summaryrefslogtreecommitdiffstats
path: root/drivers/misc/mei/hw-me.c
Commit message (Collapse)AuthorAgeFilesLines
* mei: trace pci configuration space ioTomas Winkler2016-02-071-2/+8
| | | | | | | | Use tracing events also for reading and writing pci configuration space <debugfs>/tracing/events/mei/mei_pci_reg_{read,write} Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: fix d0i3 register offset in tracingAlexander Usyskin2015-09-201-2/+2
| | | | | | | | | Fix copy-paste error in D0i3 register access tracing Fixes: 13b14c3f ("mei: me: d0i3: add d0i3 enter/exit state machine") Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: d0i3: exit d0i3 on driver start and enter it on stopAlexander Usyskin2015-08-031-9/+29
| | | | | | | | | | | A BIOS may put the device in d0i3 on platform initialization so it won’t consume power even if the driver is not present, in turn the driver has to wake up the devices on load in order to perform the initialization sequence and move it back to low power state on driver remove. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: d0i3: move mei_me_hw_reset down in the fileAlexander Usyskin2015-08-031-51/+52
| | | | | | | | | Move mei_me_hw_reset down in the source file to avoid forward declarations when introducing d0i3 flow in the next patch. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: d0i3: add d0i3 enter/exit state machineAlexander Usyskin2015-08-031-7/+330
| | | | | | | | | | | | | | | Rework mei power gating state machine to support entry and exit to and from D0i3 power state. The choice between legacy and D0i3 routines is conditioned on d0i3_supported flag. The patch introduces warning: drivers/misc/mei/hw-me.c:901:12: warning: ‘mei_me_d0i3_enter’ defined but not used [-Wunused-function] it will go away in consequent patch Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: d0i3: enable d0i3 interruptsAlexander Usyskin2015-08-031-18/+17
| | | | | | | | | | | D0i3 adds additional interrupt reason bit, therefore we add a variable intr_source to save the interrupt causes for further dispatching. The interrupt cause is saved in the irq quick handler to achieve unified behavior for both MSI enabled and shared interrupt platforms. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: d0i3: add flag to indicate D0i3 supportAlexander Usyskin2015-08-031-1/+9
| | | | | | | | | Detect d0i3 low power state during hw configuration, the value is set in HFS_1 pci config reigister. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: wait for power gating exit confirmationAlexander Usyskin2015-06-131-4/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | Fix the hbm power gating state machine so it will wait till it receives confirmation interrupt for the PG_ISOLATION_EXIT message. In process of the suspend flow the devices first have to exit from the power gating state (runtime pm resume). If we do not handle the confirmation interrupt after sending PG_ISOLATION_EXIT message, we may receive it already after the suspend flow has changed the device state and interrupt will be interpreted as a spurious event, consequently link reset will be invoked which will prevent the device from completing the suspend flow kernel: [6603] mei_reset:136: mei_me 0000:00:16.0: powering down: end of reset kernel: [476] mei_me_irq_thread_handler:643: mei_me 0000:00:16.0: function called after ISR to handle the interrupt processing. kernel: mei_me 0000:00:16.0: FW not ready: resetting Cc: <stable@vger.kernel.org> #3.18+ Cc: Gabriele Mazzotta <gabriele.mzt@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=86241 Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=770397 Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: change power gating function name conventionsAlexander Usyskin2015-03-011-10/+10
| | | | | | | | | | | | | | | The current power gating naming was confusing, we wish to swap meanings of register and flow level power gating terms, For registers writing level use terms set and unset: mei_me_pg_set, mei_me_pg_unset For flow/high level use power gating enter and power gating exit terms mei_me_pg_enter_sync, mei_me_pg_exit_sync Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: add io register tracingTomas Winkler2015-03-011-4/+27
| | | | | | | | | To make debugging a bit easier we add me register access tracing <debugfs>/tracing/events/mei/mei_reg_{read,write} Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: use io register wrappers consistentlyTomas Winkler2015-03-011-57/+66
| | | | | | | | | | | 1. Use mei_device structure as the first argument to the io register access wrappers so we'll have access to the device structure needed for tracing. 2. Use wrapper consistently Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: release hw from reset only during the reset flowAlexander Usyskin2015-02-031-2/+1
| | | | | | | | | | | | We might enter the interrupt handler with hw_ready already set, but prior we actually started the reset flow. To soleve this we move the reset release from the interrupt handler to the HW start wait function which is part of the reset sequence. Cc: <stable@vger.kernel.org> #3.10+ Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: mask interrupt set bit on clean reset bitAlexander Usyskin2015-02-031-1/+1
| | | | | | | | | | | | | | We should mask interrupt set bit when writing back hcsr value in reset bit clean-up. This is refinement for mei: clean reset bit before reset commit b13a65ef190e488e2761d65bdd2e1fe8a3a125f5 Cc: <stable@vger.kernel.org> #3.10+ Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: clean reset bit before resetAlexander Usyskin2015-01-091-0/+12
| | | | | | | | | | | | H_RST bit in H_CSR register may be found lit before reset is started, for example if preceding reset flow hasn't completed. In that case asserting H_RST will be ignored, therefore we need to clean H_RST bit to start a successful reset sequence. Cc: <stable@vger.kernel.org> #3.10+ Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: read and print all six FW status registersAlexander Usyskin2014-11-261-3/+16
