summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel
Commit message (Collapse)AuthorAgeFilesLines
* kprobes/x86: Fix kernel panic when certain exception-handling addresses are ↵Masami Hiramatsu2017-05-143-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | probed commit 75013fb16f8484898eaa8d0b08fed942d790f029 upstream. Fix to the exception table entry check by using probed address instead of the address of copied instruction. This bug may cause unexpected kernel panic if user probe an address where an exception can happen which should be fixup by __ex_table (e.g. copy_from_user.) Unless user puts a kprobe on such address, this doesn't cause any problem. This bug has been introduced years ago, by commit: 464846888d9a ("x86/kprobes: Fix a bug which can modify kernel code permanently"). Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 464846888d9a ("x86/kprobes: Fix a bug which can modify kernel code permanently") Link: http://lkml.kernel.org/r/148829899399.28855.12581062400757221722.stgit@devbox Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/pci-calgary: Fix iommu_free() comparison of unsigned expression >= 0Nikola Pajkovsky2017-05-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 68dee8e2f2cacc54d038394e70d22411dee89da2 upstream. commit 8fd524b355da ("x86: Kill bad_dma_address variable") has killed bad_dma_address variable and used instead of macro DMA_ERROR_CODE which is always zero. Since dma_addr is unsigned, the statement dma_addr >= DMA_ERROR_CODE is always true, and not needed. arch/x86/kernel/pci-calgary_64.c: In function ‘iommu_free’: arch/x86/kernel/pci-calgary_64.c:299:2: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] if (unlikely((dma_addr >= DMA_ERROR_CODE) && (dma_addr < badend))) { Fixes: 8fd524b355da ("x86: Kill bad_dma_address variable") Signed-off-by: Nikola Pajkovsky <npajkovsky@suse.cz> Cc: iommu@lists.linux-foundation.org Cc: Jon Mason <jdmason@kudzu.us> Cc: Muli Ben-Yehuda <mulix@mulix.org> Link: http://lkml.kernel.org/r/7612c0f9dd7c1290407dbf8e809def922006920b.1479161177.git.npajkovsky@suse.cz Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/ioapic: Restore IO-APIC irq_chip retrigger callbackRuslan Ruslichenko2017-05-141-0/+2
| | | | | | | | | | | | | | | | | | | | commit a9b4f08770b415f30f2fb0f8329a370c8f554aa3 upstream. commit d32932d02e18 removed the irq_retrigger callback from the IO-APIC chip and did not add it to the new IO-APIC-IR irq chip. There is no harm because the interrupts are resent in software when the retrigger callback is NULL, but it's less efficient. So restore them. [ tglx: Massaged changelog ] Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") Signed-off-by: Ruslan Ruslichenko <rruslich@cisco.com> Cc: xe-linux-external@cisco.com Link: http://lkml.kernel.org/r/1484662432-13580-1-git-send-email-rruslich@cisco.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ftrace/x86: Fix triple fault with graph tracing and suspend-to-ramJosh Poimboeuf2017-05-031-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 34a477e5297cbaa6ecc6e17c042a866e1cbe80d6 upstream. On x86-32, with CONFIG_FIRMWARE and multiple CPUs, if you enable function graph tracing and then suspend to RAM, it will triple fault and reboot when it resumes. The first fault happens when booting a secondary CPU: startup_32_smp() load_ucode_ap() prepare_ftrace_return() ftrace_graph_is_dead() (accesses 'kill_ftrace_graph') The early head_32.S code calls into load_ucode_ap(), which has an an ftrace hook, so it calls prepare_ftrace_return(), which calls ftrace_graph_is_dead(), which tries to access the global 'kill_ftrace_graph' variable with a virtual address, causing a fault because the CPU is still in real mode. The fix is to add a check in prepare_ftrace_return() to make sure it's running in protected mode before continuing. The check makes sure the stack pointer is a virtual kernel address. It's a bit of a hack, but it's not very intrusive and it works well enough. For reference, here are a few other (more difficult) ways this could have potentially been fixed: - Move startup_32_smp()'s call to load_ucode_ap() down to *after* paging is enabled. (No idea what that would break.) - Track down load_ucode_ap()'s entire callee tree and mark all the functions 'notrace'. (Probably not realistic.) - Pause graph tracing in ftrace_suspend_notifier_call() or bringup_cpu() or __cpu_up(), and ensure that the pause facility can be queried from real mode. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: "Rafael J . Wysocki" <rjw@rjwysocki.net> Cc: linux-acpi@vger.kernel.org Cc: Borislav Petkov <bp@alien8.de> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/5c1272269a580660703ed2eccf44308e790c7a98.1492123841.git.jpoimboe@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/mce/AMD: Give a name to MCA bank 3 when accessed with legacy MSRsYazen Ghannam2017-04-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 29f72ce3e4d18066ec75c79c857bee0618a3504b upstream. MCA bank 3 is reserved on systems pre-Fam17h, so it didn't have a name. However, MCA bank 3 is defined on Fam17h systems and can be accessed using legacy MSRs. Without a name we get a stack trace on Fam17h systems when trying to register sysfs files for bank 3 on kernels that don't recognize Scalable MCA. Call MCA bank 3 "decode_unit" since this is what it represents on Fam17h. This will allow kernels without SMCA support to see this bank on Fam17h+ and prevent the stack trace. This will not affect older systems since this bank is reserved on them, i.e. it'll be ignored. Tested on AMD Fam15h and Fam17h systems. WARNING: CPU: 26 PID: 1 at lib/kobject.c:210 kobject_add_internal kobject: (ffff88085bb256c0): attempted to be registered with empty name! ... Call Trace: kobject_add_internal kobject_add kobject_create_and_add threshold_create_device threshold_init_device Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1490102285-3659-1-git-send-email-Yazen.Ghannam@amd.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/mce: Make the MCE notifier a blocking oneVishal Verma2017-04-273-16/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 0dc9c639e6553e39c13b2c0d54c8a1b098cb95e2 upstream. The NFIT MCE handler callback (for handling media errors on NVDIMMs) takes a mutex to add the location of a memory error to a list. But since the notifier call chain for machine checks (x86_mce_decoder_chain) is atomic, we get a lockdep splat like: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 in_atomic(): 1, irqs_disabled(): 0, pid: 4, name: kworker/0:0 [..] Call Trace: dump_stack ___might_sleep __might_sleep mutex_lock_nested ? __lock_acquire nfit_handle_mce notifier_call_chain atomic_notifier_call_chain ? atomic_notifier_call_chain mce_gen_pool_process Convert the notifier to a blocking one which gets to run only in process context. Boris: remove the notifier call in atomic context in print_mce(). For now, let's print the MCE on the atomic path so that we can make sure they go out and get logged at least. Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error") Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Acked-by: Tony Luck <tony.luck@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: x86-ml <x86@kernel.org> Link: http://lkml.kernel.org/r/20170411224457.24777-1-vishal.l.verma@intel.com Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/intel_rdt: Fix locking in rdtgroup_schemata_write()Jiri Olsa2017-04-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | commit 7f00f388712b29005782bad7e4b25942620f3b9c upstream. The schemata lock is released before freeing the resource's temporary tmp_cbms allocation. That's racy versus another write which allocates and uses new temporary storage, resulting in memory leaks, freeing in use memory, double a free or any combination of those. Move the unlock after the release code. Fixes: 60ec2440c63d ("x86/intel_rdt: Add schemata file") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20170411071446.15241-1-jolsa@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/signals: Fix lower/upper bound reporting in compat siginfoJoerg Roedel2017-04-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit cfac6dfa42bddfa9711b20d486e521d1a41ab09f upstream. Put the right values from the original siginfo into the userspace compat-siginfo. This fixes the 32-bit MPX "tabletest" testcase on 64-bit kernels. Signed-off-by: Joerg Roedel <jroedel@suse.de> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: a4455082dc6f0 ('x86/signals: Add missing signal_compat code for x86 features') Link: http://lkml.kernel.org/r/1491322501-5054-1-git-send-email-joro@8bytes.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/reboot/quirks: Fix typo in ASUS EeeBook X205TA reboot quirkMatjaz Hegedic2017-04-121-1/+1
| | | | | | | | | | | | | | | | | | [ Upstream commit bba8376aea1dcbbe22bbda118c52abee317c7609 ] The reboot quirk for ASUS EeeBook X205TA contains a typo in DMI_PRODUCT_NAME, improperly referring to X205TAW instead of X205TA, which prevents the quirk from being triggered. The model X205TAW already has a reboot quirk of its own. This fix simply removes the inappropriate final letter W. Fixes: 90b28ded88dd ("x86/reboot/quirks: Add ASUS EeeBook X205TA reboot quirk") Signed-off-by: Matjaz Hegedic <matjaz.hegedic@gmail.com> Link: http://lkml.kernel.org/r/1489064417-7445-1-git-send-email-matjaz.hegedic@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/reboot/quirks: Add ASUS EeeBook X205TA/W reboot quirkMatjaz Hegedic2017-04-121-0/+8
| | | | | | | | | | | | | | [ Upstream commit 3b3e78552d3077ec70d2640e629e07e3ab416a6a ] Without the parameter reboot=a, ASUS EeeBook X205TA/W will hang when it should reboot. This adds the appropriate quirk, thus fixing the problem. Signed-off-by: Matjaz Hegedic <matjaz.hegedic@gmail.com> Link: http://lkml.kernel.org/r/1488737804-20681-1-git-send-email-matjaz.hegedic@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/reboot/quirks: Add ASUS EeeBook X205TA reboot quirkMatjaz Hegedic2017-04-121-0/+8
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 90b28ded88dda8bea82b4a86923e73ba0746d884 ] Without the parameter reboot=a, ASUS EeeBook X205TA will hang when it should reboot. This adds the appropriate quirk, thus fixing the problem. Signed-off-by: Matjaz Hegedic <matjaz.hegedic@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/mce: Don't print MCEs when mcelog is activeAndi Kleen2017-04-121-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | commit cc66afea58f858ff6da7f79b8a595a67bbb4f9a9 upstream. Since: cd9c57cad3fe ("x86/MCE: Dump MCE to dmesg if no consumers") all MCEs are printed even when mcelog is running. Fix the regression to not print to dmesg when mcelog is running as it is a consumer too. Signed-off-by: Andi Kleen <ak@linux.intel.com> [ Massage commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Fixes: cd9c57cad3fe ("x86/MCE: Dump MCE to dmesg if no consumers") Link: http://lkml.kernel.org/r/20170327093304.10683-2-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/intel_rdt: Put group node in rdtgroup_kn_unlockJiri Olsa2017-03-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 49ec8f5b6ae3ab60385492cad900ffc8a523c895 upstream. The rdtgroup_kn_unlock waits for the last user to release and put its node. But it's calling kernfs_put on the node which calls the rdtgroup_kn_unlock, which might not be the group's directory node, but another group's file node. This race could be easily reproduced by running 2 instances of following script: mount -t resctrl resctrl /sys/fs/resctrl/ pushd /sys/fs/resctrl/ mkdir krava echo "krava" > krava/schemata rmdir krava popd umount /sys/fs/resctrl It triggers the slub debug error message with following command line config: slub_debug=,kernfs_node_cache. Call kernfs_put on the group's node to fix it. Fixes: 60cf5e101fd4 ("x86/intel_rdt: Add mkdir to resctrl file system") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/1489501253-20248-1-git-send-email-jolsa@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/kasan: Fix boot with KASAN=y and PROFILE_ANNOTATED_BRANCHES=yAndrey Ryabinin2017-03-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | commit be3606ff739d1c1be36389f8737c577ad87e1f57 upstream. The kernel doesn't boot with both PROFILE_ANNOTATED_BRANCHES=y and KASAN=y options selected. With branch profiling enabled we end up calling ftrace_likely_update() before kasan_early_init(). ftrace_likely_update() is built with KASAN instrumentation, so calling it before kasan has been initialized leads to crash. Use DISABLE_BRANCH_PROFILING define to make sure that we don't call ftrace_likely_update() from early code before kasan_early_init(). Fixes: ef7f0d6a6ca8 ("x86_64: add KASan support") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Alexander Potapenko <glider@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: lkp@01.org Cc: Dmitry Vyukov <dvyukov@google.com> Link: http://lkml.kernel.org/r/20170313163337.1704-1-aryabinin@virtuozzo.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/tsc: Fix ART for TSC_KNOWN_FREQPeter Zijlstra2017-03-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 44fee88cea43d3c2cac962e0439cb10a3cabff6d upstream. Subhransu reported that convert_art_to_tsc() isn't working for him. The ART to TSC relation is only set up for systems which use the refined TSC calibration. Systems with known TSC frequency (available via CPUID 15) are not using the refined calibration and therefor the ART to TSC relation is never established. Add the setup to the known frequency init path which skips ART calibration. The init code needs to be duplicated as for systems which use refined calibration the ART setup must be delayed until calibration has been done. The problem has been there since the ART support was introdduced, but only detected now because Subhransu tested the first time on hardware which has TSC frequency enumerated via CPUID 15. Note for stable: The conditional has changed from TSC_RELIABLE to TSC_KNOWN_FREQUENCY. [ tglx: Rewrote changelog and identified the proper 'Fixes' commit ] Fixes: f9677e0f8308 ("x86/tsc: Always Running Timer (ART) correlated clocksource") Reported-by: "Prusty, Subhransu S" <subhransu.s.prusty@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: christopher.s.hall@intel.com Cc: kevin.b.stanton@intel.com Cc: john.stultz@linaro.org Cc: akataria@vmware.com Link: http://lkml.kernel.org/r/20170313145712.GI3312@twins.programming.kicks-ass.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/unwind: Fix last frame check for aligned function stacksJosh Poimboeuf2017-03-221-6/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 87a6b2975f0d340c75b7488d22d61d2f98fb8abf upstream. Pavel Machek reported the following warning on x86-32: WARNING: kernel stack frame pointer at f50cdf98 in swapper/2:0 has bad value (null) The warning is caused by the unwinder not realizing that it reached the end of the stack, due to an unusual prologue which gcc sometimes generates for aligned stacks. The prologue is based on a gcc feature called the Dynamic Realign Argument Pointer (DRAP). It's almost always enabled for aligned stacks when -maccumulate-outgoing-args isn't set. This issue is similar to the one fixed by the following commit: 8023e0e2a48d ("x86/unwind: Adjust last frame check for aligned function stacks") ... but that fix was specific to x86-64. Make the fix more generic to cover x86-32 as well, and also ensure that the return address referred to by the frame pointer is a copy of the original return address. Fixes: acb4608ad186 ("x86/unwind: Create stack frames for saved syscall registers") Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: http://lkml.kernel.org/r/50d4924db716c264b14f1633037385ec80bf89d2.1489465609.git.jpoimboe@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/vm86: Fix unused variable warning if THP is disabledKirill A. Shutemov2017-02-131-2/+3
| | | | | | | | | | | | | | | | | | | | | | | GCC complains about unused variable 'vma' in mark_screen_rdonly() if THP is disabled: arch/x86/kernel/vm86_32.c: In function ‘mark_screen_rdonly’: arch/x86/kernel/vm86_32.c:180:26: warning: unused variable ‘vma’ [-Wunused-variable] struct vm_area_struct *vma = find_vma(mm, 0xA0000); That's silly. pmd_trans_huge() resolves to 0 when THP is disabled, so the whole block should be eliminated. Moving the variable declaration outside the if() block shuts GCC up. Reported-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Borislav Petkov <bp@suse.de> Cc: Carlos O'Donell <carlos@redhat.com> Link: http://lkml.kernel.org/r/20170213125228.63645-1-kirill.shutemov@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2017-02-115-15/+35
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Last minute x86 fixes: - Fix a softlockup detector warning and long delays if using ptdump with KASAN enabled. - Two more TSC-adjust fixes for interesting firmware interactions. - Two commits to fix an AMD CPU topology enumeration bug that caused a measurable gaming performance regression" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/ptdump: Fix soft lockup in page table walker x86/tsc: Make the TSC ADJUST sanitizing work for tsc_reliable x86/tsc: Avoid the large time jump when sanitizing TSC ADJUST x86/CPU/AMD: Fix Zen SMT topology x86/CPU/AMD: Bring back Compute Unit ID
| * x86/tsc: Make the TSC ADJUST sanitizing work for tsc_reliableThomas Gleixner2017-02-101-9/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the TSC is marked reliable then the synchronization check is skipped, but that also skips the TSC ADJUST sanitizing code. So on a machine with a wreckaged BIOS the TSC deviation between CPUs might go unnoticed. Let the TSC adjust sanitizing code run unconditionally and just skip the expensive synchronization checks when TSC is marked reliable. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Olof Johansson <olof@lixom.net> Link: http://lkml.kernel.org/r/20170209151231.491189912@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * x86/tsc: Avoid the large time jump when sanitizing TSC ADJUSTThomas Gleixner2017-02-101-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Olof reported that on a machine which has a BIOS wreckaged TSC the timestamps in dmesg are making a large jump because the TSC value is jumping forward after resetting the TSC ADJUST register to a sane value. This can be avoided by calling the TSC ADJUST saniziting function before initializing the per cpu sched clock machinery. That takes the offset into account and avoid the time jump. What cannot be avoided is that the 'Firmware Bug' warnings on the secondary CPUs are printed with the large time offsets because it would be too much effort and ugly hackery to print those warnings into a buffer and emit them after the adjustemt on the starting CPUs. It's a firmware bug and should be fixed in firmware. The weird timestamps are collateral damage and just illustrate the sillyness of the BIOS folks: [ 0.397445] smp: Bringing up secondary CPUs ... [ 0.402100] x86: Booting SMP configuration: [ 0.406343] .... node #0, CPUs: #1 [1265776479.930667] [Firmware Bug]: TSC ADJUST differs: Reference CPU0: -2978888639075328 CPU1: -2978888639183101 [1265776479.944664] TSC ADJUST synchronize: Reference CPU0: 0 CPU1: -2978888639183101 [ 0.508119] #2 [1265776480.032346] [Firmware Bug]: TSC ADJUST differs: Reference CPU0: -2978888639075328 CPU2: -2978888639183677 [1265776480.044192] TSC ADJUST synchronize: Reference CPU0: 0 CPU2: -2978888639183677 [ 0.607643] #3 [1265776480.131874] [Firmware Bug]: TSC ADJUST differs: Reference CPU0: -2978888639075328 CPU3: -2978888639184530 [1265776480.143720] TSC ADJUST synchronize: Reference CPU0: 0 CPU3: -2978888639184530 [ 0.707108] smp: Brought up 1 node, 4 CPUs [ 0.711271] smpboot: Total of 4 processors activated (21698.88 BogoMIPS) Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170209151231.411460506@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * x86/CPU/AMD: Fix Zen SMT topologyYazen Ghannam2017-02-051-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After: a33d331761bc ("x86/CPU/AMD: Fix Bulldozer topology") our SMT scheduling topology for Fam17h systems is broken, because the ThreadId is included in the ApicId when SMT is enabled. So, without further decoding cpu_core_id is unique for each thread rather than the same for threads on the same core. This didn't affect systems with SMT disabled. Make cpu_core_id be what it is defined to be. Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> # 4.9 Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170205105022.8705-2-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * x86/CPU/AMD: Bring back Compute Unit IDBorislav Petkov2017-02-053-4/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit: a33d331761bc ("x86/CPU/AMD: Fix Bulldozer topology") restored the initial approach we had with the Fam15h topology of enumerating CU (Compute Unit) threads as cores. And this is still correct - they're beefier than HT threads but still have some shared functionality. Our current approach has a problem with the Mad Max Steam game, for example. Yves Dionne reported a certain "choppiness" while playing on v4.9.5. That problem stems most likely from the fact that the CU threads share resources within one CU and when we schedule to a thread of a different compute unit, this incurs latency due to migrating the working set to a different CU through the caches. When the thread siblings mask mirrors that aspect of the CUs and threads, the scheduler pays attention to it and tries to schedule within one CU first. Which takes care of the latency, of course. Reported-by: Yves Dionne <yves.dionne@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> # 4.9 Cc: Brice Goglin <Brice.Goglin@inria.fr> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yazen Ghannam <yazen.ghannam@amd.com> Link: http://lkml.kernel.org/r/20170205105022.8705-1-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | Revert "x86/ioapic: Restore IO-APIC irq_chip retrigger callback"Linus Torvalds2017-02-081-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 020eb3daaba2857b32c4cf4c82f503d6a00a67de. Gabriel C reports that it causes his machine to not boot, and we haven't tracked down the reason for it yet. Since the bug it fixes has been around for a longish time, we're better off reverting the fix for now. Gabriel says: "It hangs early and freezes with a lot RCU warnings. I bisected it down to : > Ruslan Ruslichenko (1): > x86/ioapic: Restore IO-APIC irq_chip retrigger callback Reverting this one fixes the problem for me.. The box is a PRIMERGY TX200 S5 , 2 socket , 2 x E5520 CPU(s) installed" and Ruslan and Thomas are currently stumped. Reported-and-bisected-by: Gabriel C <nix.or.die@gmail.com> Cc: Ruslan Ruslichenko <rruslich@cisco.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org # for the backport of the original commit Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2017-02-042-0/+3
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: - Prevent double activation of interrupt lines, which causes problems on certain interrupt controllers - Handle the fallout of the above because x86 (ab)uses the activation function to reconfigure interrupts under the hood. * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/irq: Make irq activate operations symmetric irqdomain: Avoid activating interrupts more than once
| * x86/irq: Make irq activate operations symmetricThomas Gleixner2017-01-312-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent commit which prevents double activation of interrupts unearthed interesting code in x86. The code (ab)uses irq_domain_activate_irq() to reconfigure an already activated interrupt. That trips over the prevention code now. Fix it by deactivating the interrupt before activating the new configuration. Fixes: 08d85f3ea99f1 "irqdomain: Avoid activating interrupts more than once" Reported-and-tested-by: Mike Galbraith <efault@gmx.de> Reported-and-tested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1701311901580.3457@nanos
* | x86/mce: Make timer handling more robustThomas Gleixner2017-01-311-19/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Erik reported that on a preproduction hardware a CMCI storm triggers the BUG_ON in add_timer_on(). The reason is that the per CPU MCE timer is started by the CMCI logic before the MCE CPU hotplug callback starts the timer with add_timer_on(). So the timer is already queued which triggers the BUG. Using add_timer_on() is pretty pointless in this code because the timer is strictlty per CPU, initialized as pinned and all operations which arm the timer happen on the CPU to which the timer belongs. Simplify the whole machinery by using mod_timer() instead of add_timer_on() which avoids the problem because mod_timer() can handle already queued timers. Use __start_timer() everywhere so the earliest armed expiry time is preserved. Reported-by: Erik Veijola <erik.veijola@intel.com> Tested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@alien8.de> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1701310936080.3457@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | x86/microcode: Do not access the initrd after it has been freedBorislav Petkov2017-01-302-7/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we look for microcode blobs, we first try builtin and if that doesn't succeed, we fallback to the initrd supplied to the kernel. However, at some point doing boot, that initrd gets jettisoned and we shouldn't access it anymore. But we do, as the below KASAN report shows. That's because find_microcode_in_initrd() doesn't check whether the initrd is still valid or not. So do that. ================================================================== BUG: KASAN: use-after-free in find_cpio_data Read of size 1 by task swapper/1/0 page:ffffea0000db9d40 count:0 mapcount:0 mapping: (null) index:0x1 flags: 0x100000000000000() raw: 0100000000000000 0000000000000000 0000000000000001 00000000ffffffff raw: dead000000000100 dead000000000200 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 4.10.0-rc5-debug-00075-g2dbde22 #3 Hardware name: Dell Inc. XPS 13 9360/0839Y6, BIOS 1.2.3 12/01/2016 Call Trace: dump_stack ? _atomic_dec_and_lock ? __dump_page kasan_report_error ? pointer ? find_cpio_data __asan_report_load1_noabort ? find_cpio_data find_cpio_data ? vsprintf ? dump_stack ? get_ucode_user ? print_usage_bug find_microcode_in_initrd __load_ucode_intel ? collect_cpu_info_early ? debug_check_no_locks_freed load_ucode_intel_ap ? collect_cpu_info ? trace_hardirqs_on ? flat_send_IPI_mask_allbutself load_ucode_ap ? get_builtin_firmware ? flush_tlb_func ? do_raw_spin_trylock ? cpumask_weight cpu_init ? trace_hardirqs_off ? play_dead_common ? native_play_dead ? hlt_play_dead ? syscall_init ? arch_cpu_idle_dead ? do_idle start_secondary start_cpu Memory state around the buggy address: ffff880036e74f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880036e74f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff880036e75000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff880036e75080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880036e75100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Reported-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Tested-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170126165833.evjemhbqzaepirxo@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | x86/fpu/xstate: Fix xcomp_bv in XSAVES headerYu-cheng Yu2017-01-242-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The compacted-format XSAVES area is determined at boot time and never changed after. The field xsave.header.xcomp_bv indicates which components are in the fixed XSAVES format. In fpstate_init() we did not set xcomp_bv to reflect the XSAVES format since at the time there is no valid data. However, after we do copy_init_fpstate_to_fpregs() in fpu__clear(), as in commit: b22cbe404a9c x86/fpu: Fix invalid FPU ptrace state after execve() and when __fpu_restore_sig() does fpu__restore() for a COMPAT-mode app, a #GP occurs. This can be easily triggered by doing valgrind on a COMPAT-mode "Hello World," as reported by Joakim Tjernlund and others: https://bugzilla.kernel.org/show_bug.cgi?id=190061 Fix it by setting xcomp_bv correctly. This patch also moves the xcomp_bv initialization to the proper place, which was in copyin_to_xsaves() as of: 4c833368f0bf x86/fpu: Set the xcomp_bv when we fake up a XSAVES area which fixed the bug too, but it's more efficient and cleaner to initialize things once per boot, not for every signal handling operation. Reported-by: Kevin Hao <haokexin@gmail.com> Reported-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V. Shankar <ravi.v.shankar@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: haokexin@gmail.com Link: http://lkml.kernel.org/r/1485212084-4418-1-git-send-email-yu-cheng.yu@intel.com [ Combined it with 4c833368f0bf. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | x86/fpu: Set the xcomp_bv when we fake up a XSAVES areaKevin Hao2017-01-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I got the following calltrace on a Apollo Lake SoC with 32-bit kernel: WARNING: CPU: 2 PID: 261 at arch/x86/include/asm/fpu/internal.h:363 fpu__restore+0x1f5/0x260 [...] Hardware name: Intel Corp. Broxton P/NOTEBOOK, BIOS APLIRVPA.X64.0138.B35.1608091058 08/09/2016 Call Trace: dump_stack() __warn() ? fpu__restore() warn_slowpath_null() fpu__restore() __fpu__restore_sig() fpu__restore_sig() restore_sigcontext.isra.9() sys_sigreturn() do_int80_syscall_32() entry_INT80_32() The reason is that a #GP occurs when executing XRSTORS. The root cause is that we forget to set the xcomp_bv when we fake up the XSAVES area in the copyin_to_xsaves() function. Signed-off-by: Kevin Hao <haokexin@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Link: http://lkml.kernel.org/r/1485075023-30161-1-git-send-email-haokexin@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | x86/microcode/intel: Drop stashed AP patch pointer optimizationBorislav Petkov2017-01-231-8/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | This was meant to save us the scanning of the microcode containter in the initrd since the first AP had already done that but it can also hurt us: Imagine a single hyperthreaded CPU (Intel(R) Atom(TM) CPU N270, for example) which updates the microcode on the BSP but since the microcode engine is shared between the two threads, the update on CPU1 doesn't happen because it has already happened on CPU0 and we don't find a newer microcode revision on CPU1. Which doesn't set the intel_ucode_patch pointer and at initrd jettisoning time we don't save the microcode patch for later application. Now, when we suspend to RAM, the loaded microcode gets cleared so we need to reload but there's no patch saved in the cache. Removing the optimization fixes this issue and all is fine and dandy. Fixes: 06b8534cb728 ("x86/microcode: Rework microcode loading") Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170120202955.4091-2-bp@alien8.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86/ioapic: Restore IO-APIC irq_chip retrigger callbackRuslan Ruslichenko2017-01-181-0/+2
| | | | | | | | | | | | | | | | | | | | commit d32932d02e18 removed the irq_retrigger callback from the IO-APIC chip and did not add it to the new IO-APIC-IR irq chip. Unfortunately the software resend fallback is not enabled on X86, so edge interrupts which are received during the lazy disabled state of the interrupt line are not retriggered and therefor lost. Restore the callbacks. [ tglx: Massaged changelog ] Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") Signed-off-by: Ruslan Ruslichenko <rruslich@cisco.com> Cc: xe-linux-external@cisco.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1484662432-13580-1-git-send-email-rruslich@cisco.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2017-01-156-72/+51
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - unwinder fixes - AMD CPU topology enumeration fixes - microcode loader fixes - x86 embedded platform fixes - fix for a bootup crash that may trigger when clearcpuid= is used with invalid values" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mpx: Use compatible types in comparison to fix sparse error x86/tsc: Add the Intel Denverton Processor to native_calibrate_tsc() x86/entry: Fix the end of the stack for newly forked tasks x86/unwind: Include __schedule() in stack traces x86/unwind: Disable KASAN checks for non-current tasks x86/unwind: Silence warnings for non-current tasks x86/microcode/intel: Use correct buffer size for saving microcode data x86/microcode/intel: Fix allocation size of struct ucode_patch x86/microcode/intel: Add a helper which gives the microcode revision x86/microcode: Use native CPUID to tickle out microcode revision x86/CPU: Add native CPUID variants returning a single datum x86/boot: Add missing declaration of string functions x86/CPU/AMD: Fix Bulldozer topology x86/platform/intel-mid: Rename 'spidev' to 'mrfld_spidev' x86/cpu: Fix typo in the comment for Anniedale x86/cpu: Fix bootup crashes by sanitizing the argument of the 'clearcpuid=' command-line option
| * x86/tsc: Add the Intel Denverton Processor to native_calibrate_tsc()Len Brown2017-01-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Intel Denverton microserver uses a 25 MHz TSC crystal, so we can derive its exact [*] TSC frequency using CPUID and some arithmetic, eg.: TSC: 1800 MHz (25000000 Hz * 216 / 3 / 1000000) [*] 'exact' is only as good as the crystal, which should be +/- 20ppm Signed-off-by: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/306899f94804aece6d8fa8b4223ede3b48dbb59c.1484287748.git.len.brown@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * x86/unwind: Disable KASAN checks for non-current tasksJosh Poimboeuf2017-01-121-2/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are a handful of callers to save_stack_trace_tsk() and show_stack() which try to unwind the stack of a task other than current. In such cases, it's remotely possible that the task is running on one CPU while the unwinder is reading its stack from another CPU, causing the unwinder to see stack corruption. These cases seem to be mostly harmless. The unwinder has checks which prevent it from following bad pointers beyond the bounds of the stack. So it's not really a bug as long as the caller understands that unwinding another task will not always succeed. In such cases, it's possible that the unwinder may read a KASAN-poisoned region of the stack. Account for that by using READ_ONCE_NOCHECK() when reading the stack of another task. Use READ_ONCE() when reading the stack of the current task, since KASAN warnings can still be useful for finding bugs in that case. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/4c575eb288ba9f73d498dfe0acde2f58674598f1.1483978430.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * x86/unwind: Silence warnings for non-current tasksJosh Poimboeuf2017-01-121-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are a handful of callers to save_stack_trace_tsk() and show_stack() which try to unwind the stack of a task other than current. In such cases, it's remotely possible that the task is running on one CPU while the unwinder is reading its stack from another CPU, causing the unwinder to see stack corruption. These cases seem to be mostly harmless. The unwinder has checks which prevent it from following bad pointers beyond the bounds of the stack. So it's not really a bug as long as the caller understands that unwinding another task will not always succeed. Since stack "corruption" on another task's stack isn't necessarily a bug, silence the warnings when unwinding tasks other than current. Reported-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/00d8c50eea3446c1524a2a755397a3966629354c.1483978430.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * x86/microcode/intel: Use correct buffer size for saving microcode dataJunichi Nomura2017-01-091-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In generic_load_microcode(), curr_mc_size is the size of the last allocated buffer and since we have this performance "optimization" there to vmalloc a new buffer only when the current one is bigger, curr_mc_size ends up becoming the size of the biggest buffer we've seen so far. However, we end up saving the microcode patch which matches our CPU and its size is not curr_mc_size but the respective mc_size during the iteration while we're staring at it. So save that mc_size into a separate variable and use it to store the previously found microcode buffer. Without this fix, we could get oops like this: BUG: unable to handle kernel paging request at ffffc9000e30f000 IP: __memcpy+0x12/0x20 ... Call Trace: ? kmemdup+0x43/0x60 __alloc_microcode_buf+0x44/0x70 save_microcode_patch+0xd4/0x150 generic_load_microcode+0x1b8/0x260 request_microcode_user+0x15/0x20 microcode_write+0x91/0x100 __vfs_write+0x34/0x120 vfs_write+0xc1/0x130 SyS_write+0x56/0xc0 do_syscall_64+0x6c/0x160 entry_SYSCALL64_slow_path+0x25/0x25 Fixes: 06b8534cb728 ("x86/microcode: Rework microcode loading") Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/4f33cbfd-44f2-9bed-3b66-7446cd14256f@ce.jp.nec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * x86/microcode/intel: Fix allocation size of struct ucode_patchJunichi Nomura2017-01-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | We allocate struct ucode_patch here. @size is the size of microcode data and used for kmemdup() later in this function. Fixes: 06b8534cb728 ("x86/microcode: Rework microcode loading") Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/7a730dc9-ac17-35c4-fe76-dfc94e5ecd95@ce.jp.nec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * x86/microcode/intel: Add a helper which gives the microcode revisionBorislav Petkov2017-01-092-38/+16
| | | | | | | | | | | | | | | | | | | | | | | | Since on Intel we're required to do CPUID(1) first, before reading the microcode revision MSR, let's add a special helper which does the required steps so that we don't forget to do them next time, when we want to read the microcode revision. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20170109114147.5082-4-bp@alien8.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * x86/microcode: Use native CPUID to tickle out microcode revisionBorislav Petkov2017-01-092-24/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Intel supplies the microcode revision value in MSR 0x8b (IA32_BIOS_SIGN_ID) after CPUID(1) has been executed. Execute it each time before reading that MSR. It used to do sync_core() which did do CPUID but c198b121b1a1 ("x86/asm: Rewrite sync_core() to use IRET-to-self") changed the sync_core() implementation so we better make the microcode loading case explicit, as the SDM documents it. Reported-and-tested-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20170109114147.5082-3-bp@alien8.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * x86/CPU/AMD: Fix Bulldozer topologyBorislav Petkov2017-01-061-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following commit: 8196dab4fc15 ("x86/cpu: Get rid of compute_unit_id") ... broke the initial strategy for Bulldozer-based cores' topology, where we consider each thread of a compute unit a standalone core and not a HT or SMT thread. Revert to the firmware-supplied core_id numbering and do not make them thread siblings as we don't consider them for such even if they technically are, more or less. Reported-and-tested-by: Brice Goglin <Brice.Goglin@inria.fr> Tested-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> # v4.6+ Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 8196dab4fc15 ("x86/cpu: Get rid of compute_unit_id") Link: http://lkml.kernel.org/r/20170105092638.5247-1-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * x86/cpu: Fix bootup crashes by sanitizing the argument of the 'clearcpuid=' ↵Lukasz Odzioba2017-01-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | command-line option A negative number can be specified in the cmdline which will be used as setup_clear_cpu_cap() argument. With that we can clear/set some bit in memory predceeding boot_cpu_data/cpu_caps_cleared which may cause kernel to misbehave. This patch adds lower bound check to setup_disablecpuid(). Boris Petkov reproduced a crash: [ 1.234575] BUG: unable to handle kernel paging request at ffffffff858bd540 [ 1.236535] IP: memcpy_erms+0x6/0x10 Signed-off-by: Lukasz Odzioba <lukasz.odzioba@intel.com> Acked-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: andi.kleen@intel.com Cc: bp@alien8.de Cc: dave.hansen@linux.intel.com Cc: luto@kernel.org Cc: slaoub@gmail.com Fixes: ac72e7888a61 ("x86: add generic clearcpuid=... option") Link: http://lkml.kernel.org/r/1482933340-11857-1-git-send-email-lukasz.odzioba@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | Merge branch 'stable/for-linus-4.10' of ↵Linus Torvalds2017-01-061-4/+2
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb fixes from Konrad Rzeszutek Wilk: "This has one fix to make i915 work when using Xen SWIOTLB, and a feature from Geert to aid in debugging of devices that can't do DMA outside the 32-bit address space. The feature from Geert is on top of v4.10 merge window commit (specifically you pulling my previous branch), as his changes were dependent on the Documentation/ movement patches. I figured it would just easier than me trying than to cherry-pick the Documentation patches to satisfy git. The patches have been soaking since 12/20, albeit I updated the last patch due to linux-next catching an compiler error and adding an Tested-and-Reported-by tag" * 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: Export swiotlb_max_segment to users swiotlb: Add swiotlb=noforce debug option swiotlb: Convert swiotlb_force from int to enum x86, swiotlb: Simplify pci_swiotlb_detect_override()
| * swiotlb: Convert swiotlb_force from int to enumGeert Uytterhoeven2016-12-191-1/+1
| | | | | | | | | | | | | | | | | | Convert the flag swiotlb_force from an int to an enum, to prepare for the advent of more possible values. Suggested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
| * x86, swiotlb: Simplify pci_swiotlb_detect_override()Geert Uytterhoeven2016-12-191-3/+1
| | | | | | | | | | | | | | | | | | At the end of the function, the local variable use_swiotlb has always the same value as the global variable swiotlb. Hence drop the local variable completely. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | x86/mce/AMD: Make the init code more robustThomas Gleixner2016-12-261-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | If mce_device_init() fails then the mce device pointer is NULL and the AMD mce code happily dereferences it. Add a sanity check. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds2016-12-256-21/+21
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer type cleanups from Thomas Gleixner: "This series does a tree wide cleanup of types related to timers/timekeeping. - Get rid of cycles_t and use a plain u64. The type is not really helpful and caused more confusion than clarity - Get rid of the ktime union. The union has become useless as we use the scalar nanoseconds storage unconditionally now. The 32bit timespec alike storage got removed due to the Y2038 limitations some time ago. That leaves the odd union access around for no reason. Clean it up. Both changes have been done with coccinelle and a small amount of manual mopping up" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ktime: Get rid of ktime_equal() ktime: Cleanup ktime_set() usage ktime: Get rid of the union clocksource: Use a plain u64 instead of cycle_t
| * | clocksource: Use a plain u64 instead of cycle_tThomas Gleixner2016-12-256-21/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
* | | Merge branch 'smp-urgent-for-linus' of ↵Linus Torvalds2016-12-255-6/+5
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP hotplug notifier removal from Thomas Gleixner: "This is the final cleanup of the hotplug notifier infrastructure. The series has been reintgrated in the last two days because there came a new driver using the old infrastructure via the SCSI tree. Summary: - convert the last leftover drivers utilizing notifiers - fixup for a completely broken hotplug user - prevent setup of already used states - removal of the notifiers - treewide cleanup of hotplug state names - consolidation of state space There is a sphinx based documentation pending, but that needs review from the documentation folks" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/armada-xp: Consolidate hotplug state space irqchip/gic: Consolidate hotplug state space coresight/etm3/4x: Consolidate hotplug state space cpu/hotplug: Cleanup state names cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions staging/lustre/libcfs: Convert to hotplug state machine scsi/bnx2i: Convert to hotplug state machine scsi/bnx2fc: Convert to hotplug state machine cpu/hotplug: Prevent overwriting of callbacks x86/msr: Remove bogus cleanup from the error path bus: arm-ccn: Prevent hotplug callback leak perf/x86/intel/cstate: Prevent hotplug callback leak ARM/imx/mmcd: Fix broken cpu hotplug handling scsi: qedi: Convert to hotplug state machine
| * | cpu/hotplug: Cleanup state namesThomas Gleixner2016-12-254-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the state names got added a script was used to add the extra argument to the calls. The script basically converted the state constant to a string, but the cleanup to convert these strings into meaningful ones did not happen. Replace all the useless strings with 'subsys/xxx/yyy:state' strings which are used in all the other places already. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * | x86/msr: Remove bogus cleanup from the error pathThomas Gleixner2016-12-251-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The error cleanup which is invoked when the hotplug state setup failed tries to remove the failed state, which is broken. Fixes: 8fba38c937cd ("x86/msr: Convert to hotplug state machine") Reported-by: kernel test robot <fengguang.wu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Siewior <bigeasy@linutronix.de>
OpenPOWER on IntegriCloud