summaryrefslogtreecommitdiffstats
path: root/arch/arm
Commit message (Collapse)AuthorAgeFilesLines
* OMAP1: Amstrad Delta: add FIQ handler for serial keyboardport interrupt ↵Janusz Krzysztofik2010-05-054-0/+361
| | | | | | | | | | | | | | | | | | | | | processing This patch introduces a Fast Interrupt Request (FIQ) handler for Amstrad Delta (E3) videophone. The handler's purpose is to process interrupts generated by a GPIO line that a serial keyboard clock hangs off. It collects consecutive bits into words, pushing them into a buffer, then requests a higher level interrupt after one or more words are ready for further processing by a keyboard port driver. The handler also processes interrupts generated by two other GPIO lines, used by other on-board supported devices, by simply requesting a higher level interrupt, that in turn should invoke those device's specific irq handlers. IRQ12 line, not used by OMAP1510 hardware (described as reserved), has been choosen as a higher level interrupt source. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: add missing FIQ_START definition required forarch/arm/kernel/fiq.c ↵Janusz Krzysztofik2010-05-051-0/+4
| | | | | | | | | | | | | | | | compilation Several ARM platforms/machines that use FIQ define their value of FIQ_START. Since FIQ is not implemented for OMAP yet, this definition is missing from OMAP header files. Put an arbitrary value for FIQ_START into plat/irqs.h for OMAP. Even if not used by the FIQ handler for Amstrad Delta, this is required for successfull compilation of arch/arm/plat-omap/fiq.c that provides several usefull functions. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap2/3/4: Disable CONFIG_FB_OMAP in omap3_defconfigTony Lindgren2010-05-051-9/+1
| | | | | | | | | | | | | Looks like CONFIG_FB_OMAP prevents somehow mounting root on MMC at least on zoom3 for multi-omap. Disable CONFIG_FB until the omap FB code is fixed. This allows booting omap3_defconfig on various omaps. Tested on 2420-n8x0, 3430-n900, 3630-zoom3 and 4430-blaze. Note that n8x0 still has issues with starting user space because of TLS and VFP. Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap2/3/4: Disable CONFIG_PM_VERBOSE in omap3_defconfigTony Lindgren2010-05-041-1/+1
| | | | | | It's too noisy. Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap2/3/4: Update PMIC options for TWL and Menelaus chipsTony Lindgren2010-05-041-6/+7
| | | | | | | | These are needed for mounting root on MMC on many boards. Also disable CONFIG_WATCHDOG_NOWAYOUT, that can keep the system from running with external watchdogs. Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap2/3/4: Make omap3_defconfig usable on Nokia boardsTony Lindgren2010-05-041-2/+2
| | | | | | | | | | | | | | | | | The bootloader on Nokia boards does not support updating the kernel cmdline. For the other boards, the bootloader provided cmdline will be used instead. To mount root on n8x0, compile in also the MMC_OMAP. It seems that the best way to mount root with the new kernels on Nokia boards is to mount root on mmcblk0p2. Note that n8x0 current has several issues booting with omap3_defconfig: The bootloader has a 2MB limit for loading kernels, so you may want to use kexec. Also ARMv6 does not currently work with ARMv7 for VFP and TLS. Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap2/3/4: Add new boards to omap3_defconfigTony Lindgren2010-05-041-2/+3
| | | | | | Enable 2430 omaps and the missing boards. Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap4: Fix multiboot with CONFIG_PM and CONFIG_ARCH_OMAP3 selectedTony Lindgren2010-05-041-1/+15
| | | | | | | | | | | | We cannot use the omap34xx_sram_init(). It needs to be implemented for omap4. Otherwise we get an error and the system won't boot: Unhandled fault: imprecise external abort (0x1406) at 0xea963e94 ... Fix this by adding a dummy omap44xx_sram_init(). Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap3: Remove non-muxable ball entries for 3630Tony Lindgren2010-05-041-86/+0
| | | | | | | | | | | | These are currently non-muxable, so let's save some memory and remove them. Otherwise we get the following warnings: mux: Unknown ball offset 0x5e mux: Unknown ball offset 0x60 mux: Unknown ball offset 0x62 ... Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap3: Fix compile for board-cm-t35Tony Lindgren2010-05-041-0/+1
| | | | | | | | | Otherwise we can get the following error: error: variable 'tdo24m_mcspi_config' has initializer but incomplete type ... Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap2/3: Fix DEBUG_LL for omap zoom2/3Tony Lindgren2010-05-036-8/+17
