summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/wl12xx/conf.h
Commit message (Collapse)AuthorAgeFilesLines
* wireless/wl12xx/wl1251: move TI WLAN modules to a common ti subdirectoryLuciano Coelho2012-04-121-1326/+0
| | | | | | | | | Move wl12xx and wl1251 modules into a new drivers/net/wireless/ti directory. Add a TI WLAN Kconfig option and Makefile to support this change. Signed-off-by: Luciano Coelho <coelho@ti.com> Cc: John W. Linville <linville@tuxdriver.com>
* wl12xx: adaptive sched scan dwell timesEyal Shapira2012-04-101-6/+21
| | | | | | | | | | | | | | | | | Set the dwell times for sched scan according to the number of probe requests which are going to be transmitted. This should fix the too short dwell time problem which prevented some of the probe requests from being transmitted in cases of high number of SSIDs (10+) to be actively sched scanned. However, in the common case of having up to 1-2 SSIDs that require active scan, the dwell time would be kept to a minimum which should conserve power. This is important as sched scan also runs periodically while the host is suspended and there's great importance to keep power consumption as low as possible. Signed-off-by: Eyal Shapira <eyal@wizery.com> [fixed a couple of new strict checkpatch warnings] Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: implement SW Tx watchdogArik Nemtsov2012-03-081-0/+3
| | | | | | | | | | | | | | | | Track freed FW blocks during Tx. If no blocks were freed during a predefined timeout, initiate a HW recovery. This helps in situations when the FW watchdog fails. Don't trigger recovery during activities that can temporarily stop Tx. This includes: - scanning - buffering packets for sleeping stations (AP role) - ROC on any role Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: use split scan for normal scanEyal Shapira2012-02-151-0/+8
| | | | | | | | | | | | Split scan allows the FW to schedule other activities during a scan which may be a long operation. This is achieved by setting a trigger TID to ANY_TID and a scan trigger timeout other than 0. The default one is set to 50ms. Signed-off-by: Eyal Shapira <eyal@wizey.com> Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: add forced_ps modeEyal Shapira2012-02-151-0/+6
| | | | | | | | | | | For certain WiFi certification tests forcing PS is necessary. Since DPS is now enabled in the FW and this can't be achieved by using netlatency this required a new config option. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: Set different wake up conditions in case of suspendEyal Shapira2012-02-151-0/+13
| | | | | | | | | | Added ability to set different wake up conditions for suspend/resume. Set default values to wake up every 3 DTIMs while suspended and every 1 DTIM while resumed Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: add new coex paramsEliad Peller2012-02-151-0/+4
| | | | | | | | new params were added to the coex params. Add them with default value of 0. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: Set IEEE80211_TX_RC_SHORT_GI if short GI was used onPontus Fuchs2012-02-151-2/+3
| | | | | | | | | New FW reports usage of short GI as a rate class index. Check for this rate and set the IEEE80211_TX_RC_SHORT_GI if used. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: Set IEEE80211_TX_RC_MCS on MCS rates on TX complete.Pontus Fuchs2012-02-151-0/+4
| | | | | | | | | | IEEE80211_TX_RC_MCS was not set correctly leading to incorrect link speed calculation. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Ido Reis <idor@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: add support for HW dynamic PSEyal Shapira2012-02-151-0/+6
| | | | | | | | | | | | | | | | FW now supports dynamic PS so we don't need to use mac80211 support. FW will go to PSM after a specified timeout with no Rx/Tx traffic. - Changed FW API to include new PS mode (AUTO_MODE) and including timeout parameter - The default PS mode would be dynamic PS - Default timeout is 100ms (same as it used to be in mac80211) - Avoid using mac80211 APIs to disable/enable dynamic PS as we're not using mac80211 PS control anymore. - COEX is handled by the FW while in dynamic PS so removed handling of SOFT_GEMINI Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: remove PS management codeEyal Shapira2012-02-151-7/+0
| | | | | | | | | Removal of PS management code from the driver as PS is handled by the FW (dynamic PS) Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: set scan probe requests rate according to the no_cck flagGuy Eilam2011-11-081-0/+4
