summaryrefslogtreecommitdiffstats
path: root/arch
Commit message (Collapse)AuthorAgeFilesLines
* Use the APIC to determine the hardware processor id - i386Fernando Luis Vazquez Cao2007-05-091-2/+0
| | | | | | | | | | | | | | | | | | | | | | | hard_smp_processor_id used to be just a macro that hard-coded hard_smp_processor_id to 0 in the non SMP case. When booting non SMP kernels on hardware where the boot ioapic id is not 0 this turns out to be a problem. This is happens frequently in the case of kdump and once in a great while in the case of real hardware. Use the APIC to determine the hardware processor id in both UP and SMP kernels to fix this issue. Notice that hard_smp_processor_id is only used by SMP code or by code that works with apics so we do not need to handle the case when apics are not present and hard_smp_processor_id should never be called there. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Acked-by: Andi Kleen <ak@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Remove hardcoding of hard_smp_processor_id on UP systemsFernando Luis Vazquez Cao2007-05-091-0/+1
| | | | | | | | | | | | | | | | | | | | With the advent of kdump, the assumption that the boot CPU when booting an UP kernel is always the CPU with a particular hardware ID (often 0) (usually referred to as BSP on some architectures) is not valid anymore. The reason being that the dump capture kernel boots on the crashed CPU (the CPU that invoked crash_kexec), which may be or may not be that particular CPU. Move definition of hard_smp_processor_id for the UP case to architecture-specific code ("asm/smp.h") where it belongs, so that each architecture can provide its own implementation. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Acked-by: Andi Kleen <ak@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: turn build warnings into commentsMiklos Szeredi2007-05-093-5/+8
| | | | | | | | | | | | | | | | | These haven't been fixed for ages. Just make comments out of them. arch/um/kernel/skas/process.c:181:2: warning: #warning Need to look up +userspace_pid by cpu arch/um/kernel/skas/process.c:187:2: warning: #warning Need to look up +userspace_pid by cpu arch/um/kernel/skas/process.c:194:2: warning: #warning need to loop over +userspace_pids in kill_off_processes_skas Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: mark a tt-only functionJeff Dike2007-05-091-0/+2
| | | | | | | | | Mark another function as tt-mode only. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uml: turn on SCSI supportPeter Zijlstra2007-05-092-73/+1
| | | | | | | | | | | Enable (i)SCSI on UML, dunno why SCSI was deemed broken, it works like a charm. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* FRV: Replace pgd management via slabs through quicklistsChristoph Lameter2007-05-093-14/+18
| | | | | | | | | | This is done in order to be able to run SLUB which expects no modifications to its page structs. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* FRV: Miscellaneous fixesDavid Howells2007-05-083-2/+13
| | | | | | | | | | | | | | | | | Miscellaneous fixes to bring FRV up to date: (1) Copy the new syscall numbers from i386 to asm-frv/unistd.h and fill out the syscall table in entry.S too. (2) Mark __frv_uart0 and __frv_uart1 __pminitdata rather than __initdata so that determine_clocks() can access them when CONFIG_PM=y. (3) Make arch/frv/mm/elf-fdpic.c include asm/mman.h so that MAP_FIXED is available (fixes commit 2fd3bebaad9da3b3b99c46a3389099424bf7ee35). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2007-05-0816-751/+716
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Optimize fault kprobe handling just like powerpc. [SPARC]: Wire up utimensat syscall. [SPARC64]: Fix request_irq() ignored result warnings in PCI controller code. [SPARC64]: Kill asm-sparc64/pbm.h [ATYFB]: Fix sparc includes. [QLA2XXX]: Fix build on sparc. [SPARC64]: Removal of trivial pci_controller_info uses. [SPARC64]: Move index info pci_pbm_info. [SPARC64]: Move {setup,teardown}_msi_irq into pci_pbm_info. [SPARC64]: Move pci_ops into pci_pbm_info. [SPARC64] SBUS: Error interrupt registry cleanups. [SPARC64] PCI: Use root list of pbm's instead of pci_controller_info's [SPARC64] PCI: Kill PROM_PCIRNG_MAX and PROM_PCIIMAP_MAX. [SPARC64] PCI: Use common routine to fetch PBM properties.
