summaryrefslogtreecommitdiffstats
path: root/arch
Commit message (Collapse)AuthorAgeFilesLines
* x86_64: make ptrace always sign-extend orig_ax to 64 bitsRoland McGrath2008-03-071-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | This makes 64-bit ptrace calls setting the 64-bit orig_ax field for a 32-bit task sign-extend the low 32 bits up to 64. This matches what a 64-bit debugger expects when tracing a 32-bit task. This follows on my "x86_64 ia32 syscall restart fix". This didn't matter until that was fixed. The debugger ignores or zeros the high half of every register slot it sets (including the orig_rax pseudo-register) uniformly. It expects that the setting of the low 32 bits always has the same meaning as a 32-bit debugger setting those same 32 bits with native 32-bit facilities. This never arose before because the syscall restart check never matched any -ERESTART* values due to lack of sign extension. Before that fix, even 32-bit ptrace setting orig_eax to -1 failed to trigger the restart check anyway. So this was never noticed as a regression of 64-bit debuggers vs 32-bit debuggers on the same 64-bit kernel. Signed-off-by: Roland McGrath <roland@redhat.com> [ Changed to just do the sign-extension unconditionally on x86-64, since orig_ax is always just a small integer and doesn't need the full 64-bit range ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* x86-boot: don't request VBE2 informationPeter Korsgaard2008-03-072-10/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new x86 setup code (4fd06960f120) broke booting on an old P3/500MHz with an onboard Voodoo3 of mine. After debugging it, it turned out to be caused by the fact that the vesa probing now asks for VBE2 data. Disassembing the video BIOS shows that it overflows the vesa_general_info structure when VBE2 data is requested because the source addresses for the information strings which get strcpy'ed to the buffer lie outside the 32K BIOS code (and hence contain long sequences of 0xff's). E.G.: get_vbe_controller_info: 00002A9C 60 pushaw 00002A9D 1E push ds 00002A9E 0E push cs 00002A9F 1F pop ds 00002AA0 2BC9 sub cx,cx 00002AA2 6626813D56424532 cmp dword [es:di],0x32454256 ; "VBE2" 00002AAA 7501 jnz .1 00002AAC 41 inc cx .1: 00002AAD 51 push cx 00002AAE B91400 mov cx,0x14 00002AB1 BED47F mov si, controller_header 00002AB4 57 push di 00002AB5 F3A4 rep movsb ; copy vbe1.2 header 00002AB7 B9EC00 mov cx,0xec 00002ABA 2AC0 sub al,al 00002ABC F3AA rep stosb ; zero pad remainder 00002ABE 5F pop di 00002ABF E8EB0D call word get_memory 00002AC2 C1E002 shl ax,0x2 00002AC5 26894512 mov [es:di+0x12],ax ; total memory 00002AC9 26C745040003 mov word [es:di+0x4],0x300 ; VBE version 00002ACF 268C4D08 mov [es:di+0x8],cs 00002AD3 268C4D10 mov [es:di+0x10],cs 00002AD7 59 pop cx 00002AD8 E361 jcxz .done ; VBE2 requested? 00002ADA 8D9D0001 lea bx,[di+0x100] 00002ADE 53 push bx 00002ADF 87DF xchg bx,di ; di now points to 2nd half 00002AE1 26C747140001 mov word [es:bx+0x14],0x100 ; sw rev 00002AE7 26897F06 mov [es:bx+0x6],di ; oem string 00002AEB 268C4708 mov [es:bx+0x8],es 00002AEF BE5280 mov si,0x8052 ; oem string 00002AF2 E87A1B call word strcpy 00002AF5 26897F0E mov [es:bx+0xe],di ; video mode list 00002AF9 268C4710 mov [es:bx+0x10],es 00002AFD B91E00 mov cx,0x1e 00002B00 BEE87F mov si,vidmodes 00002B03 F3A5 rep movsw 00002B05 26897F16 mov [es:bx+0x16],di ; oem vendor 00002B09 268C4718 mov [es:bx+0x18],es 00002B0D BE2480 mov si,0x8024 ; oem vendor 00002B10 E85C1B call word strcpy 00002B13 26897F1A mov [es:bx+0x1a],di ; oem product 00002B17 268C471C mov [es:bx+0x1c],es 00002B1B BE3880 mov si,0x8038 ; oem product 00002B1E E84E1B call word strcpy 00002B21 26897F1E mov [es:bx+0x1e],di ; oem product rev 00002B25 268C4720 mov [es:bx+0x20],es 00002B29 BE4580 mov si,0x8045 ; oem product rev 00002B2C E8401B call word strcpy 00002B2F 58 pop ax 00002B30 B90001 mov cx,0x100 00002B33 2BCF sub cx,di 00002B35 03C8 add cx,ax 00002B37 2AC0 sub al,al 00002B39 F3AA rep stosb ; zero pad .done: 00002B3B 1F pop ds 00002B3C 61 popaw 00002B3D B84F00 mov ax,0x4f 00002B40 C3 ret (The full BIOS can be found at http://peter.korsgaard.com/vgabios.bin if interested). The old setup code didn't ask for VBE2 info, and the new code doesn't actually do anything with the extra information, so the fix is to simply not request it. Other BIOS'es might have the same problem. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86: re-add reboot fixupsIngo Molnar2008-03-071-0/+6
