summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
Commit message (Collapse)AuthorAgeFilesLines
* i2c: fix i2c-sh_mobile rx underrunMagnus Damm2008-11-131-1/+2
| | | | | | | Fix receive path underrun in i2c-sh_mobile driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* i2c-s3c2410: Correct use of ! and &Julia Lawall2008-10-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | In commit e6bafba5b4765a5a252f1b8d31cbf6d2459da337, a bug was fixed that involved converting !x & y to !(x & y). The code below shows the same pattern, and thus should perhaps be fixed in the same way. In particular, the result of !readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN is always 0. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; constant C; @@ ( !E & !C | - !E & C + !(E & C) ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* scx200_i2c: Add missing class parameterLennart Sorensen2008-10-301-0/+1
| | | | | | | | | The scx200_i2c driver is missing the .class parameter, which means no i2c drivers are willing to probe for devices on the bus and attach to them. Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds2008-10-238-9/+29
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c: Add info->archdata field i2c: Inform about deprecated chips directory i2c: Use pci_ioremap_bar() Schedule removal of the legacy i2c device driver binding model i2c: Clean up <linux/i2c.h> i2c: Update and clean up writing-clients document i2c: Drop 2-byte address block transfer defines i2c: Delete legacy model documentation i2c: Constify i2c_get_clientdata's parameter i2c: Delete outdated client porting guide i2c: Make clear what the class field of i2c_adapter is good for i2c-algo-pcf: Fix typo in debugging log message i2c-algo-pcf: Add adapter hooks around xfer begin and end i2c-algo-pcf: Pass adapter data into ->waitforpin() method i2c-i801: Add support for Intel Ibex Peak
| * i2c: Add info->archdata fieldAnton Vorontsov2008-10-221-0/+3
| | | | | | | | | | | | | | | | If present the info->archdata is copied into the dev->archdata. Some (OpenFirmware) platforms need it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * i2c: Inform about deprecated chips directoryWolfram Sang2008-10-222-1/+4
| | | | | | | | | | | | | | The chips directory under drivers/i2c is deprecated. Spread the word! Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * i2c: Use pci_ioremap_bar()Arjan van de Ven2008-10-221-1/+1
| | | | | | | | | | | | | | | | | | | | Use the newly introduced pci_ioremap_bar() function in drivers/i2c. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * i2c-algo-pcf: Fix typo in debugging log messageDavid Miller2008-10-221-1/+1
| | | | | | | | | | | | | | | | | | Fix typo in debugging log message. deteted --> detected Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * i2c-algo-pcf: Add adapter hooks around xfer begin and endDavid Miller2008-10-221-4/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Some I2C bus implementations need to synchronize with external entities, such as system firmware, which might also be programming the same I2C bus. In order to facilitate this add ->xfer_begin() and ->xfer_end() hooks which are invoked around pcf_xfer(). [JD: Make these hooks optional.] Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * i2c-algo-pcf: Pass adapter data into ->waitforpin() methodDavid Miller2008-10-222-2/+3
| | | | | | | | | | | | | | Pass adapter data into ->waitforpin() method. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * i2c-i801: Add support for Intel Ibex PeakSeth Heasley2008-10-222-0/+4
| | | | | | | | | | | | | | Adds the Intel Ibex Peak (PCH) SMBus Controller Device IDs. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | Merge commit 'origin' into masterBenjamin Herrenschmidt2008-10-218-34/+59
|\ \ | |/ | | | | | | | | Manual merge of: arch/powerpc/Kconfig arch/powerpc/include/asm/page.h
| * PCI: Check dynids driver_data value for validityJean Delvare2008-10-202-8/+0
| | | | | | | | | | | | | | | | | | | | | | Only accept dynids whose driver_data value matches one of the driver's pci_driver_id entries. This prevents the user from accidentally passing values the drivers do not expect. Cc: Milton Miller <miltonm@bga.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: remove dynids.use_driver_dataMilton Miller2008-10-202-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver flag dynids.use_driver_data is almost consistently not set, and causes more problems than it solves. It was initially intended as a flag to indicate whether a driver's usage of driver_data had been carefully inspected and was ready for values from userspace. That audit was never done, so most drivers just get a 0 for driver_data when new IDs are added from userspace via sysfs. So remove the flag, allowing drivers to see the data directly (a followon patch validates the passed driver_data value against what the drivers expect). Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * x86: sysfs: kill owner field from attributeParag Warudkar2008-10-202-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tejun's commit 7b595756ec1f49e0049a9e01a1298d53a7faaa15 made sysfs attribute->owner unnecessary. But the field was left in the structure to ease the merge. It's been over a year since that change and it is now time to start killing attribute->owner along with its users - one arch at a time! This patch is attempt #1 to get rid of attribute->owner only for CONFIG_X86_64 or CONFIG_X86_32 . We will deal with other arches later on as and when possible - avr32 will be the next since that is something I can test. Compile (make allyesconfig / make allmodconfig / custom config) and boot tested. akpm: the idea is that we put the declaration of sttribute.owner inside `#ifndef CONFIG_X86'. But that proved to be too ambitious for now because new usages kept on turning up in subsystem trees. [akpm: remove the ifdef for now] Signed-off-by: Parag Warudkar <parag.lkml@gmail.com> Cc: Greg KH <greg@kroah.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tejun Heo <htejun@gmail.com> Cc: Len Brown <lenb@kernel.org> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * i2c: use bcd2bin/bin2bcdAdrian Bunk2008-10-201-17/+17
| | | | | | | | | | | | | | | | | | | | Change i2c to use the new bcd2bin/bin2bcd functions instead of the obsolete BCD2BIN/BIN2BCD macros. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * hwmon: (ams) Convert to a new-style i2c driverJean Delvare2008-10-171-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The legacy i2c binding model is phasing out, so the ams driver needs to be converted to a new-style i2c driver. Here is a naive approach of this conversion. Basically it is moving the i2c device creation from the ams driver to the i2c-powermac driver. This should work, but I suspect we could come up with something cleaner by declaring the i2c device as part of the platform setup. This could be done later by someone more familiar with openfirmware-based platforms than I am myself. One nice thing brought by this conversion is that the ams driver should be loaded automatically on systems where is is needed (at least when the I2C interface to the chip is used) providing coldplug-aware user-space environment. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Cc: Stelian Pop <stelian@popies.net> Cc: Michael Hanselmann <linux-kernel@hansmi.ch> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds2008-10-161-3/+3
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (46 commits) UIO: Fix mapping of logical and virtual memory UIO: add automata sercos3 pci card support UIO: Change driver name of uio_pdrv UIO: Add alignment warnings for uio-mem Driver core: add bus_sort_breadthfirst() function NET: convert the phy_device file to use bus_find_device_by_name kobject: Cleanup kobject_rename and !CONFIG_SYSFS kobject: Fix kobject_rename and !CONFIG_SYSFS sysfs: Make dir and name args to sysfs_notify() const platform: add new device registration helper sysfs: use ilookup5() instead of ilookup5_nowait() PNP: create device attributes via default device attributes Driver core: make bus_find_device_by_name() more robust usb: turn dev_warn+WARN_ON combos into dev_WARN debug: use dev_WARN() rather than WARN_ON() in device_pm_add() debug: Introduce a dev_WARN() function sysfs: fix deadlock device model: Do a quickcheck for driver binding before doing an expensive check Driver core: Fix cleanup in device_create_vargs(). Driver core: Clarify device cleanup. ...
