summaryrefslogtreecommitdiffstats
path: root/arch/arm
Commit message (Collapse)AuthorAgeFilesLines
* arm/PCI: convert to pci_scan_root_bus() for correct root bus resourcesBjorn Helgaas2012-01-0621-111/+104
| | | | | | | | | | Convert from pci_scan_bus() to pci_scan_root_bus() and remove root bus resource fixups. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. CC: Russell King <linux@arm.linux.org.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: ARM: convert pcibios_set_master() to a non-inlined functionMyron Stowe2012-01-063-12/+10
| | | | | | | | | | | | | | | | | | | | | | | This patch converts ARM's architecture-specific inlined 'pcibios_set_master()' routine to a non-inlined function. This will allow follow on patches to create a generic 'pcibios_set_master()' function using the '__weak' attribute which can be used by all architectures as a default which, if necessary, can then be over- ridden by architecture-specific code. Converting 'pci_bios_set_master()' to a non-inlined function will allow ARM's 'pcibios_set_master()' implementation to remain architecture- specific after the generic version is introduced and thus, not change current behavior. Note that ARM also has a non-inlined 'pcibios_set_master()' that is used if CONFIG_PCI_HOST_ITE8152 is defined. This patch does not change any behavior here either. No functional change. Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'fixes' of ↵Linus Torvalds2011-12-303-71/+55
|\ | | | | | | | | | | | | | | | | | | | | http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7237/1: PL330: Fix driver freeze ARM: 7197/1: errata: Remove SMP dependency for erratum 751472 ARM: 7196/1: errata: Remove SMP dependency for erratum 720789 ARM: 7220/1: mmc: mmci: Fixup error handling for dma ARM: 7214/1: mmc: mmci: Fixup handling of MCI_STARTBITERR
| * ARM: 7237/1: PL330: Fix driver freezeJavi Merino2011-12-231-67/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a req_running field to the pl330_thread to track which request (if any) has been submitted to the DMA. This mechanism replaces the old one in which we tried to guess the same by looking at the PC of the DMA, which could prevent the driver from sending more requests if it didn't guess correctly. Reference: <1323631637-9610-1-git-send-email-javi.merino@arm.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: 7197/1: errata: Remove SMP dependency for erratum 751472Dave Martin2011-12-232-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Activation conditions for a workaround should not be encoded in the workaround's direct dependencies if this makes otherwise reasonable configuration choices impossible. This patches uses the SMP/UP patching facilities instead to compile out the workaround if the configuration means that it is definitely not needed. This means that configs for buggy silicon can simply select ARM_ERRATA_751472, without preventing a UP kernel from being built or duplicatiing knowledge about when to activate the workaround. This seems the correct way to do things, because the erratum is a property of the silicon, irrespective of what the kernel config happens to be. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: 7196/1: errata: Remove SMP dependency for erratum 720789Dave Martin2011-12-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Activation conditions for a workaround should not be encoded in the workaround's direct dependencies if this makes otherwise reasonable configuration choices impossible. The workaround for erratum 720789 only affects a code path which is not active in UP kernels; hence it should be safe to turn on in UP kernels, without penalty. This patch simply removes the extra dependency on SMP from Kconfig. This means that configs for buggy silicon can simply select ARM_ERRATA_720789, without preventing a UP kernel from being built or duplicatiing knowledge about when to activate the workaround. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'fixes' of ↵Linus Torvalds2011-12-3010-28/+46
