summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/clock3xxx_data.c
Commit message (Collapse)AuthorAgeFilesLines
* ARM: OMAP3: clock data: fill in some missing clockdomainsPaul Walmsley2012-04-041-0/+6
| | | | | | | | | Several clocks are missing clockdomains. This can cause problems with the hwmod and power management code. Fill these in. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Matt Porter <mporter@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com>
* ARM: OMAP AM3517/3505: clock data: change EMAC clocks aliasesIlya Yanok2012-04-041-2/+2
| | | | | | | | | | | | | Rename EMAC clocks to match driver expectations: both davinci_emac and davinci_mdio drivers call clk_get(dev, NULL) so we have to provide ("davinci_emac", NULL) and ("davinci_mdio.0", NULL) clocks instead of ("davinci_emac", "emac_clk") and ("davinci_emac", "phy_clk") resp. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Tested-by: Yegor Yefremov <yegorslists@googlemail.com> Tested-by: Matt Porter <mporter@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* ARM: OMAP3xxx: clock data: fix DPLL4 CLKSEL masksGrazvydas Ignotas2012-04-041-4/+4
| | | | | | | | | | | | | | | | | | | Commit 2a9f5a4d455 "OMAP3 clock: remove unnecessary duplicate of dpll4_m2_ck, added for 36xx" consolidated dpll4 clock structures between 34xx and 36xx, but left 34xx CLKSEL masks for most dpll4 related clocks, which causes clock code to not behave correctly when booting on DM3730 with higher (36xx only) divisors set: [ 0.000000] WARNING: at arch/arm/mach-omap2/clkt_clksel.c:375 omap2_init_clksel_parent+0x104/0x114() [ 0.000000] clock: dpll4_m3_ck: init parent: could not find regval 0 [ 0.000000] WARNING: at arch/arm/mach-omap2/clkt_clksel.c:194 omap2_clksel_recalc+0xd4/0xe4() [ 0.000000] clock: Could not find fieldval 0 for clock dpll4_m3_ck parent dpll4_ck Fix this by switching to 36xx masks, as valid divisors will be limited by clksel_rate lists. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* ARM: create a common IOMEM definitionRob Herring2012-03-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several platforms create IOMEM defines for casting to 'void __iomem *', and other platforms are incorrectly using __io() macro for the same purpose. This creates a common definition and removes all the platform specific versions. Rather than try to make linux/io.h and asm/io.h assembly safe, the assembly version of IOMEM is moved into asm/assembler.h. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Paul Walmsley <paul@pwsan.com> Acked-by: Viresh Kumar <viresh.kumar@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Colin Cross <ccross@android.com> Cc: Olof Johansson <olof@lixom.net> Cc: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
* ARM: OMAP2+: Move most of plat/io.h into local iomap.hTony Lindgren2012-02-241-1/+2
| | | | | | | | | | | | There's no need to have these defines in plat/io.h. Note that we now need to ifdef omap_read/write calls as they will be available for omap1 only. While at it, clean up the includes to group them like they typically are grouped. Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-01-091-14/+12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver specific changes Again, a lot of platforms have changes in here: pxa, samsung, omap, at91, imx, ... * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: sa1100: clean up of the clock support ARM: pxa: add dummy clock for sa1100-rtc RTC: sa1100: support sa1100, pxa and mmp soc families RTC: sa1100: remove redundant code of setting alarm RTC: sa1100: Clean out ost register Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq() pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq() ARM: EXYNOS: Modified files for SPI consolidation work ARM: S5P64X0: Enable SDHCI support ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names ARM: S5P64X0: Add HSMMC setup for host Controller ARM: EXYNOS: Add USB OHCI support to ORIGEN board USB: Add Samsung Exynos OHCI diver ARM: EXYNOS: Add USB OHCI support to SMDKV310 board ARM: EXYNOS: Add USB OHCI device net: macb: fix build break with !CONFIG_OF i2c: tegra: Support DVC controller in device tree i2c: tegra: Add __devinit/exit to probe/remove net/at91_ether: use gpio_is_valid for phy IRQ line ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT ...
