summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
Commit message (Collapse)AuthorAgeFilesLines
* Revert "net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager"Bodong Wang2019-02-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 4e046de0f50e04acd48eb373d6a9061ddf014e0c ] This reverts commit 5f5991f36dce1e69dd8bd7495763eec2e28f08e7. With the original commit, eswitch instance will not be initialized for a function which is vport group manager but not eswitch manager such as host PF on SmartNIC (BlueField) card. This will result in a kernel crash when such a vport group manager is trying to access vports in its group. E.g, PF vport manager (not eswitch manager) tries to configure the MAC of its VF vport, a kernel trace will happen similar as bellow: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 ... RIP: 0010:mlx5_eswitch_get_vport_config+0xc/0x180 [mlx5_core] ... Fixes: 5f5991f36dce ("net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager") Signed-off-by: Bodong Wang <bodong@mellanox.com> Reported-by: Yuval Avnery <yuvalav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx5e: Allow MAC invalidation while spoofchk is ONAya Levin2019-02-061-12/+6
| | | | | | | | | | | | | | | | [ Upstream commit 9d2cbdc5d334967c35b5f58c7bf3208e17325647 ] Prior to this patch the driver prohibited spoof checking on invalid MAC. Now the user can set this configuration if it wishes to. This is required since libvirt might invalidate the VF Mac by setting it to zero, while spoofcheck is ON. Fixes: 1ab2068a4c66 ("net/mlx5: Implement vports admin state backup/restore") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ucc_geth: Reset BQL queue when stopping deviceMathias Thore2019-02-061-0/+2
| | | | | | | | | | | | | | [ Upstream commit e15aa3b2b1388c399c1a2ce08550d2cc4f7e3e14 ] After a timeout event caused by for example a broadcast storm, when the MAC and PHY are reset, the BQL TX queue needs to be reset as well. Otherwise, the device will exhibit severe performance issues even after the storm has ended. Co-authored-by: David Gounaris <david.gounaris@infinera.com> Signed-off-by: Mathias Thore <mathias.thore@infinera.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ravb: expand rx descriptor data to accommodate hw checksumSimon Horman2019-02-061-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 12da64300fbc76b875900445f4146c3dc617d43e ] EtherAVB may provide a checksum of packet data appended to packet data. In order to allow this checksum to be received by the host descriptor data needs to be enlarged by 2 bytes to accommodate the checksum. In the case of MTU-sized packets without a VLAN tag the checksum were already accommodated by virtue of the space reserved for the VLAN tag. However, a packet of MTU-size with a VLAN tag consumed all packet data space provided by a descriptor leaving no space for the trailing checksum. This was not detected by the driver which incorrectly used the last two bytes of packet data as the checksum and truncate the packet by two bytes. This resulted all such packets being dropped. A work around is to disable RX checksum offload # ethtool -K eth0 rx off This patch resolves this problem by increasing the size available for packet data in RX descriptors by two bytes. Tested on R-Car E3 (r8a77990) ES1.0 based Ebisu-4D board v2 * Use sizeof(__sum16) directly rather than adding a driver-local #define for the size of the checksum provided by the hw (2 bytes). Fixes: 4d86d3818627 ("ravb: RX checksum offload") Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx4_core: Add masking for a few queries on HCA capsAya Levin2019-02-061-29/+46
| | | | | | | | | | | | | | | | | [ Upstream commit a40ded6043658444ee4dd6ee374119e4e98b33fc ] Driver reads the query HCA capabilities without the corresponding masks. Without the correct masks, the base addresses of the queues are unaligned. In addition some reserved bits were wrongly read. Using the correct masks, ensures alignment of the base addresses and allows future firmware versions safe use of the reserved bits. Fixes: ab9c17a009ee ("mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet") Fixes: 0ff1fb654bec ("{NET, IB}/mlx4: Add device managed flow steering firmware API") Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: sun: cassini: Cleanup license conflictThomas Gleixner2019-01-312-28/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 56cb4e5034998b5522a657957321ca64ca2ea0a0 upstream. The recent addition of SPDX license identifiers to the files in drivers/net/ethernet/sun created a licensing conflict. The cassini driver files contain a proper license notice: * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. but the SPDX change added: SPDX-License-Identifier: GPL-2.0 So the file got tagged GPL v2 only while in fact it is licensed under GPL v2 or later. It's nice that people care about the SPDX tags, but they need to be more careful about it. Not everything under (the) sun belongs to ... Fix up the SPDX identifier and remove the boiler plate text as it is redundant. Fixes: c861ef83d771 ("sun: Add SPDX license tags to Sun network drivers") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Shannon Nelson <shannon.nelson@oracle.com> Cc: Zhu Yanjun <yanjun.zhu@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Acked-by: Shannon Nelson <shannon.lee.nelson@gmail.