| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit 407a2c2a4d85100c8c67953e4bac2f4a6c942335.
Explanation provided by Benjamin Tissoires:
Commit "HID: hid-logitech-dj, querying_devices was never set" activate
a flag which guarantees that we do not ask the receiver for too many
enumeration. When the flag is set, each following enumeration call is
discarded (the usb request is not forwarded to the receiver). The flag
is then released when the driver receive a pairing information event,
which normally follows the enumeration request.
However, the USB3 bug makes the driver think the enumeration request
has been forwarded to the receiver. However, it is actually not the
case because the USB stack returns -EPIPE. So, when a new unknown
device appears, the workaround consisting in asking for a new
enumeration is not working anymore: this new enumeration is discarded
because of the flag, which is never reset.
A solution could be to trigger a timeout before releasing it, but for
now, let's just revert the patch.
Reported-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Tested-by: Sune Mølgaard <sune@molgaard.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
- fix hid-sony PS3 sixaxxis breakage from Benjamin Tissories
- fix hidraw race condition from Yonghua Zheng
- fix/bandaid for rare device enumeration problems of Logitech Unifying
receivers from Nestor Lopez Casado
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: hidraw: fix improper mutex release
HID: sony: fix HID mapping for PS3 sixaxis controller
HID: hid-logitech-dj: querying_devices was never set
HID: Revert "Revert "HID: Fix logitech-dj: missing Unifying device issue""
|
| | |\
| | |
| | |
| | | |
'for-3.11/logitech-enumeration-fix' into for-linus
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Set querying_devices flag to true when we start the enumeration
process.
This was missing from the original patch. It never produced
undesirable effects as it is highly improbable to have a second
enumeration triggered while a first one was still in progress.
Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This reverts commit 8af6c08830b1ae114d1a8b548b1f8b056e068887.
This patch re-adds the workaround introduced by 596264082f10dd4
which was reverted by 8af6c08830b1ae114.
The original patch 596264 was needed to overcome a situation where
the hid-core would drop incoming reports while probe() was being
executed.
This issue was solved by c849a6143bec520af which added
hid_device_io_start() and hid_device_io_stop() that enable a specific
hid driver to opt-in for input reports while its probe() is being
executed.
Commit a9dd22b730857347 modified hid-logitech-dj so as to use the
functionality added to hid-core. Having done that, workaround 596264
was no longer necessary and was reverted by 8af6c08.
We now encounter a different problem that ends up 'again' thwarting
the Unifying receiver enumeration. The problem is time and usb controller
dependent. Ocasionally the reports sent to the usb receiver to start
the paired devices enumeration fail with -EPIPE and the receiver never
gets to enumerate the paired devices.
With dcd9006b1b053c7b1c the problem was "hidden" as the call to the usb
driver became asynchronous and none was catching the error from the
failing URB.
As the root cause for this failing SET_REPORT is not understood yet,
-possibly a race on the usb controller drivers or a problem with the
Unifying receiver- reintroducing this workaround solves the problem.
Overall what this workaround does is: If an input report from an
unknown device is received, then a (re)enumeration is performed.
related bug:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1194649
Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Mutex can not be released unless all hid_device members are properly
initialized. Otherwise it would result in a race condition that can
cause NULL pointer kernel panic issue in hidraw_open where it uses
uninitialized 'list' member in list_add_tail().
Signed-off-by: Yonghua Zheng <younghua.zheng@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | |/
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Commit f04d51404f51 (HID: driver for PS2/3 Buzz controllers) introduced
an input_mapping() callback, but set the return value to -1 to all devices
except the Buzz controllers. The result of this is that the Sixaxis input
device is not populated, making it useless.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| |\ \
| |/
|/|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"First round of updates for the input subsystem.
You will get a new touchsreen driver for Cypress 4th generation
devices, a driver for a special controller implementing PS/2 protocol
in OLPC devices, and a driver for power key for SiRFprimaII PWRC.
HID and bcm5497 now support for the 2013 MacBook Air.
EVIOCGKEY and the rest of evdev ioctls now flush events of matching
type from the client's event queue so that clients can be sure any
events received after issuing EVIOCG* ioctl are new events.