| | | | | | | | | Set the TX rate of probe requests during scanning according to the no_cck flag in the scan request struct. Signed-off-by: Guy Eilam <guy@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: configure rate policy for p2p operationsEliad Peller2011-10-071-1/+5
| | | | | | | | | | | | | | | p2p packets should go out only with OFDM rates. Configure a new rate policy that will (later) be used during p2p_find (when the p2p_cli / p2p_go interfaces are in use, we won't have to use this policy, as the configured rates should already be OFDM-only). Additionally, update CONF_TX_MAX_RATE_CLASSES to reflect the current value from the fw api. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: Include OFDM rates in IBSS modeShahar Levi2011-09-231-4/+2
| | | | | | | | | | We were including only 11b rates in IBSS mode. This patch adds OFDM rates. [Rephrased commit log and removed one unnecessary comment. -- Luca] Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: add config_hangover commandEliad Peller2011-09-141-8/+15
| | | | | | | | | Add wl12xx_acx_config_hangover() and respective conf values. This command configures how long the chip will stay awake after it was configured to enter psm. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: AP-mode - configure HT rate support to the FWArik Nemtsov2011-08-221-0/+5
| | | | | | | | | | | | | Unconditionally configure HT rate support to the FW on all ACs when starting the AP. When 11n support is disabled by usermode (hostapd), each STA joining the AP will appear as a non-HT STA. This will stop us from accidentally transmitting using MCS rates. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: re-enable block ack session supportArik Nemtsov2011-08-221-1/+8
| | | | | | | | | | | Incorporate interface changes for HT support. Add ba_bitmap field to the wl1271_link struct, to indicate activate RX BA sessions (for AP mode). Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: update BT coex configuration paramsEliad Peller2011-08-221-211/+107
| | | | | | | | The BT coex params api have been changed. Update it, and init coex for both sta and ap. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: add set_rate_mgmt_params acxEliad Peller2011-08-221-0/+20
| | | | | | | Configure rate management parameters on hw init Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: AP mode - support FW TX inactivity triggersArik Nemtsov2011-07-051-1/+9
| | | | | | | | | In AP mode we register for the MAX_TX_RETRY and INACTIVE_STA events. Both are reported to the upper layers as a TX failure in the offending stations. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: Support routing FW logs to the hostIdo Yariv2011-06-271-0/+25
| | | | | | | | | | | | | | | | | | | | | | A recently added feature to the firmware enables the driver to retrieve firmware logs via the host bus (SDIO or SPI). There are two modes of operation: 1. On-demand: The FW collects its log in an internal ring buffer. This buffer can later be read, for example, upon recovery. 2. Continuous: The FW pushes the FW logs as special packets in the RX path. Reading the internal ring buffer does not involve the FW. Thus, as long as the HW is not in ELP, it should be possible to read the logs, even if the FW crashes. A sysfs binary file named "fwlog" was added to support this feature, letting a monitor process read the FW messages. The log is transferred from the FW only when available, so the reading process might block. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: add automatic rx streaming triggersEliad Peller2011-06-271-0/+5
| | | | | | | | | | | | When rx_streaming.interval is non-zero, use automatic rx streaming. Enable rx streaming on the each rx/tx packet, and disable it rx_streaming.duration msecs later. When rx_streaming.always=0 (default), rx streaming is enabled only when there is a coex operation. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: add support for rx streamingEliad Peller2011-06-271-0/+25
| | | | | | | | | | | | wl12xx supports the "rx streaming" feature: When in ps mode, and @timeout msecs have been passed since the last rx/tx, it issues trigger packets (QoS-null/PS-Poll packets, according to the ac type) in const intervals (in order to reduce the rx time). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: add separate config value for DFS dwell time on sched scanLuciano Coelho2011-05-311-0/+3
| | | | | | | | | | | | | Use a different value for DFS dwell time when performing a scheduled scan. Previously we were using the same value as for normal passive scans. This adds some flexibility between these two different types of passive scan. For now we use 150 TUs for DFS channel dwell time. This may need to be fine-tuned in the future. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵John W. Linville2011-05-161-28/+83
|\ | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-agn-tx.c net/mac80211/sta_info.h
| * wl12xx: add configuration values for scheduled scanLuciano Coelho2011-05-131-0/+21
| | | | | | | | | | | | | | Add the structures and values for driver-configured scheduled scan parameters. Signed-off-by: Luciano Coelho <coelho@ti.com>
| * Revert "wl12xx: support FW TX inactivity triggers"Luciano Coelho2011-05-021-10/+2
| | | | | | | | | | | | | | | | | | This reverts commit 47684808fd89d6809c0886e06f8ac324252499d8. Conflicts: drivers/net/wireless/wl12xx/conf.h drivers/net/wireless/wl12xx/main.c
| * wl12xx: AP-mode - overhaul rate policy configurationArik Nemtsov2011-05-021-16/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the minimal rate configured in the basic rates set as the AP broadcast and multicast rate. The minimal rate is used to ensure weak links can still communicate. When the basic rates contains at least one OFDM rate, configure all unicast TX rates to OFDM only. Unify rate configuration on initialization and on change notification into a single function. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
| * wl12xx: add BT-coexistance for APArik Nemtsov2011-05-021-2/+33
| | | | | | | | | | | | | | | | Initialize AP specific BT coexitance parameters to default values and enable them in AP mode. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
| * wl12xx: FM WLAN coexistenceShahar Levi2011-05-021-0/+14
| | | | | | | | | | | | | | | | | | Add support to FM WLAN coexistence (STA only). Some WiFi harmonics may interfere with FM operation, to avoid this problem special coexistence techniques are activated around some FM frequencies. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
| * wl12xx: configure rates when working in ibss modeEliad Peller2011-05-021-0/+7
| | | | | | | | | | | | | | | | | | | | | | When working in ibss mode, we don't configure rate policy per station (as we use the same link for multiple stations), so currently the 1mb/s rate is being used. Instead, configure the firmware to use the whole 11b rates by default. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* | Merge branch 'master' of ↵John W. Linville2011-05-051-13/+16
|\ \ | |/ | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/libertas/if_cs.c drivers/net/wireless/rtlwifi/pci.c net/bluetooth/l2cap_sock.c
| * wl12xx: support FW TX inactivity triggersArik Nemtsov2011-04-281-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In AP mode we register for the MAX_TX_RETRY and INACTIVE_STA events. Both are reported to the upper layers as a TX failure in the offending stations. In STA mode we register only for the MAX_TX_RETRY event. A TX failure is interpreted as a loss of connection. Support for IEEE80211_HW_REPORTS_TX_ACK_STATUS has been removed to avoid the inherent race condition of a mac80211 TX failure counter in addition to the FW counter. This patch depends on "mac80211: allow low level driver to report packet loss" Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl12xx: remove unused conf_radio_params structureLuciano Coelho2011-04-191-9/+0
| | | | | | | | | | | | | | This structure has not been used anymore since commit e6b190ff3c2f4e4859502c41fa17b5c595e82000. Signed-off-by: Luciano Coelho <coelho@ti.com>
| * wl12xx: move hardcoded hci_io_ds value into the conf structLuciano Coelho2011-04-191-0/+1
| | | | | | | | | | | | | | | | | | Instead of hardcoding the hci_io_ds configuration that we write to the SDIO_IO_DS top registed, read it from the default configuration so that it's easier to change for different platforms. Reported-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
| * wl12xx: 1281/1283 support - use dynamic memory for the RX/TX poolsShahar Levi2011-04-191-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Separate the memory configuration to chip-specific structures and implement dynamic memory for wl128x. This feature allows us to move TX memory blocks to the RX pool when the RX path is overloaded. Thanks for Arik Nemtsov <arik@wizery.com> for helping simplify the wl1271_fw_status() code. [Rewrote the commit subject and message for clarity; improved some comments and changed "spare" to "padding" for consistency; added a FIXME for the AP memory configuration -- Luca] Signed-off-by: Shahar Levi <shahar_levi@ti.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
| * wl12xx: 1281/1283 support - Add DefinitionsShahar Levi2011-04-191-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Definitions to support wl128x: - New FW file name - Chip ID - New PLL Configuration Algorithm macros that will be used at wl128x boot stage - Rename NVS macro name: wl127x and wl128x are using the same NVS file name. However, the ini parameters between them are different. The driver will validate the correct NVS size in wl1271_boot_upload_nvs(). [Cleaned up some of the definitions. -- Luca] Signed-off-by: Shahar Levi <shahar_levi@ti.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* | Fix common misspellingsLucas De Marchi2011-03-311-4/+4
|/ | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* wl12xx: use the conf struct instead of macros for memory configurationEliad Peller2011-02-081-0/+12
| | | | | | | | | make the configuration management more flexible by using the conf struct, rather than predefined macros. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: move to new firmware (6.1.3.50.49)Eliad Peller2011-02-081-0/+29
| | | | | | | | | | | | | | | This patch adds support for the new wl12xx firmware (Rev 6.1.3.50.49) Since this fw is not backward compatible with previous fw versions, a new fw (with different name) is being fetched. (the patch is big because it contains all the required fw api changes. splitting it into multiple patches will result in corrupted intermediate commits) Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: mcp2.5 - add config_ps acxEliad Peller2011-02-081-0/+8
| | | | | | | | | mcp2.5 uses this acx to configure the fw only once, rather than passing the params in every enter psm command. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: Increase scan channel dwell time for passive scansJuuso Oikarinen2011-01-241-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The passive scan channel dwell time currently used is 30-60TU. A typical beacon interval for AP's is 100TU. This leads to a ~30% worst-case probability of finding an AP via passive scanning. For 5GHz bands for DFS frequencies passive scanning is the only scanning option. Hence for these, the probability of finding an AP is very low. To fix this, increase the passive channel scan dwell times (also the early leave value, as 5GHz channels are still typically very silent.) Use a value of 100TU, because that covers most typical AP configurations. Based on testing the probability of finding an AP (100TU beacon interval) on a single scan round are as follows (based on 100 iterations): dwell min/max (TU) | probability ---------------------+------------ 30/60 | 35% 60/60 | 56% 80/80 | 77% 100/100 | 100% Total scan times now and after the change: Region | Before (s) | After (s) -------+------------+---------- 00 | 0.77 | 1.48 FI | 0.95 | 2.01 US | 0.91 | 1.76 Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: BA initiator supportLevi, Shahar2011-01-241-0/+6
| | | | | | | | | | Add 80211n BA initiator session support wl1271 driver. Include BA supported FW version auto detection mechanism. BA initiator session management included in FW independently. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: AP mode - AP specific CMD_CONFIGURE sub-commandsArik Nemtsov2011-01-241-0/+6
| | | | | | | | | Add AP max retries and rate policy configuration. Rename STA rate policy configuration function. Signed-off-by: Arik Nemtsov <arik@wizery.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl12xx: Add AP related configuration to conf_drv_settingsArik Nemtsov2011-01-241-2/+44
| | | | | | | | | Rate class configuration has been split up for AP and STA modes. Template related configuration likewise separated. Signed-off-by: Arik Nemtsov <arik@wizery.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
* wl1271: Change wl12xx Files NamesShahar Levi2010-11-221-0/+1105
All files name prefix removed due to the fact that wl12xx driver supports wl1271 and wl1273. Also the definition in Kconfig and header files changed respectively. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
OpenPOWER on IntegriCloud