| * [SPARC64]: Optimize fault kprobe handling just like powerpc.David S. Miller2007-05-082-41/+15
| | | | | | | | | | | | And eliminate DIE_GPF while we're at it. Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC]: Wire up utimensat syscall.David S. Miller2007-05-083-1/+6
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: Fix request_irq() ignored result warnings in PCI controller code.David S. Miller2007-05-083-46/+104
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: Kill asm-sparc64/pbm.hDavid S. Miller2007-05-0810-9/+124
| | | | | | | | | | | | Everything it contains can be hidden in pci_impl.h Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: Removal of trivial pci_controller_info uses.David S. Miller2007-05-083-67/+58
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: Move index info pci_pbm_info.David S. Miller2007-05-088-154/+136
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: Move {setup,teardown}_msi_irq into pci_pbm_info.David S. Miller2007-05-082-124/+116
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: Move pci_ops into pci_pbm_info.David S. Miller2007-05-086-7/+6
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64] SBUS: Error interrupt registry cleanups.David S. Miller2007-05-081-6/+6
| | | | | | | | | | | | | | | | | | | | Do not use IRQF_SHARED, these interrupt numbers should all be unique. Also use name strings without spaces in them just like PCI controller drivers do, for consistency. Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64] PCI: Use root list of pbm's instead of pci_controller_info'sDavid S. Miller2007-05-087-310/+184
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The idea is to move more and more things into the pbm, with the eventual goal of eliminating the pci_controller_info entirely as there really isn't any need for it. This stage of the transformations requires some reworking of the PCI error interrupt handling. It might be tricky to get rid of the pci_controller_info parenting for a few reasons: 1) When we get an uncorrectable or correctable error we want to interrogate the IOMMU and streaming cache of both PBMs for error status. These errors come from the UPA front-end which is shared between the two PBM PCI bus segments. Historically speaking this is why I choose the datastructure hierarchy of pci_controller_info-->pci_pbm_info 2) The probing does a portid/devhandle match to look for the 'other' pbm, but this is entirely an artifact and can be eliminated trivially. What we could do to solve #1 is to have a "buddy" pointer from one pbm to another. Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64] PCI: Use common routine to fetch PBM properties.David S. Miller2007-05-087-45/+20
| | | | | | | | | | | | | | | | | | | | Namely bus-range and ino-bitmap. This allows us also to eliminate pci_controller_info's pci_{first,last}_busno fields as only the pbm ones are used now. Signed-off-by: David S. Miller <davem@davemloft.net>
* | Revert "fbdev: ignore VESA modes if framebuffer is disabled"Linus Torvalds2007-05-081-3/+1
|/ | | | | | | | | | | | | | This reverts commit 464bdd33e9baad9806c7adbd8dfc37081a55f27e. Peter Anvin correctly points out that VESA modes have nothing to do with frame buffers per se - they are often just regular extended text modes. Disabling them just because we don't have frame buffer support is very wrong. Cc: H. Peter Anvin <hpa@zytor.com> Cc: Antonino A. Daplas <adaplas@gmail.com>, Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds2007-05-082-108/+71
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (32 commits) Use menuconfig objects - hwmon hwmon/smsc47b397: Use dynamic sysfs callbacks hwmon/smsc47b397: Convert to a platform driver hwmon/w83781d: Deprecate W83627HF support hwmon/w83781d: Use dynamic sysfs callbacks hwmon/w83781d: Be less i2c_client-centric hwmon/w83781d: Clean up conversion macros hwmon/w83781d: No longer use i2c-isa hwmon/ams: Do not print error on systems without apple motion sensor hwmon/ams: Fix I2C read retry logic hwmon: New AD7416, AD7417 and AD7418 driver hwmon/coretemp: Add documentation hwmon: New coretemp driver i386: Use functions from library in msr driver i386: Add safe variants of rdmsr_on_cpu and wrmsr_on_cpu hwmon/lm75: Use dynamic sysfs callbacks hwmon/lm78: Use dynamic sysfs callbacks hwmon/lm78: Be less i2c_client-centric hwmon/lm78: No longer use i2c-isa hwmon: New max6650 driver ...
