summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* powerpc: Remove unused/obsolete CONFIG_XICSBenjamin Herrenschmidt2011-05-191-5/+0
| | | | Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Add kconfig for muxed smp ipi supportMilton Miller2011-05-191-0/+8
| | | | | | | | | | | | | | | | | | Compile the new smp ipi mux and demux code only if a platform will make use of it. The new config is selected as required. The new cause_ipi smp op is only available conditionally to point out configs where the select is required; this makes setting the op an immediate fail instead of a deferred unresolved symbol at link. This also creates a new config for power surge powermac upgrade support that can be disabled in expert mode but is default on. I also removed the depends / default y on CONFIG_XICS since it is selected by PSERIES. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Add WSP platformDavid Gibson2011-05-061-0/+1
| | | | | | | | | | | | | | Add a platform for the Wire Speed Processor, based on the PPC A2. This includes code for the ICS & OPB interrupt controllers, as well as a SCOM backend, and SCOM based cpu bringup. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Jack Miller <jack@codezen.org> Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/pci: Move IO workarounds to the common kernel dirMichael Ellerman2011-04-271-0/+3
| | | | | | Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/pci: Split IO vs MMIO indirect access hooksMichael Ellerman2011-04-271-2/+8
| | | | | | | | The goal is to avoid adding overhead to MMIO when only PIO is needed Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Add NAP mode support on Power7 in HV modeBenjamin Herrenschmidt2011-04-201-0/+4
| | | | | | | | | Wakeup comes from the system reset handler with a potential loss of the non-hypervisor CPU state. We save the non-volatile state on the stack and a pointer to it in the PACA, which the system reset handler uses to restore things Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Documentation: fix minor typos/spellingSylvestre Ledru2011-04-041-1/+1
| | | | | | | | | | | Fix some minor typos: * informations => information * there own => their own * these => this Signed-off-by: Sylvestre Ledru <sylvestre.ledru@scilab.org> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge v2.6.37-rc8 into powerpc/nextGrant Likely2010-12-291-2/+11
|\
| * KVM: PPC: Generic KVM PV guest supportAlexander Graf2010-10-241-0/+10
| | | | | | | | | | | | | | | | | | | | | | We have all the hypervisor pieces in place now, but the guest parts are still missing. This patch implements basic awareness of KVM when running Linux as guest. It doesn't do anything with it yet though. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
| * powerpc: Fix config dependency problem with MPIC_U3_HT_IRQSAndreas Schwab2010-08-241-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | MPIC_U3_HT_IRQS is selected both by PPC_PMAC64 and PPC_MAPLE, but depends on PPC_MAPLE, so a PPC_PMAC64-only config gets this warning: warning: (PPC_PMAC64 && PPC_PMAC && POWER4 || PPC_MAPLE && PPC64 && PPC_BOOK3S) selects MPIC_U3_HT_IRQS which has unmet direct dependencies (PPC_MAPLE) Fix that by removing the dependency on PPC_MAPLE. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | powerpc/5xxx: extend mpc8xxx_gpio driver to support mpc512x gpiosAnatolij Gustschin2010-09-101-3/+4
|/ | | | | | | | | | | | | | | | | | | The GPIO controller of MPC512x is slightly different from 8xxx GPIO controllers. The register interface is the same except the external interrupt control register. The MPC512x GPIO controller differentiates between four interrupt event types and therefore provides two interrupt control registers, GPICR1 and GPICR2. GPIO[0:15] interrupt event types are configured in GPICR1 register, GPIO[16:31] - in GPICR2 register. This patch adds MPC512x speciffic set_type() callback and updates config file and comments. Additionally the gpio chip registration function is changed to use for_each_matching_node() preventing multiple registration if a node claimes compatibility with another gpio controller type. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* powerpc/85xx: Kconfig cleanupKumar Gala2009-11-201-2/+2
| | | | | | | Introduce new FSL_SOC_BOOKE Kconfig to handle both 85xx and QorIQ based chips. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/chrp: Use the same RTAS daemon as pSeriesBenjamin Herrenschmidt2009-10-301-0/+5
| | | | | | | | | | | | | | | | The CHRP code has some fishy timer based code to scan the RTAS event log, which uses a 1KB stack buffer and doesn't even use the results. The pSeries code as a nicer daemon that allows userspace to read the event log and basically uses the same RTAS interface This patch moves rtasd.c out of platform/pseries and makes it usable by CHRP, after removing the old crufty event log mechanism in there. The nvram logging part of the daemon is still only available on 64-bit since the underlying nvram management routines aren't currently shared. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/virtex: Add support for Xilinx PCI host bridgeRoderick Colenbrander2009-06-061-0/+4
| | | | | | | | This patch adds support for the Xilinx plbv46-pci-1.03.a PCI host bridge IPcore. Signed-off-by: Roderick Colenbrander <thunderbird2k@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* Merge branch 'for-linus' of ↵Linus Torvalds2009-04-031-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits) trivial: Update my email address trivial: NULL noise: drivers/mtd/tests/mtd_*test.c trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h trivial: Fix misspelling of "Celsius". trivial: remove unused variable 'path' in alloc_file() trivial: fix a pdlfush -> pdflush typo in comment trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL trivial: wusb: Storage class should be before const qualifier trivial: drivers/char/bsr.c: Storage class should be before const qualifier trivial: h8300: Storage class should be before const qualifier trivial: fix where cgroup documentation is not correctly referred to trivial: Give the right path in Documentation example trivial: MTD: remove EOL from MODULE_DESCRIPTION trivial: Fix typo in bio_split()'s documentation trivial: PWM: fix of #endif comment trivial: fix typos/grammar errors in Kconfig texts trivial: Fix misspelling of firmware trivial: cgroups: documentation typo and spelling corrections trivial: Update contact info for Jochen Hein trivial: fix typo "resgister" -> "register" ...
| * trivial: fix typos/grammar errors in Kconfig textsMatt LaPlante2009-03-301-1/+1
| | | | | | | | | | | | Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | powerpc/cell: Make axonram depends on BLOCKMichael Ellerman2009-03-241-1/+1
| | | | | | | | | | | | | | Fix axonram driver dependency Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | powerpc/kconfig: Kill PPC_MULTIPLATFORMBenjamin Herrenschmidt2009-03-111-12/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_PPC_MULTIPLATFORM is a remain of the pre-powerpc days and isn't really meaningful anymore. It was basically equivalent to PPC64 || 6xx. This removes it along with the following changes: - 32-bit platforms that relied on PPC32 && PPC_MULTIPLATFORM now rely on 6xx which is what they want anyway. - A new symbol, PPC_BOOK3S, is defined that represent compliance with the "Server" variant of the architecture. This is set when either 6xx or PPC64 is set and open the door for future BOOK3E 64-bit. - 64-bit platforms that relied on PPC64 && PPC_MULTIPLATFORM now use PPC64 && PPC_BOOK3S - A separate and selectable CONFIG_PPC_OF_BOOT_TRAMPOLINE option is now used to control the use of prom_init.c Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | powerpc/cell: Fix dependency in cpufreqArnd Bergmann2009-02-231-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | cbe_cpufreq has a partial dependency on cbe_cpufreq_pmi, which cannot be easily expressed in Kconfig. This fixes it by introducing an extra Kconfig symbol CBE_CPUFREQ_PMI_ENABLE. To make the dependency clearer, turn PPC_PMI into an automatic symbol. Reported-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | powerpc/amigaone: Add platform support for AmigaOneGerhard Pircher2009-02-111-0/+1
|/ | | | | | | | | | | | | | | This commit adds the setup code for booting Linux on AmigaOne G3SE (G3 only), AmigaOne XE and uA1 (G3/G4) desktop computers. These boards were sold by Eyetech and are based on MAI Logic's Teron boards and its Articia S northbridge. The AmigaOne uses U-boot as firmware, which doesn't support a flattened device tree yet. The northbridge has some design flaws, which makes it necessary to use non cacheable memory for DMA operations (CONFIG_NOT_COHERENT_CACHE) and to avoid setting the coherence (M) flag for memory pages. Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/83xx: Move mcu_mpc8349emitx driver out of drivers/i2c/chips/Anton Vorontsov2009-01-131-0/+11
| | | | | | | | | | This patch is used to help Jean Delvare to get rid of drivers/i2c/chips/ directory. The new location suggested by Kumar Gala: as the driver is 83xx specific it's placed into arch/powerpc/platforms/83xx/. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Implement GPIO driver for simple memory-mapped banksAnton Vorontsov2008-12-301-0/+11
| | | | | | | | | | | | | | | | | The driver supports very simple GPIO controllers, that is, when a controller provides just a 'data' register. Such controllers may be found in various BCSRs (Board's FPGAs used to control board's switches, LEDs, chip-selects, Ethernet/USB PHY power, etc). So far we support only 1-byte GPIO banks. Support for other widths may be implemented when/if needed. p.s. To avoid "made up" compatible entries (like compatible = "simple-gpio"), boards must call simple_gpiochip_init() to pass the compatible string. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/QE: move QE_GPIO Kconfig symbol into the platforms/KconfigAnton Vorontsov2008-10-131-0/+9
| | | | | | | | | | | | Specifying user-selectable option in the qe_lib/Kconfig was a bad idea because the qe_lib/Kconfig is included into the top level Kconfig, and thus the QE_GPIO option appears at the top level menu. This patch effectively moves the QE_GPIO option under the platform menu instead. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: make Freescale QE support a selectable Kconfig optionTimur Tabi2008-10-131-1/+2
| | | | | | | | | | | | Modify the Kconfig so that Freescale QUICC Engine (QE) support is a selectable option, thereby allowing users to compile kernels without any QE support. The drawback is that QE support is now disabled by default on platforms that have a QE, and so a defconfig is needed to enable QE and QE devices (like UCC GETH). Fortunately, all the current relevant defconfigs do that already. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Move 8xxx GPIO Kconfig under the platform menuKumar Gala2008-09-231-0/+9
| | | | | | | The initial patch had the option at the top level which wasn't quite right. Moving under the platform options is a bit better. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* cpm_uart: Add generic clock API support to set baudratesLaurent Pinchart2008-07-281-0/+1
| | | | | | | | | | This patch introduces baudrate setting support via the generic clock API. When present the optional device tree clock property is used instead of fsl-cpm-brg. Platforms can then define complex clock schemes, to output the serial clock on an external pin for instance. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* cpm2: Implement GPIO LIB API on CPM2 Freescale SoC.Laurent Pinchart2008-07-281-0/+2
| | | | | | | | | | | | This patch implement GPIO LIB support for the CPM2 GPIOs. The code can also be used for CPM1 GPIO port E, as both cores are compatible at the register level. Based on earlier work by Laurent Pinchart. Signed-off-by: Jochen Friedrich <jochen@scram.de> Cc: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Remove Kconfig PPC_CPM_NEW_BINDINGKumar Gala2008-07-161-5/+0
| | | | | | | With arch/ppc gone and all in kernel users of CONFIG_PPC_CPM_NEW_BINDING fixed up we dont have need for the Kconfig option anymore. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: pci config cleanupJohn Rigby2008-07-161-0/+1
| | | | | | | | | | | | | | | | | | | | Choosing PCI or not at config time is allowed on some platforms via an if expression in arch/powerpc/Kconfig. To add a new platform with PCI support selectable at config time, you must change the if expression. This patch makes this easier by changing: bool "PCI support" if <long expression> to bool "PCI support" if PPC_PCI_CHOICE and adding select PPC_PCI_CHOICE to all the config nodes that were previously in the PCI if expression. Platforms with unconditional PCI support continue to just select PCI in their config nodes. Signed-off-by: John Rigby <jrigby@freescale.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Add 82xx/83xx/86xx to 6xx MultiplatformKumar Gala2008-07-141-30/+3
| | | | | | | | | | There isn't any reason at this point that we can't build 82xx, 83xx & 86xx support in with the other 6xx based boards. Twiddle the Kconfigs to allow this. This allows us to remove the machine type selection for related to 6xx. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] celleb: Move the files for celleb base supportIshizaki Kou2008-04-241-1/+0
| | | | | | | | | | This moves the base code for celleb support into platforms/cell/. All files in this patch are used by celleb-beat and celleb-native commonly. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] CPM: Always use new binding.Scott Wood2008-04-171-7/+1
| | | | | | | | The kconfig entry can go away once arch/ppc and references to the config in drivers are removed. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 83xx: Make 83xx perfmon support selectableAndy Fleming2008-03-101-1/+0
| | | | | | | | | | | | Not all e300 cores support the performance monitors, and the ones that don't will be confused by the mf/mtpmr instructions. This allows the support to be optional, so the 8349 can turn it off while the 8379 can turn it on. Sadly, those aren't config options, so it will be left to the defconfigs and the users to make that determination. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Remove unused CONFIG_WANT_DEVICE_TREEGrant Likely2008-02-141-2/+0
| | | | | | | | | | | CONFIG_DEVICE_TREE was the only user of CONFIG_WANT_DEVICE_TREE but it was removed in commit id 25431333813686654907ab987fb5de10c10a16db (bootwrapper: Build multiple cuImages). This removes CONFIG_WANT_DEVICE_TREE from Kconfig and the defconfigs. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
* Merge branch 'for-2.6.25' of git://git.secretlab.ca/git/linux-2.6-mpc52xx ↵Paul Mackerras2008-02-071-0/+1
|\ | | | | | | into for-2.6.25
| * [POWERPC] mpc512x: Basic platform supportJohn Rigby2008-02-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 512x is very similar to 83xx and most of this is patterned after code from 83xx. New platform: changed: arch/powerpc/Kconfig arch/powerpc/platforms/Kconfig arch/powerpc/platforms/Kconfig.cputype arch/powerpc/platforms/Makefile new: arch/powerpc/platforms/512x/* include/asm-powerpc/mpc512x.h Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | [POWERPC} Add oprofile support for e300Andy Fleming2008-02-051-0/+1
|/ | | | | | | | The e300 c3 and c4 variants support hardware performance monitor counters which are identical to those found in the e500. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 83xx: rework platform KconfigKumar Gala2008-01-281-1/+1
| | | | | | | | | | * Allow multiple boards to be selected in a single build * Removed Kconfig option '83xx' which existed only for compat with arch/ppc * Removed Kconfig option 'PPC_MPC836x' since its not used * Renamed Kconfig option 'MPC834x' to 'PPC_MPC834x' to match others * Added a multiplatform 83xx defconfig (mpc83xx_defconfig). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] CPM2: Make support for the CPM2 optional on 8560 based boardsPaul Gortmaker2008-01-281-2/+2
| | | | | | | | | Currently there is no way to disable the CPM2 support. Some boards, like the SBC8560 have their own external UART and don't have any direct dependencies on the CPM for a serial console or anything else. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Enable RTC for Ebony and Walnut (v2)David Gibson2008-01-251-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | This patch extends the Ebony and Walnut platform code to instantiate the existing ds1742 RTC class driver for the DS1743 RTC/NVRAM chip found on both those boards. The patch uses a helper function to scan the device tree and instantiate the appropriate platform_device based on it, so it should be easy to extend for other boards which have mmio mapped RTC chips. Along with this, the device tree binding for the ds1743 chips is tweaked, based on the existing DS1385 OF binding found at: http://playground.sun.com/1275/proposals/Closed/Remanded/Accepted/346-it.txt Although that document covers the NVRAM portion of the chip, whereas here we're interested in the RTC portion, so it's not entirely clear if that's a good model. This implements only RTC class driver support - that is /dev/rtc0, not /dev/rtc, and the low-level get/set time callbacks remain unimplemented. That means in order to get at the clock you will either need a modified version of hwclock which will look at /dev/rtc0, or you'll need to configure udev to symlink rtc0 to rtc. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* [POWERPC] Add IPIC Kconfig optionJohn Rigby2008-01-231-0/+5
| | | | | | | IPIC is not just for 83xx anymore so make it a separate config option. Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] QE: Add ability to upload QE firmwareTimur Tabi2008-01-231-0/+1
| | | | | | | | | | | Define the layout of a binary blob that contains a QE firmware and instructions on how to upload it. Add function qe_upload_firmware() to parse the blob and perform the actual upload. Fully define 'struct rsp' in immap_qe.h to include the actual RISC Special Registers. Added description of a new QE firmware node to booting-without-of.txt. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* typo fixesMatt LaPlante2007-10-201-1/+1
| | | | | | | | | | | | Most of these fixes were already submitted for old kernel versions, and were approved, but for some reason they never made it into the releases. Because this is a consolidation of a couple old missed patches, it touches both Kconfigs and documentation texts. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
* Merge branch 'for-2.6.24' of git://git.secretlab.ca/git/linux-2.6-mpc52xx ↵Paul Mackerras2007-10-171-0/+4
|\ | | | | | | into merge
| * [POWERPC] bestcomm: core bestcomm support for Freescale MPC5200Sylvain Munaut2007-10-161-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the core of the BestComm API for the Freescale MPC5200(b). The BestComm engine is a microcode-controlled / tasks-based DMA used by several of the onchip devices. Setting up the tasks / memory allocation and all common low level functions are handled by this patch. The specifics details of each tasks and their microcode are split-out in separate patches. This is not the official API, but a much cleaner one. (hopefully) Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * [POWERPC] rheap: Changes config mechanismSylvain Munaut2007-10-161-0/+2
| | | | | | | | | | | | | | | | | | Instead of having in the makefile all the option that requires rheap, we define a configuration symbol and when needed we make sure it's selected. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | kconfig: syntax cleanup - drop support for "depends/requires/def_boolean"Adrian Bunk2007-10-121-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | Remove the following redundant and never or rarely used kconfig syntax: - "def_boolean" (same as "def_bool") - "requires" (same as "depends on") - "depends" (same as "depends on") This patch contains the code changes and Kconfig updates. The shipped files are in next patch to let actual codechange stand out. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* [POWERPC] Add early debug console for CPM serial ports.Scott Wood2007-10-031-0/+4
| | | | | | | | | This code assumes that the ports have been previously set up, with buffers in DPRAM. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Introduce new CPM device bindings.Scott Wood2007-10-031-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | This introduces a new device binding for the CPM and other devices on these boards. Some of the changes include: 1. Proper namespace scoping for Freescale compatibles and properties. 2. Use compatible rather than things like device_type and model to determine which particular variant of a device is present. 3. Give the drivers the relevant CPM command word directly, rather than requiring it to have a lookup table based on device-id, SCC v. SMC, and CPM version. 4. Specify the CPCR and the usable DPRAM region in the CPM's reg property. Boards that do not require the legacy bindings should select CONFIG_PPC_CPM_NEW_BINDING to enable the of_platform CPM devices. Once all existing boards are converted and tested, the config option can become default y to prevent new boards from using the old model. Once arch/ppc is gone, the config option can be removed altogether. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Move embedded6xx into multiplatformArnd Bergmann2007-10-031-4/+0
| | | | | | | | | The various embedded 6xx systems can easily coexist in one kernel together with the other 6xx based systems, so there is no strict reason to keep them separate. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
OpenPOWER on IntegriCloud