| * ARM: OMAP: USB: device name change for the clk names of usbhsKeshava Munegowda2011-12-161-14/+12
| | | | | | | | | | | | | | | | | | | | device name usbhs clocks are changed from usbhs-omap.0 to usbhs_omap; this is because in the hwmod registration the device name is set as usbhs_omap; The redudant clock nodes are removed. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Reviewed-by: Partha Basak <parthab@india.ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* | Merge tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-01-091-0/+11
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New feature development This adds support for new features, and contains stuff from most platforms. A number of these patches could have fit into other branches, too, but were small enough not to cause too much confusion here. * tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) mfd/db8500-prcmu: remove support for early silicon revisions ARM: ux500: fix the smp_twd clock calculation ARM: ux500: remove support for early silicon revisions ARM: ux500: update register files ARM: ux500: register DB5500 PMU dynamically ARM: ux500: update ASIC detection for U5500 ARM: ux500: support DB8520 ARM: picoxcell: implement watchdog restart ARM: OMAP3+: hwmod data: Add the default clockactivity for I2C ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1 ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP4 ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3 ARM: OMAP: hwmod data: Add support for AM35xx UART4/ttyO3 ARM: Orion: Remove address map info from all platform data structures ARM: Orion: Get address map from plat-orion instead of via platform_data ARM: Orion: mbus_dram_info consolidation ARM: Orion: Consolidate the address map setup ARM: Kirkwood: Add configuration for MPP12 as GPIO ARM: Kirkwood: Recognize A1 revision of 6282 chip ARM: ux500: update the MOP500 GPIO assignments ...
| * ARM: OMAP: hwmod data: Add support for AM35xx UART4/ttyO3Kyle Manna2011-12-151-0/+11
| | | | | | | | | | | | | | | | | | | | Add hwmod support to enable access to UART4 of the AM35xx series of chips. The UART4 device referenced from the TRM will show up as ttyO3. This was tested on an AM3505. Signed-off-by: Kyle Manna <kyle.manna@fuel7.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* | ARM: OMAP: TI814X: Add cpu type macros and detection supportHemant Pedanekar2011-12-131-0/+2
| | | | | | | | | | | | | | | | This patch adds cpu type, macros for identification of TI814X device. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> [tony@atomide.com: left out CK_TI814X for now] Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP: TI81XX: Prepare for addition of TI814X supportHemant Pedanekar2011-12-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updates existing macros, functions used for TI816X, to enable addition of other SoCs belonging to TI81XX family (e.g., TI814X). The approach taken is to use TI81XX/ti81xx for code/data going to be common across all TI81XX devices. cpu_is_ti81xx() is introduced to handle code common across TI81XX devices. In addition, ti8168_evm_map_io() is now replaced with ti81xx_map_io() and moved in mach-omap2/common.c as same will be used for TI814X and is not board specific. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP: am33xx: Update common OMAP machine specific sourcesAfzal Mohammed2011-12-131-0/+2
|/ | | | | | | | | | | | | This patch updates the common machine specific source files for support for AM33XX/AM335x with cpu type, macros for identification of AM33XX/AM335X device. Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> [tony@atomide.com: updated for map_io and common.h changes, dropped CK_AM33XX] Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: clock data: Remove redundant timer clkdevBenoit Cousson2011-11-041-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | The commit 318c3e15cd55c73a26ae22a65a8183655b3003f9 added some "fck" clock alias to timer devices that are not needed anymore since hwmod framework will create them automatically. A warning was added to highlight and thus fix the redundancy. [ 0.616424] omap_timer.1: alias fck already exists [ 0.621948] omap_timer.2: alias fck already exists [ 0.627380] omap_timer.3: alias fck already exists [ 0.632781] omap_timer.4: alias fck already exists [ 0.638214] omap_timer.5: alias fck already exists [ 0.643615] omap_timer.6: alias fck already exists [ 0.649078] omap_timer.7: alias fck already exists [ 0.654479] omap_timer.8: alias fck already exists [ 0.659881] omap_timer.9: alias fck already exists [ 0.665283] omap_timer.10: alias fck already exists [ 0.670776] omap_timer.11: alias fck already exists Remove all the clkdev entries for timer fck alias. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: dmtimer: add device names to flck nodesTarun Kanti DebBarma2011-09-211-0/+36
| | | | | | | | | | | | | Add device name to OMAP2 dmtimer fclk nodes so that the fclk nodes can be retrieved by doing a clk_get with the corresponding device pointers or device names. Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Signed-off-by: Thara Gopinath <thara@ti.com> Acked-by: Cousson, Benoit <b-cousson@ti.com> [tony@atomide.com: fixed typo in email address] Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP3: id: remove identification codes that only correspond to marketing namesPaul Walmsley2011-09-131-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | The OMAP3505/AM3505 appears to be based on the same silicon as the OMAP3517/AM3517, with some features disabled via eFuse bits. Follow the same practice as OMAP3430 and identify these devices internally as part of the OMAP3517/AM3517 family. The OMAP3503/3515/3525/3530 chips appear to be based on the same silicon as the OMAP3430, with some features disabled via eFuse bits. Identify these devices internally as part of the OMAP3430 family. Remove the old OMAP35XX_CLASS, which actually covered two very different chip families. The OMAP3503/3515/3525/3530 chips will now be covered by OMAP343X_CLASS, since the silicon appears to be identical. For the OMAP3517/AM3517 family, create a new class, OMAP3517_CLASS. Thanks to Tony Lindgren <tony@atomide.com> for some help with the second revision of this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Sanjeev Premi <premi@ti.com> Cc: Tony Lindgren <tony@atomide.com> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Abhilash Koyamangalath <abhilash.kv@ti.com>
* OMAP3: clock: indicate that gpt12_fck and wdt1_fck are in the WKUP clockdomainPaul Walmsley2011-08-221-0/+2
| | | | | | | | | | The oscillator that supplies GPT12_FCLK and WDT1_FCLK exists in the WKUP powerdomain[1]. This resolves at least one boot-time warning: omap_hwmod: gpt12_fck: missing clockdomain for gpt12_fck. 1. _OMAP34xx Multimedia High Security (HS) Device Silicon Revision 3.1.x Security Addendum Version K (SWPU119K)_ Figure 3-29. August 2010.
* OMAP: omap_device: Create clkdev entry for hwmod main_clkBenoit Cousson2011-07-101-22/+22
| | | | | | | | | | | | | | | | Extend the existing function to create clkdev for every optional clocks to add a well one "fck" alias for the main_clk of the omap_hwmod. It will allow to remove these static clkdev entries from the clockXXX_data.c file. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Todd Poynor <toddpoynor@google.com> [paul@pwsan.com: remove all of the "fck" role clkdev aliases from the clock data files; fixed error message] Signed-off-by: Paul Walmsley <paul@pwsan.com>
* Merge branch 'for-paul' of git://gitorious.org/linux-omap-dss2/linuxPaul Mundt2011-03-221-7/+7
|\ | | | | | | | | | | | | Conflicts: arch/arm/mach-omap2/board-overo.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * OMAP2PLUS: clocks: Align DSS clock names and rolesSumit Semwal2011-03-111-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, clock database has <dev, clock-name> tuples for DSS2. Because of this, the clock names are different across different OMAP platforms. This patch aligns the DSS2 clock names and roles across OMAP 2420, 2430, 3xxx, 44xx platforms in the clock databases, hwmod databases for opt-clocks, and DSS clock handling. This ensures that clk_get/put/enable/disable APIs in DSS can use uniform role names. Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * OMAP2, 3: DSS2: Move clocks from core driver to dss driverSenthilvadivu Guruswamy2011-03-111-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All clock management is moved to dss platform driver. clk_get/put APIs use dss device instead of core platform device. Hwmod adaptation design requires each of the DSS HW IP to be a platform driver. So the device name is changed from omapdss to omapdss_dss in 2420, 2430, 3xxx clock database files. Now the core driver "omapdss" only takes care of panel registration with the custom bus. core driver also uses the clk_enable() / clk_disable() APIs exposed by DSS for clock management. DSS driver would do clock management of clocks needed by DISPC, RFBI, DSI, VENC TODO: The clock content would be adapted to omap_hwmod in a seperate series. Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* | Merge branch 'omap-for-linus' of ↵Linus Torvalds2011-03-171-88/+94
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits) omap: zoom: host should not pull up wl1271's irq line arm: plat-omap: iommu: fix request_mem_region() error path OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 omap4: mux: Remove duplicate mux modes omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected omap4: board-omap4panda: Initialise the serial pads omap3: board-3430sdp: Initialise the serial pads omap4: board-4430sdp: Initialise the serial pads omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init omap2+: mux: Remove the use of IDLE flag omap2+: Add separate list for dynamic pads to mux perf: add OMAP support for the new power events OMAP4: Add IVA OPP enteries. OMAP4: Update Voltage Rail Values for MPU, IVA and CORE OMAP4: Enable 800 MHz and 1 GHz MPU-OPP OMAP3+: OPP: Replace voltage values with Macros OMAP3: wdtimer: Fix CORE idle transition Watchdog: omap_wdt: add fine grain runtime-pm ... Fix up various conflicts in - arch/arm/mach-omap2/board-omap3evm.c - arch/arm/mach-omap2/clock3xxx_data.c - arch/arm/mach-omap2/usb-musb.c - arch/arm/plat-omap/include/plat/usb.h - drivers/usb/musb/musb_core.h
| | \
| | \
| | \
| | \
| *---. \ Merge remote branches 'remotes/origin/pwrdm_clkdm_b_2.6.39', ↵Paul Walmsley2011-03-101-88/+94
| |\ \ \ \ | | | | |/ | | | | | | | | | | 'remotes/origin/pwrdm_add_can_lose_context_fns_2.6.39', 'remotes/origin/omap_device_a_2.6.39', 'remotes/origin/mmc_a_2.6.39', 'remotes/origin/hwmod_b_2.6.39', 'remotes/origin/dmtimer_a_2.6.39', 'remotes/origin/pwrdm_clkdm_a_2.6.39', 'remotes/origin/clkdm_statdep_omap4_2.6.39', 'remotes/origin/clk_a_2.6.39', 'remotes/origin/clk_autoidle_a_2.6.39', 'remotes/origin/clk_autoidle_b_2.6.39', 'remotes/origin/clk_b_2.6.39', 'remotes/origin/clk_clkdm_a_2.6.39', 'remotes/origin/misc_a_2.6.39', 'remotes/origin/for_2.6.39/omap3_hwmod_data' and 'remotes/origin/wdtimer_a_2.6.39' into tmp-integration-2.6.39-20110310-024
