summaryrefslogtreecommitdiffstats
path: root/arch/xtensa/boot
Commit message (Collapse)AuthorAgeFilesLines
* xtensa: rename BUILTIN_DTB to BUILTIN_DTB_SOURCECorentin Labbe2019-01-261-3/+3
| | | | | | | | | | | | | | When building some xtensa config, I hit the following warning: drivers/staging/mt7621-dts/Kconfig:4:warning: 'BUILTIN_DTB' has wrong type. 'select' only accept arguments of bool and tristate type It is due to some arch use BUILTIN_DTB as a flag for the need to builtin dtb but xtensa use it as a string for which dtb to bulltin. But for this (which dtb to build), it is better to use BUILTIN_DTB_SOURCE like other arch do. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: don't use l32r opcode directlyMax Filippov2018-12-051-15/+14
| | | | | | | | | xtensa assembler is capable of representing register loads with either movi + addmi, l32r or const16, depending on the core configuration. Don't use '.literal' and 'l32r' directly in the code, use 'movi' and let the assembler relax them. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: xtfpga.dtsi: fix dtc warnings about SPIMax Filippov2018-12-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename SPI controller node in the XTFPGA DTS to spi@... This fixes the following build warnings: arch/xtensa/boot/dts/kc705_nommu.dtb: Warning (spi_bus_bridge): /soc/spi-master@0d0a0000: node name for SPI buses should be 'spi' arch/xtensa/boot/dts/kc705_nommu.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/xtensa/boot/dts/lx200mx.dtb: Warning (spi_bus_bridge): /soc/spi-master@0d0a0000: node name for SPI buses should be 'spi' arch/xtensa/boot/dts/lx200mx.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/xtensa/boot/dts/kc705.dtb: Warning (spi_bus_bridge): /soc/spi-master@0d0a0000: node name for SPI buses should be 'spi' arch/xtensa/boot/dts/kc705.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/xtensa/boot/dts/ml605.dtb: Warning (spi_bus_bridge): /soc/spi-master@0d0a0000: node name for SPI buses should be 'spi' arch/xtensa/boot/dts/ml605.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' arch/xtensa/boot/dts/lx60.dtb: Warning (spi_bus_bridge): /soc/spi-master@0d0a0000: node name for SPI buses should be 'spi' arch/xtensa/boot/dts/lx60.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: add NOTES section to the linker scriptMax Filippov2018-10-291-1/+1
| | | | | | | | | | This section collects all source .note.* sections together in the vmlinux image. Without it .note.Linux section may be placed at address 0, while the rest of the kernel is at its normal address, resulting in a huge vmlinux.bin image that may not be linked into the xtensa Image.elf. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* Merge tag 'kbuild-v4.19-2' of ↵Linus Torvalds2018-08-251-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - add build_{menu,n,g,x}config targets for compile-testing Kconfig - fix and improve recursive dependency detection in Kconfig - fix parallel building of menuconfig/nconfig - fix syntax error in clang-version.sh - suppress distracting log from syncconfig - remove obsolete "rpm" target - remove VMLINUX_SYMBOL(_STR) macro entirely - fix microblaze build with CONFIG_DYNAMIC_FTRACE - move compiler test for dead code/data elimination to Kconfig - rename well-known LDFLAGS variable to KBUILD_LDFLAGS - misc fixes and cleanups * tag 'kbuild-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: rename LDFLAGS to KBUILD_LDFLAGS kbuild: pass LDFLAGS to recordmcount.pl kbuild: test dead code/data elimination support in Kconfig initramfs: move gen_initramfs_list.sh from scripts/ to usr/ vmlinux.lds.h: remove stale <linux/export.h> include export.h: remove VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR() Coccinelle: remove pci_alloc_consistent semantic to detect in zalloc-simple.cocci kbuild: make sorting initramfs contents independent of locale kbuild: remove "rpm" target, which is alias of "rpm-pkg" kbuild: Fix LOADLIBES rename in Documentation/kbuild/makefiles.txt kconfig: suppress "configuration written to .config" for syncconfig kconfig: fix "Can't open ..." in parallel build kbuild: Add a space after `!` to prevent parsing as file pattern scripts: modpost: check memory allocation results kconfig: improve the recursive dependency report kconfig: report recursive dependency involving 'imply' kconfig: error out when seeing recursive dependency kconfig: add build-only configurator targets scripts/dtc: consolidate include path options in Makefile
| * kbuild: rename LDFLAGS to KBUILD_LDFLAGSMasahiro Yamada2018-08-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit a0f97e06a43c ("kbuild: enable 'make CFLAGS=...' to add additional options to CC") renamed CFLAGS to KBUILD_CFLAGS. Commit 222d394d30e7 ("kbuild: enable 'make AFLAGS=...' to add additional options to AS") renamed AFLAGS to KBUILD_AFLAGS. Commit 06c5040cdb13 ("kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS. For some reason, LDFLAGS was not renamed. Using a well-known variable like LDFLAGS may result in accidental override of the variable. Kbuild generally uses KBUILD_ prefixed variables for the internally appended options, so here is one more conversion to sanitize the naming convention. I did not touch Makefiles under tools/ since the tools build system is a different world. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
* | Merge tag 'xtensa-20180820' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds2018-08-221-10/+9
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull Xtensa updates from Max Filippov: - switch xtensa arch to the generic noncoherent direct mapping operations - add support for DMA_ATTR_NO_KERNEL_MAPPING attribute - clean up users of platform/hardware.h in generic Xtensa code - fix assembly cache maintenance code for long cache lines - rework noMMU cache attributes initialization - add big-endian HiFi2 test_kc705_be CPU variant * tag 'xtensa-20180820' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: add test_kc705_be variant xtensa: clean up boot-elf/bootstrap.S xtensa: make bootparam parsing optional xtensa: drop variant IRQ support xtensa: drop unneeded platform/hardware.h headers xtensa: move PLATFORM_NR_IRQS to Kconfig xtensa: rework {CONFIG,PLATFORM}_DEFAULT_MEM_START xtensa: drop unused {CONFIG,PLATFORM}_DEFAULT_MEM_SIZE xtensa: rework noMMU cache attributes initialization xtensa: increase ranges in ___invalidate_{i,d}cache_all xtensa: limit offsets in __loop_cache_{all,page} xtensa: platform-specific handling of coherent memory xtensa: support DMA_ATTR_NO_KERNEL_MAPPING attribute xtensa: use generic dma_noncoherent_ops
| * xtensa: clean up boot-elf/bootstrap.SMax Filippov2018-08-201-11/+6
| | | | | | | | | | | | Drop unneeded headers, rewrite literal definitions with .literal. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
| * xtensa: make bootparam parsing optionalMax Filippov2018-08-201-1/+5
| | | | | | | | | | | | | | A kernel may not need any boot parameters from the bootloader, allow disabling bootparam parsing in that case. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* | kbuild: remove deprecated host-progs variableMasahiro Yamada2018-08-091-2/+1
|/ | | | | | | | | | | The host-progs has been kept as an alias of hostprogs-y for a long time (at least since the beginning of Git era), with the clear prompt: Usage of host-progs is deprecated. Please replace with hostprogs-y! Enough time for the migration has passed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com>
* Merge tag 'xtensa-20180129' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds2018-01-292-0/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull Xtensa updates from Max Filippov: - add SSP support - add KASAN support - improvements to xtensa-specific assembly: - use ENTRY and ENDPROC consistently - clean up and unify word alignment macros - clean up and unify fixup marking - use 'call' instead of 'callx' where possible - various cleanups: - consiolidate kernel stack size related definitions - replace #ifdef'fed/commented out debug printk statements with pr_debug - use struct exc_table instead of flat array for exception handling data - build kernel with -mtext-section-literals; simplify xtensa linker script - fix futex_atomic_cmpxchg_inatomic() * tag 'xtensa-20180129' of git://github.com/jcmvbkbc/linux-xtensa: (21 commits) xtensa: fix futex_atomic_cmpxchg_inatomic xtensa: shut up gcc-8 warnings xtensa: print kernel sections info in mem_init xtensa: use generic strncpy_from_user with KASAN xtensa: use __memset in __xtensa_clear_user xtensa: add support for KASAN xtensa: move fixmap and kmap just above the KSEG xtensa: don't clear swapper_pg_dir in paging_init xtensa: extract init_kio xtensa: implement early_trap_init xtensa: clean up exception handling structure xtensa: clean up custom-controlled debug output xtensa: enable stack protector xtensa: print hardware config ID on startup xtensa: consolidate kernel stack size related definitions xtensa: clean up functions in assembly code xtensa: clean up word alignment macros in assembly code xtensa: clean up fixups in assembly code xtensa: use call instead of callx in assembly code xtensa: build kernel with text-section-literals ...
