summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
Commit message (Collapse)AuthorAgeFilesLines
* i2c: Split I2C_M_NOSTART support out of I2C_FUNC_PROTOCOL_MANGLINGMark Brown2012-05-303-3/+5
| | | | | | | | | | | | | | | | | | Since there are uses for I2C_M_NOSTART which are much more sensible and standard than most of the protocol mangling functionality (the main one being gather writes to devices where something like a register address needs to be inserted before a block of data) create a new I2C_FUNC_NOSTART for this feature and update all the users to use it. Also strengthen the disrecommendation of the protocol mangling while we're at it. In the case of regmap-i2c we remove the requirement for mangling as I2C_M_NOSTART is the only mangling feature which is being used. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c-dev: Add support for I2C_M_RECV_LENJean Delvare2012-05-301-4/+26
| | | | | | | | | | | | | | As the bus driver side implementation of I2C_M_RECV_LEN is heavily tied to SMBus, we can't support received length over 32 bytes, but let's at least support that. In practice, the caller will have to setup a buffer large enough to cover the case where received length byte has value 32, so minimum 32 + 1 = 33 bytes, possibly more if there is a fixed number of bytes added for the specific slave (for example a checksum.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Douglas Gilbert <dgilbert@interlog.com>
* Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linuxLinus Torvalds2012-05-2627-477/+356
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull i2c-embedded changes from Wolfram Sang: "Major changes: - lots of devicetree additions for existing drivers. I tried hard to make sure the bindings are proper. In more complicated cases, I requested acks from people having more experience with them than me. That took a bit of extra time and also some time went into discussions with developers about what bindings are and what not. I have the feeling that the workflow with bindings should be improved to scale better. I will spend some more thought on this... - i2c-muxes are succesfully used meanwhile, so we dropped EXPERIMENTAL for them and renamed the drivers to a standard pattern to match the rest of the subsystem. They can also be used with devicetree now. - ixp2000 was removed since the whole platform goes away. - cleanups (strlcpy instead of strcpy, NULL instead of 0) - The rest is typical driver fixes I assume. All patches have been in linux-next at least since v3.4-rc6." Fixed up trivial conflict in arch/arm/mach-lpc32xx/common.c due to the same patch already having come in through the arm/soc trees, with additional patches on top of it. * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (35 commits) i2c: davinci: Free requested IRQ in remove i2c: ocores: register OF i2c devices i2c: tegra: notify transfer-complete after clearing status. I2C: xiic: Add OF binding support i2c: Rename last mux driver to standard pattern i2c: tegra: fix 10bit address configuration i2c: muxes: rename first set of drivers to a standard pattern of/i2c: implement of_find_i2c_adapter_by_node i2c: implement i2c_verify_adapter i2c-s3c2410: Add HDMIPHY quirk for S3C2440 i2c-s3c2410: Rework device type handling i2c: muxes are not EXPERIMENTAL anymore i2c/of: Automatically populate i2c mux busses from device tree data. i2c: Add a struct device * parameter to i2c_add_mux_adapter() of/i2c: call i2c_verify_client from of_find_i2c_device_by_node i2c: designware: Add clk_{un}prepare() support i2c: designware: add PM support i2c: ixp2000: remove driver i2c: pnx: add device tree support i2c: imx: don't use strcpy but strlcpy ...
