000000001 R15: ffff880006a27cf8 FS: 00007f4be4838700(0000) GS:ffff88000cc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020101000 CR3: 0000000009616000 CR4: 00000000000006f0 Call Trace: prepare_to_wait+0x26/0xc0 sock_alloc_send_pskb+0x14e/0x270 ? remove_wait_queue+0x60/0x60 tun_get_user+0x2cc/0x19d0 ? __tun_get+0x60/0x1b0 tun_chr_write_iter+0x57/0x86 __vfs_write+0x156/0x1e0 vfs_write+0xf7/0x230 SyS_write+0x57/0xd0 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x7f4be4356df9 RSP: 002b:00007ffc18101c08 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4be4356df9 RDX: 0000000000000046 RSI: 0000000020101000 RDI: 0000000000000005 RBP: 00007ffc18101c40 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000293 R12: 0000559c75f64780 R13: 00007ffc18101d30 R14: 0000000000000000 R15: 0000000000000000 Fixes: 33dccbb050bb ("tun: Limit amount of queued packets per device") Fixes: 20d29d7a916a ("net: macvtap driver") Signed-off-by: Craig Gallek <kraig@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * tun: allow positive return values on dev_get_valid_name() callJulien Gomes2017-11-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 5c25f65fd1e42685f7ccd80e0621829c105785d9 ] If the name argument of dev_get_valid_name() contains "%d", it will try to assign it a unit number in __dev__alloc_name() and return either the unit number (>= 0) or an error code (< 0). Considering positive values as error values prevent tun device creations relying this mechanism, therefor we should only consider negative values as errors here. Signed-off-by: Julien Gomes <julien@arista.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * tap: reference to KVA of an unloaded module causes kernel panicGirish Moodalbail2017-11-183-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit dea6e19f4ef746aa18b4c33d1a7fed54356796ed ] The commit 9a393b5d5988 ("tap: tap as an independent module") created a separate tap module that implements tap functionality and exports interfaces that will be used by macvtap and ipvtap modules to create create respective tap devices. However, that patch introduced a regression wherein the modules macvtap and ipvtap can be removed (through modprobe -r) while there are applications using the respective /dev/tapX devices. These applications cause kernel to hold reference to /dev/tapX through 'struct cdev macvtap_cdev' and 'struct cdev ipvtap_dev' defined in macvtap and ipvtap modules respectively. So, when the application is later closed the kernel panics because we are referencing KVA that is present in the unloaded modules. ----------8<------- Example ----------8<---------- $ sudo ip li add name mv0 link enp7s0 type macvtap $ sudo ip li show mv0 |grep mv0| awk -e '{print $1 $2}' 14:mv0@enp7s0: $ cat /dev/tap14 & $ lsmod |egrep -i 'tap|vlan' macvtap 16384 0 macvlan 24576 1 macvtap tap 24576 3 macvtap $ sudo modprobe -r macvtap $ fg cat /dev/tap14 ^C <...system panics...> BUG: unable to handle kernel paging request at ffffffffa038c500 IP: cdev_put+0xf/0x30 ----------8<-----------------8<---------- The fix is to set cdev.owner to the module that creates the tap device (either macvtap or ipvtap). With this set, the operations (in fs/char_dev.c) on char device holds and releases the module through cdev_get() and cdev_put() and will not allow the module to unload prematurely. Fixes: 9a393b5d5988ea4e (tap: tap as an independent module) Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * net/mlx5e: Properly deal with encap flows add/del under neigh updateOr Gerlitz2017-11-181-35/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 3c37745ec614ff048d5dce38f976804b05d307ee ] Currently, the encap action offload is handled in the actions parse function and not in mlx5e_tc_add_fdb_flow() where we deal with all the other aspects of offloading actions (vlan, modify header) and the rule itself. When the neigh update code (mlx5e_tc_encap_flows_add()) recreates the encap entry and offloads the related flows, we wrongly call again into mlx5e_tc_add_fdb_flow(), this for itself would cause us to handle again the offloading of vlans and header re-write which puts things in non consistent state and step on freed memory (e.g the modify header parse buffer which is already freed). Since on error, mlx5e_tc_add_fdb_flow() detaches and may release the encap