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mlxsw: pci: Ring CQ's doorbell before RDQ'sIdo Schimmel2019-01-312-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a packet should be trapped to the CPU the device consumes a WQE (work queue element) from an RDQ (receive descriptor queue) and copies the packet to the address specified in the WQE. The device then tries to post a CQE (completion queue element) that contains various metadata (e.g., ingress port) about the packet to a CQ (completion queue). In case the device managed to consume a WQE, but did not manage to post the corresponding CQE, it will get stuck. This unlikely situation can be triggered due to the scheme the driver is currently using to process CQEs. The driver will consume up to 512 CQEs at a time and after processing each corresponding WQE it will ring the RDQ's doorbell, letting the device know that a new WQE was posted for it to consume. Only after processing all the CQEs (up to 512), the driver will ring the CQ's doorbell, letting the device know that new ones can be posted. Fix this by having the driver ring the CQ's doorbell for every processed CQE, but before ringing the RDQ's doorbell. This guarantees that whenever we post a new WQE, there is a corresponding CQE available. Copy the currently processed CQE to prevent the device from overwriting it with a new CQE after ringing the doorbell. Note that the driver still arms the CQ only after processing all the pending CQEs, so that interrupts for this CQ will only be delivered after the driver finished its processing. Before commit 8404f6f2e8ed ("mlxsw: pci: Allow to use CQEs of version 1 and version 2") the issue was virtually impossible to trigger since the number of CQEs was twice the number of WQEs and the number of CQEs processed at a time was equal to the number of available WQEs. Fixes: 8404f6f2e8ed ("mlxsw: pci: Allow to use CQEs of version 1 and version 2") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Semion Lisyansky <semionl@mellanox.com> Tested-by: Semion Lisyansky <semionl@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mlxsw: spectrum_fid: Update dummy FID indexNir Dotan2019-01-311-2/+2
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit a11dcd6497915ba79d95ef4fe2541aaac27f6201 ] When using a tc flower action of egress mirred redirect, the driver adds an implicit FID setting action. This implicit action sets a dummy FID to the packet and is used as part of a design for trapping unmatched flows in OVS. While this implicit FID setting action is supposed to be a NOP when a redirect action is added, in Spectrum-2 the FID record is consulted as the dummy FID index is an 802.1D FID index and the packet is dropped instead of being redirected. Set the dummy FID index value to be within 802.1Q range. This satisfies both Spectrum-1 which ignores the FID and Spectrum-2 which identifies it as an 802.1Q FID and will then follow the redirect action. Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC") Signed-off-by: Nir Dotan <nird@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mlxsw: pci: Increase PCI SW reset timeoutNir Dotan2019-01-311-1/+1
| | | | | | | | | | | | | | | | [ Upstream commit d2f372ba0914e5722ac28e15f2ed2db61bcf0e44 ] Spectrum-2 PHY layer introduces a calibration period which is a part of the Spectrum-2 firmware boot process. Hence increase the SW timeout waiting for the firmware to come out of boot. This does not increase system boot time in cases where the firmware PHY calibration process is done quickly. Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC") Signed-off-by: Nir Dotan <nird@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* amd-xgbe: Fix mdio access for non-zero ports and clause 45 PHYsLendacky, Thomas2019-01-312-8/+16
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 5ab3121beeb76aa6090195b67d237115860dd9ec ] The XGBE hardware has support for performing MDIO operations using an MDIO command request. The driver mistakenly uses the mdio port address as the MDIO command request device address instead of the MDIO command request port address. Additionally, the driver does not properly check for and create a clause 45 MDIO command. Check the supplied MDIO register to determine if the request is a clause 45 operation (MII_ADDR_C45). For a clause 45 operation, extract the device address and register number from the supplied MDIO register and use them to set the MDIO command request device address and register number fields. For a clause 22 operation, the MDIO request device address is set to zero and the MDIO command request register number is set to the supplied MDIO register. In either case, the supplied MDIO port address is used as the MDIO command request port address. Fixes: 732f2ab7afb9 ("amd-xgbe: Add support for MDIO attached PHYs") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* e1000e: allow non-monotonic SYSTIM readingsMiroslav Lichvar2019-01-261-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit e1f65b0d70e9e5c80e15105cd96fa00174d7c436 ] It seems with some NICs supported by the e1000e driver a SYSTIM reading may occasionally be few microseconds before the previous reading and if enabled also pass e1000e_sanitize_systim() without reaching the maximum number of rereads, even if the function is modified to check three consecutive readings (i.e. it doesn't look like a double read error). This causes an underflow in the timecounter and the PHC time jumps hours ahead. This was observed on 82574, I217 and I219. The fastest way to reproduce it is to run a program that continuously calls the PTP_SYS_OFFSET ioctl on the PHC. Modify e1000e_phc_gettime() to use timecounter_cyc2time() instead of timecounter_read() in order to allow non-monotonic SYSTIM readings and prevent the PHC from jumping. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ixgbe: allow IPsec Tx offload in VEPA modeShannon Nelson2019-01-261-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 7fa57ca443cffe81ce8416b57966bfb0370678a1 ] When it's possible that the PF might end up trying to send a packet to one of its own VFs, we have to forbid IPsec offload because the device drops the packets into a black hole. See commit 47b6f50077e6 ("ixgbe: disallow IPsec Tx offload when in SR-IOV mode") for more info. This really is only necessary when the device is in the default VEB mode. If instead the device is running in VEPA mode, the packets will go through the encryption engine and out the MAC/PHY as normal, and get "hairpinned" as needed by the switch. So let's not block IPsec offload when in VEPA mode. To get there with the ixgbe device, use the handy 'bridge' command: bridge link set dev eth1 hwmode vepa Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* r8169: Add support for new Realtek EthernetKai-Heng Feng2019-01-261-0/+2
| | | | | | | | | | | | [ Upstream commit 36352991835ce99e46b4441dd0eb6980f9a83e8f ] There are two new Realtek Ethernet devices which are re-branded r8168h. Add the IDs to to support them. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mlxsw: spectrum_switchdev: Set PVID correctly during VLAN deletionIdo Schimmel2019-01-261-1/+1
| | | | | | | | | | | | | [ Upstream commit 674bed5df4cab8f96d04f7b99608883a48f9226b ] When a VLAN is deleted from a bridge port we should not change the PVID unless the deleted VLAN is the PVID. Fixes: fe9ccc785de5 ("mlxsw: spectrum_switchdev: Don't batch VLAN operations") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mlxsw: spectrum: Disable lag port TX before removing itJiri Pirko2019-01-261-2/+5
| | | | | | | | | | | | | [ Upstream commit 8adbe212a159d9c78a90fca1d854f6e63452426b ] Make sure that lag port TX is disabled before mlxsw_sp_port_lag_leave() is called and prevent from possible EMAD error. Fixes: 0d65fc13042f ("mlxsw: spectrum: Implement LAG port join/leave") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* r8169: load Realtek PHY driver module before r8169Heiner Kallweit2019-01-221-0/+1
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 11287b693d03830010356339e4ceddf47dee34fa ] This soft dependency works around an issue where sometimes the genphy driver is used instead of the dedicated PHY driver. The root cause of the issue isn't clear yet. People reported the unloading/re-loading module r8169 helps, and also configuring this soft dependency in the modprobe config files. Important just seems to be that the realtek module is loaded before r8169. Once this has been applied preliminary fix 38af4b903210 ("net: phy: add workaround for issue where PHY driver doesn't bind to the device") will be removed. Fixes: f1e911d5d0df ("r8169: add basic phylib support") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* r8169: don't try to read counters if chip is in a PCI power-save stateHeiner Kallweit2019-01-221-2/+4
| | | | | | | | | | | | | | [ Upstream commit 10262b0b53666cbc506989b17a3ead1e9c3b43b4 ] Avoid log spam caused by trying to read counters from the chip whilst it is in a PCI power-save state. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=107421 Fixes: 1ef7286e7f36 ("r8169: Dereference MMIO address immediately before use") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* lan743x: Remove phy_read from link status change functionBryan Whitehead2019-01-221-7/+4
| | | | | | | | | | | | | | | | [ Upstream commit a0071840d2040ea1b27e5a008182b09b88defc15 ] It has been noticed that some phys do not have the registers required by the previous implementation. To fix this, instead of using phy_read, the required information is extracted from the phy_device structure. fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hwIvan Mironov2019-01-131-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 38355a5f9a22bfa5bd5b1bb79805aca39fa53729 upstream. This happened when I tried to boot normal Fedora 29 system with latest available kernel (from fedora rawhide, plus some unrelated custom patches): BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP PTI CPU: 6 PID: 1422 Comm: libvirtd Tainted: G I 4.20.0-0.rc7.git3.hpsa2.1.fc29.x86_64 #1 Hardware name: HP ProLiant BL460c G6, BIOS I24 05/21/2018 RIP: 0010: (null) Code: Bad RIP value. RSP: 0018:ffffa47ccdc9fbe0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000003e8 RCX: ffffa47ccdc9fbf8 RDX: ffffa47ccdc9fc00 RSI: ffff97d9ee7b01f8 RDI: ffff97d9f0150b80 RBP: ffff97d9f0150b80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003 R13: ffff97d9ef1e53e8 R14: 0000000000000009 R15: ffff97d9f0ac6730 FS: 00007f4d224ef700(0000) GS:ffff97d9fa200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000011ece52006 CR4: 00000000000206e0 Call Trace: ? bnx2x_chip_cleanup+0x195/0x610 [bnx2x] ? bnx2x_nic_unload+0x1e2/0x8f0 [bnx2x] ? bnx2x_reload_if_running+0x24/0x40 [bnx2x] ? bnx2x_set_features+0x79/0xa0 [bnx2x] ? __netdev_update_features+0x244/0x9e0 ? netlink_broadcast_filtered+0x136/0x4b0 ? netdev_update_features+0x22/0x60 ? dev_disable_lro+0x1c/0xe0 ? devinet_sysctl_forward+0x1c6/0x211 ? proc_sys_call_handler+0xab/0x100 ? __vfs_write+0x36/0x1a0 ? rcu_read_lock_sched_held+0x79/0x80 ? rcu_sync_lockdep_assert+0x2e/0x60 ? __sb_start_write+0x14c/0x1b0 ? vfs_write+0x159/0x1c0 ? vfs_write+0xba/0x1c0 ? ksys_write+0x52/0xc0 ? do_syscall_64+0x60/0x1f0 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe After some investigation I figured out that recently added cleanup code tries to call VLAN filtering de-initialization function which exist only for newer hardware. Corresponding function pointer is not set (== 0) for older hardware, namely these chips: #define CHIP_NUM_57710 0x164e #define CHIP_NUM_57711 0x164f #define CHIP_NUM_57711E 0x1650 And I have one of those in my test system: Broadcom Inc. and subsidiaries NetXtreme II BCM57711E 10-Gigabit PCIe [14e4:1650] Function bnx2x_init_vlan_mac_fp_objs() from drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h decides whether to initialize relevant pointers in bnx2x_sp_objs.vlan_obj or not. This regression was introduced after v4.20-rc7, and still exists in v4.20 release. Fixes: 04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence.") Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com> Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com> Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: netxen: fix a missing check and an uninitialized useKangjie Lu2019-01-131-1/+2
| | | | | | | | | | | | | [ Upstream commit d134e486e831defd26130770181f01dfc6195f7d ] When netxen_rom_fast_read() fails, "bios" is left uninitialized and may contain random value, thus should not be used. The fix ensures that if netxen_rom_fast_read() fails, we return "-EIO". Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* lan743x: Remove MAC Reset from initializationBryan Whitehead2019-01-131-6/+0
| | | | | | | | | | | | | | [ Upstream commit e0e587878f538c9e3400219b6c516b8199dc2042 ] The MAC Reset was noticed to erase important EEPROM settings. It is also unnecessary since a chip wide reset was done earlier in initialization, and that reset preserves EEPROM settings. There for this patch removes the unnecessary MAC specific reset. Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* vxge: ensure data0 is initialized in when fetching firmware version informationColin Ian King2019-01-131-1/+1
| | | | | | | | | | | | | | | | | | [ Upstream commit f7db2beb4c2c6cc8111f5ab90fc7363ca91107b6 ] Currently variable data0 is not being initialized so a garbage value is being passed to vxge_hw_vpath_fw_api and this value is being written to the rts_access_steer_data0 register. There are other occurrances where data0 is being initialized to zero (e.g. in function vxge_hw_upgrade_read_version) so I think it makes sense to ensure data0 is initialized likewise to 0. Detected by CoverityScan, CID#140696 ("Uninitialized scalar variable") Fixes: 8424e00dfd52 ("vxge: serialize access to steering control register") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* lan743x: Expand phy search for LAN7431Bryan Whitehead2019-01-131-2/+3
| | | | | | | | | | | | | [ Upstream commit 0db7d253e9f0ff1a41c602429bea93df221be6ed ] The LAN7431 uses an external phy, and it can be found anywhere in the phy address space. This patch uses phy address 1 for LAN7430 only. And searches all addresses otherwise. Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: macb: add missing barriers when reading descriptorsAnssi Hannula2019-01-132-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 6e0af298066f3b6d99f58989bb0dca6f764b4c6d ] When reading buffer descriptors on RX or on TX completion, an RX_USED/TX_USED bit is checked first to ensure that the descriptors have been populated, i.e. the ownership has been transferred. However, there are no memory barriers to ensure that the data protected by the RX_USED/TX_USED bit is up-to-date with respect to that bit. Specifically: - TX timestamp descriptors may be loaded before ctrl is loaded for the TX_USED check, which is racy as the descriptors may be updated between the loads, causing old timestamp descriptor data to be used. - RX ctrl may be loaded before addr is loaded for the RX_USED check, which is racy as a new frame may be written between the loads, causing old ctrl descriptor data to be used. This issue exists for both macb_rx() and gem_rx() variants. Fix the races by adding DMA read memory barriers on those paths and reordering the reads in macb_rx(). I have not observed any actual problems in practice caused by these being missing, though. Tested on a ZynqMP based system. Fixes: 89e5785fc8a6 ("[PATCH] Atmel MACB ethernet driver") Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: macb: fix dropped RX frames due to a raceAnssi Hannula2019-01-131-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 8159ecab0db9095902d4c73605fb8787f5c7d653 ] Bit RX_USED set to 0 in the address field allows the controller to write data to the receive buffer descriptor. The driver does not ensure the ctrl field is ready (cleared) when the controller sees the RX_USED=0 written by the driver. The ctrl field might only be cleared after the controller has already updated it according to a newly received frame, causing the frame to be discarded in gem_rx() due to unexpected ctrl field contents. A message is logged when the above scenario occurs: macb ff0b0000.ethernet eth0: not whole frame pointed by descriptor Fix the issue by ensuring that when the controller sees RX_USED=0 the ctrl field is already cleared. This issue was observed on a ZynqMP based system. Fixes: 4df95131ea80 ("net/macb: change RX path for GEM") Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: macb: fix random memory corruption on RX with 64-bit DMAAnssi Hannula2019-01-131-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit e100a897bf9b19089e57f236f2398c9e0538900e ] 64-bit DMA addresses are split in upper and lower halves that are written in separate fields on GEM. For RX, bit 0 of the address is used as the ownership bit (RX_USED). When the RX_USED bit is unset the controller is allowed to write data to the buffer. The driver does not guarantee that the controller already sees the upper half when the RX_USED bit is cleared, possibly resulting in the controller writing an incoming frame to an address with an incorrect upper half and therefore possibly corrupting unrelated system memory. Fix that by adding the necessary DMA memory barrier between the writes. This corruption was observed on a ZynqMP based system. Fixes: fff8019a08b6 ("net: macb: Add 64 bit addressing support for GEM") Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Acked-by: Harini Katakam <harini.katakam@xilinx.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* qed: Fix an error code qed_ll2_start_xmit()Dan Carpenter2019-01-131-0/+1
| | | | | | | | | | | | [ Upstream commit f07d4276892d97671e880190ff195a288b2d8d92 ] We accidentally deleted the code to set "rc = -ENOMEM;" and this patch adds it back. Fixes: d2201a21598a ("qed: No need for LL2 frags indication") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: hns: Fix ping failed when use net bridge and send multicastYonglong Liu2019-01-131-41/+216
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 6adafc356e20189193b38ee6b9af7743078bf6b4 ] Create a net bridge, add eth and vnet to the bridge. The vnet is used by a virtual machine. When ping the virtual machine from the outside host and the virtual machine send multicast at the same time, the ping package will lost. The multicast package send to the eth, eth will send it to the bridge too, and the bridge learn the mac of eth. When outside host ping the virtual mechine, it will match the promisc entry of the eth which is not expected, and the bridge send it to eth not to vnet, cause ping lost. So this patch change promisc tcam entry position to the END of 512 tcam entries, which indicate lower priority. And separate one promisc entry to two: mc & uc, to avoid package match the wrong tcam entry. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: hns: Add mac pcs config when enable|disable macYonglong Liu2019-01-132-4/+11
| | | | | | | | | | | | | | | | [ Upstream commit 726ae5c9e5f0c18eca8ea5296b526242c3e89822 ] In some case, when mac enable|disable and adjust link, may cause hard to link(or abnormal) between mac and phy. This patch adds the code for rx PCS to avoid this bug. Disable the rx PCS when driver disable the gmac, and enable the rx PCS when driver enable the mac. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: hns: Fix ntuple-filters status error.Yonglong Liu2019-01-131-1/+1
| | | | | | | | | | | | | [ Upstream commit 7e74a19ca522aec7c2be201a7ae1d1d57ded409b ] The ntuple-filters features is forced on by chip. But it shows "ntuple-filters: off [fixed]" when use ethtool. This patch make it correct with "ntuple-filters: on [fixed]". Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: hns: Avoid net reset caused by pause frames stormYonglong Liu2019-01-131-2/+10
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit a57275d35576fdd89d8c771eedf1e7cf97e0dfa6 ] There will be a large number of MAC pause frames on the net, which caused tx timeout of net device. And then the net device was reset to try to recover it. So that is not useful, and will cause some other problems. So need doubled ndev->watchdog_timeo if device watchdog occurred until watchdog_timeo up to 40s and then try resetting to recover it. When collecting dfx information such as hardware registers when tx timeout. Some registers for count were cleared when read. So need move this task before update net state which also read the count registers. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: hns: Free irq when exit from abnormal branchYonglong Liu2019-01-131-1/+22
| | | | | | | | | | | | | | | | | [ Upstream commit c82bd077e1ba3dd586569c733dc6d3dd4b0e43cd ] 1.In "hns_nic_init_irq", if request irq fail at index i, the function return directly without releasing irq resources that already requested. 2.In "hns_nic_net_up" after "hns_nic_init_irq", if exceptional branch occurs, irqs that already requested are not release. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: hns: Clean rx fbd when ae stopped.Yonglong Liu2019-01-131-0/+3
| | | | | | | | | | | | | | [ Upstream commit 31f6b61d810654fb3ef43f4d8afda0f44b142fad ] If there are packets in hardware when changing the speed or duplex, it may cause hardware hang up. This patch adds the code to wait rx fbd clean up when ae stopped. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: hns: Fixed bug that netdev was opened twiceYonglong Liu2019-01-131-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 5778b13b64eca5549d242686f2f91a2c80c8fa40 ] After resetting dsaf to try to repair chip error such as ecc error, the net device will be open if net interface is up. But at this time if there is the users set the net device up with the command ifconfig, the net device will be opened twice consecutively. Function napi_enable was called when open device. And Kernel panic will be occurred if it was called twice consecutively. Such as follow: static inline void napi_enable(struct napi_struct *n) { BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state)); smp_mb__before_clear_bit(); clear_bit(NAPI_STATE_SCHED, &n->state); } [37255.571996] Kernel panic - not syncing: BUG! [37255.595234] Call trace: [37255.597694] [<ffff80000008ab48>] dump_backtrace+0x0/0x1a0 [37255.603114] [<ffff80000008ad08>] show_stack+0x20/0x28 [37255.608187] [<ffff8000009c4944>] dump_stack+0x98/0xb8 [37255.613258] [<ffff8000009c149c>] panic+0x10c/0x26c [37255.618070] [<ffff80000070f134>] hns_nic_net_up+0x30c/0x4e0 [37255.623664] [<ffff80000070f39c>] hns_nic_net_open+0x94/0x12c [37255.629346] [<ffff80000084be78>] __dev_open+0xf4/0x168 [37255.634504] [<ffff80000084c1ac>] __dev_change_flags+0x98/0x15c [37255.640359] [<ffff80000084c29c>] dev_change_flags+0x2c/0x68 [37255.769580] [<ffff8000008dc400>] devinet_ioctl+0x650/0x704 [37255.775086] [<ffff8000008ddc38>] inet_ioctl+0x98/0xb4 [37255.780159] [<ffff800000827b7c>] sock_do_ioctl+0x44/0x84 [37255.785490] [<ffff800000828e04>] sock_ioctl+0x248/0x30c [37255.790737] [<ffff80000026dc6c>] do_vfs_ioctl+0x480/0x618 [37255.796156] [<ffff80000026de94>] SyS_ioctl+0x90/0xa4 [37255.801139] SMP: stopping secondary CPUs [37255.805079] kbox: catch panic event. [37255.809586] collected_len = 128928, LOG_BUF_LEN_LOCAL = 131072 [37255.816103] flush cache 0xffff80003f000000 size 0x800000 [37255.822192] flush cache 0xffff80003f000000 size 0x800000 [37255.828289] flush cache 0xffff80003f000000 size 0x800000 [37255.834378] kbox: no notify die func register. no need to notify [37255.840413] ---[ end Kernel panic - not syncing: BUG! This patchset fix this bug according to the flag NIC_STATE_DOWN. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: hns: Some registers use wrong address according to the datasheet.Yonglong Liu2019-01-132-127/+127
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 4ad26f117b6ea0f5d5f1592127bafb5ec65904d3 ] According to the hip06 datasheet: 1.Six registers use wrong address: RCB_COM_SF_CFG_INTMASK_RING RCB_COM_SF_CFG_RING_STS RCB_COM_SF_CFG_RING RCB_COM_SF_CFG_INTMASK_BD RCB_COM_SF_CFG_BD_RINT_STS DSAF_INODE_VC1_IN_PKT_NUM_0_REG 2.The offset of DSAF_INODE_VC1_IN_PKT_NUM_0_REG should be 0x103C + 0x80 * all_chn_num 3.The offset to show the value of DSAF_INODE_IN_DATA_STP_DISC_0_REG is wrong, so the value of DSAF_INODE_SW_VLAN_TAG_DISC_0_REG will be overwrite These registers are only used in "ethtool -d", so that did not cause ndev to misfunction. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: hns: All ports can not work when insmod hns ko after rmmod.Yonglong Liu2019-01-132-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 308c6cafde0147616da45e3a928adae55c428deb ] There are two test cases: 1. Remove the 4 modules:hns_enet_drv/hns_dsaf/hnae/hns_mdio, and install them again, must use "ifconfig down/ifconfig up" command pair to bring port to work. This patch calls phy_stop function when init phy to fix this bug. 2. Remove the 2 modules:hns_enet_drv/hns_dsaf, and install them again, all ports can not use anymore, because of the phy devices register failed(phy devices already exists). Phy devices are registered when hns_dsaf installed, this patch removes them when hns_dsaf removed. The two cases are sometimes related, fixing the second case also requires fixing the first case, so fix them together. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: hns: Incorrect offset address used for some registers.Yonglong Liu2019-01-131-2/+2
| | | | | | | | | | | | | [ Upstream commit 4e1d4be681b2c26fd874adbf584bf034573ac45d ] According to the hip06 Datasheet: 1. The offset of INGRESS_SW_VLAN_TAG_DISC should be 0x1A00+4*all_chn_num 2. The offset of INGRESS_IN_DATA_STP_DISC should be 0x1A50+4*all_chn_num Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* w90p910_ether: remove incorrect __init annotationArnd Bergmann2019-01-131-1/+1
| | | | | | | | | | | | | | | | | | [ Upstream commit 51367e423c6501a26e67d91a655d2bc892303462 ] The get_mac_address() function is normally inline, but when it is not, we get a warning that this configuration is broken: WARNING: vmlinux.o(.text+0x4aff00): Section mismatch in reference from the function w90p910_ether_setup() to the function .init.text:get_mac_address() The function w90p910_ether_setup() references the function __init get_mac_address(). This is often because w90p910_ether_setup lacks a __init Remove the __init to make it always do the right thing. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* drivers: net: xgene: Remove unnecessary forward declarationsNathan Chancellor2019-01-131-3/+0
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit 2ab4c3426c0cf711d7147e3f559638e4ab88960e ] Clang warns: drivers/net/ethernet/apm/xgene/xgene_enet_main.c:33:36: warning: tentative array definition assumed to have one element static const struct acpi_device_id xgene_enet_acpi_match[]; ^ 1 warning generated. Both xgene_enet_acpi_match and xgene_enet_of_match are defined before their uses at the bottom of the file so this is unnecessary. When CONFIG_ACPI is disabled, ACPI_PTR becomes NULL so xgene_enet_acpi_match doesn't need to be defined. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* bnx2x: Send update-svid ramrod with retry/poll flags enabledSudarsana Reddy Kalluru2019-01-132-1/+10
| | | | | | | | | | | | | | | [ Upstream commit 9061193c4ee065d3240fde06767c2e06ec61decc ] Driver sends update-SVID ramrod in the MFW notification path. If there is a pending ramrod, driver doesn't retry the command and storm firmware will never be updated with the SVID value. The patch adds changes to send update-svid ramrod in process context with retry/poll flags set. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* bnx2x: Remove configured vlans as part of unload sequence.Sudarsana Reddy Kalluru2019-01-132-8/+30
| | | | | | | | | | | | | | | | [ Upstream commit 04f05230c5c13b1384f66f5186a68d7499e34622 ] Vlans are not getting removed when drivers are unloaded. The recent storm firmware versions had added safeguards against re-configuring an already configured vlan. As a result, PF inner reload flows (e.g., mtu change) might trigger an assertion. This change is going to remove vlans (same as we do for MACs) when doing a chip cleanup during unload. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* bnx2x: Clear fip MAC when fcoe offload support is disabledSudarsana Reddy Kalluru2019-01-131-1/+3
| | | | | | | | | | | | | | [ Upstream commit bbf666c1af916ed74795493c564df6fad462cc80 ] On some customer setups it was observed that shmem contains a non-zero fip MAC for 57711 which would lead to enabling of SW FCoE. Add a software workaround to clear the bad fip mac address if no FCoE connections are supported. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ixgbe: Fix race when the VF driver does a resetRoss Lagerwall2019-01-131-1/+10
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 96d1a731611f711f0cb82cea93363ae2ea8cb028 ] When the VF driver does a reset, it (at least the Linux one) writes to the VFCTRL register to issue a reset and then immediately sends a reset message using the mailbox API. This is racy because when the PF driver detects that the VFCTRL register reset pin has been asserted, it clears the mailbox memory. Depending on ordering, the reset message sent by the VF could be cleared by the PF driver. It then responds to the cleared message with a NACK which causes the VF driver to malfunction. Fix this by deferring clearing the mailbox memory until the reset message is received. Fixes: 939b701ad633 ("ixgbe: fix driver behaviour after issuing VFLR") Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* i40e: fix mac filter delete when setting mac addressStefan Assmann2019-01-131-7/+7
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 158daed16efb1170694e420ae06ba8ba954d82e5 ] A previous commit moved the ether_addr_copy() in i40e_set_mac() before the mac filter del/add to avoid a race. However it wasn't taken into account that this alters the mac address being handed to i40e_del_mac_filter(). Also changed i40e_add_mac_filter() to operate on netdev->dev_addr, hopefully that makes the code easier to read. Fixes: 458867b2ca0c ("i40e: don't remove netdev->dev_addr when syncing uc list") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ibmvnic: Fix non-atomic memory allocation in IRQ contextThomas Falcon2019-01-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 1d1bbc37f89b0559c9e913682f2489d89cfde6b8 ] ibmvnic_reset allocated new reset work item objects in a non-atomic context. This can be called from a tasklet, generating the output below. Allocate work items with the GFP_ATOMIC flag instead. BUG: sleeping function called from invalid context at mm/slab.h:421 in_atomic(): 1, irqs_disabled(): 1, pid: 93, name: kworker/0:2 INFO: lockdep is turned off. irq event stamp: 66049 hardirqs last enabled at (66048): [<c000000000122468>] tasklet_action_common.isra.12+0x78/0x1c0 hardirqs last disabled at (66049): [<c000000000befce8>] _raw_spin_lock_irqsave+0x48/0xf0 softirqs last enabled at (66044): [<c000000000a8ac78>] dev_deactivate_queue.constprop.28+0xc8/0x160 softirqs last disabled at (66045): [<c0000000000306e0>] call_do_softirq+0x14/0x24 CPU: 0 PID: 93 Comm: kworker/0:2 Kdump: loaded Not tainted 4.20.0-rc6-00001-g1b50a8f03706 #7 Workqueue: events linkwatch_event Call Trace: [c0000003fffe7ae0] [c000000000bc83e4] dump_stack+0xe8/0x164 (unreliable) [c0000003fffe7b30] [c00000000015ba0c] ___might_sleep+0x2dc/0x320 [c0000003fffe7bb0] [c000000000391514] kmem_cache_alloc_trace+0x3e4/0x440 [c0000003fffe7c30] [d000000005b2309c] ibmvnic_reset+0x16c/0x360 [ibmvnic] [c0000003fffe7cc0] [d000000005b29834] ibmvnic_tasklet+0x1054/0x2010 [ibmvnic] [c0000003fffe7e00] [c0000000001224c8] tasklet_action_common.isra.12+0xd8/0x1c0 [c0000003fffe7e60] [c000000000bf1238] __do_softirq+0x1a8/0x64c [c0000003fffe7f90] [c0000000000306e0] call_do_softirq+0x14/0x24 [c0000003f3967980] [c00000000001ba50] do_softirq_own_stack+0x60/0xb0 [c0000003f39679c0] [c0000000001218a8] do_softirq+0xa8/0x100 [c0000003f39679f0] [c000000000121a74] __local_bh_enable_ip+0x174/0x180 [c0000003f3967a60] [c000000000bf003c] _raw_spin_unlock_bh+0x5c/0x80 [c0000003f3967a90] [c000000000a8ac78] dev_deactivate_queue.constprop.28+0xc8/0x160 [c0000003f3967ad0] [c000000000a8c8b0] dev_deactivate_many+0xd0/0x520 [c0000003f3967b70] [c000000000a8cd40] dev_deactivate+0x40/0x60 [c0000003f3967ba0] [c000000000a5e0c4] linkwatch_do_dev+0x74/0xd0 [c0000003f3967bd0] [c000000000a5e694] __linkwatch_run_queue+0x1a4/0x1f0 [c0000003f3967c30] [c000000000a5e728] linkwatch_event+0x48/0x60 [c0000003f3967c50] [c0000000001444e8] process_one_work+0x238/0x710 [c0000003f3967d20] [c000000000144a48] worker_thread+0x88/0x4e0 [c0000003f3967db0] [c00000000014e3a8] kthread+0x178/0x1c0 [c0000003f3967e20] [c00000000000bfd0] ret_from_kernel_thread+0x5c/0x6c Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ibmvnic: Convert reset work item mutex to spin lockThomas Falcon2019-01-132-8/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 6c5c7489089608d89b7ce310bca44812e2b0a4a5 ] ibmvnic_reset can create and schedule a reset work item from an IRQ context, so do not use a mutex, which can sleep. Convert the reset work item mutex to a spin lock. Locking debugger generated the trace output below. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 in_atomic(): 1, irqs_disabled(): 1, pid: 120, name: kworker/8:1 4 locks held by kworker/8:1/120: #0: 0000000017c05720 ((wq_completion)"events"){+.+.}, at: process_one_work+0x188/0x710 #1: 00000000ace90706 ((linkwatch_work).work){+.+.}, at: process_one_work+0x188/0x710 #2: 000000007632871f (rtnl_mutex){+.+.}, at: rtnl_lock+0x30/0x50 #3: 00000000fc36813a (&(&crq->lock)->rlock){..-.}, at: ibmvnic_tasklet+0x88/0x2010 [ibmvnic] irq event stamp: 26293 hardirqs last enabled at (26292): [<c000000000122468>] tasklet_action_common.isra.12+0x78/0x1c0 hardirqs last disabled at (26293): [<c000000000befce8>] _raw_spin_lock_irqsave+0x48/0xf0 softirqs last enabled at (26288): [<c000000000a8ac78>] dev_deactivate_queue.constprop.28+0xc8/0x160 softirqs last disabled at (26289): [<c0000000000306e0>] call_do_softirq+0x14/0x24 CPU: 8 PID: 120 Comm: kworker/8:1 Kdump: loaded Not tainted 4.20.0-rc6 #6 Workqueue: events linkwatch_event Call Trace: [c0000003fffa7a50] [c000000000bc83e4] dump_stack+0xe8/0x164 (unreliable) [c0000003fffa7aa0] [c00000000015ba0c] ___might_sleep+0x2dc/0x320 [c0000003fffa7b20] [c000000000be960c] __mutex_lock+0x8c/0xb40 [c0000003fffa7c30] [d000000006202ac8] ibmvnic_reset+0x78/0x330 [ibmvnic] [c0000003fffa7cc0] [d0000000062097f4] ibmvnic_tasklet+0x1054/0x2010 [ibmvnic] [c0000003fffa7e00] [c0000000001224c8] tasklet_action_common.isra.12+0xd8/0x1c0 [c0000003fffa7e60] [c000000000bf1238] __do_softirq+0x1a8/0x64c [c0000003fffa7f90] [c0000000000306e0] call_do_softirq+0x14/0x24 [c0000003f3f87980] [c00000000001ba50] do_softirq_own_stack+0x60/0xb0 [c0000003f3f879c0] [c0000000001218a8] do_softirq+0xa8/0x100 [c0000003f3f879f0] [c000000000121a74] __local_bh_enable_ip+0x174/0x180 [c0000003f3f87a60] [c000000000bf003c] _raw_spin_unlock_bh+0x5c/0x80 [c0000003f3f87a90] [c000000000a8ac78] dev_deactivate_queue.constprop.28+0xc8/0x160 [c0000003f3f87ad0] [c000000000a8c8b0] dev_deactivate_many+0xd0/0x520 [c0000003f3f87b70] [c000000000a8cd40] dev_deactivate+0x40/0x60 [c0000003f3f87ba0] [c000000000a5e0c4] linkwatch_do_dev+0x74/0xd0 [c0000003f3f87bd0] [c000000000a5e694] __linkwatch_run_queue+0x1a4/0x1f0 [c0000003f3f87c30] [c000000000a5e728] linkwatch_event+0x48/0x60 [c0000003f3f87c50] [c0000000001444e8] process_one_work+0x238/0x710 [c0000003f3f87d20] [c000000000144a48] worker_thread+0x88/0x4e0 [c0000003f3f87db0] [c00000000014e3a8] kthread+0x178/0x1c0 [c0000003f3f87e20] [c00000000000bfd0] ret_from_kernel_thread+0x5c/0x6c Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* r8169: fix WoL device wakeup enableHeiner Kallweit2019-01-091-2/+2
| | | | | | | | | | | | | | [ Upstream commit 3bd8264511035dc97c902f03fa9f1d07f95f8f62 ] In rtl8169_runtime_resume() we configure WoL but don't set the device to wakeup-enabled. This prevents PME generation once the cable is re-plugged. Fix this by moving the call to device_set_wakeup_enable() to __rtl8169_set_wol(). Fixes: 433f9d0ddcc6 ("r8169: improve saved_wolopts handling") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: mvneta: fix operation for 64K PAGE_SIZEMarcin Wojtas2019-01-091-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit e735fd55b94bb48363737db3b1d57627c1a16b47 ] Recent changes in the mvneta driver reworked allocation and handling of the ingress buffers to use entire pages. Apart from that in SW BM scenario the HW must be informed via PRXDQS about the biggest possible incoming buffer that can be propagated by RX descriptors. The BufferSize field was filled according to the MTU-dependent pkt_size value. Later change to PAGE_SIZE broke RX operation when usin 64K pages, as the field is simply too small. This patch conditionally limits the value passed to the BufferSize of the PRXDQS register, depending on the PAGE_SIZE used. On the occasion remove now unused frag_size field of the mvneta_port structure. Fixes: 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM") Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx5e: RX, Fix wrong early return in receive queue pollTariq Toukan2019-01-091-4/+6
| | | | | | | | | | | | | | | | | | | | [ Upstream commit bfc698254ba97b3e3e4ebbfae0ffa1f7e2fa0717 ] When the completion queue of the RQ is empty, do not immediately return. If left-over decompressed CQEs (from the previous cycle) were processed, need to go to the finalization part of the poll function. Bug exists only when CQE compression is turned ON. This solves the following issue: mlx5_core 0000:82:00.1: mlx5_eq_int:544:(pid 0): CQ error on CQN 0xc08, syndrome 0x1 mlx5_core 0000:82:00.1 p4p2: mlx5e_cq_error_event: cqn=0x000c08 event=0x04 Fixes: 4b7dfc992514 ("net/mlx5e: Early-return on empty completion queues") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx5e: Remove unused UDP GSO remaining counterMikhael Goikhman2019-01-092-4/+0
| | | | | | | | | | | | | [ Upstream commit d13b224f431579fe2d712871d4265d7a22ca6c9c ] Remove tx_udp_seg_rem counter from ethtool output, as it is no longer being updated in the driver's data flow. Fixes: 3f44899ef2ce ("net/mlx5e: Use PARTIAL_GSO for UDP segmentation") Signed-off-by: Mikhael Goikhman <migo@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OpenPOWER on IntegriCloud