| | | | | | | | | | | | | | Jan Beulich noticed that the reboot fixups went missing during reboot.c unification. (commit 4d022e35fd7e07c522c7863fee6f07e53cf3fc14) Geode and a few other rare boards with special reboot quirks are affected. Reported-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86: fix typo in step.cJan Beulich2008-03-071-2/+2
| | | | | | | TIF_DEBUGCTLMSR has no meaning in the actual MSR... Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86: fix merge mistake in i387.cJan Beulich2008-03-071-1/+1
| | | | | | | | | | | | | | | | | | | | convert_fxsr_to_user() in 2.6.24's i387_32.c did this, and convert_to_fxsr() also does the inverse, so I assume it's an oversight that it is no longer being done. [ mingo@elte.hu: we encode it this way because there's no space for the 'FPU Last Instruction Opcode' (->fop) field in the legacy user_i387_ia32_struct that PTRACE_GETFPREGS/PTRACE_SETFPREGS uses. it's probably pure legacy - i'd be surprised if any user-space relied on the FPU Last Opcode in any way. But indeed we used to do it previously so the most conservative thing is to preserve that piece of information. ] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86: clear DF before calling signal handlerAurelien Jarno2008-03-073-5/+5
| | | | | | | | | | | | | | | | The Linux kernel currently does not clear the direction flag before calling a signal handler, whereas the x86/x86-64 ABI requires that. Linux had this behavior/bug forever, but this becomes a real problem with gcc version 4.3, which assumes that the direction flag is correctly cleared at the entry of a function. This patches changes the setup_frame() functions to clear the direction before entering the signal handler. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: H. Peter Anvin <hpa@zytor.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.25Linus Torvalds2008-03-0629-907/+619
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.25: sh: Fix up the sh64 build. sh: Fix up SH7710 VoIP-GW build. sh: Flag PMB support as EXPERIMENTAL. sh: Update r7780mp defconfig. fb: hitfb: Balance probe/remove section annotations. sh: hp6xx: Fix up hp6xx_apm build failure. fb: pvr2fb: Fix up remaining section mismatch. sh: Fix up section mismatches. sh: hp6xx: Correct APM output. sh: update se7780 defconfig sh: replace remaining __FUNCTION__ occurrences sh: export copy-page() to modules sh_ksyms_32.c update for gcc 4.3 sh/mm/pg-sh7705.c must #include <linux/fs.h>
| * sh: Fix up the sh64 build.Paul Mundt2008-03-061-14/+7
| | | | | | | | Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * sh: Fix up SH7710 VoIP-GW build.Paul Mundt2008-03-066-449/+250
| | | | | | | | | | | | | | | | | | The only board-specific bits that existed here were for setting up the IRQs, which are now handled by the SH7710 CPU support code instead. As there's nothing else to do for setup, kill off the board support code and have the defconfig use the generic machvec instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * sh: Flag PMB support as EXPERIMENTAL.Paul Mundt2008-03-061-1/+1
| | | | | | | | | | | | | | There's still work that needs to be done here, and this should not be enabled by default on existing boards. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * sh: Update r7780mp defconfig.Paul Mundt2008-03-061-25/+66