entry, it causes a corruption at the neigh update code which goes over the list of flows associated with this encap entry, or double free when the tc flow is later deleted by user-space. When neigh update (mlx5e_tc_encap_flows_del()) unoffloads the flows related to an encap entry which is now invalid, we do a partial repeat of the eswitch flow removal code which is wrong too. To fix things up we do the following: (1) handle the encap action offload in the eswitch flow add function mlx5e_tc_add_fdb_flow() as done for the other actions and the rule itself. (2) modify the neigh update code (mlx5e_tc_encap_flows_add/del) to only deal with the encap entry and rules delete/add and not with any of the other offloaded actions. Fixes: 232c001398ae ('net/mlx5e: Add support to neighbour update flow') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * net/mlx5: Fix health work queue spin lock to IRQ safeMoshe Shemesh2017-11-181-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 6377ed0bbae6fa28853e1679d068a9106c8a8908 ] spin_lock/unlock of health->wq_lock should be IRQ safe. It was changed to spin_lock_irqsave since adding commit 0179720d6be2 ("net/mlx5: Introduce trigger_health_work function") which uses spin_lock from asynchronous event (IRQ) context. Thus, all spin_lock/unlock of health->wq_lock should have been moved to IRQ safe mode. However, one occurrence on new code using this lock missed that change, resulting in possible deadlock: kernel: Possible unsafe locking scenario: kernel: CPU0 kernel: ---- kernel: lock(&(&health->wq_lock)->rlock); kernel: <Interrupt> kernel: lock(&(&health->wq_lock)->rlock); kernel: #012 *** DEADLOCK *** Fixes: 2a0165a034ac ("net/mlx5: Cancel delayed recovery work when unloading the driver") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * tap: double-free in error path in tap_open()Girish Moodalbail2017-11-181-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 78e0ea6791d7baafb8a0ca82b1bd0c7b3453c919 ] Double free of skb_array in tap module is causing kernel panic. When tap_set_queue() fails we free skb_array right away by calling skb_array_cleanup(). However, later on skb_array_cleanup() is called again by tap_sock_destruct through sock_put(). This patch fixes that issue. Fixes: 362899b8725b35e3 (macvtap: switch to use skb array) Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * geneve: Fix function matching VNI and tunnel ID on big-endianStefano Brivio2017-11-181-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 772e97b57a4aa00170ad505a40ffad31d987ce1d ] On big-endian machines, functions converting between tunnel ID and VNI use the three LSBs of tunnel ID storage to map VNI. The comparison function eq_tun_id_and_vni(), on the other hand, attempted to map the VNI from the three MSBs. Fix it by using the same check implemented on LE, which maps VNI from the three LSBs of tunnel ID. Fixes: 2e0b26e10352 ("geneve: Optimize geneve device lookup.") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * tun: call dev_get_valid_name() before register_netdevice()Cong Wang2017-11-181-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 0ad646c81b2182f7fa67ec0c8c825e0ee165696d ] register_netdevice() could fail early when we have an invalid dev name, in which case ->ndo_uninit() is not called. For tun device, this is a problem because a timer etc. are already initialized and it expects ->ndo_uninit() to clean them up. We could move these initializations into a ->ndo_init() so that register_netdevice() knows better, however this is still complicated due to the logic in tun_detach(). Therefore, I choose to just call dev_get_valid_name() before register_netdevice(), which is quicker and much easier to audit. And for this specific case, it is already enough. Fixes: 96442e42429e ("tuntap: choose the txq based on rxq") Reported-by: Dmitry Alexeev <avekceeb@gmail.com> Cc: Jason Wang <jasowang@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * macsec: fix memory leaks when skb_to_sgvec failsSabrina Dubroca2017-11-181-0/+2