And a host of cleanups and improvements in other drivers"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (87 commits)
Input: cyttsp4 - kfree xfer_buf on error path in probe()
Input: tps6507x-ts - select INPUT_POLLDEV
Input: bcm5974 - add support for the 2013 MacBook Air
HID: apple: Add support for the 2013 Macbook Air
Input: cyttsp4 - leak on error path in probe()
Input: cyttsp4 - silence NULL dereference warning
Input: cyttsp4 - silence shift wrap warning
Input: tps6507x-ts - convert to polled input device infrastructure
ARM: davinci: da850-evm: remove vref from touchscreen platform data
Input: cyttsp4 - SPI driver for Cypress TMA4XX touchscreen devices
Input: cyttsp4 - I2C driver for Cypress TMA4XX touchscreen devices
Input: cyttsp4 - add core driver for Cypress TMA4XX touchscreen devices
Input: cyttsp - I2C driver split into two modules
Input: add OLPC AP-SP driver
Input: nspire-keypad - remove redundant dev_err call in nspire_keypad_probe()
Input: tps6507x-ts - remove vref from platform data
Input: tps6507x-ts - use bool for booleans
Input: tps6507x-ts - remove bogus unreachable code
Input: samsung-keypad - let device core setup the default pin configuration
Input: wacom_i2c - implement hovering capability
...
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This patch adds keyboard support for MacbookAir6,2 as WELLSPRING8
(0x0291, 0x0292, 0x0293). The touchpad is handled in a separate
bcm5974 patch, as usual.
Cc: stable@vger.kernel.org
Reported-and-tested-by: Brad Ford <plymouthffl@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
| | | | |
| | \ | |
| |\ \ \ |
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The Wii U Pro Controller is a new Nintendo remote device that looks very
similar to the XBox controller. It has nearly the same features and uses
the same protocol as the Wii Remote.
We add a new wiimote extension device so the Pro Controller is properly
detected and supported.
The device reports MP support, which is odd and I couldn't get it working,
yet. Hence, we disable MP registers for now. Further investigation is
needed to see what extra capabilities are provided.
There are some other unknown bits in the extension reports that I couldn't
figure out what they do. You can use hidraw to access these if you're
interested.
We might want to hook up the "charging" and "USB" bits to the battery
device so user-space can query whether it is currently charged via USB.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
drivers/hid/hid-wiimote-modules.c:569:2-3: Unneeded semicolon
Generated by: coccinelle/misc/semicolon.cocci
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
If an extension device isn't initialized properly, or during hardware
initialization, a device might send extension data which is all 0xff.
This is ambigious because this is also a valid normal data report. But
it is impossible, under normal conditions, to trigger valid reports with
all 0xff. Hence, we can safely ignore them.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
I finally got a "Classic Controller" and "Classic Controller Pro" in my
hands and noticed that all analog data was incorrectly parsed. Fix this
up so we report the data that we pretend we do.
I really doubt that this breaks any backwards compatibility, but if we
get any reports, we only need to revert this single patch.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
We normally get EXT hotplug events or poll for MP hotplugging so we
don't need to force extension port initialization during device setup.
But for gen20 devices, we disable MP polling because MP is always
present. However, this prevents MP initialization during device setup
and users need to plug another extension to trigger EXT/MP detection.
Therefore, we now trigger EXT/MP detection during device setup
automatically. This also avoids slightly delayed extension detection
and provides sysfs child-devices prior to the "changed"-uevent during
device setup.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
We need to correctly zero-terminate the input to parse it. Otherwise, we
always end up interpreting it as numbers.
Furthermore, we actually want hexadecimal numbers instead of decimal. As
it is a debugfs interface, we can change the API at any time.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Devices which have built-in motion plus ports don't need MP detection
logic. The new WIIMOD_BUILTIN_MP modules sets the WIIPROTO_FLAG_BUILTIN_MP
flag which disables polling for MP.
Some other devices erroneously report that they support motion-plus. For
these devices and all devices without extension ports, we load
WIIMOD_NO_MP which sets WIIPROTO_FLAG_NO_MP. This effectively disables all
MP detection logic.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
We now have dynamic hotplug support so the old static extensions are no
longer needed nor used. Remove it along CONFIG_HID_WIIMOTE_EXT.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Balance-Boards provide 3 16bit calibration values for each of the 4
sensors. We provide these now as 192bit value via a new "bboard_calib"
sysfs attribute.