| | | | | | | | | | | | | | | | This disables the PMB/32BIT=y by default in r7780mp, as turning this on presently results in build errors (for an admittedly experimental feature). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * sh: hp6xx: Fix up hp6xx_apm build failure.Paul Mundt2008-03-061-0/+2
| | | | | | | | Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * sh: Fix up section mismatches.Paul Mundt2008-03-062-2/+2
| | | | | | | | Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * sh: hp6xx: Correct APM output.Kristoffer Ericson2008-03-061-6/+14
| | | | | | | | | | | | | | | | | | This patch fixes the old non-verbose hp6xx apm code and enables some very basic apm output. We now get percentage (battery) output and basic time estimate. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * sh: update se7780 defconfiggoda.yusuke2008-03-061-391/+255
| | | | | | | | | | | | | | This patch updates se7780_defconfig Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * sh: replace remaining __FUNCTION__ occurrencesHarvey Harrison2008-03-0613-17/+17
| | | | | | | | | | | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * sh: export copy-page() to modulesAndrew Morton2008-03-062-0/+2
| | | | | | | | | | | | | | | | | | | | ERROR: "copy_page" [fs/unionfs/unionfs.ko] undefined! like all the other architectures. Cc: Erez Zadok <ezk@cs.sunysb.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * sh_ksyms_32.c update for gcc 4.3Adrian Bunk2008-03-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the following build error with landisk_defconfig when using gcc 4.3: <-- snip --> ... MODPOST 50 modules ERROR: "__udivsi3_i4i" [net/sunrpc/sunrpc.ko] undefined! ERROR: "__udivsi3_i4i" [net/appletalk/appletalk.ko] undefined! ERROR: "__udivsi3_i4i" [fs/ufs/ufs.ko] undefined! ERROR: "__udivsi3_i4i" [fs/ntfs/ntfs.ko] undefined! ERROR: "__sdivsi3_i4i" [fs/ntfs/ntfs.ko] undefined! ERROR: "__udivsi3_i4i" [fs/nfsd/nfsd.ko] undefined! ERROR: "__sdivsi3_i4i" [fs/nfsd/nfsd.ko] undefined! ERROR: "__udivsi3_i4i" [fs/nfs/nfs.ko] undefined! ERROR: "__udivsi3_i4i" [fs/lockd/lockd.ko] undefined! ERROR: "__udivsi3_i4i" [drivers/usb/storage/usb-storage.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/usb/serial/pl2303.ko] undefined! ERROR: "__udivsi3_i4i" [drivers/usb/serial/pl2303.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/usb/serial/ftdi_sio.ko] undefined! ERROR: "__udivsi3_i4i" [drivers/usb/misc/sisusbvga/sisusbvga.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/usb/misc/sisusbvga/sisusbvga.ko] undefined! ERROR: "__udivsi3_i4i" [drivers/media/video/v4l1-compat.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/media/video/v4l1-compat.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/media/video/usbvideo/vicam.ko] undefined! ERROR: "__udivsi3_i4i" [drivers/media/video/usbvideo/usbvideo.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/media/video/usbvideo/usbvideo.ko] undefined! ERROR: "__udivsi3_i4i" [drivers/media/video/sn9c102/sn9c102.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/media/video/sn9c102/sn9c102.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/media/video/se401.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/media/video/pwc/pwc.ko] undefined! ERROR: "__udivsi3_i4i" [drivers/md/raid0.ko] undefined! ERROR: "__udivsi3_i4i" [drivers/md/md-mod.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/md/md-mod.ko] undefined! ERROR: "__udivsi3_i4i" [drivers/md/linear.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/hid/usbhid/usbhid.ko] undefined! make[2]: *** [__modpost] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <adrian.bunk@movial.fi> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * sh/mm/pg-sh7705.c must #include <linux/fs.h>Adrian Bunk2008-03-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the following compile error: <-- snip --> ... CC arch/sh/mm/pg-sh7705.o /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/mm/pg-sh7705.c: In function 'ptep_get_and_clear': /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/mm/pg-sh7705.c:130: error: implicit declaration of function 'mapping_writably_mapped' make[2]: *** [arch/sh/mm/pg-sh7705.o] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <adrian.bunk@movial.fi> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2008-03-063-9/+12