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: plat-orion: make gpiochip label unique enable uncompress log on cpuimx35sd cpuimx35: fix touchscreen support cpuimx35sd: fix Kconfig clock-imx35: fix reboot in internal boot mode dma: MX3_IPU fix depends imx_v4_v5_defconfig: update default configuration cpuimx25sd: fix Kconfig arm/imx: fix cpufreq section mismatch ARM:imx:fix pwm period value ARM: OMAP: hwmod data: fix iva and mailbox hwmods for OMAP 3
| * \ Merge branch 'fixes-hwmod-regression' of ↵Olof Johansson2011-12-201-4/+0
| |\ \ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
| | * | ARM: OMAP: hwmod data: fix iva and mailbox hwmods for OMAP 3Felipe Contreras2011-12-151-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Seems the commit 7e89098 was overly aggressive in adding iva and mailbox hwmods so now they are registered twice. ------------[ cut here ]------------ WARNING: at arch/arm/mach-omap2/omap_hwmod.c:1959 omap_hwmod_register+0x104/0x12c() omap_hwmod: iva: _register returned -22 Modules linked in: [<c0012aa4>] (unwind_backtrace+0x0/0xec) from [<c002f970>] (warn_slowpath_common+0x4c/0x64) [<c002f970>] (warn_slowpath_common+0x4c/0x64) from [<c002fa08>] (warn_slowpath_fmt+0x2c/0x3c) [<c002fa08>] (warn_slowpath_fmt+0x2c/0x3c) from [<c02fdb4c>] (omap_hwmod_register+0x104/0x12c) [<c02fdb4c>] (omap_hwmod_register+0x104/0x12c) from [<c02fbb44>] (omap3_init_early+0x1c/0x28) [<c02fbb44>] (omap3_init_early+0x1c/0x28) from [<c02f9580>] (setup_arch+0x6b8/0x7a4) [<c02f9580>] (setup_arch+0x6b8/0x7a4) from [<c02f754c>] (start_kernel+0x6c/0x264) [<c02f754c>] (start_kernel+0x6c/0x264) from [<80008040>] (0x80008040) ---[ end trace 1b75b31a2719ed1c ]--- ------------[ cut here ]------------ WARNING: at arch/arm/mach-omap2/omap_hwmod.c:1959 omap_hwmod_register+0x104/0x12c() omap_hwmod: mailbox: _register returned -22 Modules linked in: [<c0012aa4>] (unwind_backtrace+0x0/0xec) from [<c002f970>] (warn_slowpath_common+0x4c/0x64) [<c002f970>] (warn_slowpath_common+0x4c/0x64) from [<c002fa08>] (warn_slowpath_fmt+0x2c/0x3c) [<c002fa08>] (warn_slowpath_fmt+0x2c/0x3c) from [<c02fdb4c>] (omap_hwmod_register+0x104/0x12c) [<c02fdb4c>] (omap_hwmod_register+0x104/0x12c) from [<c02fbb44>] (omap3_init_early+0x1c/0x28) [<c02fbb44>] (omap3_init_early+0x1c/0x28) from [<c02f9580>] (setup_arch+0x6b8/0x7a4) [<c02f9580>] (setup_arch+0x6b8/0x7a4) from [<c02f754c>] (start_kernel+0x6c/0x264) [<c02f754c>] (start_kernel+0x6c/0x264) from [<80008040>] (0x80008040) ---[ end trace 1b75b31a2719ed1d ]--- Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
| * | | ARM: plat-orion: make gpiochip label uniqueHolger Brunck2011-12-191-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The former implementation adds a fix gpiochip label string to the framework. This is confusing because orion_gpio_init is called more than once and this ends up in different gpiochips with the same label. This patch adds the already present orion_gpio_chip_count to the label string to make it unique in the system. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Cc: Lennert Buytenhek <kernel@wantstofly.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | enable uncompress log on cpuimx35sdEric Bénard2011-12-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | | cpuimx35: fix touchscreen supportEric Bénard2011-12-191-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | | cpuimx35sd: fix KconfigEric Bénard2011-12-192-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | in 0d6cfa3a75f5cde5b3ca0dde748fd22625b4f34c I fixed the mach-types records. We also need to make the name consistent in Kconfig else the machine_is_eukrea_cpuimx35sd macro fails, and thus audio codec is not properly initalized. Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | | clock-imx35: fix reboot in internal boot modeEric Bénard2011-12-191-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 8d75a26 "ARM: mx35: use generic function for displaying silicon revision" disabled IIM clock after reading silicon revision which will prevent reboot in internal boot mode. Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Jason Liu <jason.hui@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | | imx_v4_v5_defconfig: update default configurationEric Bénard2011-12-191-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - add new machine APF9328 - update CPUIMX25 -> CPUIMX25SD - add drivers : - MXC nand driver - DM9000 - SMSC Phy - SPIdev - Led GPIO Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | | cpuimx25sd: fix KconfigEric Bénard2011-12-192-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | in 0d6cfa3a75f5cde5b3ca0dde748fd22625b4f34c I fixed the mach-types records. We also need to make the name consistent in Kconfig else the machine_is_eukrea_cpuimx25sd macro fails, and thus audio codec is not properly initalized. Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | | arm/imx: fix cpufreq section mismatchRichard Zhao2011-12-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WARNING: arch/arm/plat-mxc/built-in.o(.data+0x488): Section mismatch in reference from the variable mxc_driver to the function .init.text:mxc_cpufreq_init() The variable mxc_driver references the function __init mxc_cpufreq_init() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | | ARM:imx:fix pwm period valueJason Chen2011-12-191-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to imx pwm RM, the real period value should be PERIOD value in PWMPR plus 2. PWMO (Hz) = PCLK(Hz) / (period +2) Signed-off-by: Jason Chen <jason.chen@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable@kernel.org
* | | | Merge branch 'v3.2-samsung-fixes-4' of ↵Linus Torvalds2011-12-302-15/+15
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 'v3.2-samsung-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Remove duplicated SROMC static memory mapping ARM: SAMSUNG: Fix build error when selecting CPU_FREQ_S3C24XX_DEBUGFS on S3C2440
| * | | | ARM: EXYNOS: Remove duplicated SROMC static memory mappingThomas Abraham2011-12-281-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SROMC static memory mapping is included in the common s5p initialization code. Hence, remove the duplicated SROMC static memory mapping for EXYNOS. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Cc: stable@kernel.org Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| * | | | ARM: SAMSUNG: Fix build error when selecting CPU_FREQ_S3C24XX_DEBUGFS on S3C2440Denis Kuzmenko2011-12-281-10/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following is happened when CONFIG_CPU_FREQ_S3C24XX_DEBUGFS is selected without building of s3c2410-iotiming.c file: arch/arm/mach-s3c2440/built-in.o:(.data+0x38c): undefined reference to `s3c2410_iotiming_debugfs Basically, the CONFIG_S3C2410_IOTIMING is not selected for MACH_MINI2440. Because the s3c2410-iotiming.c is not ever compiled and enabling CONFIG_CPU_FREQ_S3C24XX_DEBUGFS option caused undefined reference to s3c2410_iotiming_debugfs() defined in that file. The s3c2410_iotiming_debugfs defined as NULL for this case. Signed-off-by: Denis Kuzmenko <linux@solonet.org.ua> Cc: stable@kernel.org [kgene.kim@samsung.com: removed useless changes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* | | | | oprofile, arm/sh: Fix oprofile_arch_exit() linkage issueVladimir Zapolskiy2011-12-231-1/+1
|/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change fixes a linking problem, which happens if oprofile is selected to be compiled as built-in: `oprofile_arch_exit' referenced in section `.init.text' of arch/arm/oprofile/built-in.o: defined in discarded section `.exit.text' of arch/arm/oprofile/built-in.o The problem is appeared after commit 87121ca504, which introduced oprofile_arch_exit() calls from __init function. Note that the aforementioned commit has been backported to stable branches, and the problem is known to be reproduced at least with 3.0.13 and 3.1.5 kernels. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@nokia.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: Will Deacon <will.deacon@arm.com> Cc: oprofile-list <oprofile-list@lists.sourceforge.net> Cc: <stable@kernel.org> Link: http://lkml.kernel.org/r/20111222151540.GB16765@erda.amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | | Merge branch 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds2011-12-203-19/+139
|\ \ \ \ | |/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | * 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-sh: ARM: mach-shmobile: SH73A0 external Ethernet fix ARM: mach-shmobile: AG5EVM GIC Sparse IRQ fix ARM: mach-shmobile: Kota2 TPU LED platform data ARM: mach-shmobile: Kota2 GIC Sparse IRQ fix ARM: mach-shmobile: Kota2 PINT fix
| | | |
| | \ \
| *-. \ \ Merge branches 'rmobile/core', 'rmobile/kota2' and 'rmobile/ag5' into ↵Paul Mundt2011-11-243-18/+138
| |\ \ \ \ | | | | | | | | | | | | | | | | | | rmobile-fixes-for-linus
| | | * | | ARM: mach-shmobile: AG5EVM GIC Sparse IRQ fixMagnus Damm2011-11-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix IRQ support on the AG5EVM board. The sh73a0 and the AG5EVM board make use of the ARM GIC hardware block as main interrupt controller. The following commit changed the default behaviour for non-device tree platforms and broke AG5EVM irq support: f37a53c ARM: gic: fix irq_alloc_descs handling for sparse irq Without this fix the following warning triggers at boot: NR_IRQS:1024 nr_irqs:1024 1024 ------------[ cut here ]------------ WARNING: at arch/arm/common/gic.c:607 gic_init+0x90/0x2e4() Cannot allocate irq_descs @ IRQ16, assuming pre-allocated [<c000c868>] (unwind_backtrace+0x0/0xe0) from [<c001857c>] (warn_slowpath_commo) [<c001857c>] (warn_slowpath_common+0x48/0x60) from [<c00185d8>] (warn_slowpath_) [<c00185d8>] (warn_slowpath_fmt+0x2c/0x3c) from [<c029ee08>] (gic_init+0x90/0x2) [<c029ee08>] (gic_init+0x90/0x2e4) from [<c029f278>] (sh73a0_init_irq+0x30/0x18) [<c029f278>] (sh73a0_init_irq+0x30/0x184) from [<c029c0b4>] (init_IRQ+0x14/0x1c) [<c029c0b4>] (init_IRQ+0x14/0x1c) from [<c029a5cc>] (start_kernel+0x15c/0x2b8) [<c029a5cc>] (start_kernel+0x15c/0x2b8) from [<4000803c>] (0x4000803c) ---[ end trace 1b75b31a2719ed1c ]--- With this fix applied interrupts work as expected. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| | * | | | ARM: mach-shmobile: Kota2 TPU LED platform dataMagnus Damm2011-11-242-4/+134
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updates the Kota2 board support code to use the recently merged TPU LED driver whenever possible. The sh73a0 SoC has 5 TPU hardware blocks each with 4 timer channels which in theory allows a total of 20 LEDs to be controlled by "leds-renesas-tpu" driver instances. The Kota2 board has 4 LEDs connected to GPIO pins that also come with TPU pin functions, so this patch ties up these 4 LEDS and leaves the remaining 3 LEDS for the GPIO based LED driver. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| | * | | | ARM: mach-shmobile: Kota2 GIC Sparse IRQ fixMagnus Damm2011-11-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix IRQ support on the Kota2 board. The sh73a0 and the Kota2 board make use of the ARM GIC hardware block as main interrupt controller. The following commit changed the default behaviour for non-device tree platforms and broke Kota2 irq support: f37a53c ARM: gic: fix irq_alloc_descs handling for sparse irq Without this fix the following warning triggers at boot: NR_IRQS:1024 nr_irqs:1024 1024 ------------[ cut here ]------------ WARNING: at arch/arm/common/gic.c:607 gic_init+0x90/0x2e4() Cannot allocate irq_descs @ IRQ16, assuming pre-allocated [<c000c868>] (unwind_backtrace+0x0/0xe0) from [<c001857c>] (warn_slowpath_commo) [<c001857c>] (warn_slowpath_common+0x48/0x60) from [<c00185d8>] (warn_slowpath_) [<c00185d8>] (warn_slowpath_fmt+0x2c/0x3c) from [<c029ee08>] (gic_init+0x90/0x2) [<c029ee08>] (gic_init+0x90/0x2e4) from [<c029f278>] (sh73a0_init_irq+0x30/0x18) [<c029f278>] (sh73a0_init_irq+0x30/0x184) from [<c029c0b4>] (init_IRQ+0x14/0x1c) [<c029c0b4>] (init_IRQ+0x14/0x1c) from [<c029a5cc>] (start_kernel+0x15c/0x2b8) [<c029a5cc>] (start_kernel+0x15c/0x2b8) from [<4000803c>] (0x4000803c) ---[ end trace 1b75b31a2719ed1c ]--- With this fix applied interrupts work as expected. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| | * | | | ARM: mach-shmobile: Kota2 PINT fixMagnus Damm2011-11-241-14/+2