| | | | | | | | | | | | | | | | | Zoom2 and 3 have UARTs only on the external debug board. GPMC needs to be mapped early to use it for DEBUG_LL. Additionally, 0xfb000000 overlaps with other areas, so use 0xfa400000 for the virtual address instead. Note that with the pending serial.c patches you need to set console=ttyS0,115200n8 as it will be the only UART mapped. To use DEBUG_LL, you need to pass also earlyprintk in cmdline. Cc: Allen Pais <allen.pais@ti.com> Acked-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: Use a memory address for storing the debug port info instead of UART1 ↵Tony Lindgren2010-05-034-47/+43
| | | | | | | | | | | | | | | | | | | | | | scratchpad This removes the dependency to the UART1 being available for storing the debug configuration in uncompress.h. This will simplify the DEBUG_LL UART configuration for boards that may not have UART1, or have an external UART as it requires only one mapping for DEBUG_LL. The patch has a few limitations. Basically now we're assuming that the kernel uncompress code won't overlap with OMAP_UART_INFO. We also assume the printascii is called at least once before paging_init in order for addruart to have a chance to read the UART setup from OMAP_UART_INFO. As suggested by Cyril Chemparathy <cyril@ti.com>, Vikram Pandita <vikram.pandita@ti.com> and Kevin Hilman <khilman@deeprootsystems.com>. Based on an earlier patch posted for Davinci by Cyril Chemparathy <cyril@ti.com>. Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap2/3/4: Fix multi.h when omap3 and omap4 are selected without omap2Tony Lindgren2010-05-031-4/+12
| | | | | | | | | | | Otherwise we'll get an error about get_irqnr_and_base being defined twice. Add an entry for omap4, and use ARCH_OMAP3 for omap3 instead of ARCH_OMAP3430. Also fix the check for omap1 to use ARCH_OMAP2PLUS to avoid having to add ARCH_OMAP4 separately there. Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2010-04-2922-112/+189
|\ | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6061/1: PL061 GPIO: Bug fix - setting gpio for HIGH_LEVEL interrupt is not working. ARM: 5957/1: ARM: RealView SD/MMC Card detection and write-protect using GPIOLIB ARM: 6030/1: KS8695: enable console ARM: 6060/1: PL061 GPIO: Setting gpio val after changing direction to OUT. ARM: 6059/1: PL061 GPIO: Changing *_irq_chip_data with *_irq_data for real irqs. ARM: 6023/1: update bcmring_defconfig to latest version and fix build error ARM: fix build error in arch/arm/kernel/process.c
| * ARM: 5957/1: ARM: RealView SD/MMC Card detection and write-protect using GPIOLIBColin Tuckley2010-04-282-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | The switch to using GPIOLIB broke the sd/mmc card detection on the RealView development boards if GPIO_PL061 was not selected. This patch selects GPIO_PL061 if GPIOLIB is selected. The sense of the return value from mmc_status has also changed and is corrected. Signed-off-by: Colin Tuckley <colin.tuckley@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: 6023/1: update bcmring_defconfig to latest version and fix build errorLeo Chen2010-04-221-25/+101
| | | | | | | | | | | | | | | | update bcmring_defconfig to the latest kernel version, this will fix the KAutobuild error. Signed-off-by: Leo Hao Chen <leochen@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: fix build error in arch/arm/kernel/process.cRussell King2010-04-2119-86/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | /tmp/ccJ3ssZW.s: Assembler messages: /tmp/ccJ3ssZW.s:1952: Error: can't resolve `.text' {.text section} - `.LFB1077' This is caused because: .section .data .section .text .section .text .previous does not return us to the .text section, but the .data section; this makes use of .previous dangerous if the ordering of previous sections is not known. Fix up the other users of .previous; .pushsection and .popsection are a safer pairing to use than .section and .previous. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds2010-04-2734-124/+113
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (39 commits) omap: delete unused bootloader tag variables omap: Devkit8000: Remove unused pins omap: Devkit8000: Change position of init calls omap: Devkit8000: Remove unnecessary include file omap: Devkit8000: Fix typo in pin name omap: Devkit8000: Add missing package selection omap: Devkit8000: Fix typo in supplies n8x0_defconfig: remove CONFIG_NILFS2_FS override omap: board-sdp-flash.c: Fix typos in debug output omap4: Fix McBSP4 base address omap: rx51_defconfig: Remove CONFIG_SYSFS_DEPRECATED*=y options omap: rx51_defconfig: Remove duplicate phonet omap: fix a gpmc nand problem AM3517: initialize i2c subsystem after mux subsystem omap: remove one of the define of INT_34XX_BENCH_MPU_EMUL omap: fix the compile error if CONFIG_MTD_NAND_OMAP2 is notenabled OMAP4: Clocks: Change SPI Instance Names omap: Devkit8000: Fix wrong usb port on Devkit8000 OMAP4: Fix for CONTROL register Base OMAP4-HSMMC: FIX for MMC5 Controller IRQ Base ...