| | * device create: misc: convert device_create_drvdata to device_createGreg Kroah-Hartman2008-10-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Now that device_create() has been audited, rename things back to the original call to be sane. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2008-10-161-2/+10
| |\ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (51 commits) [ARM] 5308/1: Fix Viper ISA IRQ handling [ARM] 5307/1: pxa: fix CM-X2XX PCMCIA build error [ARM] 5306/1: pxa: fix build error on CM-X270 [ARM] 5302/1: ARM: OMAP: Revert omap3 WDT changes to avoid merge conflict [ARM] 5305/1: ARM: OMAP: Fix compile of McBSP by removing unnecessary check [ARM] 5301/1: ARM: OMAP: Add missing irq defines ARM: OMAP3: Add default kernel config for OMAP LDP ARM: OMAP3: Add basic board support for OMAP LDP ARM: OMAP3: Defconfig for the Gumstix Overo board (rev 3) ARM: OMAP3: Add support for the Gumstix Overo board (rev 3) ARM: OMAP3: Add Beagle defconfig ARM: OMAP3: Add minimal Beagle board support ARM: OMAP3: Add minimal omap3430 support ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code ARM: OMAP: Fixes to omap_mcbsp_request function ARM: OMAP: Add support for OMAP2430 in McBSP ARM: OMAP: Add support for McBSP devices 3 - 5 on 34xx ARM: OMAP: Allocate McBSP devices dynamically Fix sections for omap-mcbsp platform driver [ARM] S3C24XX: Additional include moves ...
| | * Merge branch 's3c-move' into develRussell King2008-10-142-3/+5
| | |\ | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/mach-versatile/core.c
| | * \ Merge branch 'omap-all' into develRussell King2008-10-141-2/+10
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/mach-omap2/gpmc.c arch/arm/mach-omap2/irq.c
| | | * | [ARM] omap: convert OMAP drivers to use ioremap()Russell King2008-09-051-2/+10
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | | i2c-cpm: Suppress autoprobing for devicesWolfram Sang2008-10-201-1/+0
|/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to commit 618b26d52843c0f85b8eb143cf2695d7f6fd072d, also remove automatic probing for this i2c controller. Might need updates to dts files using it. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Jochen Friedrich <jochen@scram.de> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | | Merge branch 'next' of ↵Linus Torvalds2008-10-155-2/+222
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (158 commits) powerpc: Fix CHRP PCI config access for indirect_pci powerpc/chrp: Fix detection of Python PCI host bridge on IBM CHRPs powerpc: Fix 32-bit SMP boot on CHRP powerpc: Fix link errors on 32-bit machines using legacy DMA powerpc/pci: Improve detection of unassigned bridge resources hvc_console: Fix free_irq in spinlocked section powerpc: Get USE_STRICT_MM_TYPECHECKS working again powerpc: Reflect the used arguments in machine_init() prototype powerpc: Fix DMA offset for non-coherent DMA powerpc: fix fsl_upm nand driver modular build powerpc/83xx: add NAND support for the MPC8360E-RDK boards powerpc: FPGA support for GE Fanuc SBC610 i2c: MPC8349E-mITX Power Management and GPIO expander driver powerpc: reserve two DMA channels for audio in MPC8610 HPCD device tree powerpc: document the "fsl,ssi-dma-channel" compatible property powerpc: disable CHRP and PMAC support in various defconfigs OF: add fsl,mcu-mpc8349emitx to the exception list powerpc/83xx: add DS1374 RTC support for the MPC837xE-MDS boards powerpc: remove support for bootmem-allocated memory for the DIU driver powerpc: remove non-dependent load fsl_booke PTE_64BIT ...
| * \ \ \ Merge commit 'origin'Benjamin Herrenschmidt2008-10-153-20/+82
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Manual fixup of conflicts on: arch/powerpc/include/asm/dcr-regs.h drivers/net/ibm_newemac/core.h
| * \ \ \ \ Merge commit 'kumar/kumar-next'Benjamin Herrenschmidt2008-10-143-0/+221
| |\ \ \ \ \
| | * | | | | i2c: MPC8349E-mITX Power Management and GPIO expander driverAnton Vorontsov2008-10-133-0/+221
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On MPC8349E-mITX, MPC8315E-RDB and MPC837x-RDB boards there is a Freescale MC9S08QG8 (MCU) chip with the custom firmware pre-programmed. The chip is used to power-off the board by the software, and to control some GPIO pins. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | | | | i2c-mpc: suppress I2C device probingWolfgang Grandegger2008-10-081-1/+0
| |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch suppresses I2C device probing by clearing the class field of the "struct i2c_adapter" for the MPC I2C bus adapters. Some board configurations which rely on probing must be fixed up by adding a proper I2C device node to the DTS file, like the TQM85xx modules. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * | | | | powerpc: convert CONFIG_PPC_MERGE to CONFIG_PPC for legacy io checksKumar Gala2008-09-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that arch/ppc is dead CONFIG_PPC_MERGE is always defined for all powerpc platforms and we want to get rid of CONFIG_PPC_MERGE use CONFIG_PPC instead. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | | | | i2c-viapro: Add support for SMBus Process Call transactionsPrakash Mortha2008-10-141-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for SMBus Process Call transactions. These are combined word write, word read transactions. Signed-off-by: Prakash Mortha <pmortha@escient.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | | | | | i2c: Restore i2c_smbus_process_call functionPrakash Mortha2008-10-141-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Restore the i2c_smbus_process_call() as one driver (for the Micronas MAP5401) will need it soon. [JD: Update documentation accordingly.] Signed-off-by: Prakash Mortha <pmortha@escient.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | | | | | i2c: Do earlier driver model initDavid Brownell2008-10-141-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move I2C driver model init earlier in the boot sequence. This avoids oopsing in statically linked systems when some subsystems register I2C drivers in subsys_initcall() code, but those subsystems are linked (and initialized) before I2C. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | | | | | i2c: Only build Tyan SMBus mux drivers on x86Jean Delvare2008-10-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The two Tyan SMBus mux drivers (i2c-amd756-s4882 and i2c-nforce2-s4985) are only useful on specific x86 motherboards, so there is no point in letting them be built on other architectures. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | | | | | i2c: Guard against oopses from bad init sequencesDavid Brownell2008-10-141-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Guard I2C against oopsing because of init sequence problems, by verifying that i2c_init() has been called before calling any routines that rely on that initialization. This specific test just requires that bus_register(&i2c_bus_type) was called. Examples of this kind of oopsing come from subystems and drivers which register I2C drivers in their subsys_initcall code but which are statically linked before I2C by drivers/Makefile. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | | | | | i2c-parport-light: Don't register a platform device resourceJean Delvare2008-10-141-31/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The i2c-parport-light driver isn't a real platform driver, so it should not instantiate platform devices with resources. The resource management system can't cope with colliding resources, and we are likely to create such a colliding resource. So, better just try to grab the I/O ports we need right at module initialization time, and bail out if we can't. It has the added benefit that the module will no longer load if it isn't going to work, which is definitely more user-friendly. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | | | | | i2c/tps65010: Vibrator hookup to gpiolibMarek Vasut2008-10-141-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All the tps6501{0,1,2,3,4} chips have a signal for hooking up with a vibrator (for non-auditory cell phone "ring") ... expose that as one more (output-only) GPIO. [ dbrownell@users.sourceforge.net: comments; list tps65014 too ] Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | | | | | i2c-viapro: Add VX800/VX820 supportRudolf Marek2008-10-142-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Thanks to new datasheets published on http://linux.via.com.tw we can now add support for VX800/VX820 chipsets. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | | | | | i2c: Renesas Highlander FPGA SMBus supportPaul Mundt2008-10-143-0/+511
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the SMBus adapter found in the various FPGAs on the Renesas Highlander platforms. Particularly the R0P7780LC0011RL and R0P7785LC0011RL FPGAs. Functionality is fairly restricted, in that only byte and block data transfers are supported. Normal/fast mode and IRQ/polling are also supported. Primarily used for various RTCs and thermal sensors. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | | | | | i2c-pca-isa: Don't grab arbitrary resourcesRene Herman2008-10-141-3/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Grabbing ISA bus resources without anything or anyone telling us we should can break boot on randconfig/allyesconfig builds by keeping resources that are in fact owned by different hardware busy and does as reported by Ingo Molnar. Generally it's also dangerous to just poke at random I/O ports and especially those in the range where other old easily confused ISA hardware might live. For this specialized I2C bus driver, insist that the user specifies the resources before grabbing them. The^WA user of this driver is a one time echo "options i2c-pca-isa base=0x330 irq=10" >> /etc/modprobe.conf away from the old behaviour. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | | | | | i2c/isp1301_omap: Convert to a new-style i2c driver, part 2Jean Delvare2008-10-141-65/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on David Brownell's patch for tps65010 and previous work by Felipe Balbi, this patch finishes converting isp1301_omap to a new-style i2c driver. There's definitely room for further drivers cleanups, but these are out of the scope of this patch. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Tony Lindgren <tony@atomide.com>
* | | | | | i2c/isp1301_omap: Convert to a new-style i2c driver, part 1Felipe Balbi2008-10-141-29/+30
| |/ / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on David Brownell's patch for tps65010, this patch starts converting isp1301_omap.c to new-style i2c driver. Signed-off-by: Felipe Balbi <me@felipebalbi.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Tony Lindgren <tony@atomide.com>
* | | | | Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2008-10-111-17/+77
|\ \ \ \ \ | | |/ / / | |/| | / | |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits) [ARM] 5300/1: fixup spitz reset during boot [ARM] 5295/1: make ZONE_DMA optional [ARM] 5239/1: Palm Zire 72 power management support [ARM] 5298/1: Drop desc_handle_irq() [ARM] 5297/1: [KS8695] Fix two compile-time warnings [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores. [ARM] pxa: allow multi-machine PCMCIA builds [ARM] pxa: add preliminary CPUFREQ support for PXA3xx [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c [ARM] pxa/zylonite: add support for USB OHCI [ARM] ohci-pxa27x: use ioremap() and offset for register access [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph() [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c [ARM] pxa: simplify DMA register definitions [ARM] pxa: make additional DCSR bits valid for PXA3xx [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c ... Fixed up conflicts in arch/arm/mach-versatile/core.c sound/soc/pxa/pxa2xx-ac97.c sound/soc/pxa/pxa2xx-i2s.c manually.
| * | | [ARM] pxa: move i2c register and bit definitions into i2c-pxa.cEric Miao2008-10-071-1/+38
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | Merge branches 'pxa-core' and 'pxa-machines' into pxa-allRussell King2008-10-072-71/+218
| |\ \ \ | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/mach-pxa/Kconfig arch/arm/mach-pxa/pxa25x.c arch/arm/mach-pxa/pxa27x.c
| * | | [ARM] 5278/1: i2c-pxa fast mode supportJonathan Cameron2008-10-031-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add fast_mode option to i2c_pxa_platform_data and use it to set the ICR_FM bit appropriately when i2c_pxa_reset is called. Parameter called fast_mode rather than frequency as this driver is also used for the i2c_pxa_pwr bus which has different normal and fast frequencies. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | [I2C] pxa: provide late suspend and early resume hooksRussell King2008-09-091-6/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Properly hook the I2C driver into the PM code; the previous fix for this (ece5f7b3c4fde70a1ae4add7372ebca5c90bc34d) worked around the platform where I2C is required to be available early during resume. It has been found to be sufficient to use the early resume hook for this function, so the original hack can die. Leave the hack in place for the PIO transfer handler though. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | [ARM] 5203/1: i2c-pxa: fix scheduling while atomic in i2c_pxa_abort()Dmitry Baryshkov2008-09-091-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c_pxa_abort can be called from the atomic context. Change it to use mdelay and counted loop. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | [ARM] 5201/1: PXA3xx: Add support for power i2c busMike Rapoport2008-09-091-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add power I2C support for PXA3xx processors Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | i2c-dev: Return correct error code on class_create() failureSven Wegener2008-09-241-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to convert the error pointer from class_create(), else we'll return the successful return code from register_chrdev() on failure. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
OpenPOWER on IntegriCloud