| | | | | | | | | | | | | | | | | | [ Upstream commit 5aba2ba5030b66a6f8c93049b718556f9aacd7c6 ] Fixes: cda7ea690350 ("macsec: check return value of skb_to_sgvec always") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * ppp: fix race in ppp device destructionGuillaume Nault2017-11-181-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 6151b8b37b119e8e3a8401b080d532520c95faf4 ] ppp_release() tries to ensure that netdevices are unregistered before decrementing the unit refcount and running ppp_destroy_interface(). This is all fine as long as the the device is unregistered by ppp_release(): the unregister_netdevice() call, followed by rtnl_unlock(), guarantee that the unregistration process completes before rtnl_unlock() returns. However, the device may be unregistered by other means (like ppp_nl_dellink()). If this happens right before ppp_release() calling rtnl_lock(), then ppp_release() has to wait for the concurrent unregistration code to release the lock. But rtnl_unlock() releases the lock before completing the device unregistration process. This allows ppp_release() to proceed and eventually call ppp_destroy_interface() before the unregistration process completes. Calling free_netdev() on this partially unregistered device will BUG(): ------------[ cut here ]------------ kernel BUG at net/core/dev.c:8141! invalid opcode: 0000 [#1] SMP CPU: 1 PID: 1557 Comm: pppd Not tainted 4.14.0-rc2+ #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014 Call Trace: ppp_destroy_interface+0xd8/0xe0 [ppp_generic] ppp_disconnect_channel+0xda/0x110 [ppp_generic] ppp_unregister_channel+0x5e/0x110 [ppp_generic] pppox_unbind_sock+0x23/0x30 [pppox] pppoe_connect+0x130/0x440 [pppoe] SYSC_connect+0x98/0x110 ? do_fcntl+0x2c0/0x5d0 SyS_connect+0xe/0x10 entry_SYSCALL_64_fastpath+0x1a/0xa5 RIP: free_netdev+0x107/0x110 RSP: ffffc28a40573d88 ---[ end trace ed294ff0cc40eeff ]--- We could set the ->needs_free_netdev flag on PPP devices and move the ppp_destroy_interface() logic in the ->priv_destructor() callback. But that'd be quite intrusive as we'd first need to unlink from the other channels and units that depend on the device (the ones that used the PPPIOCCONNECT and PPPIOCATTACH ioctls). Instead, we can just let the netdevice hold a reference on its ppp_file. This reference is dropped in ->priv_destructor(), at the very end of the unregistration process, so that neither ppp_release() nor ppp_disconnect_channel() can call ppp_destroy_interface() in the interim. Reported-by: Beniamino Galvani <bgalvani@redhat.com> Fixes: 8cb775bc0a34 ("ppp: fix device unregistration upon netns deletion") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * can: c_can: don't indicate triple sampling support for D_CANRichard Schütz2017-11-152-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | commit fb5f0b3ef69b95e665e4bbe8a3de7201f09f1071 upstream. The D_CAN controller doesn't provide a triple sampling mode, so don't set the CAN_CTRLMODE_3_SAMPLES flag in ctrlmode_supported. Currently enabling triple sampling is a no-op. Signed-off-by: Richard Schütz <rschuetz@uni-koblenz.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * can: ifi: Fix transmitter delay calculationMarek Vasut2017-11-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4f7116757b4bd99e4ef2636c7d957a6d63035d11 upstream. The CANFD transmitter delay calculation formula was updated in the latest software drop from IFI and improves the behavior of the IFI CANFD core during bitrate switching. Use the new formula to improve stability of the CANFD operation. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Markus Marb <markus@marb.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * can: peak: Add support for new PCIe/M2 CAN FD interfacesStephane Grosjean2017-11-151-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4cbdd0ee67191481ec57ceed94febdfef95c9f25 upstream. This adds support for the following PEAK-System CAN FD interfaces: PCAN-cPCIe FD CAN FD Interface for cPCI Serial (2 or 4 channels) PCAN-PCIe/104-Express CAN FD Interface for PCIe/104-Express (1, 2 or 4 ch.) PCAN-miniPCIe FD CAN FD Interface for PCIe Mini (1, 2 or 4 channels) PCAN-PCIe FD OEM CAN FD Interface for PCIe OEM version (1, 2 or 4 ch.) PCAN-M.2 CAN FD Interface for M.2 (1 or 2 channels) Like the PCAN-PCIe FD interface, all of these boards run the same IP Core that is able to handle CAN FD (see also http://www.peak-system.com). Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * can: sun4i: handle overrun in RX FIFOGerhard Bertelsmann2017-11-151-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 4dcf924c2eda0c47a5c53b7703e3dc65ddaa8920 upstream. SUN4Is CAN IP has a 64 byte deep FIFO buffer. If the buffer is not drained fast enough (overrun) it's getting mangled. Already received frames are dropped - the data can't be restored. Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * can: kvaser_usb: Ignore CMD_FLUSH_QUEUE_REPLY messagesJimmy Assarsson2017-11-021-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit e1d2d1329a5722dbecc9c278303fcc4aa01f8790 upstream. To avoid kernel warning "Unhandled message (68)", ignore the CMD_FLUSH_QUEUE_REPLY message for now. As of Leaf v2 firmware version v4.1.844 (2017-02-15), flush tx queue is synchronous. There is a capability bit indicating whether flushing tx queue is synchronous or asynchronous. A proper solution would be to query the device for capabilities. If the synchronous tx flush capability bit is set, we should wait for CMD_FLUSH_QUEUE_REPLY message, while flushing the tx queue. Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * can: kvaser_usb: Correct return value in printoutJimmy Assarsson2017-11-021-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 8f65a923e6b628e187d5e791cf49393dd5e8c2f9 upstream. If the return value from kvaser_usb_send_simple_msg() was non-zero, the return value from kvaser_usb_flush_queue() was printed in the kernel warning. Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * can: sun4i: fix loopback modeGerhard Bertelsmann2017-11-021-2/+1
| | | | | | | | | | | | | | | | | | | | | | commit 3a379f5b36ae039dfeb6f73316e47ab1af4945df upstream. Fix loopback mode by setting the right flag and remove presume mode. Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * rtlwifi: rtl8821ae: Fix connection lost problemLarry Finger2017-10-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit b8b8b16352cd90c6083033fd4487f04fae935c18 upstream. In commit 40b368af4b75 ("rtlwifi: Fix alignment issues"), the read of REG_DBI_READ was changed from 16 to 8 bits. For unknown reasonsi this change results in reduced stability for the wireless connection. This regression was located using bisection. Fixes: 40b368af4b75 ("rtlwifi: Fix alignment issues") Reported-and-tested-by: James Cameron <quozl@laptop.org> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * brcmsmac: make some local variables 'static const' to reduce stack sizeArnd Bergmann2017-10-271-100/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c503dd38f850be28867ef7a42d9abe5ade81a9bd upstream. With KASAN and a couple of other patches applied, this driver is one of the few remaining ones that actually use more than 2048 bytes of kernel stack: broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function 'wlc_phy_workarounds_nphy_gainctrl': broadcom/brcm80211/brcmsmac/phy/phy_n.c:16065:1: warning: the frame size of 3264 bytes is larger than 2048 bytes [-Wframe-larger-than=] broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function 'wlc_phy_workarounds_nphy': broadcom/brcm80211/brcmsmac/phy/phy_n.c:17138:1: warning: the frame size of 2864 bytes is larger than 2048 bytes [-Wframe-larger-than=] Here, I'm reducing the stack size by marking as many local variables as 'static const' as I can without changing the actual code. This is the first of three patches to improve the stack usage in this driver. It would be good to have this backported to stabl kernels to get all drivers in 'allmodconfig' below the 2048 byte limit so we can turn on the frame warning again globally, but I realize that the patch is larger than the normal limit for stable backports. The other two patches do not need to be backported. Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * brcmfmac: Add check for short event packetsKevin Cernekee2017-10-271-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit dd2349121bb1b8ff688c3ca6a2a0bea9d8c142ca upstream. The length of the data in the received skb is currently passed into brcmf_fweh_process_event() as packet_len, but this value is not checked. event_packet should be followed by DATALEN bytes of additional event data. Ensure that the received packet actually contains at least DATALEN bytes of additional data, to avoid copying uninitialized memory into event->data. Suggested-by: Mattias Nissler <mnissler@chromium.org> Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * can: flexcan: fix p1010 state transition issueZHU Yi (ST-FIR/ENG1-Zhu)2017-10-271-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit fb5b91d61bebc24686ffc379138fd67808b1a1e6 upstream. Enable FLEXCAN_QUIRK_BROKEN_WERR_STATE and FLEXCAN_QUIRK_BROKEN_PERR_STATE for p1010 to report correct state transitions. Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * can: flexcan: fix i.MX28 state transition issueZHU Yi (ST-FIR/ENG1-Zhu)2017-10-271-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 083c5571290a2d4308b75f1a59cf376b6e907808 upstream. Enable FLEXCAN_QUIRK_BROKEN_PERR_STATE for i.MX28 to report correct state transitions, especially to error passive. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * can: flexcan: fix i.MX6 state transition issueZHU Yi (ST-FIR/ENG1-Zhu)2017-10-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit cf9c04677f2bf599b44511963039ec6e25583feb upstream. Enable FLEXCAN_QUIRK_BROKEN_PERR_STATE for i.MX6 to report correct state transitions. Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * can: flexcan: implement error passive state quirkZHU Yi (ST-FIR/ENG1-Zhu)2017-10-271-9/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit da49a8075c00b4d98ef069a0ee201177a8b79ead upstream. Add FLEXCAN_QUIRK_BROKEN_PERR_STATE for better description of the missing error passive interrupt quirk. Error interrupt flooding may happen if the broken error state quirk fix is enabled. For example, in case there is singled out node on the bus and the node sends a frame, then error interrupt flooding happens and will not stop because the node cannot go to bus off. The flooding will stop after another node connected to the bus again. If high bitrate configured on the low end system, then the flooding may causes performance issue, hence, this patch mitigates this by: 1. disable error interrupt upon error passive state transition 2. re-enable error interrupt upon error warning state transition 3. disable/enable error interrupt upon error active state transition depends on FLEXCAN_QUIRK_BROKEN_WERR_STATE In this way, the driver is still able to report correct state transitions without additional latency. When there are bus problems, flooding of error interrupts is limited to the number of frames required to change state from error warning to error passive if the core has [TR]WRN_INT connected (FLEXCAN_QUIRK_BROKEN_WERR_STATE is not enabled), otherwise, the flooding is limited to the number of frames required to change state from error active to error passive. Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * can: flexcan: rename legacy error state quirkZHU Yi (ST-FIR/ENG1-Zhu)2017-10-271-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2f8639b24b4f4f9dd6cf7c1f2aea90e2fcbcc451 upstream. Rename FLEXCAN_QUIRK_BROKEN_ERR_STATE to FLEXCAN_QUIRK_BROKEN_WERR_STATE for better description of the missing [TR]WRN_INT quirk. Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * can: flexcan: fix state transition regressionZHU Yi (ST-FIR/ENG1-Zhu)2017-10-271-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit ad2302345d59d29232cb668baaae9e840925d153 upstream. Update state upon any interrupt to report correct state transitions in case the flexcan core enabled the broken error state quirk fix. Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * can: esd_usb2: Fix can_dlc value for received RTR, framesStefan Mätje2017-10-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 72d92e865d1560723e1957ee3f393688c49ca5bf upstream. The dlc member of the struct rx_msg contains also the ESD_RTR flag to mark received RTR frames. Without the fix the can_dlc value for received RTR frames would always be set to 8 by get_can_dlc() instead of the received value. Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device") Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * can: gs_usb: fix busy loop if no more TX context is availableWolfgang Grandegger2017-10-271-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 97819f943063b622eca44d3644067c190dc75039 upstream. If sending messages with no cable connected, it quickly happens that there is no more TX context available. Then "gs_can_start_xmit()" returns with "NETDEV_TX_BUSY" and the upper layer does retry immediately keeping the CPU busy. To fix that issue, I moved "atomic_dec(&dev->active_tx_urbs)" from "gs_usb_xmit_callback()" to the TX done handling in "gs_usb_receive_bulk_callback()". Renaming "active_tx_urbs" to "active_tx_contexts" and moving it into "gs_[alloc|free]_tx_context()" would also make sense. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * brcmfmac: setup passive scan if requested by user-spaceArend Van Spriel2017-10-122-15/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 35f62727df0ed8e5e4857e162d94fd46d861f1cf upstream. The driver was not properly configuring firmware with regard to the type of scan. It always performed an active scan even when user-space was requesting for passive scan, ie. the scan request was done without any SSIDs specified. Reported-by: Huang, Jiangyang <Jiangyang.Huang@itron.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * brcmfmac: add length check in brcmf_cfg80211_escan_handler()Arend Van Spriel2017-10-121-3/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 17df6453d4be17910456e99c5a85025aa1b7a246 upstream. Upon handling the firmware notification for scans the length was checked properly and may result in corrupting kernel heap memory due to buffer overruns. This fix addresses CVE-2017-0786. Cc: Kevin Cernekee <cernekee@chromium.org> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iwlwifi: mvm: use IWL_HCMD_NOCOPY for MCAST_FILTER_CMDLuca Coelho2017-10-121-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 97bce57bd7f96e1218751996f549a6e61f18cc8c upstream. The MCAST_FILTER_CMD can get quite large when we have many mcast addresses to set (we support up to 255). So the command should be send as NOCOPY to prevent a warning caused by too-long commands: WARNING: CPU: 0 PID: 9700 at /root/iwlwifi/stack-dev/drivers/net/wireless/intel/iwlwifi/pcie/tx.c:1550 iwl_pcie_enqueue_hcmd+0x8c7/0xb40 [iwlwifi] Command MCAST_FILTER_CMD (0x1d0) is too large (328 bytes) This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196743 Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * rocker: fix rocker_tlv_put_* functions for KASANArnd Bergmann2017-10-121-18/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6098d7ddd62f532f80ee2a4b01aca500a8e4e9e4 upstream. Inlining these functions creates lots of stack variables that each take 64 bytes when KASAN is enabled, leading to this warning about potential stack overflow: drivers/net/ethernet/rocker/rocker_ofdpa.c: In function 'ofdpa_cmd_flow_tbl_add': drivers/net/ethernet/rocker/rocker_ofdpa.c:621:1: error: the frame size of 2752 bytes is larger than 1536 bytes [-Werror=frame-larger-than=] gcc-8 can now consolidate the stack slots itself, but on older versions we get the same behavior by using a temporary variable that holds a copy of the inline function argument. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * net/mlx5e: IPoIB, Fix access to invalid memory addressRoi Dayan2017-10-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 38e8a5c040d3ec99a8351c688dcdf0f549611565 ] When cleaning rdma netdevice we need to save the mdev pointer because priv is released when we release netdev. This bug was found using the kernel address sanitizer (KASAN). use-after-free in mlx5_rdma_netdev_free+0xe3/0x100 [mlx5_core] Fixes: 48935bbb7ae8 ("net/mlx5e: IPoIB, Add netdevice profile skeleton") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * net: dsa: mv88e6xxx: lock mutex when freeing IRQsVivien Didelot2017-10-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit b32ca44a88def4bf92626d8777494c6f14638c42 ] mv88e6xxx_g2_irq_free locks the registers mutex, but not mv88e6xxx_g1_irq_free, which results in a stack trace from assert_reg_lock when unloading the mv88e6xxx module. Fix this. Fixes: 3460a5770ce9 ("net: dsa: mv88e6xxx: Mask g1 interrupts and free interrupt") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * net: dsa: mv88e6xxx: Allow dsa and cpu ports in multiple vlansAndrew Lunn2017-10-121-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit db06ae41945b14feb7f696dcafe8048cc37e8a20 ] Ports with the same VLAN must all be in the same bridge. However the CPU and DSA ports need to be in multiple VLANs spread over multiple bridges. So exclude them when performing this test. Fixes: b2f81d304cee ("net: dsa: add CPU and DSA ports as VLAN members") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OpenPOWER on IntegriCloud