| * omap: delete unused bootloader tag variablesAaro Koskinen2010-04-231-3/+0
| | | | | | | | | | | | | | They are not needed and add over 512 bytes to kernel data. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: Devkit8000: Remove unused pinsThomas Weber2010-04-231-20/+0
| | | | | | | | | | | | | | | | Old code from original patch contains beagle board pins that are not available on the Devkit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: Devkit8000: Change position of init callsThomas Weber2010-04-231-4/+4
| | | | | | | | | | | | | | Change position of calling serial and ethernet initialization. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: Devkit8000: Remove unnecessary include fileThomas Weber2010-04-231-1/+0
| | | | | | | | | | | | | | Remove include otg.h. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: Devkit8000: Fix typo in pin nameThomas Weber2010-04-231-2/+2
| | | | | | | | | | | | | | Replace wrong sdr_cke[01] with sdrc_cke[01]. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: Devkit8000: Add missing package selectionThomas Weber2010-04-231-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | Devkit8000 uses the CUS package for OMAP3530. This patch adds missing package selection for CUS and enables CONFIG_MUX. Replace whitespace with tab in Kconfig. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: Devkit8000: Fix typo in suppliesThomas Weber2010-04-231-1/+1
| | | | | | | | | | | | | | Replace wrong vdss_dsi with vdds_dsi. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * n8x0_defconfig: remove CONFIG_NILFS2_FS overrideFrancisco Alecrim2010-04-231-1/+0
| | | | | | | | | | | | | | | | arch/arm/configs/n8x0_defconfig:1061:warning: override: reassigning to symbol NILFS2_FS Signed-off-by: Francisco Alecrim <francisco.alecrim@openbossa.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: board-sdp-flash.c: Fix typos in debug outputThomas Weber2010-04-231-4/+4
| | | | | | | | | | | | | | | | | | Corrected type of flash in output (OneNAND => NOR). Removed whitespace after newline in output. Removed double whitespace in output. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap4: Fix McBSP4 base addressSantosh Shilimkar2010-04-231-1/+1
| | | | | | | | | | | | | | This patch fixes the McBSP4 base address for OMAP4 Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: rx51_defconfig: Remove CONFIG_SYSFS_DEPRECATED*=y optionsJarkko Nikula2010-04-231-2/+0
| | | | | | | | | | | | | | | | | | Modern udev will not work with the CONFIG_SYSFS_DEPRECATED*=y options and it seems also that the Maemo release works without when testing with the Maemo 2.6.28 kernel. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: rx51_defconfig: Remove duplicate phonetJarkko Nikula2010-04-231-1/+0
| | | | | | | | | | | | | | | | | | Phonet is enabled by the commit bce54fed941e03695ab557100a4bd1e457abca42 and this duplicate gives a warning when doing make rx51_defconfig. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: fix a gpmc nand problemstanley.miao2010-04-231-0/+3
| | | | | | | | | | | | | | | | If gpmc_t isn't given, we don't need to set timing for gpmc, or it will cause a Oops. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * AM3517: initialize i2c subsystem after mux subsystemstanley.miao2010-04-231-2/+2
| | | | | | | | | | | | | | | | The initialize of i2c subsystem will set pinmux, so it should be done after the initialize of mux subsystem initialization. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: remove one of the define of INT_34XX_BENCH_MPU_EMULstanley.miao2010-04-231-2/+0
| | | | | | | | | | | | | | INT_34XX_BENCH_MPU_EMUL was defined twice, another is at Line 312. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: fix the compile error if CONFIG_MTD_NAND_OMAP2 is notenabledstanley.miao2010-04-231-0/+7
| | | | | | | | | | | | | | | | If CONFIG_MTD_NAND_OMAP2 is not enabled, there will be a compile error, "gpmc_nand_init() is not defined". Add a inline noop function to fix it. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * OMAP4: Clocks: Change SPI Instance NamesAbraham Arce2010-04-231-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Change the name for the spi instances on omap44xx_clks to match the names omap2 spi driver gives: omap-mcspi.1 -> omap2_mcspi.1 omap-mcspi.2 -> omap2_mcspi.2 omap-mcspi.3 -> omap2_mcspi.3 omap-mcspi.4 -> omap2_mcspi.4 Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: Devkit8000: Fix wrong usb port on Devkit8000Thomas Weber2010-04-231-2/+2
| | | | | | | | | | | | | | | | Disable the nonexistent ehci port on Devkit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * OMAP4: Fix for CONTROL register BaseSantosh Shilimkar2010-04-231-1/+1
| | | | | | | | | | | | | | | | | | This patch fixes the base address of CONTROL register on OMAP4430SDP. The control base is used by peripherals like MMC1 for PBIAS configuration. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * OMAP4-HSMMC: FIX for MMC5 Controller IRQ Basekishore kadiyala2010-04-231-1/+1
| | | | | | | | | | | | | | This patch fixes HSMMC Controller5 IRQ Base. Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap3: Fix EHCI port for IGEP v2 boardEnric Balletbo i Serra2010-04-231-4/+4
| | | | | | | | | | | | | | | | IGEP v2 uses EHCI port 1 instead of EHCI port 2. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: Fix n8x0 mmc_mmc_init compile warnings and typosTony Lindgren2010-04-231-9/+9
| | | | | | | | | | | | | | Fix warning: 'return' with a value, in function returning void in n8x0_mmc_init. Also fix a search and replace typo. Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap2: Fix ARM processor check for 24xxTony Lindgren2010-04-231-1/+1
| | | | | | | | | | | | | | | | The value to check is 7 for V6 instead. The code has been working as it falls through to 24xx code if the other checks fail. Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap4: Fix build break when used with gcc-4.4.1 (2009-q3)Richard Woodruff2010-04-232-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds argument to smc calls as gcc-4.4.1 requires it otherwise the build breaks with 2009-q3 toolchanin. arch/arm/mach-omap2/omap-headsmp.S: Assembler messages: arch/arm/mach-omap2/omap-headsmp.S:36: Error: missing expression -- `smc' arch/arm/mach-omap2/omap-headsmp.S:55: Error: missing expression -- `smc' arch/arm/mach-omap2/omap-headsmp.S:63: Error: missing expression -- `smc' make[1]: *** [arch/arm/mach-omap2/omap-headsmp.o] Error 1 Signed-off-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: DMA: Init CDAC to zeromanjugk manjugk2010-04-221-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | The register DMA4_CDAC needs to be initialized to zero before starting DMA transfer. Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Govindraj R <govindraj.raja@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Reported-by:S, Venkatraman <svenkatr@ti.com> Signed-off-by: Manjunatha GK <manjugk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: gpio: fix incorrect matching of IRQ_TYPE_EDGE_BOTHJanusz Krzysztofik2010-04-221-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Since IRQ_TYPE_EDGE_BOTH is defined as (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING), testing against it with a bitwise AND also matches both single-edge cases in addition to the intended both edges case. Fix it, replacing with a more accurate expression. Created and tested againts linux-2.6.34-rc3. Applicable to 2.6.33-stable as well. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * arm: omap1: remove dead code from timer32k.cFelipe Balbi2010-04-221-15/+0
| | | | | | | | | | | | | | Trivial patch, no functional changes Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: fix clocksource_32k to start from zeroAaro Koskinen2010-04-221-5/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the 32k sync timer is used for sched_clock(), it should count time from the kernel boot (clocksource init) instead of the last HW reset. Otherwise printk.time values will jump suddenly during the boot: [ 0.000000] calling omap2_clk_arch_init+0x0/0x138 @ 1 [ 0.000000] initcall omap2_clk_arch_init+0x0/0x138 returned -22 after 0 usecs [ 0.000000] initcall omap2_clk_arch_init+0x0/0x138 returned with error code -22 [ 0.000000] calling omap_init_clocksource_32k+0x0/0x98 @ 1 [ 508.697937] initcall omap_init_clocksource_32k+0x0/0x98 returned 0 after 0 usecs [ 508.697967] calling omap_init_devices+0x0/0x38 @ 1 [ 508.698425] initcall omap_init_devices+0x0/0x38 returned 0 after 0 usecs This will confuse tools such as scripts/bootgraph.pl. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * Merge branch 'for_2.6.34rc_a' of git://git.pwsan.com/linux-2.6 into ↵Tony Lindgren2010-04-2117-39/+113
| |\ | | | | | | | | | omap-fixes-for-linus
| | * OMAP3: clock: fix enable bit used for dpll4_m4x2 clockRanjith Lohithakshan2010-03-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The enable bit for dpll4_m4x2 clock should be OMAP3430_PWRDN_DSS1_SHIFT. The code erroneously uses OMAP3430_PWRDN_CAM_SHIFT which is meant for dpll4_m5x2 clock. This came into notice during a recent review of the clock tree. Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | * OMAP4: prcm: Use logical OR instead of bitwise ORRajendra Nayak2010-03-313-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes usage of bitwise OR in if conditions, and instead uses logical OR. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: Abhijit Pagare <abhijitpagare@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | * OMAP: HWMOD: Bug fixes in hwmod structure definitionsThara Gopinath2010-03-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch corrects the width of sysc_flags in hwmod sysconfig structure where the values to be stored to this variable exceed the current field width. Signed-off-by: Thara Gopinath <thara@ti.com> [paul@pwsan.com: edited to apply; rearranged structure members to pack] Signed-off-by: Paul Walmsley <paul@pwsan.com>
OpenPOWER on IntegriCloud