| * i386: Use functions from library in msr driverNicolas Boichat2007-05-081-102/+4
| | | | | | | | | | | | | | | | | | Use safe MSR functions provided by arch/*/lib/msr-on-cpu.c in arch/i386/kernel/msr.c. Signed-off-by: Nicolas Boichat <nicolas@boichat.ch> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * i386: Add safe variants of rdmsr_on_cpu and wrmsr_on_cpuRudolf Marek2007-05-081-6/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add safe (exception handled) variants of rdmsr_on_cpu and wrmsr_on_cpu. You should use these when the target MSR may not actually exist, as doing so could trigger an exception which the regular functions do not handle. The safe variants are slower, though. The upcoming coretemp hardware monitoring driver will need this. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Cc: Alexey Dobriyan <adobriyan@openvz.org> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | Merge branch 'upstream-linus' of ↵Linus Torvalds2007-05-086-47/+39
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (40 commits) [netdrvr] atl1: fix build pasemi_mac: Use local-mac-address instead of mac-address if available pasemi_mac: PHY support pasemi_mac: Add msglevel support and "debug" module param pasemi_mac: Logic cleanup / rx performance improvements pasemi_mac: Minor cleanup / define fixes pasemi_mac: Add SKB reuse / copy-break pasemi_mac: Timer and interrupt fixes pasemi_mac: Abstract and fix up interrupt restart routines pasemi_mac: Move the IRQ mapping from the PCI layer to the driver tc35815: Remove unnecessary skb->dev assignment drivers/net/dm9000: Convert to generic boolean AT91RM9200 Ethernet: Fix multicast addressing AT91RM9200 Ethernet: Support additional PHYs PCMCIA-NETDEV : xirc2ps_cs: bugfix of multicast code sky2: re-enable 88E8056 for most motherboards MIPS: Drop unnecessary CONFIG_ISA from RBTX49XX ne: MIPS: Use platform_driver for ne on RBTX49XX ne: Add NEEDS_PORTLIST to control ISA auto-probe ne: Misc fixes for platform driver. ... Fix conflict in drivers/net/pasemi_mac.c (get_property() got renamed to of_get_property()) manually. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | pasemi_mac: Move the IRQ mapping from the PCI layer to the driverOlof Johansson2007-05-082-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | Fixes for ethernet IRQ mapping, to be done in the driver instead of in the platform setup code. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | MIPS: Drop unnecessary CONFIG_ISA from RBTX49XXAtsushi Nemoto2007-05-082-33/+0
| | | | | | | | | | | | | | | | | | | | | | | | Those boards do not need CONFIG_ISA if the ne driver could be selectable without it. Disable it and update a defconfig. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | ne: MIPS: Use platform_driver for ne on RBTX49XXAtsushi Nemoto2007-05-082-0/+39
| |/ | | | | | | | | | | | | | | | | | | | | | | This patch lets RBTX49XX boards use generic platform_driver interface for the ne driver. * Use platform_device to pass ioaddr and irq to the ne driver. * Remove unnecessary ifdefs for RBTX49XX from the ne driver. * Make the ne driver selectable on these boards regardless of CONFIG_ISA Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | Merge branch 'master' of ↵Linus Torvalds2007-05-08126-707/+6152
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (77 commits) [POWERPC] Abolish powerpc_flash_init() [POWERPC] Early serial debug support for PPC44x [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc [POWERPC] Add device tree for Ebony [POWERPC] Add powerpc/platforms/44x, disable platforms/4xx for now [POWERPC] MPIC U3/U4 MSI backend [POWERPC] MPIC MSI allocator [POWERPC] Enable MSI mappings for MPIC [POWERPC] Tell Phyp we support MSI [POWERPC] RTAS MSI implementation [POWERPC] PowerPC MSI infrastructure [POWERPC] Rip out the existing powerpc msi stubs [POWERPC] Remove use of 4level-fixup.h for ppc32 [POWERPC] Add powerpc PCI-E reset API implementation [POWERPC] Holly bootwrapper [POWERPC] Holly DTS [POWERPC] Holly defconfig [POWERPC] Add support for 750CL Holly board [POWERPC] Generalize tsi108 PCI setup [POWERPC] Generalize tsi108 PHY types ... Fixed conflict in include/asm-powerpc/kdebug.h manually Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | [POWERPC] Abolish powerpc_flash_init()David Gibson2007-05-082-33/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | powerpc_flash_init() implements a broken way of probing for flash devices supported by the physmap_of driver. It finds all nodes in the device tree with device_type=="rom" and instantiates of_platform devices for them. This is fundamentally incompatible with the normal and correct way of probing for of_platform_bus_probe(). Platforms which relied on powerpc_flash_init()s behaviour (none are in-tree) will have to update their platform probing code to correctly probe busses containing flash devices. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Early serial debug support for PPC44xDavid Gibson2007-05-087-26/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for early serial debugging via the built in port on IBM/AMCC PowerPC 44x CPUs. It uses a bolted TLB entry in address space 1 for the UART's mapping, allowing robust debugging both before and after the initialization of the MMU. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Support for the Ebony 440GP reference board in arch/powerpcDavid Gibson2007-05-0815-11/+1418
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds platform support code for the Ebony (440GP) evaluation board. This includes both code in arch/powerpc/platforms/44x for board initialization, and zImage wrapper code to correctly tweak the flattened device tree based on information from the firmware. The zImage supports both IBM OpenBIOS (aka "treeboot") and old versions of uboot which don't support a flattened device tree. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Add device tree for EbonyDavid Gibson2007-05-081-0/+307
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add a device tree for the Ebony evaluation board (440GP based). This tree is not complete or finalized. This tree needs a version of dtc recent enough to include reference-to-labels to process. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Add powerpc/platforms/44x, disable platforms/4xx for nowDavid Gibson2007-05-085-11/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This prepares for Ebony/440 support by creating an arch/powerpc/platforms/44x directory. It is populated with a single misc_44x.S file, into which is moved the 44x specific reset code from head_44x.S (on the grounds that we should really stop clogging up the head_* files with random asm helper routines). At the same time, we disable the (empty save Kconfig and Makefile) arch/powerpc/platforms/4xx directory from the arch/powerpc/platforms Makefile. Contrary to the comment in arch/powerpc/platforms/4xx/Makefile, attempting to build such an empty Makefile will fail, thus breaking compile for the 44x platforms we're about to add. It can go back in once we start porting some of the 40x platforms (and thus it becomes non-empty). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] MPIC U3/U4 MSI backendMichael Ellerman2007-05-084-6/+205
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MPIC U3/U4 MSI backend. Based on code from Segher, heavily hacked by me. This only deals with MSI on U3/U4 MPICs, aka. CPC 9x5. If we find a U3/U4 then we enable this backend, ie. take over the ppc_md MSI hooks. We might need more elaborate logic in future to decide which backend is enabled. We need our own irq_chip so that we can do MSI masking/unmasking on the device itself. We also need to mask explicitly on shutdown to make sure we don't get bitten by lazy-disable semantics. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] MPIC MSI allocatorMichael Ellerman2007-05-084-1/+217
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To support MSI on MPIC we need a way to reserve and allocate hardware irq numbers, this patch implements an allocator for that purpose. New firmware platforms must define a "msi-available-ranges" property on their MPIC node for MSI to work. For U3/U4 we do a best-guess setup. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Enable MSI mappings for MPICMichael Ellerman2007-05-081-0/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some Apple machines the HT MSI mappings are not enabled by firmware, so we need to do it by hand. We can't use the pci routines as this code runs too early. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Tell Phyp we support MSIMichael Ellerman2007-05-081-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | Tell Phyp we support MSI via the client architecture support mechanism. Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] RTAS MSI implementationMichael Ellerman2007-05-082-0/+271