We also re-read the calibration data from the device whenever user-space
attempts to read this file. On normal Nintendo boards, this always
produces the same results, however, on some 3rd party devices these values
change until the device is fully initialized. As I have currently no idea
how long to wait until it's ready (sometimes takes up to 10s?) we provide
a simple workaround for users by reading this file.
If we, at some point, figure out how it works, we can implement it in the
kernel and provide offline data via "bboard_calib". This won't break
user-space then.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Two new attributes, "extension" and "devtype" now allow user-space to read
the extension type and device type. As device detection is asynchronous,
we send a CHANGED event after it is done. This also allows user-space to
wait for a device to settle before opening its input event devices.
The "extension" device is compatible with the old "extension" sysfs field
(which was registered by the static extension support code).
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
If we write a DRM mode via debugfs, we shouldn't allow normal operations
to overwrite this DRM mode. This is important if we want to debug
3rd-party devices and we want to see what data is sent on each mode.
If we write NULL/0 as DRM, the lock is removed again so the best matching
DRM is chosen by wiimote core.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
single_open() stores the seq_file pointer in file->private_data. It stores
our ctx pointer in seq_file->private.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Add parsers for motion plus data so we can hotplug motion plus extensions
and make use of them. This is mostly the same as the old static motion
plus parser.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Add a new extension module for the classic controller so we get hotplug
support for this device. It is mostly the same as the old static classic
controller parser.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This moves the nunchuk parser over to an extension module. This allows to
make use of hotplugged Nunchuks instead of the old static parser.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This adds Nintendo Wii Balance Board support to the new HOTPLUG capable
wiimote core. It is mostly copied from the old extension.
This also adds Balance Board device detection. Whenever we find a device
that supports the balance-board extension, we assume that it is a real
balance board and disable unsupported hardward like accelerometer, IR,
rumble and more.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The Wii Remote has several extension ports. The first port (EXT) provides
hotplug events whenever an extension is plugged. The second port (MP)
does not provide hotplug events by default. Instead, we have to map MP
into EXT to get events for it.
This patch introduces hotplug support for extensions. It is fairly
complicated to get this right because the Wii Remote sends a lot of
noise-hotplug events while activating extension ports. We need to filter
the events and only handle the events that are real hotplug events.
Mapping MP into EXT is easy. But if we want both, MP _and_ EXT at the same
time, we need to map MP into EXT and enable a passthrough-mode. This will
then send real EXT events through the mapped MP interleaved with real MP
events. But once MP is mapped, we no longer have access to the real EXT
registers so we need to perform setup _before_ mapping MP. Furthermore, we
no longer can read EXT IDs so we cannot verify if EXT is still the same
extension that we expect it to be.
We deal with this by unmapping MP whenever we got into a situation where
EXT might have changed. We then re-read EXT and MP and remap everything.
The real Wii Console takes a fairly easy approach: It simply reconnects to
the device on hotplug events that it didn't expect. So if a program wants
MP events, but MP is disconnected, it fails and reconnects so it can wait
for MP hotplug events again.
This simplifies hotplugging a lot because we just react on PLUG events and
ignore UNPLUG events.
The more sophisticated Wii applications avoid reconnection (well, they
still reconnect during many weird events, but at least not during UNPLUG)
but they start polling the device. This allows them to disable the device,
poll for the extension ports to settle and then initialize them again.
Unfortunately, this approach fails whenever an extension is replugged
while it is initialized. We would loose UNPLUG events and polling the
device later will give unreliable results because the extension port might
be in some weird state, even though it's actually unplugged.
Our approach is a real HOTPLUG approch. We keep track of the EXT and
mapped MP hotplug events whenever they occur. We then re-evaluate the
device state and initialize any possible new extension or deinitialize any
gone extension. Only during initialization, we set an extension port
ACTIVE. However, during an unplug event we mark them as INACTIVE. This
guarantess that a fast UNPLUG -> PLUG event sequence doesn't keep them
marked as PLUGGED+ACTIVE but only PLUGGED.
To deal with annoying noise-hotplug events during extension mapping, we
simply rescan the device before performing any mapping. This allows us to
ignore all the noise events as long as the device is in the correct state.
Long story short: EXT and MP registers are sparsely known and we need to
jump through hoops to get reliable HOTPLUG working. But while Nintendo
needs *FOUR* Bluetooth reconnections for the shortest imaginable
boot->menu->game->menu->shutdown sequence, we now need *ZERO*.
As always, 3rd party devices tend to break whenever we behave differently
than the original Wii. So there are also devices which _expect_ a
disconnect after UNPLUG. Obviously, these devices won't benefit from this
patch. But all official devices were tested extensively and work great
during any hotplug sequence. Yay!
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
IR is the last piece that still is handled natively. This patch converts
it into a sub-device module like all other sub-devices. It mainly moves
code and doesn't change semantics.
We also implicitly sync IR data on ir_to_input3 now so the explicit
input_sync() calls are no longer needed.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Accelerometer data is very similar to KEYS handling. Therefore, convert
all ACCEL related handling into a sub-device module similar to KEYS.
This doesn't change any semantics but only moves code over to
wiimote-modules.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Each of the 4 LEDs may be supported individually by devices. Therefore,
we need one module for each device. To avoid code-duplication, we simply
pass the LED ID as "arg" argument to the module loading code.
This just moves the code over to wiimote-module. The semantics stay the
same as before.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This introduces a new sub-device module for the BATTERY handlers. It
moves the whole power_supply battery handling over to wiimote-modules.
This doesn't change any semantics or ABI but only converts the battery
handling into a sub-device module.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This introduces the first sub-device modules by converting the KEYS and
RUMBLE sub-devices into wiimote modules. Both must be converted at once
because they depend on the built-in shared input device.
This mostly moves code from wiimote-core to wiimote-modules and doesn't
change any semantics or ABI.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
To avoid loading all sub-device drivers for every Wii Remote, even though
the required hardware might not be available, we introduce a module layer.
The module layer specifies which sub-devices are available on each
device-type. After device detection, we only load the modules for the
detected device. If module loading fails, we unload everything and mark
the device as WIIMOTE_DEV_UNKNOWN. As long as a device is marked as
"unknown", no sub-devices will be used and the device is considered
unsupported.
All the different sub-devices, including KEYS, RUMBLE, BATTERY, LEDS,
ACCELEROMETER, IR and more will be ported in follow-up patches to the new
module layer.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Our output queue is asynchronous but synchronous reports may wait for a
response to their request. Therefore, wake them up unconditionally if an
output report couldn't be sent. But keep the report ID intact so we don't
incorrectly assume our request succeeded.
Note that the underlying connection is required to be reliable and does
retransmission itself. So it is safe to assume that if the transmission
fails, the device is in inconsistent state. Hence, we abort every request
if any output report fails. No need to verify which report failed.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Battery reports are sent along every status report of the Wii Remote.
So chances are pretty high that we have an up-to-date battery
cache at any time. Therefore, initialize the battery-cache to 100% and
then return battery values from the cache if the query fails.
This works around a power_supply limitation in that it requires us to be
able to query the device during power_supply registration and
removal. Otherwise, "add" or "remove" udev events are not sent. If
we answer these requests from our cache instead, we avoid dropping these
events and no longer cause warnings printed.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Nintendo produced many different devices that are internally based on the
Wii Remote protocol but provide different peripherals. To support these
devices, we need to schedule a device detection during initialization.
Device detection includes requesting a status report, reading extension
information and then evaluating which device we may be dealing with.
We currently detect gen1 and gen2 Wii Remote devices. All other devices
are marked as generic devices. More detections will be added later.
In followup patches we will be using these device IDs to control which
peripherals to initialize. For instance if a device is known to have no IR
camera, there is no need to provide the IR input device nor trying to
access IR registers. In fact, there are 3rd party devices that break if we
try things like this (hurray!).
The init_worker will be scheduled whenever we get hotplug events. This
isn't implemented, yet and will be added later. However, we need to make
sure that this worker can be called multiple times.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
We need constant I/O to keep the state up-to-date and not miss any
packets. Hence, call hid_hw_open() during setup and hid_hw_close() during
destruction.
These are no-ops for Bluetooth HIDP, but lets be safe.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The output queue is independent of the other wiimote modules and can run
on its own. Therefore, move its members into a separate struct so we don't
run into name collisions with other modules.
This is only a syntactic change that renames all queue members to queue.*.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | |/
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The hid-wiimote driver supports more than the Wii Remote. Nintendo
produced many devices based on the Wii Remote, which have extension
devices built-in. It is not clear to many users, that these devices have
anything in common with the Wii Remote, so fix the driver description.