| * xtensa: add support for KASANMax Filippov2017-12-161-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cover kernel addresses above 0x90000000 by the shadow map. Enable HAVE_ARCH_KASAN when MMU is enabled. Provide kasan_early_init that fills shadow map with writable copies of kasan_zero_page. Call kasan_early_init right after mmu initialization in the setup_arch. Provide kasan_init that allocates proper shadow map pages from the memblock and puts these pages into the shadow map for addresses from VMALLOC area to the end of KSEG. Call kasan_init right after memblock initialization. Don't use KASAN for the boot code, MMU and KASAN initialization and page fault handler. Make kernel stack size 4 times larger when KASAN is enabled to avoid stack overflows. GCC 7.3, 8 or newer is required to build the xtensa kernel with KASAN. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
| * xtensa: enable stack protectorMax Filippov2017-12-161-0/+4
| | | | | | | | | | | | | | The implementation is adopted from the ARM arch. GCC 7.3, 8 or newer is required for building the xtensa kernel with SSP. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
| * xtensa: build kernel with text-section-literalsMax Filippov2017-12-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | vmlinux.lds.S doesn't do anything special with literals, so instead of keeping them separate put them into the corresponding text sections. Drop explicit .literal sections from the vmlinux.lds.S, use standard section macros. Mark literal pool locations in the assembly sources. Unfortunately assembler doesn't put literals into .init sections and external libgcc may still have .literal sections, so sed transformation to the linker script is still needed. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* | Merge tag 'devicetree-for-4.15' of ↵Linus Torvalds2017-11-142-7/+3
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...
| * kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.libMasahiro Yamada2017-11-091-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_OF_ALL_DTBS is enabled, "make ARCH=arm64 dtbs" compiles each DTB twice; one from arch/arm64/boot/dts/*/Makefile and the other from the dtb-$(CONFIG_OF_ALL_DTBS) line in arch/arm64/boot/dts/Makefile. It could be a race problem when building DTBS in parallel. Another minor issue is CONFIG_OF_ALL_DTBS covers only *.dts in vendor sub-directories, so this broke when Broadcom added one more hierarchy in arch/arm64/boot/dts/broadcom/<soc>/. One idea to fix the issues in a clean way is to move DTB handling to Kbuild core scripts. Makefile.dtbinst already recognizes dtb-y natively, so it should not hurt to do so. Add $(dtb-y) to extra-y, and $(dtb-) as well if CONFIG_OF_ALL_DTBS is enabled. All clutter things in Makefiles go away. As a bonus clean-up, I also removed dts-dirs. Just use subdir-y directly to traverse sub-directories. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> [robh: corrected BUILTIN_DTB to CONFIG_BUILTIN_DTB] Signed-off-by: Rob Herring <robh@kernel.org>
| * kbuild: clean up *.dtb and *.dtb.S patterns from top-level MakefileMasahiro Yamada2017-11-081-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | We need to add "clean-files" in Makfiles to clean up DT blobs, but we often miss to do so. Since there are no source files that end with .dtb or .dtb.S, so we can clean-up those files from the top-level Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <robh@kernel.org>
| * .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignoreMasahiro Yamada2017-11-081-1/+0
| | | | | | | | | | | | | | | | | | | | Most of DT files are compiled under arch/*/boot/dts/, but we have some other directories, like drivers/of/unittest-data/. We often miss to add gitignore patterns per directory. Since there are no source files that end with .dtb or .dtb.S, we can ignore the patterns globally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rob Herring <robh@kernel.org>
* | License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-0213-0/+13
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'xtensa-20170303' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds2017-03-034-23/+18
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull Xtensa updates from Max Filippov: - clean up bootable image build targets: provide separate 'Image', 'zImage' and 'uImage' make targets that only build corresponding image type. Make 'all' build all images appropriate for a platform - allow merging vectors code into .text section as a preparation step for XIP support - fix handling external FDT when the kernel is built without BLK_DEV_INITRD support * tag 'xtensa-20170303' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: allow merging vectors into .text section xtensa: clean up bootable image build targets xtensa: move parse_tag_fdt out of #ifdef CONFIG_BLK_DEV_INITRD
| * xtensa: clean up bootable image build targetsMax Filippov2017-03-014-23/+18
| | | | | | | | | | | | | | | | | | | | | | Currently xtensa uses 'zImage' as a synonym of 'all', but in fact xtensa supports three targets: 'Image' (ELF image with reset vector), 'zImage' (compressed redboot image) and 'uImage' (U-Boot image). Provide separate 'Image', 'zImage' and 'uImage' make targets that only build corresponding image type. Make 'all' build all images appropriate for a platform. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* | xtensa: configure shared DMA pool reservation in kc705 DTSMax Filippov2016-12-151-0/+16
|/ | | | | | | Add example 64MByte long reservation in the first 512MBytes of physical memory used as shared DMA pool. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: rearrange CCOUNT calibrationMax Filippov2016-09-201-3/+1
| | | | | | | | | | | | | | | DT-enabled kernel should have a CPU node connected to a clock. This clock is the CCOUNT clock. Use old platform_calibrate_ccount call as a fallback when CPU node cannot be found or has no clock and in non-DT-enabled configurations. Drop no longer needed code that updates CPU clock-frequency property in the DT; drop DT-related code from the platform_calibrate_ccount too. Move of_clk_init to the top of time_init, so that clocks are initialized before CCOUNT calibration is attempted. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: xtfpga: use clock provider, don't update DTMax Filippov2016-09-201-5/+6
| | | | | | | | | | | Instead of querying hardcoded FPGA frequency register and then updating clock-frequency property in specificly named DT nodes in machine setup code register a clock provider that returns fixed-rate clock, configured by register specified in DT. This way we have less magic/hardcoded names and use more existing common clock framework code. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net>
* xtensa: Tweak xuartps UART driver Rx watermark for Cadence CSP config.Scott Telford2016-09-191-1/+1
| | | | | | | | | Add module parameter xilinx_uartps.rx_trigger_level=32 to command line options for CSP to set Rx watermark for xuartps driver lower than the default value, to avoid UART overruns at 115200 bps. Signed-off-by: Scott Telford <stelford@cadence.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: Added Cadence CSP kernel configuration for XtensaScott Telford2016-09-091-0/+54
| | | | | | | | Added defconfig, device tree and Xtensa variant header files for the Cadence Configurable System Platform "xt_lnx" processor configuration. Signed-off-by: Scott Telford <stelford@cadence.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: cleanup MMU setup and kernel layout macrosMax Filippov2016-07-243-11/+8
| | | | | | | | | | | | | | | | Make kernel load address explicit, independent of the selected MMU configuration and configurable from Kconfig. Do not restrict it to the first 512MB of the physical address space. Cleanup kernel memory layout macros: - rename VECBASE_RESET_VADDR to VECBASE_VADDR, XC_VADDR to VECTOR_VADDR; - drop VIRTUAL_MEMORY_ADDRESS and LOAD_MEMORY_ADDRESS; - introduce PHYS_OFFSET and use it in __va and __pa definitions; - synchronize MMU/noMMU vectors, drop unused NMI vector; - replace hardcoded vectors offset of 0x3000 with Kconfig symbol. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: xtfpga: fix earlycon endiannessMax Filippov2016-03-112-2/+2
| | | | | | | | | Serial port is attached to XTFPGA boards as native endian device, now that earlycon parameter parser understands mmio32native put it into earlycon kernel parameter. This makes early console functional on both little- and big-endian CPUs with identical kernel command lines. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: xtfpga: fix i2c controller register width and endiannessMax Filippov2016-03-111-1/+2
| | | | | | | | | I2C controller is attached to XTFPGA boards as native endian device, mark it as such in DTS. Set register width in DTS to 4, this way it works both for little- and big-endian CPUs. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: xtfpga: fix ethernet controller endiannessMax Filippov2016-03-111-0/+1
| | | | | | | | Ethernet controller is attached to XTFPGA boards as native endian device, mark it as such in DTS and pass correct endianness in platform data. This makes network functional on big-endian CPUs. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: xtfpga: fix serial port register width and endiannessMax Filippov2016-03-111-0/+2
| | | | | | | | | Serial port is attached to XTFPGA boards as native endian device, mark it as such in DTS and pass correct endianness in platform data. Set register width in DTS to 4, this way it matches the platform data and works correctly on big-endian CPUs. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* Merge tag 'xtensa-20151108' of git://github.com/czankel/xtensa-linuxLinus Torvalds2015-11-093-41/+17
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull xtensa updates from Chris Zankel: - fix remaining issues with noMMU cores - fix build for cores w/o cache or zero overhead loop options - fix boot of secondary cores in SMP configuration - add support for DMA to high memory pages - add dma_to_phys and phys_to_dma functions. * tag 'xtensa-20151108' of git://github.com/czankel/xtensa-linux: xtensa: implement dma_to_phys and phys_to_dma xtensa: support DMA to high memory Revert "xtensa: cache inquiry and unaligned cache handling functions" xtensa: drop unused sections and remapped reset handlers xtensa: fix secondary core boot in SMP xtensa: add FORCE_MAX_ZONEORDER to Kconfig xtensa: nommu: provide defconfig for de212 on kc705 xtensa: nommu: xtfpga: add kc705 DTS xtensa: add de212 core variant xtensa: nommu: select HAVE_FUTEX_CMPXCHG xtensa: nommu: fix default memory start address xtensa: nommu: provide correct KIO addresses xtensa: nommu: fix USER_RING definition xtensa: xtfpga: fix integer overflow in TASK_SIZE xtensa: fix build for configs without cache options xtensa: fixes for configs without loop option