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement MSI support via RTAS (RTAS = run-time firmware on pSeries machines). For now we assumes that if the required RTAS tokens for MSI are present, then we want to use the RTAS MSI routines. When RTAS is managing MSIs for us, it will/may enable MSI on devices that support it by default. This is contrary to the Linux model where a device is in LSI mode until the driver requests MSIs. To remedy this we add a pci_irq_fixup call, which disables MSI if they've been assigned by firmware and the device also supports LSI. Devices that don't support LSI at all will be left as is, drivers are still expected to call pci_enable_msi() before using the device. At the moment there is no pci_irq_fixup on pSeries, so we can just set it unconditionally. If other platforms use the RTAS MSI backend they'll need to check that still holds. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] PowerPC MSI infrastructureMichael Ellerman2007-05-083-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This provides the architecture specific hooks to support MSI on powerpc. We implement the newly added arch_setup_msi_irqs() and arch_teardown_msi_irqs(), and then delegate to ppc_md routines. Platforms that don't implement MSI will leave the ppc_md calls blank, arch_msi_check_device() will detect this and return ENOSYS. Drivers should detect this error and continue to use LSI. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Rip out the existing powerpc msi stubsMichael Ellerman2007-05-081-27/+0
| | | | | | | | | | | | | | | | | | | | | | | | Rip out the existing powerpc msi stubs. These were the start of an implementation based on ppc_md calls, but were never used in mainline. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Remove use of 4level-fixup.h for ppc32David Gibson2007-05-082-13/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For 32-bit systems, powerpc still relies on the 4level-fixup.h hack, to pretend that the generic pagetable handling stuff is 3-levels rather than 4. This patch removes this, instead using the newer pgtable-nopmd.h to handle the elision of both the pud and pmd pagetable levels (ppc32 pagetables are actually 2 levels). This removes a little extraneous code, and makes it more easily compared to the 64-bit pagetable code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Add powerpc PCI-E reset API implementationBrian King2007-05-081-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds the pSeries platform implementation for a new PCI API which can be used to issue various types of PCI-E reset, including PCI-E warm reset and PCI-E hot reset. This is needed for an ipr PCI-E adapter which does not properly implement BIST. Running BIST on this adapter results in PCI-E errors. The only reliable reset mechanism that exists on this hardware is PCI Fundamental reset (warm reset). Acked-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | Merge branch 'linux-2.6'Paul Mackerras2007-05-08739-16359/+49128
| |\ \ | | |/
| * | [POWERPC] Holly bootwrapperJosh Boyer2007-05-082-1/+46
| | | | | | | | | | | | | | | | | | | | | | | | Add Holly/Hickory bootwrapper Signed-off-by: Stephen Winiecki <stevewin@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Holly DTSJosh Boyer2007-05-081-0/+198
| | | | | | | | | | | | | | | | | | | | | | | | Add Holly DTS file Signed-off-by: Stephen Winiecki <stevewin@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Holly defconfigJosh Boyer2007-05-081-0/+1070
| | | | | | | | | | | | | | | | | | | | | | | | Holly/Hickory defconfig Signed-off-by: Stephen Winiecki <stevewin@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Add support for 750CL Holly boardJosh Boyer2007-05-084-4/+330
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add PowerPC 750 Holly/Hickory platform support Signed-off-by: Stephen Winiecki <stevewin@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Generalize tsi108 PCI setupJosh Boyer2007-05-082-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | Generalize tsi108_setup_pci to take the config space physical address and primary bus designator as a parameter. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Generalize tsi108 PHY typesJosh Boyer2007-05-081-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a phy_type field to the tsi108 ethernet structures to indicate which PHY is used on a board. This is derived from the "compatible" property in the ethernet-phy node of the device tree. The default remains the MV88E PHY. Also, convert the setup code to use of_get_mac_address instead of hard coding a lookup for the "address" property in the ethernet node. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Add tsi108_pci.h for common PCI functionsJosh Boyer2007-05-082-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | Add a header file for the common PCI routines used for the TSI bridge Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
OpenPOWER on IntegriCloud