summaryrefslogtreecommitdiffstats
path: root/drivers/media
Commit message (Collapse)AuthorAgeFilesLines
* media: lirc: implement reading scancodeSean Young2017-12-145-15/+117
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This implements LIRC_MODE_SCANCODE reading from the lirc device. The scancode can be read from the input device too, but with this interface you get the rc protocol, keycode, toggle and repeat status in addition to just the scancode. int main() { int fd, mode, rc; fd = open("/dev/lirc0", O_RDWR); mode = LIRC_MODE_SCANCODE; if (ioctl(fd, LIRC_SET_REC_MODE, &mode)) { // kernel too old or lirc does not support transmit } struct lirc_scancode scancode; while (read(fd, &scancode, sizeof(scancode)) == sizeof(scancode)) { printf("protocol:%d scancode:0x%x toggle:%d repeat:%d\n", scancode.rc_proto, scancode.scancode, !!(scancode.flags & LIRC_SCANCODE_FLAG_TOGGLE), !!(scancode.flags & LIRC_SCANCODE_FLAG_REPEAT)); } close(fd); } Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: lirc: remove last remnants of lirc kapiSean Young2017-12-144-135/+55
| | | | | | | | | | | | rc-core has replaced the lirc kapi many years ago, and now with the last driver ported to rc-core, we can finally remove it. Note this has no effect on userspace. All future IR drivers should use the rc-core api. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: lirc: remove name from lirc_devSean Young2017-12-142-8/+3
| | | | | | | This is a duplicate of rcdev->driver_name. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: lirc: create rc-core open and close lirc functionsSean Young2017-12-142-67/+60
| | | | | | | | Replace the generic kernel lirc api with ones which use rc-core, further reducing the lirc_dev members. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: lirc: do not call close() or open() on unregistered devicesSean Young2017-12-141-5/+9
| | | | | | | | | | | | | If a lirc chardev is held open after a device is unplugged, rc_close() will be called after rc_unregister_device(). The driver is not expecting any calls at this point, and the iguanair driver causes an oops in this scenario. rc_open() can be called when the device is removed too, by calling open on the chardev whilst the device is being removed. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: lirc: move lirc_dev->attached to rc_dev->registeredSean Young2017-12-143-9/+21
| | | | | | | | This is done to further remove the lirc kernel api. Ensure that every fops checks for this. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: lirc: use kfifo rather than lirc_buffer for raw IRSean Young2017-12-142-197/+83
| | | | | | | | | | Since the only mode lirc devices can handle is raw IR, handle this in a plain kfifo. Remove lirc_buffer since this is no longer needed. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: lirc: merge lirc_dev_fop_ioctl and ir_lirc_ioctlSean Young2017-12-142-91/+50
| | | | | | | | | | | Calculate lirc features when necessary, and add LIRC_{S,G}ET_REC_MODE cases to ir_lirc_ioctl. This makes lirc_dev_fop_ioctl() unnecessary since all cases are already handled by ir_lirc_ioctl(). Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: rc: document and fix rc_validate_scancode()Sean Young2017-12-141-2/+16
| | | | | | | | For some IR protocols, some scancode values not valid, i.e. they're part of a different protocol variant. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: lirc: validate scancode for transmitSean Young2017-12-143-20/+44
| | | | | | | Ensure we reject an attempt to transmit invalid scancodes. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: lirc: lirc interface should not be a raw decoderSean Young2017-12-148-219/+124
| | | | | | | | | | | | | | | | | | The lirc user interface exists as a raw decoder, which does not make much sense for transmit-only devices. In addition, we want to have lirc char devices for devices which do not use raw IR, i.e. scancode only devices. Note that rc-code, lirc_dev, ir-lirc-codec are now calling functions of each other, so they've been merged into one module rc-core to avoid circular dependencies. Since ir-lirc-codec no longer exists as separate codec module, there is no need for RC_DRIVER_IR_RAW_TX type drivers to call ir_raw_event_register(). Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: rc: auto load encoder if necessarySean Young2017-12-143-1/+4
| | | | | | | When sending scancodes, load the encoder if we need it. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: lirc: use the correct carrier for scancode transmitSean Young2017-12-1411-11/+57
| | | | | | | If the lirc device supports it, set the carrier for the protocol. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: lirc: implement scancode sendingSean Young2017-12-142-28/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This introduces a new lirc mode: scancode. Any device which can send raw IR can now also send scancodes. int main() { int mode, fd = open("/dev/lirc0", O_RDWR); mode = LIRC_MODE_SCANCODE; if (ioctl(fd, LIRC_SET_SEND_MODE, &mode)) { // kernel too old or lirc does not support transmit } struct lirc_scancode scancode = { .scancode = 0x1e3d, .rc_proto = RC_PROTO_RC5, }; write(fd, &scancode, sizeof(scancode)); close(fd); } The other fields of lirc_scancode must be set to 0. Note that toggle (rc5, rc6) and repeats (nec) are not implemented. Nor is there a method for holding down a key for a period. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: lirc: remove LIRCCODE and LIRC_GET_LENGTHSean Young2017-12-142-13/+0
| | | | | | | | | LIRCCODE is a lirc mode where a driver produces driver-dependent codes for receive and transmit. No driver uses this any more. The LIRC_GET_LENGTH ioctl was used for this mode only. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: i2c: enable i2c IR for hardware which isn't HD-PVRSean Young2017-12-141-0/+9
| | | | | | | | | | | | | | | This is a fix for commit 329d88da4df9 ("[media] media: i2c: Don't export ir-kbd-i2c module alias") that stopped the module from being loaded automagically. The problems described only affect the HD-PVR, so it should not affect other hardware; also if the module happens to be loaded, the i2c IR part of the HD-PVR will be enabled anyway. Fixes: 329d88da4df9 ("[media] media: i2c: Don't export ir-kbd-i2c module alias") Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: rc: implement zilog transmitterSean Young2017-12-141-8/+428
| | | | | | | | | | | | | | | | This code implements the transmitter which is currently implemented in the staging lirc_zilog driver. The new code does not need a signal database, iow. the haup-ir-blaster.bin firmware file is no longer needed, and the driver does not know anything about the keycodes in that file. Instead, the new driver can send raw IR, but the hardware is limited to few different lengths of pulse and spaces, so it is best to use generated IR rather than recorded IR. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: merge ir_tx_z8f0811_haup and ir_rx_z8f0811_haup i2c devicesSean Young2017-12-149-87/+30
| | | | | | | | | | | | These two devices ids are really just one device with multiple addresses. Probing becomes much simpler if we simply fold this into one i2c device with two address. Note that this breaks the lirc_zilog driver, however we will teach ir-kbd-i2c to do what lirc_zilog does in a later commit. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: rc: i2c: only poll if the rc device is openedSean Young2017-12-141-4/+21
| | | | | | | | The lirc_zilog driver only polls the device if the lirc chardev is opened; do the same with the rc-core driver. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: rc: i2c: use dev_dbg rather hand-rolled debugSean Young2017-12-141-36/+25
| | | | | | | | Use the dev_dbg dynamic infrastructure instead of rolling our own custom debug logic. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: rc: i2c: set parent of rc device and improve nameSean Young2017-12-142-9/+5
| | | | | | | | | | | | | | | | | | | | With the parent set for the rc device, the messages clearly state that it is attached via i2c. The additional printk is unnecessary. These are the old messages: rc rc1: i2c IR (Hauppauge WinTV PVR-150 as /devices/virtual/rc/rc1 ir-kbd-i2c: i2c IR (Hauppauge WinTV PVR-150 detected at i2c-10/10-0071/ir0 [ivtv i2c driver #0] Now we simply get: rc rc1: Hauppauge WinTV PVR-150 as /devices/pci0000:00/0000:00:1e.0/0000:02:00.0/i2c-10/10-0071/rc/rc1 Note that we no longer copy the name. I've checked all call sites to verfiy this is not a problem. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: xilinx-video: fix bad of_node_put() on endpoint errorAkinobu Mita2017-12-141-12/+4
| | | | | | | | | | | | | | | When iterating through all endpoints using of_graph_get_next_endpoint(), the refcount of the returned endpoint node is incremented and the refcount of the node which is passed as previous endpoint is decremented. So the caller doesn't need to call of_node_put() for each iterated node except for error exit paths. Otherwise we get "OF: ERROR: Bad of_node_put() on ..." messages. Cc: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: bt8xx: Fix err 'bt878_probe()'Christophe JAILLET2017-12-141-2/+1
| | | | | | | | | | | | This is odd to call 'pci_disable_device()' in an error path before a coresponding successful 'pci_enable_device()'. Return directly instead. Fixes: 77e0be12100a ("V4L/DVB (4176): Bug-fix: Fix memory overflow") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dvb_ca_en50221: sanity check slot number from userspaceColin Ian King2017-12-141-0/+3
| | | | | | | | | | | | | | | Currently a user can pass in an unsanitized slot number which will lead to and out of range index into ca->slot_info. Fix this by checking that the slot number is no more than the allowed maximum number of slots. Seems that this bug has been in the driver forever. Detected by CoverityScan, CID#139381 ("Untrusted pointer read") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jasmin Jessich <jasmin@anw.at> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: siano: fix a potential integer overflowGustavo A. R. Silva2017-12-141-1/+1
| | | | | | | | | | | Add suffix ULL to constant 65535 in order to avoid a potential integer overflow. This constant is used in a context that expects an expression of type u64. Addresses-Coverity-ID: 1056806 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dvbsky: MyGica T230C supportStefan Brüns2017-12-142-0/+89
| | | | | | | | | | | Mygica T230 DVB-T/T2/C USB stick support. It uses the same FX2/Si2168 bridge/demodulator combo as the other devices supported by the driver, but uses the Si2141 tuner. Several DVB-T (MPEG2) and DVB-T2 (H.265) channels were tested, as well as the included remote control. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: ddbridge: improve error handling logic on fe attach failuresDaniel Scheller2017-12-131-27/+22
| | | | | | | | | | | | This change makes sure that demod frontends are always detached whenever a tuner frontend attach failed. Achieve this by moving the detach-on- failure logic at the end of dvb_input_attach(), and adding a goto to this block on every tuner attach failure case, so if an error occurs, there are no stray attached frontends left. As a side effect, this removes some duplicated code. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: drivers: media: remove duplicate includesPravin Shedge2017-12-133-6/+0
| | | | | | | | These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: platform: sti: Adopt SPDX identifierBenjamin Gaignard2017-12-1336-77/+36
| | | | | | | | | | Add SPDX identifiers to files under sti directory Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Acked-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dvb_frontend: Add commands implementation for compat ioctJaedon Shin2017-12-131-0/+131
| | | | | | | | | | The dtv_properties structure and the dtv_property structure are different sizes in 32-bit and 64-bit system. This patch provides FE_SET_PROPERTY and FE_GET_PROPERTY ioctl commands implementation for 32-bit user space applications. Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dvb_frontend: Add compat_ioctl callbackJaedon Shin2017-12-131-0/+12
| | | | | | | | Adds compat_ioctl for 32-bit user space applications on a 64-bit system. [m.chehab@osg.samsung.com: add missing include compat.h] Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dvb_frontend: Add unlocked_ioctl in dvb_frontend.cJaedon Shin2017-12-131-3/+14
| | | | | | | | Adds unlocked ioctl function directly in dvb_frontend.c instead of using dvb_generic_ioctl(). Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dvb_usb_pctv452e: module refcount changes were unbalancedWolfgang Rohdewald2017-12-131-0/+8
| | | | | | | | | | | | dvb_frontend will call dvb_detach for: - stb0899_detach in dvb_frontend_release and - stb0899_release in __dvb_frontend_free But we only do dvb_attach(stb0899_attach). Increment the module refcount instead. Signed-off-by: Wolfgang Rohdewald <wolfgang@rohdewald.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dvb_frontend: fix ifnullfree.cocci warningsFengguang Wu2017-12-131-2/+1
| | | | | | | | | | | | | | | | | drivers/media/dvb-core/dvb_frontend.c:154:2-7: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values. NULL check before some freeing functions is not needed. Based on checkpatch warning "kfree(NULL) is safe this check is probably not required" and kfreeaddr.cocci by Julia Lawall. Generated by: scripts/coccinelle/free/ifnullfree.cocci Fixes: b1cb7372fa82 ("dvb_frontend: don't use-after-free the frontend struct") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dvb-frontends/stv0910: remove unneeded dvb_math.h includeDaniel Scheller2017-12-131-1/+0
| | | | | | | Since nothing from dvb_math.h is used, remove the unneeded include. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dvb-frontends/stv0910: remove unneeded symbol rate inquiryDaniel Scheller2017-12-131-2/+0
| | | | | | | | | | | | tracking_optimization() doesn't make use of the symbol rate reported by the demodulator, so remove the unneeded inquiry and the now unneeded variable. Reported-by: Richard Scobie <rascobie@slingshot.co.nz> Cc: Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Tested-by: Richard Scobie <rascobie@slingshot.co.nz> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dvb-frontends/stv0910: read symbolrate in get_frontend()Daniel Scheller2017-12-131-0/+5
| | | | | | | | | | | | Utilise get_cur_symbol_rate() in get_frontend() to update the dtv_frontend_properties with the current symbol rate as reported by the demodulator. Reported-by: Richard Scobie <rascobie@slingshot.co.nz> Cc: Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Tested-by: Richard Scobie <rascobie@slingshot.co.nz> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dvb-frontends/stv0910: remove unneeded check/call to get_if_freqDaniel Scheller2017-12-131-3/+0
| | | | | | | | | | | | | The result (if any) isn't used anywhere besides being assigned to a local variable (and the only current companion stv6111 doesn't even implement get_if_frequency()), thus remove the ptr check and the call, and also remove the now unused iffreq variable. Reported-by: Richard Scobie <rascobie@slingshot.co.nz> Cc: Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Tested-by: Richard Scobie <rascobie@slingshot.co.nz> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dvb-frontends/stv6111: handle gate_ctrl errorsDaniel Scheller2017-12-131-17/+27
| | | | | | | | | When a parent (demod) driver encounters and signals a problem with gate_ctrl(), don't blindly continue poking the I2C bus. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Tested-by: Richard Scobie <rascobie@slingshot.co.nz> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dvb-frontends/stv0910: WARN_ON() on consecutive mutex_unlock()Daniel Scheller2017-12-131-2/+4
| | | | | | | | | | | Stack dump when gate_ctrl() is called in a way that consecutive unlocks happen. This is a clear indication that other drivers interfacing with the stv0910 driver don't do things properly or don't check for failures, so dump stack so that those drivers can be identified and fixed. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Tested-by: Richard Scobie <rascobie@slingshot.co.nz> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: frontends/stv0910: add field offsets to field definesDaniel Scheller2017-12-131-927/+927
| | | | | | | | | | | | | Each field (FSTV0910_XX) is declared as reg/off/unused/sign/mask. Add the missing offset value to the defines. Picked up from dddvb master, commit 8a1f27c3d22c ("add field offset to field defines") by Ralph Metzler <rjkm@metzlerbros.de>, adapted to match the comment style in the mainline driver. Cc: Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dvb_frontend: remove redundant status self assignmentColin Ian King2017-12-132-4/+0
| | | | | | | | The assignment status to itself is redundant and can be removed. Detected with Coccinelle. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dib0700: add support for Xbox One Digital TV TunerOlli Salonen2017-12-135-2/+139
| | | | | | | | | | | | | | Xbox One Digital TV Tuner is a low-cost USB 2.0 multistandard TV tuner. It supports DVB-T, DVB-T2 and DVB-C broadcast standards. USB bridge: DibCom 0700C Demodulator: Panasonic MN88472 Tuner: TDA18250BHN The demodulator requires firmware. Download one from here: http://palosaari.fi/linux/v4l-dvb/firmware/MN88472/02/latest/ Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: tda18250: support for new silicon tunerOlli Salonen2017-12-135-0/+1106
| | | | | | | | | NXP TDA18250 silicon tuner driver. Version 4 includes some checkpatch fixes. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dvb-frontends/stv0367: remove redundant self assignment of temporaryColin Ian King2017-12-131-2/+0
| | | | | | | | The self assignment of temporary is redundant and can be removed. Detected using coccinelle. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: stb0899: remove redundant self assignment of k_indirectColin Ian King2017-12-131-2/+1
| | | | | | | | The self assignment of k_indirect is redundant and can be removed. Detected using coccinelle. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: c8sectpfe: Use resource_size function on memory resourceVasyl Gomonovych2017-12-131-1/+1
| | | | | | | | | | | To adapt fei->sram_size calculation via resource_size for memory size calculation before, in fei->sram = devm_ioremap_resource(dev, res). And make memory initialization range in memset_io for fei->sram appropriate Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: c8sectpfe: fix potential NULL pointer dereference in ↵Gustavo A. R. Silva2017-12-131-1/+3
| | | | | | | | | | | | | | | | c8sectpfe_timer_interrupt _channel_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _channel_ has been null checked. This issue was detected with the help of Coccinelle. Fixes: c5f5d0f99794 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: c8sectpfe: DVB_C8SECTPFE should depend on HAS_DMAGeert Uytterhoeven2017-12-131-1/+1
| | | | | | | | | | | If NO_DMA=y: ERROR: "bad_dma_ops" [drivers/media/platform/sti/c8sectpfe/c8sectpfe.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dibx000_common: Fix line continuation formatJoe Perches2017-12-121-4/+4
| | | | | | | Line continuations with excess spacing causes unexpected output. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
OpenPOWER on IntegriCloud