summaryrefslogtreecommitdiffstats
path: root/drivers/irqchip
Commit message (Collapse)AuthorAgeFilesLines
* irqchip/gic-v3-its: Limit scope of VPE mapping to be per ITSMarc Zyngier2017-10-191-0/+75
| | | | | | | | | | | | | | | | | | | So far, we map all VPEs on all ITSs. While this is not wrong, this is quite a big hammer, as moving a VPE around requires all ITSs to be synchronized. Needles to say, this is an expensive proposition. Instead, let's switch to a mode where we issue VMAPP commands only on ITSs that are actually involved in reporting interrupts to the given VM. For that purpose, we refcount the number of interrupts are are mapped for this VM on each ITS, performing the map/unmap operations as required. It then allows us to use this refcount to only issue VMOVP to the ITSs that need to know about this VM. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/gic-v3-its: Make its_send_vmapp operate on a single ITSMarc Zyngier2017-10-191-11/+12
| | | | | | | | | Currently, its_send_vmapp operates on all ITSs. As we're about to try and limit the amount of commands we send to ITSs that are not involved in dealing with a given VM, let's redefine that primitive so that it takes a target ITS as a parameter. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/gic-v3-its: Make its_send_vinvall operate on a single ITSMarc Zyngier2017-10-191-10/+24
| | | | | | | | | Currently, its_send_vinvall operates on all ITSs. As we're about to try and limit the amount of commands we send to ITSs that are not involved in dealing with a given VM, let's redefine that primitive so that it takes a target ITS as a parameter. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/gic-v3-its: Make GICv4_ITS_LIST_MAX globally availableMarc Zyngier2017-10-191-8/+2
| | | | | | | | As we're about to make use of the maximum number of ITSs in a GICv4 system, let's make this value global (and rename it to GICv4_ITS_LIST_MAX). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/gic-v3-its: Track per-ITS list numberMarc Zyngier2017-10-191-0/+3
| | | | | | | | | At boot time, we enumerate all the GICv4-capable ITSs, and build a mask of the available ITSs. Take this opportunity to store the ITS number in the its_node structure so that we can use it at a later time. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/gic-v3-its: Workaround HiSilicon Hip07 redistributor addressingMarc Zyngier2017-10-191-2/+28
| | | | | | | | | | | The ITSes on the Hip07 (as present in the Huawei D05) are broken when it comes to addressing the redistributors, and need to be explicitely told to address the VLPI page instead of the redistributor base address. So let's add yet another quirk, fixing up the target address in the command stream. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/gic-v3-its: Pass its_node pointer to each command builderMarc Zyngier2017-10-191-20/+38
| | | | | | | | In order to be able to issue command variants depending on how broken an ITS is, let's pass the its pointer to all command building primitives. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/gic-v3-its: Add post-mortem info on command timeoutMarc Zyngier2017-10-191-6/+10
| | | | | | | | | | | If the ITS stops processing commands, we're pretty much toasted as we cannot update the configuration anymore (and we're not even sure that the ITS still translates interrups). If that happens, let's dump some basic information about the state of affairs before moving on. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/gic-v3: Add workaround for Synquacer pre-ITSArd Biesheuvel2017-10-191-2/+70
| | | | | | | | | | | | | | | | The Socionext Synquacer SoC's implementation of GICv3 has a so-called 'pre-ITS', which maps 32-bit writes targeted at a separate window of size '4 << device_id_bits' onto writes to GITS_TRANSLATER with device ID taken from bits [device_id_bits + 1:2] of the window offset. Writes that target GITS_TRANSLATER directly are reported as originating from device ID #0. So add a workaround for this. Given that this breaks isolation, clear the IRQ_DOMAIN_FLAG_MSI_REMAP flag as well. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/gic: Make quirks matching conditional on init return valueArd Biesheuvel2017-10-193-6/+13
| | | | | | | | | | | As it turns out, the IIDR is not sufficient to distinguish between GICv3 implementations when it comes to enabling quirks. So update the prototype of the init() hook to return a bool, and interpret a 'false' return value as no match, in which case the 'enabling workaround' log message should not be printed. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/gic-v3: Probe device ID space before quirks handlingArd Biesheuvel2017-10-191-12/+6
| | | | | | | | | | | Before adding another SoC whose device ID space deviates from the value presented in the GIC ID registers, let's slightly refactor the code so that the ID registers are probed before that quirks handling executes. This allows us to move the device ID override into the quirk handler itself. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/gic-v3: Add support for Range Selector (RS) featureShanker Donthineni2017-10-191-9/+41
| | | | | | | | | | | | | | | | | | | | | | | | | A new feature Range Selector (RS) has been added to GIC specification in order to support more than 16 CPUs at affinity level 0. New fields are introduced in SGI system registers (ICC_SGI0R_EL1, ICC_SGI1R_EL1 and ICC_ASGI1R_EL1) to relax an artificial limit of 16 at level 0. - A new RSS field in ICC_CTLR_EL3, ICC_CTLR_EL1 and ICV_CTLR_EL1: [18] - Range Selector Support (RSS) 0b0 = Targeted SGIs with affinity level 0 values of 0-15 are supported. 0b1 = Targeted SGIs with affinity level 0 values of 0-255 are supported. - A new RS field in ICC_SGI0R_EL1, ICC_SGI1R_EL1 and ICC_ASGI1R_EL1: [47:44] - RangeSelector (RS) which group of 16 TargetList[n] field TargetList[n] represents aff0 value ((RS*16)+n) When ICC_CTLR_EL3.RSS==0 or ICC_CTLR_EL1.RSS==0, RS is RES0. - A new RSS field in GICD_TYPER: [26] - Range Selector Support (RSS) 0b0 = Targeted SGIs with affinity level 0 values of 0-15 are supported. 0b1 = Targeted SGIs with affinity level 0 values of 0-255 are supported. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/brcmstb-l2: Add support for the BCM7271 L2 controllerDoug Berger2017-10-191-22/+64
| | | | | | | | | | | | Add the initialization of the generic irq chip for the BCM7271 L2 interrupt controller. This controller only supports level interrupts and uses the "brcm,bcm7271-l2-intc" compatibility string. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/brcmstb-l2: Abstract register accessesDoug Berger2017-10-191-9/+20
| | | | | | | | | | | | | | Added register block offsets to the brcmstb_l2_intc_data structure for the status and mask registers to support reading the active interupts in an abstracted way. It seems like an irq_chip method should have been provided for this, but it's not there yet. Abstracted the implementation of the handler, suspend, and resume functions to not use any hard coded register offsets. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/brcmstb-l2: Remove some processing from the handlerDoug Berger2017-10-191-24/+48
| | | | | | | | | | | | | | | | | | | | | Saving the generic chip pointer in the brcmstb_l2_intc_data prevents the need to call irq_get_domain_generic_chip(). Also don't need to save parent_irq and base there since local variables in the brcmstb_l2_intc_of_init() function are just as good. The handle_edge_irq flow or chained_irq_enter takes care of the acknowledgment of the interrupt so it is redundant to clear it in brcmstb_l2_intc_irq_handle(). irq_linear_revmap() is a fast path equivalent of irq_find_mapping() that is appropriate to use for domain controllers of this type. Defining irq_mask_ack is slightly more efficient than just implementing irq_mask and irq_ack separately. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/renesas-intc-irqpin: Use of_device_get_match_data() helperGeert Uytterhoeven2017-10-191-6/+3
| | | | | | | | | Use the of_device_get_match_data() helper instead of open coding. Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip: Add Kconfig menuRandy Dunlap2017-10-161-0/+4
| | | | | | | | | | | | | | Add a menu for IRQ chip drivers. This makes the Device drivers menu be more consistent (listing "subsystems" instead of specific options) and makes the IRQCHIP options be listed in expected places for 'make menu|xconfig'. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Cooper <jason@lakedaemon.net> Link: https://lkml.kernel.org/r/3db7385a-c6a1-5c93-0797-6f4b6b2b2cde@infradead.org
* irqchip/irq-omap-intc: Do not statically initialize variablesLadislav Michl2017-10-161-2/+2
| | | | | | | | | | | | | | | omap_nr_pending and omap_nr_irqs variables are initialized right at the beginning of intc_of_init function, so there's no need to statically initialize them. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Link: https://lkml.kernel.org/r/20171016161303.veumgcd3xom5c54r@lenoch
* irqchip/irq-omap-intc: Remove omap3_init_irq()Ladislav Michl2017-10-161-12/+0
| | | | | | | | | | | | | | All mach-omap2 variants are device tree only now, so this function is dead code. Remove it. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-omap@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Link: https://lkml.kernel.org/r/20171016160422.uu2i7vvrgy7cc4aw@lenoch
* genirq/irqdomain: Update irq_domain_ops.activate() signatureThomas Gleixner2017-09-251-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The irq_domain_ops.activate() callback has no return value and no way to tell the function that the activation is early. The upcoming changes to support a reservation scheme which allows to assign interrupt vectors on x86 only when the interrupt is actually requested requires: - A return value, so activation can fail at request_irq() time - Information that the activate invocation is early, i.e. before request_irq(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.848490816@linutronix.de
* irqchip.mips-gic: Fix shared interrupt mask writesPaul Burton2017-09-191-3/+3
| | | | | | | | | | | | | | | | | The write_gic_smask() & write_gic_rmask() functions take a shared interrupt number as a parameter, but we're incorrectly providing them a bitmask with the shared interrupt's bit set. This effectively means that we mask or unmask the shared interrupt 1<<n rather than shared interrupt n, and as a result likely drop interrupts. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 68898c8765f4 ("irqchip: mips-gic: Drop gic_(re)set_mask() functions") Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/gic-v4: Fix building with ancient gccArnd Bergmann2017-09-191-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | gcc-4.5 and earlier don't like named initializers for anonymous union members: drivers/irqchip/irq-gic-v4.c: In function 'its_map_vlpi': drivers/irqchip/irq-gic-v4.c:176:3: error: unknown field 'map' specified in initializer drivers/irqchip/irq-gic-v4.c:176:3: error: missing braces around initializer drivers/irqchip/irq-gic-v4.c:176:3: error: (near initialization for 'info.<anonymous>') drivers/irqchip/irq-gic-v4.c: In function 'its_get_vlpi': drivers/irqchip/irq-gic-v4.c:192:3: error: unknown field 'map' specified in initializer drivers/irqchip/irq-gic-v4.c:192:3: error: missing braces around initializer drivers/irqchip/irq-gic-v4.c:192:3: error: (near initialization for 'info.<anonymous>') drivers/irqchip/irq-gic-v4.c: In function 'its_prop_update_vlpi': drivers/irqchip/irq-gic-v4.c:208:3: error: unknown field 'config' specified in initializer drivers/irqchip/irq-gic-v4.c:208:3: error: missing braces around initializer drivers/irqchip/irq-gic-v4.c:208:3: error: (near initialization for 'info.<anonymous>') drivers/irqchip/irq-gic-v4.c:208:3: error: initialization makes pointer from integer without a cast This is fairly easy to work around, by using extra curly braces. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/gic-v3: Iterate over possible CPUs by for_each_possible_cpu()zijun_hu2017-09-191-4/+4
| | | | | | | | | | | | get_cpu_number() doesn't use existing helper to iterate over possible CPUs, It will cause an error in case of discontinuous @cpu_possible_mask such as 0b11110001, which can result from a core having failed to come up on a SMP machine. Fixed by using existing helper for_each_possible_cpu(). Signed-off-by: zijun_hu <zijun_hu@htc.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* Merge branch '4.14-features' of ↵Linus Torvalds2017-09-152-436/+182
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.14 for MIPS; below a summary of the non-merge commits: CM: - Rename mips_cm_base to mips_gcr_base - Specify register size when generating accessors - Use BIT/GENMASK for register fields, order & drop shifts - Add cluster & block args to mips_cm_lock_other() CPC: - Use common CPS accessor generation macros - Use BIT/GENMASK for register fields, order & drop shifts - Introduce register modify (set/clear/change) accessors - Use change_*, set_* & clear_* where appropriate - Add CM/CPC 3.5 register definitions - Use GlobalNumber macros rather than magic numbers - Have asm/mips-cps.h include CM & CPC headers - Cluster support for topology functions - Detect CPUs in secondary clusters CPS: - Read GIC_VL_IDENT directly, not via irqchip driver DMA: - Consolidate coherent and non-coherent dma_alloc code - Don't use dma_cache_sync to implement fd_cacheflush FPU emulation / FP assist code: - Another series of 14 commits fixing corner cases such as NaN propgagation and other special input values. - Zero bits 32-63 of the result for a CLASS.D instruction. - Enhanced statics via debugfs - Do not use bools for arithmetic. GCC 7.1 moans about this. - Correct user fault_addr type Generic MIPS: - Enhancement of stack backtraces - Cleanup from non-existing options - Handle non word sized instructions when examining frame - Fix detection and decoding of ADDIUSP instruction - Fix decoding of SWSP16 instruction - Refactor handling of stack pointer in get_frame_info - Remove unreachable code from force_fcr31_sig() - Convert to using %pOF instead of full_name - Remove the R6000 support. - Move FP code from *_switch.S to *_fpu.S - Remove unused ST_OFF from r2300_switch.S - Allow platform to specify multiple its.S files - Add #includes to various files to ensure code builds reliable and without warning.. - Remove __invalidate_kernel_vmap_range - Remove plat_timer_setup - Declare various variables & functions static - Abstract CPU core & VP(E) ID access through accessor functions - Store core & VP IDs in GlobalNumber-style variable - Unify checks for sibling CPUs - Add CPU cluster number accessors - Prevent direct use of generic_defconfig - Make CONFIG_MIPS_MT_SMP default y - Add __ioread64_copy - Remove unnecessary inclusions of linux/irqchip/mips-gic.h GIC: - Introduce asm/mips-gic.h with accessor functions - Use new GIC accessor functions in mips-gic-timer - Remove counter access functions from irq-mips-gic.c - Remove gic_read_local_vp_id() from irq-mips-gic.c - Simplify shared interrupt pending/mask reads in irq-mips-gic.c - Simplify gic_local_irq_domain_map() in irq-mips-gic.c - Drop gic_(re)set_mask() functions in irq-mips-gic.c - Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(), gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c. - Convert remaining shared reg access, local int mask access and remaining local reg access to new accessors - Move GIC_LOCAL_INT_* to asm/mips-gic.h - Remove GIC_CPU_INT* macros from irq-mips-gic.c - Move various definitions to the driver - Remove gic_get_usm_range() - Remove __gic_irq_dispatch() forward declaration - Remove gic_init() - Use mips_gic_present() in place of gic_present and remove gic_present - Move gic_get_c0_*_int() to asm/mips-gic.h - Remove linux/irqchip/mips-gic.h - Inline __gic_init() - Inline gic_basic_init() - Make