| * i2c: davinci: Free requested IRQ in removeMarcus Folkesson2012-05-121-1/+1
| | | | | | | | | | | | | | | | | | The freed IRQ is not necessary the one requested in probe. Even if it was, with two or more i2c-controllers it will fails anyway. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: stable@kernel.org
| * i2c: ocores: register OF i2c devicesGanesan Ramalingam2012-05-121-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | Call of_i2c_register_devices() in probe function to register i2c devices specified in the device tree or OF. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> [wsa: add proper braces] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: tegra: notify transfer-complete after clearing status.Laxman Dewangan2012-05-121-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | The notification of the transfer complete by calling complete() should be done after clearing all interrupt status. This avoids the race condition of misconfigure the i2c controller in multi-core environment. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: stable@kernel.org
| * I2C: xiic: Add OF binding supportLars-Peter Clausen2012-05-121-5/+18
| | | | | | | | | | Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: Rename last mux driver to standard patternJean Delvare2012-05-123-24/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | Update the MAINTAINERS entry and all other references accordingly. Based on an original patch by Wolfram Sang. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> [wsa: fixed merge conflict due to rework in i2c_add_mux_adapter()] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: tegra: fix 10bit address configurationLaxman Dewangan2012-05-121-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | The slave address of device to be configured in packet header as follows: 7 bit address: PacketHeader3[7:1] 10 bit address: PacketHeader3[9:0] Fixing the code to make packet header3 properly. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: muxes: rename first set of drivers to a standard patternWolfram Sang2012-05-124-4/+4
| | | | | | | | | | | | | | | | | | | | | | Apply a naming pattern like in the rest of the subsystem to a first set of mux drivers. Those drivers are the low-hanging fruit; we want to pick them to motivate upcoming drivers to follow the new pattern. The missing GPIO driver will be converted in a later patch. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> (pca9541) Acked-by: Jean Delvare <khali@linux-fr.org>
| * i2c: implement i2c_verify_adapterStephen Warren2012-05-121-0/+17
| | | | | | | | | | | | | | | | | | This converts a struct device * to a struct i2c_adapter * while verifying that the device really is an I2C adapter. Just like i2c_verify_client. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c-s3c2410: Add HDMIPHY quirk for S3C2440Karol Lewandowski2012-05-121-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for s3c2440 I2C bus controller dedicated HDMIPHY device on Exynos4 platform. Some quirks are introduced due to differences between HDMIPHY and other I2C controllers on Exynos4. These differences are: - no GPIOs, HDMIPHY is inside the SoC and the controller is connected internally - due to unknown reason (probably HW bug in HDMIPHY and/or the controller) a transfer fails to finish. The controller hangs after sending the last byte, the workaround for this bug is resetting the controller after each transfer Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Tested-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c-s3c2410: Rework device type handlingKarol Lewandowski2012-05-121-41/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Reorganize driver a bit to better handle device tree-based systems: - move machine type to driver's private structure instead of quering platform device variants in runtime - replace s3c24xx_i2c_type enum with unsigned int that holds bitmask with revision-specific quirks Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: muxes are not EXPERIMENTAL anymoreWolfram Sang2012-05-121-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We got multiple patches to add mux support to device tree, so people are using it happily already and build up on it. I also used it in a project without encountering problems. 20 months of EXPERIMENTAL should do for this. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Michael Lawnick <ml.lawnick@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: David Daney <ddaney.cavm@gmail.com>
| * i2c/of: Automatically populate i2c mux busses from device tree data.David Daney2012-05-121-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For 'normal' i2c bus drivers, we can call of_i2c_register_devices() and have the device tree framework automatically populate the bus with the devices specified in the device tree. This patch adds a common code to the i2c mux framework to have the mux sub-busses be populated by the of_i2c_register_devices() too. If the mux device has an of_node, we populate the sub-bus' of_node so that the subsequent call to of_i2c_register_devices() will find the corresponding devices. It seemed better to put this logic in i2c_add_mux_adapter() rather than the individual mux drivers, as they will all probably want to do the same thing. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Lars-Peter Clausen <lars@metafoo.de> [wsa: removed superfluous ret-variable and fixed a typo in a comment] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: Add a struct device * parameter to i2c_add_mux_adapter()David Daney2012-05-124-12/+15
| | | | | | | | | | | | | | | | | | | | | | And adjust all callers. The new device parameter is used in the next patch to initialize the mux's of_node so that its children may be automatically populated. Signed-off-by: David Daney <david.daney@cavium.com> Tested-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: designware: Add clk_{un}prepare() supportViresh Kumar2012-05-121-5/+5
| | | | | | | | | | | | | | | | | | clk_{un}prepare is mandatory for platforms using common clock framework. Since this driver is used by SPEAr platform, which supports common clock framework, add clk_{un}prepare() support for designware i2c. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: designware: add PM supportDeepak Sikri2012-05-121-0/+27
| | | | | | | | | | | | | | | | This patch adds in support for standby/S2R/hybernate for i2c-designware driver. Signed-off-by: Deepak Sikri <deepak.sikri@st.com> Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: ixp2000: remove driverRob Herring2012-05-123-172/+0
| | | | | | | | | | | | | | The platform is removed, so there are no users of this driver. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: pnx: add device tree supportRoland Stigge2012-05-121-16/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds device tree support to the pnx-i2c driver by using platform resources for memory region and irq and removing dependency on mach includes. The following platforms are affected: * PNX * LPC31xx (WIP) * LPC32xx The patch is based on a patch by Jon Smirl, working on lpc31xx integration Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: imx: don't use strcpy but strlcpyWolfram Sang2012-05-121-1/+1
| | | | | | | | Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
| * i2c: eg20t: don't use strcpy but strlcpyWolfram Sang2012-05-121-1/+1
| | | | | | | | | | Signed-off-by: Wolfram Sang <wolfram@the-dreams.de> Cc: Tomoya MORINAGA <tomoya.rohm@gmail.com>
| * i2c: eg20t: remove unused functionWolfram Sang2012-05-121-5/+0
| | | | | | | | | | | | | | | | cppcheck rightfully says: drivers/i2c/busses/i2c-eg20t.c:266: style: The function 'ktime_lt' is never used Signed-off-by: Wolfram Sang <wolfram@the-dreams.de> Cc: Tomoya MORINAGA <tomoya.rohm@gmail.com>
| * i2c: eg20t: pass on return value in i2c_xferWolfram Sang2012-05-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | smatch says: drivers/i2c/busses/i2c-eg20t.c:702 pch_i2c_xfer() info: why not propagate 'ret' from mutex_lock_interruptible() instead of -512? which is especially true since for -ENORESTARTSYS it is said in linux/errno.h "signal_pending() MUST be set" which is not done here. So just pass on the return value we got. Signed-off-by: Wolfram Sang <wolfram@the-dreams.de> Cc: Tomoya MORINAGA <tomoya.rohm@gmail.com>
| * i2c: eg20t: use NULL instead of 0Wolfram Sang2012-05-121-1/+1
| | | | | | | | | | | | | | | | sparse rightfully says: drivers/i2c/busses/i2c-eg20t.c:990:59: warning: Using plain integer as NULL pointer Signed-off-by: Wolfram Sang <wolfram@the-dreams.de> Cc: Tomoya MORINAGA <tomoya.rohm@gmail.com>
| * i2c-eg20t: Merge two functionsTomoya MORINAGA2012-05-121-43/+22
| | | | | | | | | | | | | | | | By previous patch, pch_i2c_wait_for_xfer_complete can be merged to pch_i2c_wait_for_check_xfer. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c-eg20t: add helper function for xfer checkTomoya MORINAGA2012-05-121-160/+66
| | | | | | | | | | | | | | | | | | Currently, there are the same code for xfer complete check processing. So, I add helper function pch_i2c_wait_for_check_xfer. Reported-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c-eg20t: Call init() when wait-event timeout occursTomoya MORINAGA2012-05-121-0/+24
| | | | | | | | | | Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c-mpc: avoid I2C abnormal after resuming from deep sleepZhao Chenhui2012-05-121-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | When entering deep sleep, the value in the registers I2CFDR and I2CDFSRR are lost. This causes I2C access to fail after resuming. Add suspend/resume routines to save/restore the registers I2CFDR and I2CDFSRR. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: sh_mobile: add device tree supportMagnus Damm2012-05-121-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables DT support for the IIC driver used on SH-based SoCs such as sh7722 and sh7724 among others as well as SH-Mobile SoCs such as sh7367, sh7377, sh7372, sh73a0 and r8a7740. Tested with out-of-tree DT support code on the sh7372 Mackerel board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c-pnx.c: Remove duplicated i2c.hRoland Stigge2012-05-121-3/+46
| | | | | | | | | | | | | | | | | | | | The platforms using i2c-pnx.c both defined a duplicated i2c.h (used nowhere else). This patch removes those and integrates the contents into the driver itself. Signed-off-by: Roland Stigge <stigge@antcom.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c-pnx.c: Use resources in platformsRoland Stigge2012-05-121-22/+25
| | | | | | | | | | | | | | | | | | As a precondition for device tree conversion, the platforms using i2c-pnx.c are converted to using mem and irq resources instead of platform data. Signed-off-by: Roland Stigge <stigge@antcom.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: designware: Add support for 16bit register accessStefan Roese2012-05-122-11/+25
| | | | | | | | | | | | | | | | | | The STM SPEAr platform can only access the i2c controller register via 16bit read/write functions. This patch adds support to automatically detect this 16bit access mode. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c: Dynamically assign adapter id if it wasn't explictly specifiedKarol Lewandowski2012-05-123-14/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 488bf314b ("i2c: Allow i2c_add_numbered_adapter() to assign a bus id") reworked i2c_add_numbered_adapter() to call i2c_add_adapter() if requested bus was -1. This allows to simplify driver's initialization procedure by using just one function for static and dynamic adapter id registration. This patch updates few more drivers (missed out in original patch) to use this functionality. Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c-pxa: Drop leftover commentKarol Lewandowski2012-05-121-5/+0
| | | | | | | | | | | | | | | | | | | | | | Commit 488bf314b ("i2c: Allow i2c_add_numbered_adapter() to assign a bus id") reworked i2c-pxa driver leaving obsolete comment. This commit simply drops it. Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
| * i2c-s3c2410: Drop unused defineKarol Lewandowski2012-05-121-3/+1
| | | | | | | | | | | | | | | | | | | | Use standard of_match_ptr() to avoid defining variable unused in non device tree builds. Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* | Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-05-261-0/+13
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull arm-soc device tree conversions (part 2) from Olof Johansson: "These continue the device tree work from part 1, this set is for the tegra, mxs and imx platforms, all of which have dependencies on clock or pinctrl changes submitted earlier." Fix up trivial conflicts due to nearby changes in drivers/{gpio/gpio,i2c/busses/i2c}-mxs.c * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: dt: tegra: invert status=disable vs status=okay ARM: dt: tegra: consistent basic property ordering ARM: dt: tegra: sort nodes based on bus order ARM: dt: tegra: remove duplicate device_type property ARM: dt: tegra: consistenly use lower-case for hex constants ARM: dt: tegra: format regs properties consistently ARM: dt: tegra: gpio comment cleanup ARM: dt: tegra: remove unnecessary unit addresses ARM: dt: tegra: whitespace cleanup ARM: dt: tegra cardhu: fix typo in SDHCI node name ARM: dt: tegra: cardhu: register core regulator tps62361 ARM: dt: tegra30.dtsi: Add SMMU node ARM: dt: tegra20.dtsi: Add GART node ARM: dt: tegra30.dtsi: Add Memory Controller(MC) nodes ARM: dt: tegra20.dtsi: Add Memory Controller(MC) nodes ARM: dt: tegra: Add device tree support for AHB ARM: dts: enable audio support for imx28-evk ARM: dts: enable i2c device for imx28-evk i2c: mxs: add device tree probe support ARM: dts: enable mmc for imx28-evk ...
| * | i2c: mxs: add device tree probe supportShawn Guo2012-05-131-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | Add device tree probe support for i2c-mxs driver. So far, it's only been tested on imx28. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de>
| * | Merge branches 'clk/mxs' and 'imx/pinctrl/for-3.5' into mxs/dt/for-3.5Shawn Guo2012-05-122-0/+14
| |\ \ | | |/ | |/|
* | | Merge tag 'stmp-dev' of ↵Linus Torvalds2012-05-262-7/+3
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc stmp-dev library code from Olof Johansson: "A number of devices are using a common register layout, this adds support code for it in lib/stmp_device.c so we do not need to duplicate it in each driver." Fix up trivial conflicts in drivers/i2c/busses/i2c-mxs.c and lib/Makefile * tag 'stmp-dev' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: i2c: mxs: use global reset function lib: add support for stmp-style devices
| * | | i2c: mxs: use global reset functionWolfram Sang2012-04-202-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The former mach specific reset_block function has been converted to a global one. Use the new one to remove mach dependency from the driver. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* | | | Merge branch 'next' of ↵Linus Torvalds2012-05-231-27/+71
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Benjamin Herrenschmidt: "Here are the powerpc goodies for 3.5. Main highlights are: - Support for the NX crypto engine in Power7+ - A bunch of Anton goodness, including some micro optimization of our syscall entry on Power7 - I converted a pile of our thermal control drivers to the new i2c APIs (essentially turning the old therm_pm72 into a proper set of windfarm drivers). That's one more step toward removing the deprecated i2c APIs, there's still a few drivers to fix, but we are getting close - kexec/kdump support for 47x embedded cores The big missing thing here is no updates from Freescale. Not sure what's up here, but with Kumar not working for them anymore things are a bit in a state of flux in that area." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (71 commits) powerpc: Fix irq distribution Revert "powerpc/hw-breakpoint: Use generic hw-breakpoint interfaces for new PPC ptrace flags" powerpc: Fixing a cputhread code documentation powerpc/crypto: Enable the PFO-based encryption device powerpc/crypto: Build files for the nx device driver powerpc/crypto: debugfs routines and docs for the nx device driver powerpc/crypto: SHA512 hash routines for nx encryption powerpc/crypto: SHA256 hash routines for nx encryption powerpc/crypto: AES-XCBC mode routines for nx encryption powerpc/crypto: AES-GCM mode routines for nx encryption powerpc/crypto: AES-ECB mode routines for nx encryption powerpc/crypto: AES-CTR mode routines for nx encryption powerpc/crypto: AES-CCM mode routines for nx encryption powerpc/crypto: AES-CBC mode routines for nx encryption powerpc/crypto: nx driver code supporting nx encryption powerpc/pseries: Enable the PFO-based RNG accelerator powerpc/pseries/hwrng: PFO-based hwrng driver powerpc/pseries: Add PFO support to the VIO bus powerpc/pseries: Add pseries update notifier for OFDT prop changes powerpc/pseries: Add new hvcall constants to support PFO ...
| * \ \ \ Merge branch 'merge' into nextBenjamin Herrenschmidt2012-05-144-8/+15
| |\ \ \ \ | | | |/ / | | |/| | | | | | | We want the irq fixes from the "merge" branch.
| * | | | i2c/powermac: Register i2c devices from device-treeBenjamin Herrenschmidt2012-04-301-27/+71
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This causes i2c-powermac to register i2c devices exposed in the device-tree, enabling new-style probing of devices. Note that we prefix the IDs with "MAC," in order to prevent the generic drivers from matching. This is done on purpose as we only want drivers specifically tested/designed to operate on powermacs to match. This removes the special case we had for the AMS driver, and updates the driver's match table instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | | | Merge branch 'for-linus' of ↵Linus Torvalds2012-05-223-3/+3
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "As usual, it's mostly typo fixes, redundant code elimination and some documentation updates." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits) edac, mips: don't change code that has been removed in edac/mips tree xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer lib: Change mail address of Oskar Schirmer net: Change mail address of Oskar Schirmer arm/m68k: Change mail address of Sebastian Hess i2c: Change mail address of Oskar Schirmer net: Fix tcp_build_and_update_options comment in struct tcp_sock atomic64_32.h: fix parameter naming mismatch Kconfig: replace "--- help ---" with "---help---" c2port: fix bogus Kconfig "default no" edac: Fix spelling errors. qla1280: Remove redundant NULL check before release_firmware() call remoteproc: remove redundant NULL check before release_firmware() qla2xxx: Remove redundant NULL check before release_firmware() call. aic94xx: Get rid of redundant NULL check before release_firmware() call tehuti: delete redundant NULL check before release_firmware() qlogic: get rid of a redundant test for NULL before call to release_firmware() bna: remove redundant NULL test before release_firmware() tg3: remove redundant NULL test before release_firmware() call typhoon: get rid of redundant conditional before all to release_firmware() ...
| * | | | i2c: Change mail address of Oskar SchirmerOskar Schirmer2012-05-172-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | That old mail address doesnt exist any more. This changes all occurences to my new address. Signed-off-by: Oskar Schirmer <oskar@scara.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | | | Fix typo in various Kconfig fileMasanari Iida2012-04-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct spelling typo in various Kconfig file. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | | | Merge tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-05-222-0/+14
|\ \ \ \ \ | | |_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull arm soc-specific pinctrl changes from Olof Johansson: "With this, five platforms are moving to the relatively new pinctrl subsystem for their pin management, replacing the older soc specific in-kernel interfaces with common code. There is quite a bit of net addition of code for each platform being added to the pinctrl subsystem. But the payback comes later when adding new boards can be done by only providing new device trees instead." Fix up trivial conflicts in arch/arm/mach-ux500/{Makefile,board-mop500.c} * tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits) mtd: nand: gpmi: fix compile error caused by pinctrl call ARM: PRIMA2: select PINCTRL and PINCTRL_SIRF in Kconfig ARM: nomadik: enable PINCTRL_NOMADIK where needed ARM: mxs: enable pinctrl support video: mxsfb: adopt pinctrl support ASoC: mxs-saif: adopt pinctrl support i2c: mxs: adopt pinctrl support mtd: nand: gpmi: adopt pinctrl support mmc: mxs-mmc: adopt pinctrl support serial: mxs-auart: adopt pinctrl support serial: amba-pl011: adopt pinctrl support spi/imx: adopt pinctrl support i2c: imx: adopt pinctrl support can: flexcan: adopt pinctrl support net: fec: adopt pinctrl support ARM: ux500: switch MSP to using pinctrl for pins ARM: ux500: alter MSP registration to return a device pointer ARM: ux500: switch to using pinctrl for uart0 ARM: ux500: delete custom pin control system ARM: ux500: switch over to Nomadik pinctrl driver ...
| * | | | i2c: mxs: adopt pinctrl supportShawn Guo2012-05-121-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cc: linux-i2c@vger.kernel.org Cc: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | | | i2c: imx: adopt pinctrl supportShawn Guo2012-05-121-0/+8
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | Cc: linux-i2c@vger.kernel.org Cc: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
OpenPOWER on IntegriCloud