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: [Blackfin] arch: current_l1_stack_save is a pointer, so use NULL rather than 0 [Blackfin] arch: fix atomic and32/xor32 comments and ENDPROC markings [Blackfin] arch: fix bug - allow SDH driver to be used as module [Blackfin] arch: to kill syscalls missing warning by adding new timerfd syscalls
| * | [Blackfin] arch: fix atomic and32/xor32 comments and ENDPROC markingsMike Frysinger2008-03-031-6/+6
| | | | | | | | | | | | | | | | | | Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
| * | [Blackfin] arch: fix bug - allow SDH driver to be used as moduleMichael Hennerich2008-03-031-2/+2
| | | | | | | | | | | | | | | | | | Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
| * | [Blackfin] arch: to kill syscalls missing warning by adding new timerfd syscallsBryan Wu2008-03-061-1/+4
| |/ | | | | | | | | Signed-off-by: Bryan Wu <cooloney@kernel.org>
* | Merge branch 'release' of ↵Linus Torvalds2008-03-0630-462/+281
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] kprobes arch consolidation build fix [IA64] update efi region debugging to use MB, GB and TB as well as KB [IA64] use dev_printk in video quirk [IA64] remove remaining __FUNCTION__ occurrences [IA64] remove unnecessary nfs includes from sys_ia32.c [IA64] remove CONFIG_SMP ifdef in ia64_send_ipi() [IA64] arch_ptrace() cleanup [IA64] remove duplicate code from arch_ptrace() [IA64] convert sys_ptrace to arch_ptrace [IA64] remove find_thread_for_addr() [IA64] do not sync RBS when changing PT_AR_BSP or PT_CFM [IA64] access user RBS directly
| * | [IA64] kprobes arch consolidation build fixHarvey Harrison2008-03-062-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | ia64 named their handler kprobes_fault_handler while all other arches used kprobe_fault_handler. Change the function definition and header declaration. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] update efi region debugging to use MB, GB and TB as well as KBSimon Horman2008-03-061-4/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When EFI_DEBUG is defined to a non-zero value in arch/ia64/kernel/efi.c, the efi memory regions are displayed. This patch enhances the display code in a few ways: 1. Use TB, GB and MB as well as KB as units. Although this introduces rounding errors (KB doesn't as size is always a multiple of 4Kb), it does make things a lot more readable. Also as the range is also shown, it is possible to note the exact size if it is important. In my experience, the size field is mostly useful for getting a general idea of the size of a region. On the rx2620 that I use, there actually is an 8TB region (though not backed by physical memory, and 8TB really is a lot more readable than 8589934592KB. 2. pad the size field with leading spaces to further improve readability ... ... ( 8MB) ... ( 928MB) ... ( 3MB) ... vs ... ... (8MB) ... (928MB) ... (3MB) ... 3. Pad the attr field out to 64bits using leading zeros, to further improve readability. ... mem05: type= 2, attr=0x0000000000000008, range=[0x0000000004000000-0x000000000481f000) ( 8MB) mem06: type= 7, attr=0x0000000000000008, range=[0x000000000481f000-0x000000003e876000) ( 928MB) mem07: type= 5, attr=0x8000000000000008, range=[0x000000003e876000-0x000000003eb8e000) ( 3MB) mem08: type= 4, attr=0x0000000000000008, range=[0x000000003eb8e000-0x000000003ee7a000) ( 2MB) ... ... mem05: type= 2, attr=0x8, range=[0x0000000004000000-0x000000000481f000) ( 8MB) mem06: type= 7, attr=0x8, range=[0x000000000481f000-0x000000003e876000) ( 928MB) mem07: type= 5, attr=0x8000000000000008, range=[0x000000003e876000-0x000000003eb8e000) ( 3MB) mem08: type= 4, attr=0x8, range=[0x000000003eb8e000-0x000000003ee7a000) ( 2MB) ... 4. Use %d instead of %u for the index field, as i is a signed int. N.B: This code is not compiled unless EFI_DEBUG is non 0. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] use dev_printk in video quirkBjorn Helgaas2008-03-061-1/+1