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support PINT on sh73a0 and Kota2 using INTC PINT macros. With this patch applied the Kota2 ethernet is handled through one of the chained sh73a0 PINT interrupt controllers. sh73a0 PINT support is included in 3.2-rc but the Kota2 board code does not make use of this shared code base without this patch. Without this patch kota2 on-board ethernet is broken. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | | ARM: mach-shmobile: SH73A0 external Ethernet fixMagnus Damm2011-11-241-1/+1
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Keep the ZB clock enabled on sh73a0 to allow the BSC to access external peripherals hooked up to CS signals. This is needed to unbreak Ethernet support on sh73a0 boards such as AG5EVM and Kota2 together with the following patch: 794d78f drivers: sh: late disabling of clocks V2 Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | | | Merge branch 'fixes' of ↵Linus Torvalds2011-12-1611-13/+26
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: OMAP: rx51: fix USB ARM: OMAP: mcbsp: Fix possible memory corruption arm/imx: fix power button on imx51 babbage board ARM: imx: fix cpufreq build errors ARM: mx5: add __initconst for fec pdata MXC PWM: should active during DOZE/WAIT/DBG mode ARM: EXYNOS: Fix build error without CONFIG_LOCAL_TIMERS ARM: EXYNOS: Fix for stall in case of cpu hotplug or sleep ARM: S5PV210: Set 1000ns as PWM backlight period on SMDKV210 ARM: SAMSUNG: remove duplicated header include
| * \ \ \ Merge branch 'samsung-fixes-3' of ↵Olof Johansson2011-12-153-4/+11
| |\ \ \ \ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
| | * | | | ARM: EXYNOS: Fix build error without CONFIG_LOCAL_TIMERSKukjin Kim2011-12-081-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arch/arm/mach-exynos/mct.c: In function 'exynos4_timer_resources': arch/arm/mach-exynos/mct.c:450: error: 'exynos4_mct_tick_isr' undeclared (first use in this function) arch/arm/mach-exynos/mct.c:450: error: (Each undeclared identifier is reported only once arch/arm/mach-exynos/mct.c:450: error: for each function it appears in.) make[1]: *** [arch/arm/mach-exynos/mct.o] Error 1 Reported-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Marc Zyngier <marc.zyngier@arm.com>
| | * | | | ARM: EXYNOS: Fix for stall in case of cpu hotplug or sleepAmit Daniel Kachhap2011-12-081-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds remove_irq in place of disable_irq which is correct equivalent function for setup_irq used in exynos4_mct_tick_init. Signed-off-by: Amit Daniel Kachhap <amit.kachhap@linaro.org> Tested-by: Inderpal Singh <inderpal.singh@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | | | ARM: S5PV210: Set 1000ns as PWM backlight period on SMDKV210Jingoo Han2011-12-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SMDK board uses LT3591 as backlight LED driver of LTE480WV LCD. According to the LT3591 datasheet, the switching frequency should be 1MHz. So, PWM period is calculated by following formula: PWM period = 1/switching frequency = 1/1MHz = 1000ns Thus, the PWM backlight period should be 1000ns. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | | | ARM: SAMSUNG: remove duplicated header includeJingoo Han2011-12-081-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes duplicated slab header for pwm backlight. arch/arm/plat-samsung/dev-backlight.c: slab.h is included more than once. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| * | | | | Merge branch 'fixes' of ↵Olof Johansson2011-12-152-4/+4
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
| | * | | | | ARM: OMAP: rx51: fix USBFelipe Contreras2011-12-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 10299e2e4e3ed3b16503d4e04edd48b33083f4e2 (ARM: RX-51: Enable isp1704 power on/off) added power management for isp1704. However, the transceiver should be powered on by default, otherwise USB doesn't work at all for networking during boot. All kernels after v3.0 are affected. Cc: stable@kernel.org Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Reviewed-by: Sebastian Reichel <sre@debian.org> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | | | ARM: OMAP: mcbsp: Fix possible memory corruptionJarkko Nikula2011-12-121-3/+3
| | | |_|/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commits 09d28d ("ARM: OMAP: mcbsp: Start generalize omap2_mcbsp_set_clks_src") and 7bc0c4 ("ARM: OMAP: mcbsp: Start generalize signal muxing functions") incorrectly set two struct omap_mcbsp_platform_data fields after omap_device_build_ss and kfree calls. Fix this by moving these pdata assignments before those calls. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Reported-by: NeilBrown <neilb@suse.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | Merge branch 'imx-fixes-for-arnd' of ↵Arnd Bergmann2011-12-136-5/+11
| |\ \ \ \ \ | | |/ / / / | |/| | | | | | | | | | git://git.pengutronix.de/git/imx/linux-2.6 into fixes
| | * | | | arm/imx: fix power button on imx51 babbage boardShawn Guo2011-12-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 6571534 (plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired) was in, the power button on imx51 babbage board stopped working because it's pulled up by mistake. The patch removes the pull-up setting from the pad configuration for that gpio to make the power button back to work. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | | ARM: imx: fix cpufreq build errorsRichard Zhao2011-12-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CC arch/arm/plat-mxc/cpufreq.o arch/arm/plat-mxc/cpufreq.c:203: error: expected declaration specifiers or '...' before string constant arch/arm/plat-mxc/cpufreq.c:203: warning: data definition has no type or storage class arch/arm/plat-mxc/cpufreq.c:203: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' arch/arm/plat-mxc/cpufreq.c:203: warning: function declaration isn't a prototype arch/arm/plat-mxc/cpufreq.c:204: error: expected declaration specifiers or '...' before string constant arch/arm/plat-mxc/cpufreq.c:204: warning: data definition has no type or storage class arch/arm/plat-mxc/cpufreq.c:204: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' arch/arm/plat-mxc/cpufreq.c:204: warning: function declaration isn't a prototype arch/arm/plat-mxc/cpufreq.c:205: error: expected declaration specifiers or '...' before string constant arch/arm/plat-mxc/cpufreq.c:205: warning: data definition has no type or storage class arch/arm/plat-mxc/cpufreq.c:205: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' arch/arm/plat-mxc/cpufreq.c:205: warning: function declaration isn't a prototype make[1]: *** [arch/arm/plat-mxc/cpufreq.o] Error 1 make: *** [arch/arm/plat-mxc] Error 2 Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | | ARM: mx5: add __initconst for fec pdataDong Aisheng2011-12-093-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | | MXC PWM: should active during DOZE/WAIT/DBG modeJason Chen2011-12-091-1/+6
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jason Chen <jason.chen@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable@kernel.org
* | | | | ARM: unwinder: fix bisection to find origin in .idx sectionUwe Kleine-König2011-12-151-2/+2
| |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bisection implemented in unwind_find_origin() stopped to early. If there is only a single entry left to check the original code just took the end point as origin which might be wrong. This was introduced in commit de66a979012d ("ARM: 7187/1: fix unwinding for XIP kernels"). Reported-and-tested-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | Merge branch 'fixes' of ↵Linus Torvalds2011-12-135-66/+99
|\ \ \ \ | |/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7204/1: arch/arm/kernel/setup.c: initialize arm_dma_zone_size earlier ARM: 7185/1: perf: don't assign platform_device on unsupported CPUs ARM: 7187/1: fix unwinding for XIP kernels ARM: 7186/1: fix Kconfig issue with PHYS_OFFSET and !MMU
| * | | ARM: 7204/1: arch/arm/kernel/setup.c: initialize arm_dma_zone_size earlierArnaud Patard2011-12-111-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arm_dma_zone_size is used by arm_bootmem_free() which is called by paging_init(). Thus it needs to be set before calling it. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: stable@kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | ARM: 7185/1: perf: don't assign platform_device on unsupported CPUsWill Deacon2011-12-061-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the unlikely case that a platform registers a PMU platform_device when running on a CPU that is unsupported by perf, we will encounter a NULL dereference when trying to assign the platform_device to the cpu_pmu structure. This patch checks that the CPU is supported by perf before assigning the platform_device. Reported-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | ARM: 7187/1: fix unwinding for XIP kernelsUwe Kleine-König2011-12-063-59/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The linker places the unwind tables in readonly sections. So when using an XIP kernel these are located in ROM and cannot be modified. For that reason the current approach to convert the relative offsets in the unwind index to absolute addresses early in the boot process doesn't work with XIP. The offsets in the unwind index section are signed 31 bit numbers and the structs are sorted by this offset. So it first has offsets between 0x40000000 and 0x7fffffff (i.e. the negative offsets) and then offsets between 0x00000000 and 0x3fffffff. When seperating these two blocks the numbers are sorted even when interpreting the offsets as unsigned longs. So determine the first non-negative entry once and track that using the new origin pointer. The actual bisection can then use a plain unsigned long comparison. The only thing that makes the new bisection more complicated is that the offsets are relative to their position in the index section, so the key to search needs to be adapted accordingly in each step. Moreover several consts are added to catch future writes and rename the member "addr" of struct unwind_idx to "addr_offset" to better match the new semantic. (This has the additional benefit of breaking eventual users at compile time to make them aware of the change.) In my tests the new algorithm was a tad faster than the original and has the additional upside of not needing the initial conversion and so saves some boot time and it's possible to unwind even earlier. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | ARM: 7186/1: fix Kconfig issue with PHYS_OFFSET and !MMUNicolas Pitre2011-12-061-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 1b9f95f8ade9 (ARM: prepare for removal of a bunch of <mach/memory.h> files) introduced CONFIG_PHYS_OFFSET but the Kconfig hex prompt did not provide a default value. This has the undesired side effect of breaking a reportedly used trick for updating defconfigs on the fly for routine buildtesting across all arch and all platforms, i.e. cp /path/to/somedefconfig .config ; yes "" | make oldconfig because the config system will endlessly loop until a valid address is provided. However we can't just pick a random default value since it is likely to be wrong for the majority of the boards as the right answer for this option is quite varied. So the fact that the config system insists on having a proper value be entered is actually a good thing. It turns out that only at91x40_defconfig has this problem because it has CONFIG_MMU=n. However, in the !MMU case, there is already a CONFIG_DRAM_BASE value that can be used here. So let's use that as a default in that case and suppress the redundant CONFIG_PHYS_OFFSET prompt. Eventually the DRAM_BASE config option could simply be replaced by PHYS_OFFSET directly, but that's a larger change better suited for later. Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | Merge branch 'iommu/fixes' of ↵Linus Torvalds2011-12-091-0/+1
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu * 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: MAINTAINERS: Update amd-iommu F: patterns iommu/amd: Fix typo in kernel-parameters.txt iommu/msm: Fix compile error in mach-msm/devices-iommu.c Fix comparison using wrong pointer variable in dma debug code
OpenPOWER on IntegriCloud