summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
Commit message (Collapse)AuthorAgeFilesLines
* iwlagn: clean up TXQ indirectionJohannes Berg2011-05-1310-203/+164
| | | | | | | | | All of these functions no longer need to be accessed indirectly since they're shared in all AGN devices. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
* iwlagn: prepare for multi-TB commandsJohannes Berg2011-05-1314-46/+47
| | | | | | | | | | In a subsequent patch, I want to make commands use multiple TBs in a TFD. This is a simple change to prepare the data structures for this, with as of now still just a single TB supported. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
* ath9k_hw: Fix STA connection issues with AR9380 (XB113).Senthil Balasubramanian2011-05-121-1/+1
| | | | | | | | | | | | | XB113 (AR9380) 3x3 SB 5G only cards were failing to connect to APs due to incorrect xpabiaslevel configuration. fix it. Cc: stable@kernel.org Cc: Ray Li <ray.li@greenwavereality.com> Cc: Kathy Giori <kathy.giori@atheros.com> Cc: Aeolus Yang <aeolus.yang@atheros.com> Cc: compat@orbit-lab.org Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove mwifiex_recv_complete functionAmitkumar Karwar2011-05-123-32/+3
| | | | | | | | | | | | | | The function - increments dropped rx_packet count if status code passed to it is "-1". - frees SKB buffer. But currently the function is being called with "0" status code. This patch replaces above function by dev_kfree_skb_any() call. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: fix dual band assumption for XB113Luis R. Rodriguez2011-05-121-1/+1
| | | | | | | | | | | | | | | | | The XB113 cards are single band, 5 GHz-only, but the default settings were configured to assume it was dual band. Users of these cards then would see 2.4 GHz channels but you would never get any scan results from these channels given that the radio is not present. Cc: stable@kernel.org Cc: Fiona Cain <Fiona.Cain@atheros.com> Cc: Ray Li <ray.li@greenwavereality.com> Cc: Kathy Giori <kathy.giori@atheros.com> Cc: Aeolus Yang <aeolus.yang@atheros.com> Cc: Dan Friedman <dan.friedman@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: Add libertas_disablemesh module parameter to disable mesh interfaceSascha Silbe2011-05-111-1/+8
| | | | | | | | | This allows individual users and deployments to disable mesh support at runtime, i.e. without having to build and maintain a custom kernel. Based on a patch by Paul Fox <pgf@laptop.org>. Signed-off-by: Sascha Silbe <silbe@activitycentral.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: cleanup ioctl.hBing Zhao2011-05-113-102/+4
| | | | | | | | | Some structures and macros in ioctl.h are redundant or no longer used. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove redundant local structuresAmitkumar Karwar2011-05-111-19/+9
| | | | | | | | | Avoid use of local structure in the function if the structure is already allocated by the caller and the structure pointer is passed. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: implement timeouts workaroundRafał Miłecki2011-05-111-1/+12
| | | | | | | Documented in: <4DCA7E40.9070709@lwfinger.net> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: fix a regression in PS frame filter handlingFelix Fietkau2011-05-112-0/+11
| | | | | | | | | | Only leave filtering enabled for AP or VLAN interfaces, clear the destination mask for all other interfaces. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Ben Greear <greearb@candelatech.com> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: move MAC PHY clock controling functionRafał Miłecki2011-05-113-16/+15
| | | | | | | This is not N-PHY specific function, we partially duplicate code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43legacy: trivial: use TMSLOW def instead of magic valueRafał Miłecki2011-05-111-1/+1
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Fix lockup due to un-init spinlock.Ben Greear2011-05-111-1/+1
| | | | | | | | This was introduced in 2.6.39-rc1 it seems. Signed-off-by: Ben Greear <greearb@candelatech.com> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: fix beaconing for mesh interfacesJavier Cardona2011-05-111-1/+3
| | | | | | | | | | | | | | | Mesh beaconing on ath9k was broken by this commit: commit 4801416c76a3a355076d6d371c00270dfe332e1c Author: Ben Greear <greearb@candelatech.com> Date: Sat Jan 15 19:13:48 2011 +0000 This patch assigns the right opmode when the device is used in mesh mode. Reported-by: Fabrice Deyber fabricedeyber@agilemesh.com Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: Use netdev_<level> or dev_<level> where possibleJoe Perches2011-05-1111-93/+130
| | | | | | | | | | | | | | | Using the more descriptive logging styles gives a bit more information about the device being operated on. Makes the object trivially smaller too. $ size drivers/net/wireless/libertas/built-in.o.* 187730 2973 38488 229191 37f47 drivers/net/wireless/libertas/built-in.o.new 188195 2973 38488 229656 38118 drivers/net/wireless/libertas/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: Convert lbs_pr_<level> to pr_<level>Joe Perches2011-05-1112-171/+173
