summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/configs/mpc85xx_defconfig
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/fsl/defconfig: enable CONFIG_AT803X_PHYShengzhou Liu2013-10-281-0/+1
| | | | | | | Enable CONFIG_AT803X_PHY to support AR8030/8033/8035 PHY. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/85xx: Add C293PCIE board supportMingkai Hu2013-08-231-0/+1
| | | | | | | | | | | | | | | C293PCIE board is a series of Freescale PCIe add-in cards to perform as public key crypto accelerator or secure key management module. - 512KB platform SRAM in addition to 512K L2 Cache/SRAM - 512MB soldered DDR3 32bit memory - CPLD System Logic - 64MB x16 NOR flash and 4GB x8 NAND flash - 16MB SPI flash Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Po Liu <Po.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/fsl: Enable CONFIG_DEVTMPFS_MOUNT so /dev can be mounted correctlyZhenhua Luo2013-08-071-0/+1
| | | | | | | | | | | | | | | | | | When using recent udev, the /dev node mount requires CONFIG_DEVTMPFS_MOUNT is enabled in Kernel. The patch enables the option in defconfig of Freescale QorIQ targets. Changed defconfig list: arch/powerpc/configs/85xx/p1023rds_defconfig arch/powerpc/configs/corenet32_smp_defconfig arch/powerpc/configs/corenet64_smp_defconfig arch/powerpc/configs/mpc85xx_smp_defconfig arch/powerpc/configs/mpc85xx_defconfig arch/powerpc/configs/mpc83xx_defconfig Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> [scottwood@freescale.com: added mpc83xx and non-smp mpc85xx] Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/85xx: enable Silicon image 3132 PCIe to SATA controllerRoy ZANG2013-04-111-0/+1
| | | | | | | | | | | Some 85xx board, for example, P1020RDB-PC has on board silicon image PCIe to SATA controller and when booting up, the filesystem will auto mount to the SATA disk. So enable silicon image 3132 pcie to sata controller by default Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: add CONFIG(s) require for using flash controllerPrabhakar Kushwaha2013-03-181-0/+31
| | | | | | | | | | Add CONFIG(s) required for NAND and NOR flash controller usage. It defines MTD, Jffs2 and UBIFS file system required for controllers. It also enables IFC controller Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: enable E1000 NIC to mpc85xx_defconfigRoy Zang2013-03-151-4/+4
| | | | | | | | | | | E1000 NIC is a common used Ethernet card. Enable it as default for mpc85xx platform. other change is due to make savedefconfig Reported-by: Fu Jiwei <b36666@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: introduce support for the Freescale / iVeia P1022RDKTimur Tabi2012-09-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | The Freescale / iVeia P1022RDK reference board is a small-factor board with a Freescale P1022 SOC. It includes: 1) 512 MB 64-bit DDR3-800 (max) memory 2) 8MB SPI serial flash memory for boot loader 3) Bootable 4-bit SD/MMC port 4) Two 10/100/1000 Ethernet connectors 5) One SATA port 6) Two USB ports 7) One PCIe x4 slot 8) DVI video connector 9) Audio input and output jacks, powered by a Wolfson WM8960 codec. Unlike the P1022DS, the P1022RDK does not have any localbus devices, presumably because of the localbus / DIU multiplexing restriction of the P1022 SOC. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl: fix "Failed to mount /dev: No such device" errorsKim Phillips2012-08-231-0/+1
| | | | | | | | | | | | Yocto (Built by Poky 7.0) 1.2 root filesystems fail to boot, at least over nfs, with: Failed to mount /dev: No such device Configuring DEVTMPFS fixes it. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl: update defconfigsKim Phillips2012-08-231-24/+7
| | | | | | | run make savedefconfig on fsl defconfigs. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: mpc85xx_defconfig - add VIA PATA support for MPC85xxCDSZhao Chenhui2012-08-101-0/+1
| | | | | Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Enable MTD/NOR/NAND options by default in defconfigShengzhou Liu2012-07-101-0/+24
| | | | | | | | Enable MTD/NOR/NAND options by default in mpc85xx_defconfig and mpc85xx_smp_defconfig to support NOR, NAND flash. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge tag 'v3.4-rc2' into for-3.5Mark Brown2012-04-091-0/+1
|\ | | | | | | | | Linux 3.4-rc2 contains some bug fixes we need, including the addition of an export for regcache_sync_region().
| * Merge remote-tracking branch 'kumar/next' into mergeBenjamin Herrenschmidt2012-04-021-0/+1
| |\
| | * powerpc/85xx: Enable I2C_CHARDEV and I2C_MPC options in defconfigsShaveta Leekha2012-03-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Enable I2C char dev interface for user space testing of I2C controler. Enable the I2C driver on 64-bit builds (corenet64_smp_defconfig) as it was missing. Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | ASoC: imx: merge sound/soc/imx into sound/soc/fslShawn Guo2012-04-011-0/+1
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | Freescale PowerPC and ARM/IMX families share the same SSI IP block. The patch merges sound/soc/imx into sound/soc/fsl, so that the possible code sharing and consolidation can happen. This is a plain merge, except that menuconfig SND_POWERPC_SOC is added in Kconfig for PowerPC platform as a correspondence to SND_IMX_SOC for IMX platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | irqdomain/powerpc: updated defconfigs for VIRQ_DEBUG renameGrant Likely2012-03-291-1/+1
|/ | | | Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* powerpc/85xx: allow CONFIG_PHYS_64BIT to be selectableTimur Tabi2012-03-161-0/+1
| | | | | | | | | | | | | | | | | | Remove the "select PHYS_64BIT" from the Kconfig entry for the P1022DS, so that large physical address support is a selectable option for non-CoreNet reference boards. The option is enabled in mpc85xx_[smp_]defconfig so that the default is unchanged. However, now it can be deselected. The P1022DS had this option defined because the default device tree for this board uses 36-bit addresses. This had the side-effect of forcing this option on for all boards that use mpc85xx_[smp_]defconfig. Some users may want to disable this feature to create an optimized configuration for boards with <= 2GB of RAM. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl: Update defconfigs to enable some standard FSL HW featuresKumar Gala2012-01-041-5/+11
| | | | | | | | | | | | | | | | corenet64_smp_defconfig: - enabled rapidio corenet32_smp_defconfig: - enabled hugetlbfs, rapidio mpc85xx_smp_defconfig: - enabled P1010RDB, hugetlbfs, SPI, SDHC, Crypto/CAAM mpc85xx_smp_defconfig: - enabled hugetlbfs, SPI, SDHC, Crypto/CAAM Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Enable Hugetlb by default for 32-bit 85xx/corenetBecky Bruce2011-12-071-0/+1
| | | | | Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Update mpc85xx/corenet 32-bit defconfigsBecky Bruce2011-10-111-4/+1
| | | | | | | Results from updates via make savedefconfig. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* gpio: move mpc8xxx/512x gpio driver to drivers/gpioWolfram Sang2011-09-231-1/+1
| | | | | | | | | | | | | | Move the driver to the place where it is expected to be nowadays. Also rename its CONFIG-name to match the rest and adapt the defconfigs. Finally, move selection of REQUIRE_GPIOLIB or WANTS_OPTIONAL_GPIOLIB to the platforms, because this option is per-platform and not per-driver. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* powerpc/85xx: enable the audio drivers in the defconfigsTimur Tabi2011-08-301-0/+1
| | | | | | | | Enable the audio drivers in the non-corenet 85xx defconfigs so that audio is enabled on the Freescale P1022DS reference board. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add P1010RDB board supportPrabhakar Kushwaha2011-06-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | P1010RDB Overview ----------------- 1Gbyte DDR3 (on board DDR) 32Mbyte 16bit NOR flash 32Mbyte SLC NAND Flash 256 Kbit M24256 I2C EEPROM 128 Mbit SPI Flash memory I2C Board 128x8 bit memory SD/MMC connector to interface with the SD memory card 2 SATA interface 1 internal SATA connect to 2.5. 160G SATA2 HDD 1 eSATA connector to rear panel USB 2.0 x1 USB 2.0 port: connected via a UTMI PHY to Mini-AB interface. x1 USB 2.0 port: directly connected to Mini-AB interface Ethernet eTSEC1: Connected to RGMII PHY VSC8641XKO eTSEC2: Connected to SGMII PHY VSC8221 eTSEC3: Connected to SGMII PHY VSC8221 eCAN Two DB-9 female connectors for Field bus interface UART DUART interface: supports two UARTs up to 115200 bps for console display Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: enable the framebuffer console for the defconfigsTimur Tabi2011-06-271-0/+4
| | | | | | | | | Enable framebuffer console support by default in the defconfigs for the Freescale 85xx-based reference board. This allows the boot messages to be shown on the video display on the P1022DS. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add basic P1023RDS board supportRoy Zang2011-06-221-5/+2
| | | | | | | | | | The P1023 processor is an e500v2 based SoC that utilizes the DPAA networking architecture. This adds basic board support for non-DPAA functionality (device tree, board file, etc). Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl: enable verbose bug outputScott Wood2011-05-191-1/+0
| | | | | | | | | | This debug option has no overhead other than a slight increase in kernel size, and makes bug reports more useful. While some end users may prefer to save the space, as a default on a kernel config aimed primarily at development on reference boards, it should be enabled. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Restore some misc devices to our configsStephen Rothwell2011-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | Uwe Kleine-König reported: while working on an defconfig (arm/mx27) I noticed that just updating it[1] results in removing CONFIG_EEPROM_AT24=y. The reason is that since commit v2.6.36-5965-g5f2365d (misc devices: do not enable by default) MISC_DEVICES isn't enabled anymore by default. So all defconfigs that have CONFIG_SOME_SYMBOL=y (or =m) (with SOME_SYMBOL depending on MISC_DEVICES) but not CONFIG_MISC_DEVICES=y suffer from the same problem. This restores those misc devices to the powerpc defconfigs. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Uwe Kleine-König Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes2011-01-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* powerpc/85xx: add DIU support to the Freecale P1022DS reference boardTimur Tabi2010-10-141-0/+3
| | | | | | | | | | | | | | The Freescale P1022DS has an on-chip video controller called the DIU, and a driver for this device already exists. Update the platform file for the P1022DS reference board to enable the driver, and update the defconfig for Freescale MPC85xx boards to add the driver. [Edited to resolve header add/add conflict and drop #define DEBUG. -- broonie] Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* powerpc: Trim defconfigsBenjamin Herrenschmidt2010-08-091-1688/+1
| | | | | | This trims all our defconfigs using make savedefconfig Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/85xx: Introduce support for the Freescale P1022DS reference boardTimur Tabi2010-08-041-22/+12
| | | | | | | | | | | | | | Introduce basic support for the Freescale P1022DS reference board, based on the Freescale BSP for this board. This patch excludes the DIU, SSI, and MMC/SD drivers. Only a 36-bit DTS is provided. Update mpc86xx_smp_defconfig and mpc85xx_defconfig to support the P1022DS. This means enabling 64-bit physical address support, increasing the maximum zone order to 12 (to allow the DIU driver to allocate large chunks), and clean up the audio options to disable the deprecated OSS support. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: 2.6.34 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxxKumar Gala2010-04-191-18/+41
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/mpc8xxx defconfigs - turn off SYSFS_DEPRECATEDKim Phillips2010-04-191-2/+1
| | | | | | | | | | | | | | | a recent fc11 udev update on an 83xx board made root console login disappear: Updating : udev-141-8.fc11.ppc 32/83 udev: starting version 141 udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly and sure enough, turning off SYSFS_DEPRECATED brings the login prompt back. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: 2.6.33 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxxKumar Gala2010-01-061-23/+74
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: 2.6.32 update of defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxxKumar Gala2009-11-051-29/+53
| | | | | | | | | Updated mpc85xx_{smp_}defconfig to enable: * XES_MPC85xx board * PCI MSI * RapidIO Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/8xxx: enable IPsec ESP by default on mpc83xx/mpc85xxKim Phillips2009-11-051-8/+8
| | | | | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add support for P2020RDB boardPoonam Aggrwal2009-08-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the P2020RDB reference board from Freescale. Overview of P2020RDB platform - DDR DDR2 1G - NOR Flash 16MByte - NAND Flash 32MByte - 3 Ethernet interfaces 1) etSEC1 - RGMII - connected to a 5 port Vitesse Switch(VSC7385) - Switch is memory mapped through eLBC interface(CS#2) - IRQ1 2) etSEC2 - SGMII - connected to VSC8221 - IRQ2 3) etSEC3 - RGMII - connected to VSC8641 - IRQ3 - 2 1X PCIe interfaces - SD/MMC ,USB - SPI EEPROM - Serial I2C EEPROM Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Update defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxxKumar Gala2009-07-291-103/+90
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Enabled a bunch of FSL specific drivers/optionsKumar Gala2009-04-211-16/+27
| | | | | | | | | | | | * Add new 85xx boards * Added QE/FSL gpio * Enabled PHY drivers that exist on various boards * Enabled FS_ENET & UCC ethernet drivers (CPM2 & QE) * FSL HW Crypto Engine * CPM I2C * QE Serial Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Updated generic mpc85xx_defconfigKumar Gala2009-04-211-125/+88
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge commit 'kumar/kumar-merge' into mergeBenjamin Herrenschmidt2009-01-281-31/+89
|\
| * powerpc/85xx: Update defconfigsKumar Gala2009-01-261-31/+89
| | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | eeprom: More consistent symbol namesJean Delvare2009-01-261-2/+2
|/ | | | | | | | | | | | Now that all EEPROM drivers live in the same place, let's harmonize their symbol names. Also fix eeprom's dependencies, it definitely needs sysfs, and is no longer experimental after many years in the kernel tree. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net>
* powerpc: Updated Freescale PPC related defconfigsKumar Gala2008-11-081-24/+121
| | | | | | | unset CONFIG_PCI_LEGACY in the defconfigs as none of them enable ISDN drivers which seem to be the only place we are using pci_find_device Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Update defconfigs for FSL PPC boardsKumar Gala2008-08-211-77/+130
| | | | | | | | Since we are updated defconfigs I went ahead and moved the asp8347_defconfig under 83xx/ and the mpc8536_ds_defconfig under 85xx/ as that is where they should have been to start with. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: fix ALSA options in Freescale 85xx and 86xx defconfigsTimur Tabi2008-07-161-3/+5
| | | | | | | | | The defconfigs for Freescale 85xx and 86xx SOCs had bad choices for some audio related options. In particular, OSS emulation should be enabled, and the old ALSA API should be disabled. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Updated Freescale PPC defconfigsKumar Gala2008-06-091-74/+156
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Fix defconfigs so we dont set both GENRTC and RTCLIBKumar Gala2008-03-311-8/+3
| | | | | | | The new rtc subsystem conflicts with genrtc so don't enable GENRTC if RTCLIB is enabled. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Update some defconfigsKumar Gala2008-03-241-35/+76
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 85xx: rework platform KconfigKumar Gala2008-01-281-0/+1523
* Allow multiple boards to be selected in a single build * Removed Kconfig option '85xx' which existed only for compat with arch/ppc * Added a multiplatform 85xx defconfig (mpc85xx_defconfig). This builds all 85xx boards except sbc8560 and stx_gp3 since these to boards have board specific ifdef in driver code that may break all other boards Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
OpenPOWER on IntegriCloud