| | | | | | | | | ME devices prior to PCH8 (Lynx Point) have two FW status registers, on PCH8 and newer excluding txe there are six FW status registers. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: kill cached host and me csr valuesTomas Winkler2014-11-261-14/+16
| | | | | | | | | | Kill host_hw_status and me_hw_state from me hw structure that used to cache host and me csr values. We do not use the cached values across the function calls anymore Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: fix kernel-doc warningsAlexander Usyskin2014-09-291-7/+34
| | | | | | | | Add missed parameters descriptions and return values descriptions Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: fix KDoc documentation formattingAlexander Usyskin2014-09-291-24/+24
| | | | | | | | | Fix Kdoc documentation formatting warnings genertaed by ./scripts/kernel-doc Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: push pci cfg structure me hwTomas Winkler2014-09-291-2/+5
| | | | | | | | Device specific configurations are currently only needed by me hw so we can remove it from txe Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: remove the reference to pdev from mei_deviceTomas Winkler2014-09-291-2/+1
| | | | | | | | For purpose of adding testing HW we would like to get rid of pci dependency in generic mei code. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: move fw_status back to hw ops handlersTomas Winkler2014-09-291-0/+28
| | | | | | | | fw status retrieval has pci specific implementation so we push it back to the hw layer Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: get rid of most of the pci dependencies in meiTomas Winkler2014-09-291-15/+15
| | | | | | | | | | For purpose of adding testing HW we would like to get rid of pci dependency in generic mei code This patch provides only straight forward changes FW status and prob quirks need to be handled separately Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: push all standard settings into mei_device_initTomas Winkler2014-09-291-4/+2
| | | | | | | | | | | Setting of hw_ops and device has should be in mei_device_init. We add reference to the parent device and remove pci dependent cfg Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: fix style warning: Missing a blank line after declarationsTomas Winkler2014-09-291-0/+12
| | | | | | | fix new style warning: Missing a blank line after declarations Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: pg: fix cat and paste error in commentsTomas Winkler2014-09-291-2/+2
| | | | | | Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: extract supported features from the hbm versionTomas Winkler2014-09-231-5/+1
| | | | | | | extract supported hbm features and commands from the hbm version Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: wait for hw ready non-interruptibleAlexander Usyskin2014-09-231-10/+5
| | | | | | | | | | We cannot handle user interrupt in context of hw initialization so we only wait for time out which is reasonably short Also we don't need to check error from wait, only flag value. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: drop unused hw dependent fw status functionsAlexander Usyskin2014-07-221-54/+0
| | | | | | | | | | | | We introduced unified FW status function in patch mei: add per device configuration (lkml.org/lkml/2014/5/12/607) This change made hw_ops functions unused and obsolete therefore we remove these functions from source code. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: move probe quirk to cfg structureTomas Winkler2014-05-271-0/+37
| | | | | | | | Move quirk FW type detector to cfg structure Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: add per device configurationAlexander Usyskin2014-05-271-2/+32
| | | | | | | | | | Add mei_cfg structure that holds per device configuration data and hooks, as the first step we add firmware status register offsets Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: read H_CSR after asserting resetTomas Winkler2014-05-271-0/+12
| | | | | | | | | | | According the spec the host should read H_CSR again after asserting reset H_RST to ensure that reset was read by the firmware Cc: stable@vger.kernel.org Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: drop harmful wait optimizationTomas Winkler2014-05-271-3/+1
| | | | | | | | | | It my take time till ME_RDY will be cleared after the reset, so we cannot check the bit before we got the interrupt Cc: stable@vger.kernel.org Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: fix hw ready reset flowTomas Winkler2014-05-271-3/+6
| | | | | | | | | | | | We cleared H_RST for H_CSR on spurious interrupt generated when ME_RDY while cleared and not while ME_RDY is set. The spurious interrupt is not delivered on all platforms in this case the driver may fail to initialize. Cc: stable@vger.kernel.org Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: extract fw status registersAlexander Usyskin2014-05-031-0/+55
| | | | | | | | | Fetch FW status registers, as they are important in in understanding of FW reset reasons Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: add pg exit and entry flow commandsTomas Winkler2014-05-031-4/+88
| | | | | | | | | | | | | | | | For power gating entry we write hbm pg entry request command and then we set pg register For power gating exit we clear pg register and wait for exit request hbm command. Exit power gating request might also be initiated by the firmware w/o explicit driver request The power gating state is tracked by pg_state member of me_hw Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: expose hardware power gating state to mei layerTomas Winkler2014-05-031-0/+15
| | | | | | | | | | | | | | | | | | Since the runtime pm and the internal power gating cannot be in complete sync in regards to I/O operations, we need to expose the device hardware internal power gating state to mei layer 2. We add pg_state handler that translate the hw internal pg state to mei layer 2. We add power gating event variable to keep power track of power gating transitions Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: condition PGI support on HW and HBM versionTomas Winkler2014-05-031-0/+37
