summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/rt2x00/rt2400pci.c
Commit message (Collapse)AuthorAgeFilesLines
* rt2x00: Include ATIM queue support in rt2x00queue_get_tx_queue.Gertjan van Wingerde2011-03-041-1/+1
| | | | | | | | | | | | | | | The ATIM queue is considered to be a TX queue by the drivers that support the queue. Therefore include support for the ATIM queue to the rt2x00queue_get_tx_queue function so that the drivers that support the ATIM queue can also use that function. Add the support in such a way that drivers that do not support the ATIM queue are not penalized in their efficiency. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Don't treat ATIM queue as second beacon queue.Gertjan van Wingerde2011-03-041-3/+3
| | | | | | | | | | | | Current code for the atim queue is strange, as it is considered in the rt2x00_dev structure as a second beacon queue. Normalize this by letting the atim queue have its own struct data_queue pointer in the rt2x00_dev structure. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Revise irqmask locking for PCI devicesHelmut Schaa2011-03-041-9/+6
| | | | | | | | | | | The PCI device irqmask is locked by a spin_lock. Currently spin_lock_irqsave is used everywhere. To reduce the locking overhead replace spin_lock_irqsave in hard irq context with spin_lock and in soft irq context with spin_lock_irq. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Move TX descriptor field "ifs" into plcp substructHelmut Schaa2011-03-041-1/+1
| | | | | | | | | | "ifs" is only used by no-HT devices. Move it into the plcp substruct and fill in the value only for no-HT devices. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Optimize TX descriptor handlingHelmut Schaa2011-03-041-4/+6
| | | | | | | | | | | | | | | HT and no-HT rt2x00 devices use a partly different TX descriptor. Optimize the tx desciptor memory layout by putting the PLCP and HT substructs into a union and introduce a new driver flag to decide which TX desciptor format is used by the device. This saves us the expensive PLCP calculation fOr HT devices and the HT descriptor setup on no-HT devices. Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Generate sw sequence numbers only for devices that need itHelmut Schaa2011-03-041-0/+1
| | | | | | | | | | | | | | | Newer devices like rt2800* own a hardware sequence counter and thus don't need to use a software sequence counter at all. Add a new driver flag to shortcut the software sequence number generation on devices that don't need it. rt61pci, rt73usb and rt2800* seem to make use of a hw sequence counter while rt2400pci and rt2500* need to do it in software. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Trivial typo fix in commentMark Einon2011-01-311-1/+1
| | | | | | | | | Fixing a trivial comment typo. Signed-off-by: Mark Einon <mark.einon@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Remove STATE_RADIO_IRQ_OFF_ISR and STATE_RADIO_IRQ_ON_ISRHelmut Schaa2011-01-311-4/+1
| | | | | | | | | | Remove STATE_RADIO_IRQ_OFF_ISR and STATE_RADIO_IRQ_ON_ISR as they are not used anymore. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Convert rt2400pci interrupt handling to use taskletsHelmut Schaa2011-01-311-39/+115
| | | | | | | | | | | | | | | | | | | | | | Fix interrupt processing on slow machines by using individual tasklets for each different device interrupt. This ensures that while a RX or TX status tasklet is scheduled only the according device interrupt is masked and other interrupts such as TBTT can still be processed. Also, this allows us to use tasklet_hi_schedule for TBTT processing which is required to not send out beacons with a wrong DTIM count (due to delayed periodic beacon updates). Furthermore, this improves the latency between the TBTT and sending out buffered multi- and broadcast traffic. As a nice bonus, the interrupt handling overhead should be much lower. Compile-tested only. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Refactor beacon code to make use of start- and stop_queueHelmut Schaa2011-01-311-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows to dynamically remove beaconing interfaces without shutting beaconing down on all interfaces. The only place to start and stop beaconing are now the start- and stop_queue callbacks. Hence, we can remove some register writes during interface bring up (config_intf) and only write the correct sync mode to the register there. When multiple beaconing interfaces are present we should enable beaconing as soon as mac80211 enables beaconing on at least one of them. The beacon queue gets stopped when the last beaconing interface was stopped by mac80211. Therefore, introduce another interface counter to keep track ot the number of enabled beaconing interfaces and start or stop the beacon queue accordingly. To allow single interfaces to stop beaconing, add a new driver callback clear_beacon to clear a single interface's beacon without affecting the other interfaces. Don't overload the clear_entry callback for clearing beacons as that would introduce additional overhead (check for each TX queue) into the clear_entry callback which is used on the drivers TX/RX hotpaths. Furthermore, the write beacon callback doesn't need to enable beaconing anymore but since beaconing should be disabled while a new beacon is written or cleared we still disable beacon generation and enable it afterwards again in the driver specific callbacks. However, beacon related interrupts should not be disabled/enabled here, that's solely done from the start- and stop queue callbacks. It would be nice to stop the beacon queue just before the beacon update and enable it afterwards in rt2x00queue itself instead of the current implementation that relies on the driver doing the right thing. However, since start- and stop_queue are mutex protected we cannot use them for atomic beacon updates. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix WMM Queue namingIvo van Doorn2010-12-131-6/+6