| | | | | | | | | | | | | | | | | | | | | Convert quirk printks to dev_printk(). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] remove remaining __FUNCTION__ occurrencesHarvey Harrison2008-03-0626-191/+186
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | __FUNCTION__ is gcc-specific, use __func__ Long lines have been kept where they exist, some small spacing changes have been done. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] remove unnecessary nfs includes from sys_ia32.cKOSAKI Motohiro2008-03-061-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Compilation of 2.6.25-rc2-mm1 on ia64 generates many warnings. IA64 support 2 ELF format (IA64 binary and IA32 binary), thus if 2 elf related header included, cause many warning or error. about 2 week ago, J. Bruce Fields proposed this problem fixed patch. (http://marc.info/?l=linux-ia64&m=120329313305695&w=2) Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] remove CONFIG_SMP ifdef in ia64_send_ipi()Bjorn Helgaas2008-03-061-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When !CONFIG_SMP, cpu_physical_id() is ia64_get_lid(), which is functionally identical to (ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff so there's no need for two versions of this code. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] arch_ptrace() cleanupPetr Tesarik2008-03-051-59/+31
| | | | | | | | | | | | | | | | | | | | | Remove duplicate code, clean up goto's and indentation. Signed-off-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] remove duplicate code from arch_ptrace()Petr Tesarik2008-03-051-67/+29
| | | | | | | | | | | | | | | | | | | | | Remove all code which does exactly the same thing as ptrace_request(). Signed-off-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] convert sys_ptrace to arch_ptracePetr Tesarik2008-03-051-39/+3
| | | | | | | | | | | | | | | | | | | | | Convert sys_ptrace() to arch_ptrace(). Signed-off-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] remove find_thread_for_addr()Petr Tesarik2008-03-051-55/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | find_thread_for_addr() is no longer needed. It was only used to find the correct kernel RBS for a given memory address, but since the kernel RBS is not needed any longer, this function can go away. Signed-off-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] do not sync RBS when changing PT_AR_BSP or PT_CFMPetr Tesarik2008-03-051-16/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Syncing is no longer needed, because user RBS is already up-to-date. Actually, if a debugger modified the contents of the original RBS prior to changing PT_AR_BSP, the modifications would get overwritten. Signed-off-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] access user RBS directlyPetr Tesarik2008-03-051-30/+14
| |/ | | | | | | | | | | | | | | | | | | | | | | Because the user RBS of a process is now completely stored in user-mode when the process is ptrace-stopped, accesses to the RBS should no longer augment any part of the kernel RBS. This means we can get rid of most ia64_peek() and ia64_poke() calls. Signed-off-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Tony Luck <tony.luck@intel.com>
* | Merge branch 'fixes-25' of ↵Linus Torvalds2008-03-051-2/+6
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes-25' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] fix section mismatch warnings [CPUFREQ] Remove debugging message from e_powersaver [CPUFREQ] Fix missing cpufreq_cpu_put() call in ->store [CPUFREQ] Fix missing cpufreq_cpu_put() call in ->show
| * | [CPUFREQ] Remove debugging message from e_powersaverDave Jones2008-03-051-2/+6
