summaryrefslogtreecommitdiffstats
path: root/drivers/net/can/sja1000/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* can: sja1000: plx_pci: add support for ASEM CAN raw deviceFlavio Suligoi2018-11-281-0/+1
| | | | | | | | This patch adds support for ASEM opto-isolated dual channels CAN raw device (http://www.asem.it) Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* Kconfig: rename HAS_IOPORT to HAS_IOPORT_MAPUwe Kleine-König2014-04-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | If the renamed symbol is defined lib/iomap.c implements ioport_map and ioport_unmap and currently (nearly) all platforms define the port accessor functions outb/inb and friend unconditionally. So HAS_IOPORT_MAP is the better name for this. Consequently NO_IOPORT is renamed to NO_IOPORT_MAP. The motivation for this change is to reintroduce a symbol HAS_IOPORT that signals if outb/int et al are available. I will address that at least one merge window later though to keep surprises to a minimum and catch new introductions of (HAS|NO)_IOPORT. The changes in this commit were done using: $ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/' Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* can: sja1000: fuse of_platform into platformFlorian Vaussard2014-02-041-10/+3
| | | | | | | | | The OpenFirmware probe can be merged into the standard platform probe to leverage common code. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* can: sja1000: limit PEAK PCAN-PC Card to HAS_IOPORTMarc Kleine-Budde2013-03-271-0/+1
| | | | | | | | | | | | This patch limits the PEAK PCAN-PC Card driver to systems with ioports. Fixes a compile time breakage on SH: drivers/net/can/sja1000/peak_pcmcia.c:626:2: error: implicit declaration of function 'ioport_unmap' Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* can: sja1000: correct indention of Kconfig help textMarc Kleine-Budde2013-01-261-6/+6
| | | | | | | This patch changes the indention of the Kconfig help text to the default <tab> + 2 <space>. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* can: Kconfig: convert 'depends on CAN_DEV' into 'if CAN_DEV...endif' blockMarc Kleine-Budde2013-01-261-1/+1
| | | | | | | | This patch adds an 'if CAN_DEV...endif' Block around the CAN driver symbols in drivers/net/can/Kconfig. So the 'depends on CAN' dependencies can be removed. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* can: sja1000: Make sja1000_of_platform selectable and compilable on SPARCAndreas Larsson2012-11-271-1/+1
| | | | | Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* can: sja1000: plx_pci: add support for Connect Tech Inc's Canpro/104-Plus ↵Muhammad Ghias2012-11-151-0/+1
| | | | | | | | | | | | | Opto CAN board Patch adds support for CANpro/104-Plus Opto CAN board. Board uses PLX9030 bridge and two NXP SJA1000 CAN controllers. Patch is generated and tested with kernel 3.6.1. Signed-off-by: Muhammad Ghias <mghias@connecttech.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> [mkl: minor adjustments to commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* Fix "the the" in various KconfigMasanari Iida2012-04-181-1/+1
| | | | | | | Fix typo "the the" in various Kconfig. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* can: sja1000: add support for PEAK-System PCMCIA cardStephane Grosjean2012-03-031-0/+9
| | | | | | | | | | | This patch adds support to the PCAN-PC Card PCMCIA card from PEAK-System Technik (www.peak-system.com). This card is a CAN interface for the PC Card slot. It is available as a single or dual-channel version. Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* can: peak_pci: add support of some new PEAK-System PCI cardsStephane Grosjean2012-03-031-3/+15
| | | | | | | | | | | | | | | | This patch adds the support of some new PEAK-System PCI cards in the CAN network sub-system. These are: PCAN-PCIeC (PCI-ExpressCard) PCAN-mminiPCI (mini-PCI) PCAN-PCI (PCI next-gen) This patch also adds the control of the blinking leds of the PCAN-PCIeC. Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* can: plx_pci: add support for IXXAT PCI cardsJames Kime2012-02-031-0/+1
| | | | | | | | This patch adds support for IXXAT passive CAN controllers Signed-off-by: James Kime <kime@ixxat.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* can: sja1000_isa: convert to platform driver to support x86_64 systemsWolfgang Grandegger2011-11-291-1/+0
| | | | | | | | | | This driver is currently not supported on x86_64 systems because the "isa_driver" interface is used (CONFIG_ISA=y). To overcome this limitation, the driver is converted to a platform driver, similar to the serial 8250 driver. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* can/sja1000: add driver for EMS PCMCIA cardOliver Hartkopp2011-09-281-0/+7
| | | | | | | | | This patch adds the driver for the SJA1000 based PCMCIA card 'CPC-Card' from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Markus Plessing <plessing@ems-wuensche.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* can/sja1000: driver for PEAK PCAN PCI/PCIe cardsWolfgang Grandegger2011-09-211-0/+7
| | | | | | | | | | This patch add the peak_pci driver for the PCAN PCI/PCIe cards (1, 2, 3 or 4 channels) from PEAK Systems (http://www.peak-system.com). Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* can: tscan1: add driver for TS-CAN1 boardsAndre B. Oliveira2010-10-241-0/+12
| | | | | | | | | Add driver for Technologic Systems TS-CAN1 PC104 peripheral boards. Signed-off-by: Andre B. Oliveira <anbadeol@gmail.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* can: Add esd board support to plx_pci CAN driverMatthias Fuchs2010-04-131-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for SJA1000 based PCI CAN interface cards from electronic system design gmbh. Some changes have been done on the common code: - esd boards must not have the 2nd local interupt enabled (PLX9030/9050) - a new path for PLX9056/PEX8311 chips has been added - new plx9056 reset function has been implemented - struct plx_card_info got a reset function entry In detail the following additional boards are now supported: CAN-PCI/200 (PCI) CAN-PCI/266 (PCI) CAN-PMC266 (PMC module) CAN-PCIe/2000 (PCI Express) CAN-CPCI/200 (Compact PCI, 3U) CAN-PCI104 (PCI104) Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* can: add support for CAN interface cards based on the PLX90xx PCI bridgePavel Cheblakov2010-02-031-0/+12
| | | | | | | | | | | | | | | | | | | This driver is for CAN interface cards based on the PLX90xx PCI bridge. Driver supports now: - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/) - Adlink PCI-7841/cPCI-7841 SE card - Marathon CAN-bus-PCI card (http://www.marathon.ru/) - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/) Changes since v1: - Added some defines for static inline int plx_pci_check_sja1000(...) - static struct pci_device_id plx_pci_tbl[] replaced by static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl) - Typo fixed Signed-off-by: Pavel Cheblakov <P.B.Cheblakov@inp.nsk.su> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* can: Fix driver Kconfig structureOliver Hartkopp2009-11-131-0/+47
In 2.6.32-rc the new EMS USB CAN driver was contributed and added the Kconfig entry right behind an entry of the same *vendor*. This teared the SJA1000 based driver selection into pieces. This fix cleans up the 2.6.32-rc Kconfig files for the CAN drivers and moves the SJA1000 and USB Kconfig portions into the belonging directories. As there are many new CAN drivers in the queue getting this cleanup into 2.6.32-rc would massively reduce the problems for the upcoming drivers. Thanks, Oliver Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud