summaryrefslogtreecommitdiffstats
path: root/drivers/gpio/gpio-pcf857x.c
Commit message (Collapse)AuthorAgeFilesLines
* gpio: pcf857x: restore the initial line state of all pcf linesKishon Vijay Abraham I2016-06-071-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The reset values for all the PCF lines are high and hence on shutdown we should drive all the lines high in order to bring it to the reset state. This is actually required since PCF doesn't have a reset line and even after warm reset (by invoking "reboot" in prompt) the PCF lines maintains it's previous programmed state. This becomes a problem if the boards are designed to work with the default initial state. DRA7XX_evm uses PCF8575 and one of the PCF output lines feeds to MMC/SD VDD and this line should be driven high in order for the MMC/SD to be detected. This line is modelled as regulator and the hsmmc driver takes care of enabling and disabling it. In the case of 'reboot', during shutdown path as part of it's cleanup process the hsmmc driver disables this regulator. This makes MMC *boot* not functional. Fix it by driving all the pcf lines high. This patch was sent long back (https://patchwork.ozlabs.org/patch/420382/) But there was a concern that contention might occur if the PCF shutdown handler is invoked before the shutdown handler of the PCF's consumers. In that case PCF shutdown handler can't drive all the pcf lines high without knowing if the PCF consumers are still active. However commit 52cdbdd4985 ("driver core: correct device's shutdown order") will make sure shutdown handler of PCF's consumers are invoked before invoking the shutdown handler of PCF. So it should be safe to merge this now. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: Use devm_gpiochip_add_data() for gpio registrationLaxman Dewangan2016-02-231-7/+3
| | | | | | | Use devm_gpiochip_add_data() for GPIO registration and clean the error path. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
* gpio: pcf857x: use gpiochip data pointerLinus Walleij2016-01-051-4/+4
| | | | | | | | | | | This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: George Cherian <george.cherian@ti.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: Be sure to clamp return valueLinus Walleij2015-12-261-1/+1
| | | | | | | | | | | | | | | As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Also start returning the error code if something fails, as the end of the series augment the core to support this. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: George Cherian <george.cherian@ti.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: Restore indentation of parent device setupGeert Uytterhoeven2015-12-111-1/+1
| | | | | | Fixes: 58383c78425e4ee1 ("gpio: change member .dev to .parent") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: Drop owner assignment from i2c_driverKrzysztof Kozlowski2015-11-301-1/+0
| | | | | | | | i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: change member .dev to .parentLinus Walleij2015-11-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: get rid of slock spinlockGrygorii Strashko2015-07-161-9/+5
| | | | | | | | | | | The spinlock 'slock' is used now to protect pcf857x_irq() from itself which is unnecessary (especially after switching to use threaded IRQs). Hence, remove it and use mutex to protect device data in IRQ handler. Cc: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: handle only enabled irqsGrygorii Strashko2015-06-161-11/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | Now pcf857x_irq() IRQ's dispatcher will try to run nested IRQ handlers for each GPIO pin which state has changed. Such IRQs are, actually, spurious and nested IRQ handlers have to be called only for IRQs wich were enabled by users. This is not critical issue - just /proc/interrupts will display counters for unused IRQS: 399: 4 0 pcf857x 0 Edge 428: 1 0 pcf857x 13 Edge 430: 1 0 pcf857x 15 Edge Hence, fix it by adding irq_enabled field in struct pcf857x to track enabled GPIO IRQs and corresponding callbacks in pcf857x_irq_chip. Similar functionality was presented in pcf857x driver, commit 21fd3cd1874a ('gpio: pcf857x: call the gpio user handler iff...') and then it was removed by commit a39294bdf4b0 ('gpio: pcf857x: Switch to use gpiolib irqchip...') Cc: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: a39294bdf4b0 ('gpio: pcf857x: Switch to use gpiolib irqchip helpers') Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: Check for irq_set_irq_wake() failuresGeert Uytterhoeven2015-06-011-2/+14
| | | | | | | | | | | | | | | | If an interrupt controller doesn't support wake-up configuration, irq_set_irq_wake() returns an error code. Then any subsequent call trying to deconfigure wake-up will cause an imbalance, and a warning will be printed: WARNING: CPU: 1 PID: 1341 at kernel/irq/manage.c:540 irq_set_irq_wake+0x Unbalanced IRQ 26 wake disable To fix this, refrain from any further parent interrupt controller (de)configuration if irq_set_irq_wake() failed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: Propagate wake-up setting to parent irq controllerGeert Uytterhoeven2015-03-041-3/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | The pcf857x GPIO and interrupt controller uses dummy_irq_chip, which does not implement irq_chip.irq_set_wake() and does not set IRQCHIP_SKIP_SET_WAKE. This causes two s2ram issues if wake-up is enabled for the pcf857x GPIO pins: 1. During resume from s2ram, the following warning is printed: WARNING: CPU: 0 PID: 1046 at kernel/irq/manage.c:537 irq_set_irq_wake+0x9c/0xf8() Unbalanced IRQ 113 wake disable 2. Wake-up through the pcf857x GPIO pins may fail, as the parent interrupt controller may be suspended. Migrate the pcf857x GPIO and interrupt controller from dummy_irq_chip to its own irq_chip. This irq chip implements irq_chip.irq_set_wake() to propagate its wake-up setting to the parent interrupt controller. This fixes wake-up through gpio-keys on sh73a0/kzm9g, where the pcf857x interrupt is cascaded to irq-renesas-intc-irqpin, and the latter must not be suspended when wake-up is enabled. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: Switch to use gpiolib irqchip helpersGeert Uytterhoeven2015-03-041-94/+27
| | | | | | | | | | | | | | Switch the PCF857x GPIO driver to use the gpiolib irqchip helpers. This driver uses a nested threaded interrupt, hence handle_nested_irq() and gpiochip_set_chained_irqchip() must be used. Note that this removes the checks added in commit 21fd3cd1874a2ac8 ("gpio: pcf857x: call the gpio user handler iff gpio_to_irq is done"), as the interrupt mappings are no longer created on-demand by the driver, but by gpiochip_irqchip_add() during initialization. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: remove all usage of gpio_remove retval in driver/gpioabdoulaye berthe2014-07-221-3/+1
| | | | | Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: Add IRQF_SHARED when request irqGeorge Cherian2014-05-281-1/+1
| | | | | | | | | It's quite possible that multiple pcf857x can be hooked up to the same interrupt line with the processor. So add IRQF_SHARED in request irq.. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: Avoid calling irq_domain_cleanup twiceGeorge Cherian2014-05-281-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently irq_domain_cleanup is called twice if irq_domain_init fails. This causes the following crash. Unable to handle kernel paging request at virtual address 00100104 pgd = c0004000 [00100104] *pgd=00000000 Internal error: Oops: 805 [#1] SMP ARM Modules linked in: CPU: 0 PID: 6 Comm: kworker/u4:0 Not tainted 3.12.15-01889-gedd10a8-dirty #4 Workqueue: deferwq deferred_probe_work_func task: ed0ee800 ti: ed116000 task.ti: ed116000 PC is at irq_domain_remove+0x3c/0x8c LR is at 0x0 pc : [<c0089734>] lr : [<00000000>] psr: a0000013 sp : ed117b50 ip : 00100100 fp : ed117b64 r10: ed5d1a04 r9 : 00000008 r8 : 00000000 r7 : ffffffea r6 : ed5d1a20 r5 : ed5d1a00 r4 : ed5e7540 r3 : 00200200 r2 : 00100100 r1 : c08aa180 r0 : 00200200 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 8000406a DAC: 00000017 Process kworker/u4:0 (pid: 6, stack limit = 0xed116248) Stack: (0xed117b50 to 0xed118000) 7b40: 0000016b ed5d5f10 ed117b74 ed117b68 7b60: c02c8910 c0089704 ed117bb4 ed117b78 c02c8e14 c02c8900 ed5d1a04 ed5d4e80 ... <snip> ... fe0: 00000000 00000000 00000000 00000000 00000013 00000000 384a13ea 1590210a Backtrace: [<c00896f8>] (irq_domain_remove+0x0/0x8c) from [<c02c8910>] (pcf857x_irq_domain_cleanup+0x1c/0x20) r4:ed5d5f10 r3:0000016b [<c02c88f4>] (pcf857x_irq_domain_cleanup+0x0/0x20) from [<c02c8e14>] (pcf857x_probe+0x2a8/0x364) [<c02c8b6c>] (pcf857x_probe+0x0/0x364) from [<c04787ac>] (i2c_device_probe+0x80/0xc0) [<c047872c>] (i2c_device_probe+0x0/0xc0) from [<c036c33c>] (driver_probe_device+0x104/0x240) r6:00000000 r5:ed5d1a20 r4:c08c709c r3:c047872c [<c036c238>] (driver_probe_device+0x0/0x240) from [<c036c558>] (__device_attach+0x48/0x4c) r7:ed4fc480 r6:c036c510 r5:ed5d1a20 r4:c0866bb8 [<c036c510>] (__device_attach+0x0/0x4c) from [<c036a6d8>] (bus_for_each_drv+0x4c/0x94) r5:ed5d1a20 r4:00000000 [<c036a68c>] (bus_for_each_drv+0x0/0x94) from [<c036c1f4>] (device_attach+0x78/0x90) r6:c087fe50 r5:ed5d1a54 r4:ed5d1a20 [<c036c17c>] (device_attach+0x0/0x90) from [<c036b76c>] (bus_probe_device+0x8c/0xb4) r6:c087fe50 r5:ed5d1a20 r4:ed5d1a20 r3:ed17e1c0 [<c036b6e0>] (bus_probe_device+0x0/0xb4) from [<c0369888>] (device_add+0x34c/0x624) r6:ed5d1a28 r5:00000000 r4:ed5d1a20 r3:fffffffe [<c036953c>] (device_add+0x0/0x624) from [<c0369b7c>] (device_register+0x1c/0x20) ... <snip> ... [<c0060844>] (process_one_work+0x0/0x37c) from [<c0061040>] (worker_thread+0x13c/0x3c4) [<c0060f04>] (worker_thread+0x0/0x3c4) from [<c00670ec>] (kthread+0xac/0xb8) [<c0067040>] (kthread+0x0/0xb8) from [<c00148b8>] (ret_from_fork+0x14/0x3c) r7:00000000 r6:00000000 r5:c0067040 r4:ed105d20 Code: e59fc04c e591e000 e59f0048 e154000e (e5823004) ---[ end trace 59dd1e90032c4217 ]--- Signed-off-by: George Cherian <george.cherian@ti.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio/pinctrl: make gpio_chip members typed booleanLinus Walleij2013-12-041-1/+1
| | | | | | | | | | | This switches the two members of struct gpio_chip that were defined as unsigned foo:1 to bool, because that is indeed what they are. Switch all users in the gpio and pinctrl subsystems to assign these values with true/false instead of 0/1. The users outside these subsystems will survive since true/false is 1/0, atleast we set some kind of more strict typing example. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: Add OF supportLaurent Pinchart2013-09-231-8/+36
| | | | | | | | Add DT bindings for the pcf857x-compatible chips and parse the device tree node in the driver. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: only use set_irq_flags() on ARMLinus Walleij2013-09-181-3/+7
| | | | | | | | | | | | | | As per the pattern from other GPIO drivers, use set_irq_flags() on ARM only, use irq_set_noprobe() on other archs. Also rename the argument "virq" to just "irq", this IRQ isn't any more "virtual" than any other Linux IRQ number, we use "hwirq" for the actual hw-numbers, "virq" is just bogus. Cc: George Cherian <george.cherian@ti.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: call the gpio user handler iff gpio_to_irq is doneGeorge Cherian2013-09-171-3/+19
| | | | | | | | | | | | | | | | | | | | | For pcf857x driver if the initial state is not set properly (proper n_latch is not passed), we get bad irq prints on console. We get this only for the first interrupt and doesnot repeat for further interrupts unles and until there are other gpio pins which are not flipping continously. following prints are seen on console. [ 40.983924] irq 0, desc: ce004080, depth: 1, count: 0, unhandled: 0 [ 40.990511] ->handle_irq(): c00aa538, handle_bad_irq+0x0/0x260 [ 40.996768] ->irq_data.chip(): c080b6ec, no_irq_chip+0x0/0x60 [ 41.002842] ->action(): (null) [ 41.006242] IRQ_NOPROBE set [ 41.009465] IRQ_NOREQUEST set Signed-off-by: George Cherian <george.cherian@ti.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: remove the irq_demux_work and gpio->irqGeorge Cherian2013-09-171-37/+0
| | | | | | | | | Now that we are using devm_request_threaded_irq no need for irq_demux_work and gpio->irq. Remove all its references. Signed-off-by: George Cherian <george.cherian@ti.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: change to devm_request_threaded_irqGeorge Cherian2013-09-171-4/+24
| | | | | | | | | Remove the request_irq and use devm_request_threaded_irq also cleanup free_irq. devm_* takes care of that. Signed-off-by: George Cherian <george.cherian@ti.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: Remove pdata argument to pcf857x_irq_domain_init()Laurent Pinchart2013-08-231-5/+4
| | | | | | | | | The argument is not used, remove it. No board registers a pcf857x device with an IRQ without specifying platform data, IRQ domain registration behaviour is thus not affected by this change. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: Sort headers alphabeticallyLaurent Pinchart2013-08-231-2/+2
| | | | | | | This makes checking for duplicates when adding a new #include easier. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: use dev_get_platdata()Jingoo Han2013-08-161-2/+2
| | | | | | | | Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: use devm_kzalloc()Jingoo Han2013-03-271-5/+2
| | | | | | | Use devm_kzalloc() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Add TI TCA9554 to supported devices tableNikolay Balandin2013-03-271-0/+1
| | | | | | Signed-off-by: Nikolay Balandin <nbalandin@dev.rtsoft.ru> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: use client->irq for gpio_to_irq()Kuninori Morimoto2012-12-071-18/+11
| | | | | | | | | | | | | | | | 6e20a0a429bd4dc07d6de16d9c247270e04e4aa0 (gpio: pcf857x: enable gpio_to_irq() support) added gpio_to_irq() support on pcf857x driver, but it used pdata->irq. This patch modifies driver to use client->irq instead of it. It modifies kzm9g board platform settings, and device probe information too. This patch is tested on kzm9g board Reported-by: Christian Engelmayer <christian.engelmayer@frequentis.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: fixup smatch WARNINGKuninori Morimoto2012-09-121-3/+3
| | | | | | | | | | | | | | | | | | | 6e20a0a429bd4dc07d6de16d9c247270e04e4aa0 (gpio: pcf857x: enable gpio_to_irq() support) added new smatch warnings drivers/gpio/gpio-pcf857x.c:288 pcf857x_probe() error: we previously \ assumed 'pdata' could be null (see line 277) drivers/gpio/gpio-pcf857x.c:364 pcf857x_probe() warn: variable dereferenced\ before check 'pdata' (see line 292) drivers/gpio/gpio-pcf857x.c:421 pcf857x_remove() error: we previously\ assumed 'pdata' could be null (see line 410) This patch fixes it Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: enable gpio_to_irq() supportKuninori Morimoto2012-08-231-0/+122
| | | | | | | | | | | pcf857x chip has some pins, but interrupt pin is only 1 pin. And gpiolib requests 1 interrupt per 1 gpio pin. Thus, this patch added demuxed irq to pcf857x driver, and enabled gpio_to_irq(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: share 8/16 bit access functionsKuninori Morimoto2012-07-121-62/+31
| | | | | | | | This patch adds 8/16 bit write/read functions, and shared gpio input/output/set/get functions. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpiolib: output basic details and consolidate gpio device driversGrant Likely2011-12-121-4/+1
| | | | | | | | | | | | | | | | | This patch adds a kernel message, containing GPIO range and device name on successful device registration, and removes duplicate messages from the following drivers: * gpio-adp5588 * gpio-bt8xx * gpio-cs5535 * gpio-janz-ttl * gpio-nomadik * gpio-pcf857x * gpio-xilinx * drivers/of/gpio.c Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> [grant.likely@secretlab.ca: squashed 2 patches together] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* drivers/gpio: Fix drivers who are implicit users of module.hPaul Gortmaker2011-10-311-0/+1
| | | | | | | | A pending cleanup will mean that module.h won't be implicitly everywhere anymore. Make sure the modular drivers in gpio are actually calling out for <module.h> explicitly in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* gpio: reorganize driversGrant Likely2011-06-061-0/+369
Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
OpenPOWER on IntegriCloud