pcpu_masks a per-cpu variable - Use pcpu_masks to avoid reading GIC_SH_MASK* - Clean up mti, reserved-cpu-vectors handling - Use cpumask_first_and() in gic_set_affinity() - Let the core set struct irq_common_data affinity microMIPS: - Fix microMIPS stack unwinding on big endian systems MIPS-GIC: - SYNC after enabling GIC region NUMA: - Remove the unused parent_node() macro R6: - Constify r2_decoder_tables - Add accessor & bit definitions for GlobalNumber SMP: - Constify smp ops - Allow boot_secondary SMP op to return errors VDSO: - Drop gic_get_usm_range() usage - Avoid use of linux/irqchip/mips-gic.h Platform changes: Alchemy: - Add devboard machine type to cpuinfo - update cpu feature overrides - Threaded carddetect irqs for devboards AR7: - allow NULL clock for clk_get_rate BCM63xx: - Fix ENETDMA_6345_MAXBURST_REG offset - Allow NULL clock for clk_get_rate CI20: - Enable GPIO and RTC drivers in defconfig - Add ethernet and fixed-regulator nodes to DTS Generic platform: - Move Boston and NI 169445 FIT image source to their own files - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Allow filtering enabled boards by requirements - Don't explicitly disable CONFIG_USB_SUPPORT - Bump default NR_CPUS to 16 JZ4700: - Probe the jz4740-rtc driver from devicetree Lantiq: - Drop check of boot select from the spi-falcon driver. - Drop check of boot select from the lantiq-flash MTD driver. - Access boot cause register in the watchdog driver through regmap - Add device tree binding documentation for the watchdog driver - Add docs for the RCU DT bindings. - Convert the fpi bus driver to a platform_driver - Remove ltq_reset_cause() and ltq_boot_select( - Switch to a proper reset driver - Switch to a new drivers/soc GPHY driver - Add an USB PHY driver for the Lantiq SoCs using the RCU module - Use of_platform_default_populate instead of __dt_register_buses - Enable MFD_SYSCON to be able to use it for the RCU MFD - Replace ltq_boot_select() with dummy implementation. Loongson 2F: - Allow NULL clock for clk_get_rate Malta: - Use new GIC accessor functions NI 169445: - Add support for NI 169445 board. - Only include in 32r2el kernels Octeon: - Add support for watchdog of 78XX SOCs. - Add support for watchdog of CN68XX SOCs. - Expose support for mips32r1, mips32r2 and mips64r1 - Enable more drivers in config file - Add support for accessing the boot vector. - Remove old boot vector code from watchdog driver - Define watchdog registers for 70xx, 73xx, 78xx, F75xx. - Make CSR functions node aware. - Allow access to CIU3 IRQ domains. - Misc cleanups in the watchdog driver Omega2+: - New board, add support and defconfig Pistachio: - Enable Root FS on NFS in defconfig Ralink: - Add Mediatek MT7628A SoC - Allow NULL clock for clk_get_rate - Explicitly request exclusive reset control in the pci-mt7620 PCI driver. SEAD3: - Only include in 32 bit kernels by default VoCore: - Add VoCore as a vendor t0 dt-bindings - Add defconfig file" * '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits) MIPS: Refactor handling of stack pointer in get_frame_info MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems MIPS: microMIPS: Fix decoding of swsp16 instruction MIPS: microMIPS: Fix decoding of addiusp instruction MIPS: microMIPS: Fix detection of addiusp instruction MIPS: Handle non word sized instructions when examining frame MIPS: ralink: allow NULL clock for clk_get_rate MIPS: Loongson 2F: allow NULL clock for clk_get_rate MIPS: BCM63XX: allow NULL clock for clk_get_rate MIPS: AR7: allow NULL clock for clk_get_rate MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset mips: Save all registers when saving the frame MIPS: Add DWARF unwinding to assembly MIPS: Make SAVE_SOME more standard MIPS: Fix issues in backtraces MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree MIPS: Ci20: Enable RTC driver watchdog: octeon-wdt: Add support for 78XX SOCs. watchdog: octeon-wdt: Add support for cn68XX SOCs. watchdog: octeon-wdt: File cleaning. ...
| * irqchip: mips-gic: Let the core set struct irq_common_data affinityPaul Burton2017-09-041-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gic_set_affinity() manually copies the provided cpumask to the struct irq_common_data affinity field, returning IRQ_SET_MASK_OK_NOCOPY in order to prevent the core code from doing that. We can instead simply let the core code do it for us, by returning IRQ_SET_MASK_OK instead of IRQ_SET_MASK_OK_NOCOPY & doing the copy ourselves. [ralf@linux-mips.org: Resolve merge conflict.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17056/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Use cpumask_first_and() in gic_set_affinity()Paul Burton2017-09-041-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently in gic_set_affinity() we calculate a temporary cpumask holding the intersection of the provided cpumask & the CPUs that are online, then we call cpumask_first twice on it to find the first such CPU. Since we don't need the temporary cpumask for anything else & we only care about the first CPU that's both online & in the provided cpumask, we can instead use cpumask_first_and to find that CPU & drop the temporary mask. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17110/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Clean up mti, reserved-cpu-vectors handlingPaul Burton2017-09-041-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When parsing mti,reserved-cpu-vectors we generate a mask of all bits that have been declared reserved, the loop through starting from bit 2 to find one that isn't reserved (ie. is zero). This patch accomplishes the same task more simply by: - Inititialising the reserved mask to 0x3 (ie. the 2 software interrupts). This means we don't need to skip them later as the loop previously has. - Replacing the loop checking for zero bits with find_first_zero_bit, which fits our needs now that the 2 software interrupts are marked reserved. This requires that the type of reserved is changed to unsigned long so that it's suitable for use with bitmap functions. - Replacing the magic number 8 with the hamming weight of the ST0_IM field - ie. the number of bits that a MIPS CPU has for interrupt inputs. This is still a compile-time constant 8, but makes it clearer why it's 8. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17054/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Use pcpu_masks to avoid reading GIC_SH_MASK*Paul Burton2017-09-041-21/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch avoids the need to read the GIC_SH_MASK* registers when decoding shared interrupts by setting & clearing the interrupt's bit in the appropriate CPU's pcpu_masks entry when masking or unmasking the interrupt. This effectively means that whilst an interrupt is masked we clear its bit in all pcpu_masks, which causes gic_handle_shared_int() to ignore it on all CPUs without needing to check GIC_SH_MASK*. In essence, we add a little overhead to masking or unmasking interrupts but in return reduce the overhead of the far more common task of decoding interrupts. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17109/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Make pcpu_masks a per-cpu variablePaul Burton2017-09-041-9/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Define the pcpu_masks variable using the kernel's standard per-cpu variable support, rather than an open-coded array of structs containing bitmaps. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17052/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Inline gic_basic_init()Paul Burton2017-09-041-27/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gic_basic_init() is now a fairly short function that is only called in one place. Inline it into gic_of_init() to help readability. [ralf@linux-mips.org: Resolved conflict.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17051/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Inline __gic_init()Paul Burton2017-09-041-60/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The __gic_init() function is only called from gic_of_init() now that the non-DT path has been removed. In order to simplify the code & aid readability, fold __gic_init() into gic_of_init(). This provides us with the ability to return an error code, which __gic_init() was previously unable to do. As such the irq_domain_add_*() error paths are modified to print & return an error rather than panic(). [ralf@linux-mips.org: Resoled reject.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17050/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Move gic_get_c0_*_int() to asm/mips-gic.hPaul Burton2017-09-041-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The linux/irqchip/mips-gic.h header is now almost empty. Move the declarations of gic_get_c0_compare_int(), gic_get_c0_perfcount_int() & gic_get_c0_fdc_int() to asm/mips-gic.h in order to close in on being able to delete the former header. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17046/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Remove gic_presentPaul Burton2017-09-041-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Nothing uses the global gic_present variable anymore; mips_gic_present() should be used instead. Remove the dead code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17045/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Remove gic_init()Paul Burton2017-09-041-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | All in-tree platforms now probe the GIC driver using device tree, and as such nothing calls gic_init() any longer. Remove the dead code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17043/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Remove __gic_irq_dispatch() forward declarationPaul Burton2017-09-041-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | We provide a forward declaration of the __gic_irq_dispatch() function for no apparent reason. Remove it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17042/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Remove gic_get_usm_range()Paul Burton2017-09-041-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The MIPS VDSO code is no longer reliant upon the irqchip driver to provide the address of the GIC's user-visible section via gic_get_usm_range(). Remove the now-dead code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17041/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Move various definitions to the driverPaul Burton2017-09-041-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the definitions of macros used to convert between hardware IRQ numbers & shared or local interrupt numbers into the irqchip driver, which is all that should ever need to care about them. Remove GIC_CPU_TO_VEC_OFFSET() in the process since it's never used. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17039/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Convert remaining local reg access to new accessorsPaul Burton2017-09-041-56/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the remaining accesses to registers in the GIC VP-local & VP-other register blocks to use the new accessor functions provided by asm/mips-gic.h, resulting in code which is often shorter & easier to read. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17036/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Convert local int mask access to new accessorsPaul Burton2017-09-041-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the new accessor functions provided by asm/mips-gic.h to access masks controlling local interrupts, resulting in code which is often shorter & easier to read. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17035/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Convert remaining shared reg access to new accessorsPaul Burton2017-09-041-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the remaining accesses to registers in the GIC shared register block to use the new accessor functions provided by asm/mips-gic.h, resulting in code which is often shorter & easier to read. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17034/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Remove gic_map_to_vpe()Paul Burton2017-09-041-9/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the gic_map_to_vpe() function in favour of using the new write_gic_map_vp() accessor function which isn't any more complex to use & allows us to drop a level of abstraction. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17033/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Remove gic_map_to_pin()Paul Burton2017-09-041-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the gic_map_to_pin() function in favour of using the new write_gic_map_pin() accessor function which isn't any more complex to use & allows us to drop a level of abstraction. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17032/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Remove gic_set_dual_edge()Paul Burton2017-09-041-23/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the gic_set_dual_edge() function in favour of using the new change_gic_dual() accessor function which provides equivalent functionality. This also allows us to remove the gic_update_bits() function which gic_set_dual_edge() was the last user of, along with the GIC_INTR_OFS() & GIC_INTR_BIT() macros. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17031/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Remove gic_set_trigger()Paul Burton2017-09-041-13/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the gic_set_trigger() function in favour of using the new change_gic_trig() accessor function which provides equivalent functionality. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17030/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Remove gic_set_polarity()Paul Burton2017-09-041-12/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the gic_set_polarity() function in favour of using the new change_gic_pol() accessor function which provides equivalent functionality. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17029/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Drop gic_(re)set_mask() functionsPaul Burton2017-09-041-15/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The gic_set_mask() & gic_reset_mask() functions are now no more convenient to call than the write_gic_smask() or write_gic_rmask() accessor functions. Remove the layer of abstraction. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17028/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Simplify gic_local_irq_domain_map()Paul Burton2017-09-041-41/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simplify gic_local_irq_domain_map() by: - Moving the check for invalid IRQs outside of the loop. - Moving the decision about whether to use gic_cpu_pin or timer_cpu_pin outside of the loop. - Using the new write_gic_vo_map() accessor function to avoid the need to handle each map register separately. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17027/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Simplify shared interrupt pending/mask readsPaul Burton2017-09-041-18/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Simplify the reads of the bitmaps indicating pending & masked interrupts in gic_handle_shared_int() using the __ioread32_copy() & __ioread64_copy() helper functions. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17026/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Remove gic_read_local_vp_id()Paul Burton2017-09-041-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Nothing needs gic_read_local_vp_id() any longer, so remove the dead code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17024/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * irqchip: mips-gic: Remove counter access functionsPaul Burton2017-09-041-95/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | The MIPS GIC clocksource driver is no longer using the accessor functions provided by the irqchip driver, so remove them. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17022/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
OpenPOWER on IntegriCloud