summaryrefslogtreecommitdiffstats
path: root/drivers/mfd/wm831x-core.c
Commit message (Collapse)AuthorAgeFilesLines
* mfd: core: Push irqdomain mapping out into devicesMark Brown2012-09-141-8/+8
| | | | | | | | | | | | | | | | | | | | | Currently the MFD core supports remapping MFD cell interrupts using an irqdomain but only if the MFD is being instantiated using device tree and only if the device tree bindings use the pattern of registering IPs in the device tree with compatible properties. This will be actively harmful for drivers which support non-DT platforms and use this pattern for their DT bindings as it will mean that the core will silently change remapping behaviour and it is also limiting for drivers which don't do DT with this particular pattern. There is also a potential fragility if there are interrupts not associated with MFD cells and all the cells are omitted from the device tree for some reason. Instead change the code to take an IRQ domain as an optional argument, allowing drivers to take the decision about the parent domain for their interrupts. The one current user of this feature is ab8500-core, it has the domain lookup pushed out into the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: wm831x: Convert to IORESOURCE_REGMark Brown2012-09-111-46/+20
| | | | | | | | | | | This was originally written by Russell King who unfortunately found himself unable to take the patch futher. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Tested-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Convert wm831x to irq_domainMark Brown2012-05-201-10/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The modern idiom is to use irq_domain to allocate interrupts. This is useful partly to allow further infrastructure to be based on the domains and partly because it makes it much easier to allocate virtual interrupts to devices as we don't need to allocate a contiguous range of interrupt numbers. Convert the wm831x driver over to this infrastructure, using a legacy IRQ mapping if an irq_base is specified in platform data and otherwise using a linear mapping, always registering the interrupts even if they won't ever be used. Only boards which need to use the GPIOs as interrupts should need to use an irq_base. This means that we can't use the MFD irq_base management since the unless we're using an explicit irq_base from platform data we can't rely on a linear mapping of interrupts. Instead we need to map things via the irq_domain - provide a conveniencem function wm831x_irq() to save a small amount of typing when doing so. Looking at this I couldn't clearly see anything the MFD core could do to make this nicer. Since we're not supporting device tree yet there's no meaningful advantage if we don't do this conversion in one, the fact that the interrupt resources are used for repeated IP blocks makes accessor functions for the irq_domain more trouble to do than they're worth. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Fix wm831x register range passing for recent ARM updatesMark Brown2012-05-071-0/+26
| | | | | | | | | | | | | | | The removal of mach/io.h from most ARM platforms also set the range of valid IO ports to be empty for most platforms when previously any 32 bit integer had been valid. This makes it impossible to add IO resources as the added range is smaller than that of the root resource for IO ports. Since we're not really using IO memory at all fix this by defining our own root resource outside the normal tree and make that the parent of all IO resources. This also ensures we won't conflict with read IO ports if we ever run on a platform which happens to use them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: wm831x: Convert to devm_regmap_init()Mark Brown2012-02-221-11/+9
| | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Return an error on failed wm831x register writesMark Brown2012-01-091-0/+2
| | | | | | | Got dropped in the regmap conversion. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Convert wm831x core driver to devm_kzalloc()Mark Brown2012-01-091-2/+0
| | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Enable rbtree cache for wm831x devicesMark Brown2011-10-171-0/+2
| | | | | | | | | Most useful with the regulators where we're doing a lot of read/modify/write updates in potentially performance critical paths. Providing some defaults would make this slightly better but this is a win right now. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Support software initiated shutdown of WM831x PMICsMark Brown2011-09-201-0/+11
| | | | | | | | | | | In systems where there is no hardware signal from the processor to the PMIC to initiate the final power off sequence we must initiate the shutdown with a register write to the PMIC. Support such systems in the driver. Since this may prevent a full shutdown of the system platform data is used to enable the feature. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Provide regmap register access info from wm831x driverMark Brown2011-08-221-0/+351
| | | | | | | | Lets us see the register map in debugfs and will enable us to push access checking down into the regmap API. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Convert WM831x to use regmap APIMark Brown2011-08-221-61/+28
| | | | | | | | | | Factor out the register read/write code to use the register map API. We still need some wm831x specific code and locking in place to check that the user key is handled correctly but only on the write side, reads are not affected by the key. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add devices for WM831x clocking moduleMark Brown2011-07-311-0/+12
| | | | | | | | With the new generic clk API that should appear at some point we should be able to support the clocking sensibly in Linux. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Ensure value written by wm831x_set_bits() is within the maskMark Brown2011-07-311-1/+1
| | | | | | | Purely for defensiveness. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Refactor wm831x AUXADC handling into a separate fileMark Brown2011-07-311-166/+1
| | | | | | | | | In preparation for some additional work on the wm831x AUXADC code move the support into a separate file. This is a simple code motion patch, there should be no functional changes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Read wm831x AUXADC conversion results before acknowledging interruptMark Brown2011-07-311-16/+31
| | | | | | | | | | Ensure that there's no possibility of loosing an AUXADC interrupt by reading the conversion result in the IRQ handler when using interrupts. Otherwise it's possible that under very heavy load a new conversion could be initiated before the acknowledgement for a previous interrupt has happened. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Only register wm831x RTC device if the 32.768kHz crystal is enabledMark Brown2011-07-311-20/+28
| | | | | | | | | The RTC uses the 32.768kHz crystal so if it's not enabled (and it can only be enabled via OTP or InstantConfig, not runtime software) the RTC can't function. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Allow touchscreen to be disabled on wm831x devicesMark Brown2011-07-311-10/+17
| | | | | | | | | Allow platform data to flag the touchscreen as disabled so that if the touch driver is built in we don't end up causing lots of work by spuriously detecting touchscreen activity on systems where it isn't in use. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Implement support for multiple WM831x devicesMark Brown2011-07-311-6/+12
| | | | | | | Systems using this functionality will be uncommon. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Provide platform data for WM831x GPIO configurationMark Brown2011-05-261-1/+12
| | | | | | | | | | | | | | Allow the GPIO mode of WM831x devices to be configured using platform data. Users may provide a table of GPIO register values in gpio_defaults[]. In order to allow 0 to be set explicitly out of range values are accepted and masked off, with a WM831X_GPIO_CONFIGURE define provided to set an out of range value. This can be used to configure higher numbered GPIOs or override values set in OTP for GPIOs configured using OTP. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add WM8326 supportMark Brown2011-01-141-0/+7
| | | | | | | | The WM8326 is a high performance variant of the WM832x series with no software visible differences. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Simplify WM832x subdevice instantiationMark Brown2011-01-141-10/+0
| | | | | | | | All the current WM832x devices have the same set of subdevices so can just use multiple case statements with a single body. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Support additional parent IDs for wm831xMark Brown2010-12-221-1/+5
| | | | | | | | | Some newer device revisions add a second parent ID. Support this in the device validity checks done at startup. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Supply IRQ base for WM832x devicesMark Brown2010-12-221-1/+1
| | | | | | | | | Without this the IRQ base will not be correctly configured for the subdevices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Factor out WM831x I2C I/O from the core driverMark Brown2010-10-291-134/+4
| | | | | | | | | | | | In preparation for the addition of SPI support for the WM831x move the I2C specific code into a separate file with a separate Kconfig option so the I2C support can be excluded from the build. Also update the 1133-EV1 PMIC module support for SMDK6410 to use the new symbol. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add WM8325 supportMark Brown2010-10-291-0/+14
| | | | | | | | | The WM8325 is a PMIC for low power, high performance applications. From a software point of view the device is identical to the WM8320, all the differences are at the hardware level. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Fix incorrect kfree(i2c) in wm831x-core i2c_driver probeAxel Lin2010-08-121-3/+1
| | | | | | | | The i2c_client received in probe() should not be kfree()'d. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add WM8321 supportMark Brown2010-08-121-0/+14
| | | | | | | | | The WM8321 is a PMIC for low power, high performance applications. From a software point of view the device is identical to the WM8320, all the differences between the two devices are visible only in hardware. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Ensure WM831x charger interrupts are acknowledged when suspendingMark Brown2010-05-281-0/+47
| | | | | | | | | | | | | | | | The charger interrupts on the WM831x are unconditionally a wake source for the system. If the power driver is not able to monitor them (for example, due to the IRQ line not having been wired up on the system) then any charger interrupt will prevent the system suspending for any meaningful amount of time since nothing will ack them. Avoid this issue by manually acknowledging these interrupts when we suspend the WM831x core device if they are masked. If software is actually using the interrupts then they will be unmasked and this change will have no effect. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Improve WM831x AUXADC completion handlingMark Brown2010-05-281-17/+48
| | | | | | | | | | | | | | | | | | | | Currently completion of WM831x AUXADC conversions is monitored by checking for convertor enable. Due to the mechanism used to ensure data corruption is avoided when reading AUXADC data there may under heavy I/O be a window where this bit has cleared but the conversion results have not been updated. Data availability is only guaranteed after the AUXADC data interrupt has been asserted. Avoid this by always using the interrupt to detect completion. If the chip IRQ is not set up then we poll the IRQ status register for up to 5ms. If it is set up then we rely on the data done interrupt with a vastly increased timeout, failing the conversion if the interrupt is not generated. This also saves a register read when using interrupts. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Clean up after WM83xx AUXADC interrupt if it arrives lateMark Brown2010-05-131-0/+3
| | | | | | | | | | | | | | | | | | In certain circumstances, especially under heavy load, the AUXADC completion interrupt may be detected after we've timed out waiting for it. That conversion would still succeed but the next conversion will see the completion that was signalled by the interrupt for the previous conversion and therefore not wait for the AUXADC conversion to run, causing it to report failure. Provide a simple, non-invasive cleanup by using try_wait_for_completion() to ensure that the completion is not signalled before we wait. Since the AUXADC is run within a mutex we know there can only have been at most one AUXADC interrupt outstanding. A more involved change should follow for the next merge window. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* mfd: Use completion interrupt for WM831x AUXADCMark Brown2010-03-071-7/+29
| | | | | | | | | | | | | | Use the completion interrupt generated by the device rather than polling for conversions to complete. As a backup we still check the status of the AUXADC if we don't get a completion, mostly for systems that don't have the WM831x interrupt infrastructure hooked up. Also reduce the timeout for completion of conversions to 5ms from the previous 10ms, the lower timeout should be sufficient. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add WM831x revision B supportMark Brown2010-03-071-0/+15
| | | | | | | | | | | | | | | Revision B of the WM831x devices changes the sense of the tristate bit for GPIO configuration, inverting it to become an enable instead. Take account of this in the gpiolib driver. A current sink regulation status bit has also been added in revision B, add a flag indicating if it's present but don't use it yet. This revision also adds an interrupt on key up for the ON pin event which the existing code is able to take advantage of. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* Merge git://git.infradead.org/battery-2.6Linus Torvalds2009-12-151-0/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/battery-2.6: power_supply_sysfs: Handle -ENODATA in a special way wm831x_backup: Remove unused variables gta02: Set pcf50633 charger_reference_current_ma pcf50633: Query charger status directly pcf50633: Properly reenable charging when the supply conditions change pcf50633: Get rid of charging restart software auto-triggering pcf50633: introduces battery charging current control pcf50633: Add ac power supply class to the charger wm831x: Factor out WM831x backup battery charger
| * wm831x: Factor out WM831x backup battery chargerMark Brown2009-11-161-0/+9
| | | | | | | | | | | | | | | | | | | | | | The backup battery on WM831x is a separate IP block to the main PMU and is largely unrelated to the main supply functionality. Factor it out into a separate driver in order to reflect this and better support future hardware versions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* | mfd: Move WM831x to generic IRQMark Brown2009-12-131-4/+5
| | | | | | | | | | | | | | | | | | | | | | Replace the wm831x-local IRQ infrastructure with genirq, allowing access to the diagnostic infrastructure of genirq and allowing us to implement interrupt support for the GPIOs. The switchover is done within the wm831x specific IRQ API, further patches will convert the individual drivers to use genirq directly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | mfd: Add support for WM8320 PMICsMark Brown2009-12-131-0/+159
| | | | | | | | | | | | | | | | | | | | The WM8320 is an integrated power management subsystem providing voltage regulators, RTC, watchdog and other functionality. The WM8320 is derived from the WM831x and therefore shares most of the driver code with the WM831x. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | gpiolib: Make WM831x GPIO count dynamicMark Brown2009-12-131-0/+3
| | | | | | | | | | | | | | This supports future devices with fewer GPIOs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | mfd: Refactor WM831x chip identificationMark Brown2009-12-131-40/+18
| | | | | | | | | | | | | | | | | | Better support future device revisions by moving some of the output around and making the chip ID enumeration be the value expected in the ID register. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | mfd: Correct WM831X_MAX_ISEL_VALUEMark Brown2009-12-011-1/+1
|/ | | | | | | | | There was confusion between the array size and the highest ISEL value possible. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Export ISEL values from WM831x coreMark Brown2009-09-171-0/+64
| | | | | | | | | | | The current settings which can be used with the WM831x current sinks can't easily be mapped between register values and currents at run time without a lookup table since the values scale logarithmically to match the way the human eye interprets brightness. This lookup table is inclided in the core since several drivers need to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add basic WM831x OTP supportMark Brown2009-09-171-0/+4
| | | | | | | | | | | | | | The WM831x series of devices use OTP (One Time Programmable, a type of PROM) to store system configuration. At run time this data is visible via registers. Currently the only explicitly supported feature is that the unique ID provided by every WM831x device is exported to user space via sysfs. Other configuration data may be read by system-specific code in the pre_init() and post_init() platform data operations. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Conditionally add WM831x backlight subdeviceMark Brown2009-09-171-0/+15
| | | | | | | | | | | The WM831x backlight driver requires at least the specification of the current sink to use and a maximum current to allow them to function and will actively interfere with other users of the regulators it uses if misconfigured so only register the subdevice for it if this platform data has been supplied. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add WM831x AUXADC supportMark Brown2009-09-171-0/+101
| | | | | | | | | | | | | | | | | The WM831x contains an auxiliary ADC with a number of switchable inputs which is used to monitor some of the voltages and temperatures in the system and has some external inputs which can be used for machine specific purposes. Provide an API allowing drivers to read values from the ADC. An internal reference voltage is provided to allow callibration of the ADC. This is used to calibrate the device at startup. The hardware also supports continuous readings and digital comparators. These are not yet supported by the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Add WM831x interrupt supportMark Brown2009-09-171-2/+10
| | | | | | | | | | | | | | | | The WM831x includes an interrupt controller managing interrupts for the various functions on the chip. This patch adds support for the core interrupt block on the device. Ideally this would be supported by genirq, particularly for the GPIOs, but currently genirq is unable to cope with controllers on interrupt driven buses so we cut'n'paste the generic interface. Once genirq is able to cope chips like this it should be a case of filing the prefixes off the code and redoing wm831x-irq.c to move over. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Initial core support for WM831x series devicesMark Brown2009-09-171-0/+1357
The WM831x series of devices are register compatible processor power management subsystems, providing regulator and power path management facilities along with other services like watchdog, RTC and touch panel controllers. This patch adds very basic support, providing basic single register I2C access, handling of the security key and registration of the devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
OpenPOWER on IntegriCloud