| | | | | | | | | | | Use the standard pr_<level> functions eases grep a bit. Added a few missing terminating newlines to messages. Coalesced long formats. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: remove unnecessary struct mwifiex_opt_sleep_confirm_bufferAmitkumar Karwar2011-05-103-28/+20
| | | | | | | | | | | | | | | | | | | The structure definition is struct mwifiex_opt_sleep_confirm_buffer { u8 hdr[4]; struct mwifiex_opt_sleep_confirm ps_cfm_sleep; } __packed; For sleep_confirm command we already reserve 4 bytes (using skb_reserve()) for an interface header. It will be filled later by interface specific code. We don't need "hdr[4]" element in above structure. So we can use "struct mwifiex_opt_sleep_confirm" directly instead of "struct mwifiex_opt_sleep_confirm_buffer". Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Failed to set default beacon rssi in AP/IBSS modeRajkumar Manoharan2011-05-101-0/+1
| | | | | | | This beacon rssi will be used to set noisefloor during ani reset. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix rssi update in ad-hoc modeRajkumar Manoharan2011-05-101-1/+2
| | | | | | | | The average beacon rssi which will be used by ani is not updated in adhoc mode. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Change DCU backoff thresh for AR9340Rajkumar Manoharan2011-05-101-2/+7
| | | | | | | | By changing DCU backoff threshold for AR9340 to 1, helps to reduce rx overrurns seen while running bidirectional traffic. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: Corrected xpabiaslevel register settings for AR9340Rajkumar Manoharan2011-05-101-8/+6
| | | | | Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: rtl8192cu: Fix memset/memcpy using sizeof(ptr) not sizeof(*ptr)Joe Perches2011-05-101-2/+2
| | | | | | | | | | | | | | Found via coccinelle script @@ type T; T* ptr; expression E1; @@ * memset(E1, 0, sizeof(ptr)); Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: remove get_channel_noise functionMohammed Shafi Shajakhan2011-05-102-9/+0
| | | | | | | currently ath9k_hw_getchan_noise is not used anywhere Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: trivial: include ssb word in ssb specific functionsRafał Miłecki2011-05-101-4/+4
| | | | | | | This can be helpful when we decide to add support for other buses. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: fix null derefs, mem leaks and triviaChristoph Fritz2011-05-108-17/+23
| | | | | | | | | | | | | | This patch: - adds kfree() where necessary - prevents potential null dereferences - makes use of kfree_skb() - replaces -1 for failed kzallocs with -ENOMEM Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Reviewed-by: Kiran Divekar <dkiran@marvell.com> Tested-by: Amitkumar Karwar <akarwar@marvell.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43legacy: drop ssb-duplicated workaround for dangling coresRafał Miłecki2011-05-101-18/+0
| | | | | | | | | | Remove the code to detect inactive 802.11 cores, as that function is now done in ssb. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: drop ssb-duplicated workaround for dangling coresRafał Miłecki2011-05-101-17/+0
| | | | | | | | | | Remove the code to detect inactive 802.11 cores, as that function is now done in ssb. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix rmmod hang of rt2800pciGertjan van Wingerde2011-05-101-1/+1
| | | | | | | | | | txstatus_timer should only be deleted for USB devices, as it is only initialized for USB devices. Reported-by: Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* p54pci: fix -Wunused-but-set-variable warningsChristian Lamparter2011-05-101-2/+1
| | | | | | | | p54pci.c: In function ‘p54p_tx’: p54pci.c:334:6: warning: variable ‘device_idx’ set but not used Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* carl9170: fix -Wunused-but-set-variable warningsChristian Lamparter2011-05-101-9/+0
| | | | | | | | | | | | | | tx.c: In function ‘carl9170_tx_accounting_free’: tx.c:159:28: warning: variable ‘txinfo’ set but not used tx.c: In function ‘carl9170_tx_status_process_ampdu’: tx.c:383:27: warning: variable ‘ar_info’ set but not used tx.c: In function ‘__carl9170_tx_process_status’: tx.c:626:27: warning: variable ‘arinfo’ set but not used tx.c: In function ‘carl9170_tx_ampdu_queue’: tx.c:1324:15: warning: variable ‘max’ set but not used Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: rtl8192se: Remove need to disable ASPMChaoming Li2011-05-102-1/+4
| | | | | | | | | | | | When this driver was initially submitted, the system would crash unless ASPM was disabled. This problem has been fixed. This patch also adds a printk that outputs the name of the firmware file that is used. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: Move 2 large arrays off stackLarry Finger2011-05-101-7/+28
| | | | | | | | | | | In driver rtlwifi, efuse_read() places two relatively large arrays on the stack - a 1D u8 array of size 128, and a 2D array of u16 with 128 * 4 elements. With driver rtl8192de, the sizes will be 256 and 256 * 4 respectively. As that will make the 2D array be 2048 bytes, I have changed the code to use kmalloc to allocate the space. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: fix iwl_is_any_associatedJohannes Berg2011-05-101-8/+11
| | | | | | | | | | | | | | | | | | | | | | The function iwl_is_any_associated() was intended to check both contexts, but due to an oversight it only checks the BSS context. This leads to a problem with scanning since the passive dwell time isn't restricted appropriately and a scan that includes passive channels will never finish if only the PAN context is associated since the default dwell time of 120ms won't fit into the normal 100 TU DTIM interval. Fix the function by using for_each_context() and also reorganise the other functions a bit to take advantage of each other making the code easier to read. Cc: stable@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: process TSF out of range before RXRajkumar Manoharan2011-05-101-11/+11
| | | | | | | | Processing TSF out of range before RX helps to update beacon timers so early in the succeeding rx process. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: avoid enabling interrupts while processing rxRajkumar Manoharan2011-05-104-3/+17
| | | | | | | | | | | | The assumsion is that while processing ath9k tasklet, interrupts were already disabled and it will be enabled at the completion of ath9k tasklet. But whenever TSFOOR is raised, the driver configures the beacon timers after having received a beacon frame from the AP which inturn enables the interrupts. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: led stay solid on when no trafficWey-Yi Guy2011-05-101-1/+19
| | | | | | | | | | commit 5ed540aecc2aae92d5c97b9a9306a5bf88ad5574 change the led behavior for iwlwifi driver; the side effect cause led blink all the time. Modify the led blink table to fix this problem Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'wireless-next-2.6' of ↵John W. Linville2011-05-1016-218/+747
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
| * iwlagn: check DMA mapping errorsJohannes Berg2011-05-062-28/+45
| | | | | | | | | | | | | | | | | | | | DMA mappings can fail, but the current code doesn't check for that. Add checking, which requires some restructuring for proper error paths. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
| * iwlagn: remove bytecount indirectionJohannes Berg2011-05-067-31/+8
| | | | | | | | | | | | | | | | | | All AGN devices need the bytecount table, so remove the indirection and make the functions static again. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
| * iwlagn: dont update bytecount table for command queueJohannes Berg2011-05-062-19/+13
| | | | | | | | | | | | | | | | | | | | | | The device doesn't use the bytecount table for the command queue, only for aggregation queues to make aggregation decisions. So don't update it for the command queue (and we even updated it with wrong values). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
| * iwlagn: remove unused variableJohannes Berg2011-05-061-4/+0
| | | | | | | | | | | | | | The variable 'len' here is set but never used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
| * iwlagn: remove frame pre-allocationJohannes Berg2011-05-062-125/+25
| | | | | | | | | | | | | | | | | | The frame pre-allocation is quite a bit of complex code, all to avoid a single allocation. Remove it and consolidate the beacon sending code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
| * iwlagn: remove get_hcmd_size indirectionJohannes Berg2011-05-063-9/+0
| | | | | | | | | | | | | | There's no need for this, all commands are the right size. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
| * iwlwifi: support the svtool messages interactions through nl80211 test modeCindy H. Kao2011-05-068-2/+656
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the feature to support the test mode operation through the generic netlink channel NL80211_CMD_TESTMODE between intel wireless device iwlwifi and the user space application svtool. The main purpose is to create a transportation layer between the iwlwifi device and the user space application so that the interaction between the user space application svtool and the iwlwifi device in the kernel space is in a way of generic netlink messaging. The detail specific functions are: 1. The function iwl_testmode_cmd() is added to digest the svtool test command from the user space application. The svtool test commands are categorized to three types : commands to be processed by the device ucode, commands to access the registers, and commands to be processed at the driver level(such as reload the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers and reply to user space regarding the command execution status. Extra data is returned to the user space application if there's any. 2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous messages from the iwlwifi device to the user space. Regardless the message types, whenever there is a valid spontaneous message received by the iwlwifi ISR, iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user space. The message content is not attacked and the message parsing is left to the user space application. Implementation guidelines: 1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE channel, therefore, the codes need to follow the regulations set by cfg80211.ko to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi device is indicated with ieee80211_ops and can be actually accessed. Therefore, a callback iwl_testmode_cmd() is added to the structure iwlagn_hw_ops in iwl-agn.c. 2. It intends to utilize those low level device access APIs from iwlwifi device driver (ie. iwlagn.ko) rather than creating it's own set of device access functions. For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused. 3. The main functions are maintained in new files instead of spreading all over the existing iwlwifi driver files. The new files added are : drivers/net/wireless/iwlwifi/iwl-sv-open.c - to handle the user space test mode application command and reply the respective command status to the user space application. - to multicast the spontaneous messages from device to user space. drivers/net/wireless/iwlwifi/iwl-testmode.h - the commonly referenced definitions for the TLVs used in the generic netlink messages Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
* | mwl8k: Do not ask mac80211 to generate IV for crypto keysYogesh Ashok Powar2011-05-051-8/+8
| | | | | | | | | | | | | | | | | | | | | | Since firmware is capable of generating IV's for all crypto suits (TKIP, CCMP and WEP), do not ask mac80211 to generate IV when HW crypto is being used. Instead only reserve appropriate space in tx skb's in the driver, so that the firmware can write IV's values. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | b43legacy: drop invalid IMCFGLO workaroundRafał Miłecki2011-05-051-32/+0
| | | | | | | | | | | | | | | | | | We were performing it on wrong core, it was outdated and is already implemented in ssb. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | b43: drop invalid IMCFGLO workaroundRafał Miłecki2011-05-051-27/+1
| | | | | | | | | | | | | | | | We were performing it on wrong core, it was outdated and is already implemented in ssb. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k_hw: fix power for the HT40 duplicate framesLuis R. Rodriguez2011-05-051-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With AR9003 at about ~ 10 feet from an AP that uses RTS / CTS you will be able to associate but not not get data through given that the power for the rates used was set too low. This increases the power and permits data connectivity at longer distances from access points when connected with HT40. Without this you will not get any data through when associated to APs configured in HT40 at about more than 10 feet away. Cc: stable@kernel.org Cc: Fiona Cain <fcain@atheros.com> Cc: Zhen Xie <Zhen.Xie@Atheros.com> Cc: Kathy Giori <kathy.giori@atheros.com> Cc: Neha Choksi <neha.choksi@atheros.com> Cc: Wayne Daniel <wayne.daniel@atheros.com> Cc: Gaurav Jauhar <gaurav.jauhar@atheros.com> Cc: Samira Naraghi <samira.naraghi@atheros.com> CC: Ashok Chennupati <ashok.chennupati@atheros.com> Cc: Lance Zimmerman <lance.zimmerman@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | rt2x00: Fix transfer speed regression for USB hardwareIvo van Doorn2011-05-051-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch: rt2x00: Make rt2x00_queue_entry_for_each more flexible commit: 10e11568ca8b8a15f7478f6a4ceebabcbdba1018 introduced a severe regression on the throughput for USB hardware. It turns out that the exiting of the rt2x00queue_for_each_entry() was done too early. The exact cause for this regression is unknown, but by disabling the premature exiting of the loop seems to resolve the issue. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Reported-by: Yasushi SHOJI <yashi@atmark-techno.com> Reported-by: Balint Viragh <bviragh@dension.com> Tested-by: Balint Viragh <bviragh@dension.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | rt2x00: Initial support for RT5370 USB devices.Gertjan van Wingerde2011-05-054-2/+24
| | | | | | | | | | | | | | | | | | Add necessary RF chipset define and basic support for these devices. Tested-by: Juan Carlos Garza <juancarlosgarza@gmail.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
OpenPOWER on IntegriCloud