This also updates the copyright information for the coming hotplugging
rework.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Intuos4 WL is separately reporting power supply and battery
charging status - now hid-wacom is using that information.
Previously hid-wacom was wrongly treating "battery charging" bit
as "power supply connected". Now it should report battery charging,
battery discharging, battery full and power supply status.
Intuos4 WL sends reports when is in use (obvious) and when unplugging
power supply. If means that if the device is being charged, but it's not
being used it will never report "battery full". The same problem happens
after the device has been connected, but it's not in use - the
battery/ac status will be incorrect. Currently there is no mechanism to
ask the device to send a report containing battery/ac status.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | | |
| | \ \ | |
| | \ \ | |
| | \ \ | |
| |\ \ \ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
'for-3.11/upstream' into for-linus
Conflicts:
drivers/hid/hid-core.c
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Genius Gila Gaming Mouse presents an obviously wrong report descriptor.
the Consumer control (report ID 3) is the following:
0x05, 0x0c, // Usage Page (Consumer Devices) 105
0x09, 0x01, // Usage (Consumer Control) 107
0xa1, 0x01, // Collection (Application) 109
0x85, 0x03, // Report ID (3) 111
0x19, 0x00, // Usage Minimum (0) 113
0x2a, 0xff, 0x7f, // Usage Maximum (32767) 115
0x15, 0x00, // Logical Minimum (0) 118
0x26, 0xff, 0x7f, // Logical Maximum (32767) 120
0x75, 0x10, // Report Size (16) 123
0x95, 0x03, // Report Count (3) 125
0x81, 0x00, // Input (Data,Arr,Abs) 127
0x75, 0x08, // Report Size (8) 129
0x95, 0x01, // Report Count (1) 131
0x81, 0x01, // Input (Cnst,Arr,Abs) 133
0xc0, // End Collection 135
So the first input whithin this report has a count of 3 but a usage range
of 32768. So this value is obviously wrong as it should not be greater than
the report count.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=959721
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Extend the comment explaining the condition for discarding
out-of-range values to clarify the cases in which devices don't
provide any logical min/max.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Commit 6da7066906e977d42104a859c490f5f9a300488c introduced in 3.3
"HID: ignore absolute values which don't fit between logical min and max"
prevents some Posiflex touch screen to work because they do not provide
logical min and max for their buttons.
Thus, logical min and max are at 0, discarding the buttons events, and
preventing the device to report appropriate X Y.
Adding a check on "min < max" solves the problem.
Reported-by: Jan Kandziora <jjj@gmx.de>
Tested-by: Jan Kandziora <jjj@gmx.de>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Return value of cdev_add in hid_roccat.c init was not checked.
Signed-off-by: Michael Rissi <michael.rissi@dectris.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
hdrw->raw event can return three different return value types:
- ret < 0 indicates that the hdrv driver found an error while parsing
- ret == 0 indicates no error has been encountered, and the driver has
processed the report
- ret > 0 indicates that there was no parsing error, and the driver hasn't
processed the event.
Calling hid_report_raw_event() has to be called appropriately so that it
reflects what has been done by ->raw_event() callback, otherwise we might
updates of the in-kernel structure are lost upon arrival of the report, which
is wrong.
Reported-and-tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reported-and-tested-by: Daniel Leung <daniel.leung@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Add hid-huion.c with support for Huion 580 tablet, which is simple
8x5" tablet with 4000LPI resolution and 2048 levels pressure-sensitive
pen manufactured by the Chinese company Huion.
The driver fixes incorrect report descriptor sent by the device,
performs custom initialization required to switch the tablet into
its native resolution mode and inverts the in-range bit.
Signed-off-by: Martin Rusko <martin.rusko@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | | |/
| | | |/|
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Add a quirk to ignore Jabra speakerphone 410 and 510 devices HID
interface.
On those devices, the USB audio interface is working nicely,
but the HID interface is not working with the kernel usbhid driver,
and it requires a specific userspace program.
We could unbind it from userspace but just attaching the usbhid driver has
sometimes nasty effects:
either confusing the device state machine or triggering a storm of volume key
events making eventual sound UI blinking like crazy.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Let's follow the structure we are trying to keep for most of the
specific HID drivers, and let the separation follow the producing
vendor.
Merge functionality provided by ps3remote driver into hid-sony.
Tested-by: David Dillow <dave@thedillows.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