| | | | | | | | | | | | | Enable power gating isolation only if hw and fw support it. This is indicated by ME_PGIC_HRA bit in ME_CSR_HA register and on HBM protocol version. The information is exported to MEI layer through new pg_is_enabled hw op. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: add power gating isolation register write wrappersTomas Winkler2014-05-031-0/+29
| | | | | | | | | Add entry and exit power gating isolation register write handler. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: make me hw headers private to me hw.Tomas Winkler2014-03-171-2/+2
| | | | | | | | | Remove includes of me-hw.h and me-hw-regs.h headers from the mei generic code. The mei layer should not depend on hw specific headers Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: do not reset when less than expected data is receivedTomas Winkler2014-03-171-0/+9
| | | | | | | | | | | | | | | | | There is a race in ME hardware between data copy for host and interrupt delivery. An interrupt can be delivered prior to whole data copied for the host to read but rather then going trough the reset we just merely need to wait for the next interrupt. The bug is visible in read/write stress with multiple connections per client This is a regression caused as a side effect of the commit: commit 544f94601409653f07ae6e22d4a39e3a90dceead mei: do not run reset flow from the interrupt thread Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Cc: stable <stable@vger.kernel.org> # 3.14 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: make return values consistent across the driverAlexander Usyskin2014-02-281-4/+4
| | | | | | | | | | | | 1. Propagate ENOTTY to user space if the client is not present in the system 2. Use ETIME consistently on timeouts 3. Return EIO on write failures 4. Return ENODEV on recoverable device failures such as resets Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: revamp writing slot countingTomas Winkler2014-02-281-1/+1
| | | | | | | | | | Since txe use doorbell and not circular buffer we have to cheat in write slot counting, txe always consume all the slots upon write. In order for it to work we need to track slots using mei_hbuf_empty_slots() instead of tracking it in mei layer Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: add mei_hbuf_acquire wrapperTomas Winkler2014-02-281-0/+2
| | | | | | | | | | | | A client has to acquire host buffer before writing, we add lock like wrapper to replace the code snippet if (dev->hbuf_is_ready) dev->hbuf_is_ready = false; Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: get rid of ext_msgTomas Winkler2014-02-141-3/+0
| | | | | | | | Use more standard message writing for oob data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: allow multiple retries if the hw reset has failedTomas Winkler2014-02-071-1/+1
| | | | | | | | | | | | | In some rare case mei hw reset may take long time to settle. Instead of blocking resume flow we span another driver reset flow in separate work context This allows as to shorten hw reset timeout to something more acceptable by DPM_WATCHDOG_TIMEOUT Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: revamp mei reset state machineTomas Winkler2014-01-131-7/+3
| | | | | | | | | | | | | | | | | | | | | 1. MEI_DEV_RESETTING device state spans only hardware reset flow while starting dev state is saved into a local variable for further reference, this let us to reduce big if statements in case we are trying to avoid nested resets 2. During initializations if the reset ended in MEI_DEV_DISABLED device state we bail out with -ENODEV 3. Remove redundant interrupts_enabled parameter as this can be deduced from the starting dev_state 4. mei_reset propagates error code to the caller 5. Add mei_restart function to wrap the pci resume Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: do not run reset flow from the interrupt threadTomas Winkler2014-01-081-17/+15
| | | | | | | | | | | | | | | | | | This fixes a potential deadlock in case of a firmware initiated reset mei_reset has a dialog with the interrupt thread hence it has to be run from an another work item Most of the mei_resets were called from mei_hbm_dispatch which is called in interrupt thread context so this function underwent major revamp. The error code is propagated to the interrupt thread and if needed the reset is scheduled from there. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: fix hardware reset flowTomas Winkler2013-08-121-6/+3
| | | | | | | | | | | | | | | | | | | | Both H_IS and H_IE needs to be set to receive H_RDY interrupt 1. Assert H_IS to clear the interrupts during hw reset and use mei_me_reg_write instead of mei_hcsr_set as the later strips down the H_IS 2. fix interrupt disablement embarrassing typo hcsr |= ~H_IE -> hcsr &= ~H_IE; this will remove the unwanted interrupt on power down 3. remove useless debug print outs Cc: Shuah Khan <shuah.kh@samsung.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: fix waiting for hw readyTomas Winkler2013-07-231-3/+7
| | | | | | | | | | | | | 1. MEI_INTEROP_TIMEOUT is in seconds not in jiffies so we use mei_secs_to_jiffies macro While cold boot is fast this is relevant in resume 2. wait_event_interruptible_timeout can return with -ERESTARTSYS so do not override it with -ETIMEDOUT 3.Adjust error message Tested-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: fix reset state machineTomas Winkler2013-07-231-1/+3
| | | | | | | | | | | ME HW ready bit is down after hw reset was asserted or on error. Only on error we need to enter the reset flow, additional reset need to be prevented when reset was triggered during initialization , power up/down or a reset is already in progress Tested-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OpenPOWER on IntegriCloud