| | | | | | | | | | | | | | | | | The Queue names were incorrectly copied from the legacy drivers, as a result the queue names were inversed to what was expected. This renames the queues using this mapping: QID_AC_BK -> QID_AC_VO (priority 0) QID_AC_BE -> QID_AC_VI (priority 1) QID_AC_VI -> QID_AC_BE (priority 2) QID_AC_VO -> QID_AC_BK (priority 3) Note that this was a naming problem only, which didn't affect the assignment of frames to their respective queues. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Reorganize queue callback functionsIvo van Doorn2010-12-131-8/+3
| | | | | | | | | | | | | | | As part of the queue refactoring, change the queue callback function names to have 3 different actions: start, kick & stop. We can now also remove the STATE_RADIO_RX_ON/STATE_RADIO_RX_OFF device_state flags, and replace the usage with using the start_queue/stop_queue callback functions. This streamlines the RX queue handling to the similar approach as all other queues. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Introduce 3 queue commands in drivers (start, kick, stop).Ivo van Doorn2010-12-131-44/+87
| | | | | | | | | | | | | | | | | | | | | | | | | As part of the queue refactoring, we now introduce 3 queue commands: start, kick, stop. - Start: will enable a queue, for TX this will not mean anything, while for beacons and RX this will update the registers to enable the queue. - Kick: This will kick all pending frames to the hardware. This is needed for the TX queue to push all frames to the HW after the queue has been started - Stop: This will stop the queue in the hardware, and cancel any pending work (So this doesn't mean the queue is empty after a stop!). Move all code from the drivers into the appropriate functions, and link those calls to the old rt2x00lib callback functions (we will fix this later when we refactor the queue control inside rt2x00lib). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Don't frequently reset beacon interval in AdHoc modeHelmut Schaa2010-12-131-1/+5
| | | | | | | | | | | | | | | | | Commit 0204464329c17ba6d293e1899f71223599a0e582 "Check for specific changed flags when updating the erp config" changed the way in which a new beacon interval gets handled. However, due to a bug in rt2800usb and rt2800pci the beacon interval was reset during each scan, thus causing problems in AdHoc mode. Fix this by not cleaning up the beacon interval when killing the beacon queue but just prevent the device from sending out beacons. Reported-by: Wolfgang Kufner <wolfgang.kufner@gmail.com> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Remove rt2x00lib_toggle_rxIvo van Doorn2010-11-151-4/+1
| | | | | | | | | | | | | | | As part of the queue refactoring, the rt2x00lib_toggle_rx can be removed and replaced with the call directly to the set_device_state callback function. We can remove the STATE_RADIO_RX_ON_LINK and STATE_RADIO_RX_OFF_LINK, as it was only used for special behavior inside rt2x00lib rather then the drivers. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Implement flush callbackIvo van Doorn2010-11-151-0/+1
| | | | | | | | | | | | | | | Implement a basic flush callback function, which simply loops over all TX queues and waits until all frames have been transmitted and the status reports have been gathered. At this moment we don't support dropping any frames during the flush, but mac80211 will only send 'false' for this argument anyway, so this is not important at this time. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Sync Tx and RX ring sizes with legacy driversHelmut Schaa2010-11-151-4/+4
| | | | | | | | | | | | | | | | | All rt2x00 devices used the same Tx and Rx ring size (24 entries) till now. Newer devices (like rt2800) can however make use of a larger TX and RX ring due to 11n capabilities (AMPDUs of size 64 for example). Hence, bring rt2x00 in sync with the legacy drivers and use the same TX and RX ring sizes. Also remove the global defines RX_ENTRIES, TX_ENTRIES, BEACON_ENTRIES and ATIM_ENTRIES and use per driver values. That is 24 entries for rt2400pci, 32 entries for rt2500pci, rt2500usb, rt61pci and rt73usb and 128 (RX) and 64 (TX) for rt2800pci and rt2800usb. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵John W. Linville2010-10-151-1/+1
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
| * rt2x00: Simplify Queue function argumentsIvo van Doorn2010-10-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A lot of functions accept a struct rt2x00_dev combined with either a struct queue_entry or struct data_queue argument. This can be simplified by only passing on the queue/entry argument. In cases where rt2x00_dev and a sk_buff are send together, we can send the queue_entry instead. rt2x00usb_alloc_urb and rt2x00usb_free_urb have a bit of vague naming. Instead they allocate all the data which belongs to a rt2x00 data queue entry. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'master' of ↵John W. Linville2010-09-211-50/+64
|\ \ | |/ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: arch/arm/mach-omap2/board-omap3pandora.c drivers/net/wireless/ath/ath5k/base.c