| |/ | | | | | | | | | | | | | | | | We don't need to printk a message every time we transition. Leave the code there, but ifdef'd out, as it's useful when adding support for new processors. Reported-by: Petr Titěra <P.Titera@century.cz> Signed-off-by: Dave Jones <davej@redhat.com>
* | [S390] incorrect reipl nss name.Hongjie Yang2008-03-051-2/+6
| | | | | | | | | | | | | | | | | | | | /sys/firmware/reipl/nss/name contains the nss name when defsys or savesys command has been executed. If the defsys or savesys command fails the kernel_nss_name has to be cleared since a reipl on that nss name won't be possible. Signed-off-by: Hongjie Yang <hongjie@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] Load disabled wait psw if reipl fails.Michael Holzheu2008-03-051-0/+1
| | | | | | | | | | | | | | Normally this should not happen, but it's cleaner to do it that way. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] Fix IPL from NSS.Heiko Carstens2008-03-051-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | IPL from NSS didn't work because the memory detection routine omits any memory sections with a size lower than what MAX_ORDER defines. This causes the detection routine to skip the first memory segment which has a size of 1MB. Which later on will let the kernel think that there is no memory available at all. Since in addition the z/VM memory increment size is 1MB force MAX_ORDER to be 9, so we can support 1MB segments. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] Get rid of memcpy gcc warning workaround.Heiko Carstens2008-03-052-8/+7
| | | | | | | | | | | | | | | | | | | | Compile smp.o with -Wno-nonnull so gcc stops warning about memcpy being used with a null parameter. Also remove the workaround code and use a char * cast instead of a void * cast to do computations. Cc: Bastian Blank <bastian@waldi.eu.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] idle: Fix machine check handling in idle loop.Heiko Carstens2008-03-052-2/+4
| | | | | | | | | | | | | | | | | | | | | | If a machine check handling is pending when the idle loop is entered default_idle will be left with timer ticks and virtual timer disabled. Fix this by "calling" the idle_chain. Also a BUG_ON(!in_interrupt) in start_hz_timer must be removed since the function now gets called from non interrupt context as well. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] Update default configuration.Martin Schwidefsky2008-03-051-5/+13
|/ | | | Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2008-03-0410-220/+212
|\ | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC]: Fix link errors with gcc-4.3 sparc64: replace remaining __FUNCTION__ occurances sparc: replace remaining __FUNCTION__ occurances [SPARC]: Add reboot_command[] extern decl to asm/system.h [SPARC]: Mark linux_sparc_{fpu,chips} static.
| * [SPARC]: Fix link errors with gcc-4.3David S. Miller2008-03-033-207/+203
| | | | | | | | | | | | | | | | | | | | | | | | Reported by Adrian Bunk. Just like in changeset a3f9985843b674cbcb58f39fab8416675e7ab842 ("[SPARC64]: Move kernel unaligned trap handlers into assembler file.") we have to move the assembler bits into a seperate asm file because as far as the compiler is concerned these inline bits we're doing in unaligned.c are unreachable. Signed-off-by: David S. Miller <davem@davemloft.net>
| * sparc64: replace remaining __FUNCTION__ occurancesHarvey Harrison2008-03-032-2/+2
| | | | | | | | | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sparc: replace remaining __FUNCTION__ occurancesHarvey Harrison2008-03-031-3/+3
| | | | | | | | | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC]: Add reboot_command[] extern decl to asm/system.hDavid S. Miller2008-02-282-4/+0
| | | | | | | | | | | | Kill off some sparse warnings. Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC]: Mark linux_sparc_{fpu,chips} static.David S. Miller2008-02-282-4/+4
| | | | | | | | | | | | Caught by sparse. Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud