summaryrefslogtreecommitdiffstats
path: root/arch/blackfin
Commit message (Collapse)AuthorAgeFilesLines
* Blackfin arch: Remove outdated codeMichael Hennerich2009-02-041-23/+1
| | | | | | | | | | | | | | The removed version with the loop registers saved on the stack was originally intended to workaround the missing toolchain support for LoopReg Clobbers. Since our toolchain now supports these there is no point in keeping this workaround. And since we don't touch LoopRegs anymore we're no longer subject for ANOMALY_05000312. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: Fix udelay implementationMichael Hennerich2009-02-041-6/+5
| | | | | | | | | Avoid possible overflow during 32*32->32 multiplies. Reported-by: Marco Reppenhagen <marco.reppenhagen@auerswald.de> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: Update Copyright informationMichael Hennerich2009-02-041-1/+1
| | | | | | Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: Add BF561 PPI POLS, POLC MasksMichael Hennerich2009-02-041-0/+2
| | | | | | Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: Update CM-BF527 kernel configMichael Hennerich2009-02-041-124/+321
| | | | | | Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: define bfin_memmap as static since it is only used hereMike Frysinger2009-02-041-1/+1
| | | | | | Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: cplb mananger: use a do...while loop rather than a for loopMike Frysinger2009-02-041-4/+8
| | | | | | | | | | | use a do...while loop rather than a for loop to get slightly better optimization and to avoid gcc "may be used uninitialized" warnings ... we know that the [id]cplb_nr_bounds variables will never be 0, so this is OK Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: fix bug - traps test case 19 for exception 0x2d failsBernd Schmidt2009-02-041-3/+1
| | | | | | | | | | | Enable null pointer checking for ICPLBs. The code was there but for some reason I had commented it out at some stage during development. Should restrict this to 1K since atomic ops start there. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: add platform device bfin_mii-bus and KSZ8893M switch driver ↵Graf Yang2009-02-0410-0/+105
| | | | | | | | platform resources to board files Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: build jtag tty driver as a module by defaultMike Frysinger2009-02-049-9/+9
| | | | | | Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: fix 2 bugs related to debugJie Zhang2009-02-041-8/+1
| | | | | | | | | | | | - unable to single step over emuexcpt instruction - gdbproxy goes into infinite loop when doing gdb does "next" over "emuexcpt" Don't decrement PC after software breakpoint. Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: Add ANOMALY_05000380 to BF54x to kill the compile warningBryan Wu2009-02-041-0/+1
| | | | | Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: Fix bug - 561 SMP kernel can't boot from jffs2Graf Yang2009-02-041-42/+42
| | | | | | | | | bss_l2 section is garbage when the data in this section is used by _bfin_relocate_l1_mem, so move the zero out function ahead. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: base SIC_IWR# programming on whether the MMR existsMike Frysinger2009-02-042-14/+8
| | | | | | | | | base SIC_IWR# programming on whether the MMR exists rather than having to maintain another list of processors Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: read SYSCR on newer parts that mirror the bits of SWRST in itMike Frysinger2009-02-041-0/+6
| | | | | | Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: fixup board init function nameMike Frysinger2009-02-046-12/+12
| | | | | | Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: drop CONFIG_I2C_BOARDINFO ifdefsMike Frysinger2009-02-048-42/+0
| | | | | | | | | Drop CONFIG_I2C_BOARDINFO ifdefs as the common i2c header handles this already by stubbing things out Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: bfin_reset->_bfin_reset redirection no longer neededMike Frysinger2009-02-041-7/+1
| | | | | | Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: sync reboot handler with version in u-bootMike Frysinger2009-02-041-11/+15
| | | | | | Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: Faster Implementation of csum_tcpudp_nofold()Michael Hennerich2009-02-041-17/+17
| | | | | | | | | | | Avoid conditional branch instructions during carry bit additions. Special thanks to Bernd. Simplify: Use ((len + proto) << 8) like every other __LITTLE_ENDIAN__ machine Cc: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: Fix bug - BF518 port F, G, and H have different mux offset ↵Graf Yang2009-02-041-5/+12
| | | | | | | | | | | compare to BF527 [Mike Frysinger <vapier.adi@gmail.com>: keep the ifdef nest down] Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: Add in cflag to support mlong-calls for kgdb_testGrace Pan2009-02-041-0/+2
| | | | | | Signed-off-by: Grace Pan <grace.pan@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: Fix bug - Run "reboot" hangs bf518-ezbrdSonic Zhang2009-02-0416-15/+19
| | | | | | | | | | | | | | [Mike Frysinger <vapier.adi@gmail.com>: - setup P_DEFAULT_BOOT_SPI_CS for every arch based on the default bootrom behavior and convert all our boards to it - revert previous anomaly change ... bf51x is not affected by anomaly 05000353] Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: Add ability to count and display number of NMI interruptsRobin Getz2009-02-042-1/+8
| | | | | | Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: Add a few more instructions that can cause the trace buffer ↵Robin Getz2009-02-041-0/+12
| | | | | | | | to be discontiguous Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: Fix URLRobin Getz2009-02-041-1/+1
| | | | | | Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: cleanup bf54x ifdef mess in gpio codeMike Frysinger2009-02-043-409/+208
| | | | | | | | | merge more of the bf54x and !bf54x gpio code together to cut down on #ifdef mess Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: Add one more check on `fp' to prevent double faultJie Zhang2009-02-041-5/+3
| | | | | | Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: explicit add a might sleep to gpio_freeUwe Kleine-Koenig2009-02-041-0/+2
| | | | | | | | | | | | | | | According to the documentation gpio_free should only be called from task context only. To make this more explicit add a might sleep to all implementations. This patch changes the gpio_free implementations for the blackfin architecture. Signed-off-by: Uwe Kleine-Koenig <ukleinek@strlen.de> Cc: David Brownell <david-b@pacbell.net> Acked-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* Blackfin arch: don't accidently re-enable interruptsRobin Getz2009-02-041-6/+13
| | | | | | | | | Make sure we don't accidently re-enable interrupts if we are being called in atomic context Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: Print out where the bootmode is coming from (for easier ↵Robin Getz2009-02-041-0/+2
| | | | | | | | debugging). Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: reset POLAR setting when acquiring a gpio for the first timeMichael Hennerich2009-02-041-1/+7
| | | | | | | | | | | | | | | | | | | | | when requesting a GPIO for the first time, the POLAR setting is not set to a sane state. this can lead to indeterminate behavior that cannot be resolved without an explicit write to the Blackfin port POLAR register. when requesting a GPIO for the first time via gpio_request(), the POLAR setting for the GPIO in question should be set to sane state. this should occur if the GPIO has not been allocated in any other way. some examples: - when doing something like "request_irq(); gpio_request();" on the same GPIO, the POLAR setting should not be reset. - when doing "gpio_request(); gpio_request();" on the same GPIO, the POLAR setting should be reset only the first time and not the second. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: Fix Bug - request lines with peripheral_request_list, but ↵Michael Hennerich2009-02-041-3/+0
| | | | | | | | | | | don't get freed with peripheral_free_list Remove erroneous check_gpio(ident) in peripheral_free() Reported-by: Michael McTernan <mmcternan@airvana.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: Fix Bug - Kernel does not boot if re-program clocksMichael Hennerich2009-02-042-2/+3
| | | | | | | | | | On BF561 EBIU_SDGCTL bit 31 controls the SDRAM external data path width, typically set 0 for a 32-bit bus width. On other Blackfin derivatives this bit should be set by default. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: fix bug - Dmacopy failed in BF537-STAMPMike Frysinger2009-02-041-0/+7
| | | | | | | | | | | Dmacopy failed in BF537-STAMP when copy from SRAM to SDRAM and kernel will reboot automatically. Fixing by doing a SSYNC before mucking with DMA registers Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: enable bfin_eth in bf51x by defaultSonic Zhang2009-02-041-1/+6
| | | | | | Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: line up machine-/cpu- vars after BF54xM additionMike Frysinger2009-02-041-48/+48
| | | | | | Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: add support for mobile ddr bf54x partsMike Frysinger2009-02-043-11/+63
| | | | | | Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: scrub comments/whitespace/cvs keywordsMike Frysinger2009-02-041-38/+15
| | | | | | Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* eeprom: More consistent symbol namesJean Delvare2009-01-2617-36/+36
| | | | | | | | | | | | Now that all EEPROM drivers live in the same place, let's harmonize their symbol names. Also fix eeprom's dependencies, it definitely needs sysfs, and is no longer experimental after many years in the kernel tree. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net>
* byteorder: make swab.h include asm/swab.h like a regular headerHarvey Harrison2009-01-142-2/+0
| | | | | | | | | Add swab.h to kbuild.asm and remove the individual entries from each arch, mark as unifdef as some arches have some kernel-only bits inside. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* NOMMU: Make VMAs per MM as for MMU-mode linuxDavid Howells2009-01-083-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make VMAs per mm_struct as for MMU-mode linux. This solves two problems: (1) In SYSV SHM where nattch for a segment does not reflect the number of shmat's (and forks) done. (2) In mmap() where the VMA's vm_mm is set to point to the parent mm by an exec'ing process when VM_EXECUTABLE is specified, regardless of the fact that a VMA might be shared and already have its vm_mm assigned to another process or a dead process. A new struct (vm_region) is introduced to track a mapped region and to remember the circumstances under which it may be shared and the vm_list_struct structure is discarded as it's no longer required. This patch makes the following additional changes: (1) Regions are now allocated with alloc_pages() rather than kmalloc() and with no recourse to __GFP_COMP, so the pages are not composite. Instead, each page has a reference on it held by the region. Anything else that is interested in such a page will have to get a reference on it to retain it. When the pages are released due to unmapping, each page is passed to put_page() and will be freed when the page usage count reaches zero. (2) Excess pages are trimmed after an allocation as the allocation must be made as a power-of-2 quantity of pages. (3) VMAs are added to the parent MM's R/B tree and mmap lists. As an MM may end up with overlapping VMAs within the tree, the VMA struct address is appended to the sort key. (4) Non-anonymous VMAs are now added to the backing inode's prio list. (5) Holes may be punched in anonymous VMAs with munmap(), releasing parts of the backing region. The VMA and region structs will be split if necessary. (6) sys_shmdt() only releases one attachment to a SYSV IPC shared memory segment instead of all the attachments at that addresss. Multiple shmat()'s return the same address under NOMMU-mode instead of different virtual addresses as under MMU-mode. (7) Core dumping for ELF-FDPIC requires fewer exceptions for NOMMU-mode. (8) /proc/maps is now the global list of mapped regions, and may list bits that aren't actually mapped anywhere. (9) /proc/meminfo gains a line (tagged "MmapCopy") that indicates the amount of RAM currently allocated by mmap to hold mappable regions that can't be mapped directly. These are copies of the backing device or file if not anonymous. These changes make NOMMU mode more similar to MMU mode. The downside is that NOMMU mode requires some extra memory to track things over NOMMU without this patch (VMAs are no longer shared, and there are now region structs). Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Mike Frysinger <vapier.adi@gmail.com> Acked-by: Paul Mundt <lethal@linux-sh.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2009-01-07268-9970/+30744
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (171 commits) Blackfin arch: fix bug - BF527 0.2 silicon has different CPUID (DSPID) value Blackfin arch: Enlarge flash partition for kenel for bf533/bf537 boards Blackfin arch: fix bug: kernel crash when enable SDIO host driver Blackfin arch: Print FP at level KERN_NOTICE Blackfin arch: drop ad73311 test code Blackfin arch: update board default configs Blackfin arch: Set PB4 as the default irq for bf548 board v1.4+. Blackfin arch: fix typo in early printk bit size processing Blackfin arch: enable reprogram cclk and sclk for bf518f-ezbrd Blackfin arch: add SDIO host driver platform data Blackfin arch: fix bug - kernel stops at initial console Blackfin arch: fix bug - kernel crash after config IP for ethernet port Blackfin arch: add sdh support for bf518f-ezbrd Blackfin arch: fix bug - kernel detects BF532 incorrectly Blackfin arch: add () to avoid warnings from gcc Blackfin arch: change HWTRACE Kconfig and set it on default Blackfin arch: Clean oprofile build path for blackfin Blackfin arch: remove hardware PM code, oprofile not use it Blackfin arch: rewrite get_sclk()/get_vco() Blackfin arch: cleanup and unify the ins functions ...
| * Blackfin arch: fix bug - BF527 0.2 silicon has different CPUID (DSPID) valueRobin Getz2009-01-071-3/+3
| | | | | | | | | | | | | | | | | | BF523/5/7 == 27e0 (all revs) BF522/4/6 == 27e4 (all revs) Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
| * Blackfin arch: Enlarge flash partition for kenel for bf533/bf537 boardsGrace Pan2009-01-072-6/+6
| | | | | | | | | | | | Signed-off-by: Grace Pan <grace.pan@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
| * Blackfin arch: fix bug: kernel crash when enable SDIO host driverMike Frysinger2009-01-071-0/+10
| | | | | | | | | | | | | | | | | | update bfin-sdh platform data to fix this issue. Pointed-out-by: Dominik Herwald <d.herwald@dsh-elektronik.de> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
| * Blackfin arch: Print FP at level KERN_NOTICEJie Zhang2009-01-071-1/+1
| | | | | | | | | | | | Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
| * Blackfin arch: drop ad73311 test codeMike Frysinger2009-01-071-3/+0
| | | | | | | | | | | | | | | | drop ad73311 test code, this can be done easily from userspace Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
| * Blackfin arch: update board default configsSonic Zhang2009-01-0721-1254/+2603
| | | | | | | | | | | | | | Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
| * Blackfin arch: Set PB4 as the default irq for bf548 board v1.4+.Sonic Zhang2009-01-071-1/+1
| | | | | | | | | | | | Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
OpenPOWER on IntegriCloud