| * xtensa: drop unused sections and remapped reset handlersMax Filippov2015-11-032-41/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | There are no .bootstrap or .ResetVector.text sections linked to the vmlinux image, drop these sections from vmlinux.ld.S. Drop RESET_VECTOR_VADDR definition only used for .ResetVector.text. Drop remapped copies of primary and secondary reset vectors, as modern gdb don't have problems stepping through instructions at arbitrary locations. Drop corresponding sections from the corresponding linker scripts. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
| * xtensa: nommu: xtfpga: add kc705 DTSMax Filippov2015-11-021-0/+17
| | | | | | | | Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* | xtensa: enable building of all dtbsRob Herring2015-10-271-1/+6
|/ | | | | | | | | | | | Enable building all dtb files when CONFIG_OF_ALL_DTBS is enabled. The dtbs are not really dependent on a platform being enabled or any other kernel config, so for testing coverage it is convenient to build all of the dtbs. This builds all dts files in the tree, not just targets listed. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-xtensa@linux-xtensa.org
* xtensa: xtfpga: add audio card to xtfpga DTSMax Filippov2015-02-071-0/+64
| | | | | | | | This includes OpenCores I2C host controller, TI CDCE706 clock generator, xtfpga I2S master controller, xtfpga SPI master controller, TI TLV320AIC23 audio codec and a simple audio card. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: nommu: fix uImage load addressMax Filippov2014-10-211-0/+4
| | | | | | | Use the same offset from the default physical memory start address as in LOAD_MEMORY_ADDRESS definition. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: nommu: fix Image.elf reset code and ld scriptMax Filippov2014-10-212-6/+6
| | | | | | | | Don't hardcode kernel entry address as 0x3000 or 0xd0003000, use LOAD_MEMORY_ADDRESS macro. Don't compile MMU remapping code and don't try to link it when building noMMU configuration. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: xtfpga: add lx200 SMP DTS and defconfigMax Filippov2014-10-211-0/+16
| | | | | | | This config allows running SMP-enabled bitstream on LX200 board. NFS or FLASH rootfs, minimal debug, up to 4 cores. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: configure kc705 for highmemMax Filippov2014-08-141-1/+4
| | | | | | | | Enable all memory available on KC705 (1G - 128M) by default. Update memory node in DTS and also limit usable memory in bootargs in case memmap is passed from the bootloader. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: add support for KC705Max Filippov2014-04-062-0/+39
| | | | Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: xtfpga: introduce SoC I/O busMax Filippov2014-04-063-53/+64
| | | | Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: xtfpga: set ethoc clock frequencyMax Filippov2014-02-211-0/+1
| | | | | | | Connect xtfpga board ethernet MAC to the clock in the DTS. Set up MAC base frequency in the platform data in case of build w/o CONFIG_OF. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: xtfpga: use common clock frameworkMax Filippov2014-02-211-3/+8
| | | | | | | With this change the board needs to set up single clock object, users of this clock will get correct frequency automatically. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: standardize devicetree cpu compatible stringsBaruch Siach2014-01-153-4/+4
| | | | | | | | | | | The recommended compatible string format, according to the ePAPR v1.1 standard, is "manufacturer,model". Change the xtensa cpu compatible strings to "cdns,xtensa-cpu". Also, change the boards compatible strings in a similar way. The pic compatible string will be dealt with in a separate patch. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* xtensa: move built-in PIC to drivers/irqchipMax Filippov2014-01-141-1/+1
| | | | | | | | | Extract xtensa built-in interrupt controller implementation from xtensa/kernel/irq.c and move it to other irqchips, providing way to instantiate it from the device tree. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
* xtensa: don't use echo -e needlesslyMax Filippov2013-09-061-1/+1
| | | | | | | | | | -e is not needed to output strings without escape sequences. This breaks big endian FSF build when the shell is dash, because its builtin echo doesn't understand '-e' switch and outputs it in the echoed string. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
* xtensa: add static function tracer supportMax Filippov2013-07-081-0/+7
| | | | | Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
* xtensa: tell git to ignore generated .dtb filesBaruch Siach2013-07-081-0/+1
| | | | | | Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
* xtensa: tell git to ignore copied zlib source filesBaruch Siach2013-07-081-0/+3
| | | | | Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Chris Zankel <chris@zankel.net>
OpenPOWER on IntegriCloud