| * rt2x00: Check for specific changed flags when updating the erp configHelmut Schaa2010-09-141-50/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously rt2x00 was always updating all erp related config variables even though mac80211 might only have changed one. Hence, pass the changed flags to the config_erp driver callback so that the driver can limit the changes to the correct values. This fixes an issue in AP mode where the beacon interval is not initialized (and thus zero) but still sent to the hardware causing an interrupt storm on rt2800pci hanging the system. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'master' of ↵John W. Linville2010-09-021-15/+16
|\ \ | |/ | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
| * rt2x00: Fix max TX power settingsIvo van Doorn2010-08-251-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During initialization each driver reads the default TX power for each individual channel. However mac80211 only accepts the maximum value (which is also handled as default value). As a result, the TX power of the device was being limited to the default value, which is often quite low compared to the real maximum acceptable value. This patch allows each driver to set the maximum value on a per-channel basis which is forwarded to mac80211. The default value will be preserved for now, in case we want to update mac80211 to differentiate between the maximum and default txpower. This fixes bug complaining about limited TX power values like: https://bugzilla.kernel.org/show_bug.cgi?id=16358 Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: Simplify arguments to rt2x00 driver callback functionsIvo van Doorn2010-08-251-13/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | write_tx_desc shouldn't pass a rt2x00dev and skb pointer, instead it should use the same format as other TX frame callback functions, which is passing the data_entry pointer which contains all the information which is needed to work on a TX frame. Most callers of the kick_tx_queue and kill_tx_queue already have the data_queue pointer, so rather then sending the QID with the given function, when the driver requests a new pointer to the data_queue, it is more efficient to just send the data_queue pointer directly. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | drivers/net: Convert unbounded kzalloc calls to kcallocJoe Perches2010-08-171-1/+1
|/ | | | | | | | | | | | | These changes may be slightly safer in some instances. There are other kzalloc calls with a multiply, but those calls are typically "small fixed #" * sizeof(some pointer)" and those are not converted. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* rt2x00: Remove set_tim callback from PCI driversHelmut Schaa2010-07-121-1/+0
| | | | | | | | | | | | | | | | | | Using the set_tim callback without managing the DTIM count and the broad- and multicast buffering in hw, fw or the driver results in wrong DTIM count values being sent out in beacons. Since all PCI drivers fetch new beacons periodically and hence get an updated TIM we can just remove the set_tim callback from these. The rt2x00 USB drivers don't update the beacon periodically and thus rely on the set_tim callback to get a correct TIM for beacon transmission. USB devices still suffer from the DTIM count being wrong under some circumstances but removing the set_tim callback from these would cause more harm then good. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Convert rt2x00 to use threaded interruptsHelmut Schaa2010-07-121-16/+38
| | | | | | | | | | | | | | | | | Use threaded interrupts for all rt2x00 PCI devices. This has several generic advantages: - Reduce the time we spend in hard irq context - Use non-atmic mac80211 functions for rx/tx Furthermore implementing broad- and multicast buffering will be much easier in process context while maintaining low latency and updating the beacon just before transmission (pre tbtt interrupt) can also be done in process context. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix vgc_level_reg handlingIvo van Doorn2010-07-121-3/+5
| | | | | | | | | | | | | | Currently vgc_level_reg and vgc_level are equal to eachother, while the purpose of vgc_level_reg is the value last written to the register and is remembered through link tuning resets. The vgc_level is the currently active level, which is reset during link tuning resets. The usage of these variables depends on the drivers, some drivers need both, while others need only one of the two. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Disable link tuning while scanningIvo van Doorn2010-07-121-0/+2
| | | | | | | | | While scanning the link tuner must be disabled. Otherwise it will interfere with receiving all beacons for each channel due to changing sensitivity levels. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Rename CONFIG_DISABLE_LINK_TUNINGIvo van Doorn2010-07-121-2/+2
| | | | | | | | | | | | | Rename CONFIG_DISABLE_LINK_TUNING to DRIVER_SUPPORT_LINK_TUNING Link tuning support is not only based on EEPROM decisions, but also if the device actually supports it. Currently only rt2500usb doesn't support link tuning because of hardware problems. But rt2800usb is also suspected of having problems with link tuning. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Move common txdone handling to rt2x00lib_txdone.Gertjan van Wingerde2010-06-301-1/+1
| | | | | | | | | | Now that the write_tx_data functions are merged, also merge the relevant parts of the txdone handling into common code, rather than {usb,pci} specific code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Merge PCI and USB versions of write_tx_data into single function.Gertjan van Wingerde2010-06-301-1/+0
| | | | | | | | | Now that rt2x00pci_write_tx_data and rt2x00usb_write_tx_data are similar we can merge them in a single function in rt2x00queue.c. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Properly reserve room for descriptors in skbs.Gertjan van Wingerde2010-06-031-1/+1
| | | | | | | | | | Instead of fiddling with the skb->data pointer and thereby risking out of bounds accesses, properly reserve the space needed in an skb for descriptors. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
* rt2x00: Push beacon TX descriptor writing to drivers.Gertjan van Wingerde2010-06-031-6/+9
| | | | | | | | | | Not all the devices require a TX descriptor to be written (i.e. rt2800 device don't require them). Push down the creation of the TX descriptor to the device drivers so that they can decide for themselves whether a TX descriptor is to be created. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
* rt2x00: Fix failed SLEEP->AWAKE and AWAKE->SLEEP transitions.Gertjan van Wingerde2010-05-241-4/+5
| | | | | | | | | | | | | (Based on a patch created by Ondrej Zary) In some circumstances the Ralink devices do not properly go to sleep or wake up, with timeouts occurring. Fix this by retrying telling the device that it has to wake up or sleep. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵John W. Linville2010-05-171-12/+14
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
| * rt2x00: Simplify TXD handling of beacons.Gertjan van Wingerde2010-05-121-12/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | The handling of tx descriptors for beacons can be simplified by updating write_tx_desc implementations of each driver to write directly to the queue entry descriptor instead of to a provided memory area. This is also a preparation for further clean ups where descriptors are properly reserved in the skb instead of fiddling with the skb data pointer. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: Re-order tx descriptor writing code in drivers.Gertjan van Wingerde2010-05-121-0/+5
| | | | | | | | | | | | | | | | | | | | | | Where possible, write the tx descriptor words from start to end, to follow a logical ordering of words. Where this is not possible (in rt2400pci, rt2500pci and rt61pci) add a comment as to why word 0 needs to be written last. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'master' of ↵John W. Linville2010-05-111-12/+10
|\ \ | |/ | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/ath/ar9170/main.c
| * rt2x00: provide beacon's txdesc to write_beacon callback function.Gertjan van Wingerde2010-05-101-1/+2
| | | | | | | | | | | | | | | | Preparation to fix rt2800 beaconing. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: Clean up all driver's kick_tx_queue callback functions.Gertjan van Wingerde2010-05-101-11/+8
| | | | | | | | | | | | | | | | | | | | | | | | All of the driver's kick_tx_queue callback functions treat the TX queue for beacons in a special manner. Clean this up by integrating the kicking of the beacon queue into the write_beacon callback function, and let the generic code no longer call the kick_tx_queue callback function when updating the beacon. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'master' of ↵John W. Linville2010-05-051-2/+2
|\ \ | |/ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/libertas_tf/cmd.c drivers/net/wireless/libertas_tf/main.c
| * rt2x00: Register frame length in TX entry descriptor instead of L2PAD.Gertjan van Wingerde2010-05-041-2/+2
| | | | | | | | | | | | | | | | And use it consistently in the chipset drivers. Preparation for further clean ups. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'master' of ↵John W. Linville2010-04-151-0/+4
|\ \ | |/ | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wireless/ath/ath5k/phy.c drivers/net/wireless/wl12xx/wl1271_main.c
| * rt2x00: Disable auto wakeup before waking up device.Gertjan van Wingerde2010-04-061-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | In all drivers ensure that auto wakeup is disabled before waking up the device. This is needed to prevent connection stability issues and problems in waking up the device. Based upon a patch from Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* Merge branch 'master' of ↵David S. Miller2010-02-251-2/+2
|\ | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-core.h drivers/net/wireless/rt2x00/rt2800pci.c
| * rt2x00: rework RT chipset and revision determination for PCI an SOC devices.Gertjan van Wingerde2010-02-151-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The recent rt2800 devices are no longer really identified by their PCI ID's, but rather by the contents of their CSR0 register. Also for the other chipsets is the contents of this CSR0 register important. Change the chipset determination logic to be more aligned with the rt2800 model. Preparation for the support of rt3070 / rt3090 based devices. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: Reorganize RT chipset setting for PCI/SOC devices.Gertjan van Wingerde2010-02-151-2/+7
| | | | | | | | | | | | | | | | | | | | | | Don't set the RT chipset for a device from within the generic PCI/SOC code, but rather from the individual drivers, so that individual drivers have more control over what RT chipset is set. Preparation for chip handling updates for rt2800 devices. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'master' of ↵David S. Miller2010-02-141-1/+0
|\ \ | |/ | | | | ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
OpenPOWER on IntegriCloud