| | | | * OMAP: hsmmc: Rename the device and driverKishore Kadiyala2011-03-011-6/+6
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modifying the device & driver name from "mmci-omap-hs" to "omap_hsmmc". Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Acked-by: Benoit Cousson<b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | | * OMAP2+: clock: remove the DPLL rate tolerance codePaul Walmsley2011-03-071-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the DPLL rate tolerance code that is called during rate rounding. As far as I know, this code is never used, since it's been more important for callers of the DPLL round_rate()/set_rate() functions to obtain an exact rate than it is to save a relatively small amount of power. Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | | * OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocksPaul Walmsley2011-03-071-72/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mark each interface clock with a corresponding CM_AUTOIDLE bit with a clkops that has the allow_idle/deny_idle function pointers populated. This allows the OMAP clock framework to enable and disable autoidle for these clocks. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
| | | * OMAP2+: clock: disable autoidle on all clocks during clock initPaul Walmsley2011-02-251-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Disable autoidle on all clocks during clock framework initialization. (If CONFIG_PM is set, autoidle is re-enabled for all clocks later in the boot process.) The principle behind this patch, and some similar patches, is that the kernel should start with all power management features disabled. Later in the boot process, the PM code, if compiled in with CONFIG_PM, enables or re-enables power management features. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
| | | * OMAP3/4: DPLL: Add allow_idle/deny_idle support for all DPLL'sRajendra Nayak2011-02-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All OMAP3/4 dpll's support hardware level autogating. Populate allow_idle/deny_idle function pointers for all DPLL's in clkops. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | | * omap3: dpll: Populate clkops for dpll1_ckRajendra Nayak2011-02-251-1/+1
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DPLL1 on omap3 is very similar to the rest of the non-core dpll's. Hence populate clkops_omap3_noncore_dpll_ops as the clkops for it, instead of the currently populated clkops_null. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | * TI816X: Update common OMAP machine specific sourcesHemant Pedanekar2011-02-161-1/+4
| |/ | | | | | | | | | | | | | | | | This patch updates the common machine specific source files with support for TI816X. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | arm: omap: usb: clock entries for omap3 and omap4Keshava Munegowda2011-03-011-5/+14
|/ | | | | | | | | | | The devices of clocks are set to usbhs, so that only usbhs common driver can invoke these clocks. The dummy per port clocks are added to omap3 clock data base. This helps to invoke common clock get APIs for omap3 and omap4. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* omap3: clocks: Fix build error 'CK_3430ES2' undeclared hereSantosh Shilimkar2011-01-101-1/+1
| | | | | | | | | | | | | | | | | | | At latest mainline commit 0c21e3aaf6a, omap2plus build is broken. This patch is trivial fix for the missed usb clock node for CK_3430ES2PLUS flag update. CHK include/generated/compile.h CC arch/arm/mach-omap2/clock3xxx_data.o arch/arm/mach-omap2/clock3xxx_data.c:3289: error: 'CK_3430ES2' undeclared here (not in a function) make[1]: *** [arch/arm/mach-omap2/clock3xxx_data.o] Error 1 make: *** [arch/arm/mach-omap2] Error 2 Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> [tony@atomide.com: updated mask to include CK_36XX] Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'usb-next' of ↵Linus Torvalds2011-01-071-4/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (144 commits) USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) USB: serial: ftdi_sio: add support for TIOCSERGETLSR USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport USB: atmel_usba_udc: fix freeing irq in usba_udc_remove() usb: ehci-omap: fix tll channel enable mask usb: ohci-omap3: fix trivial typo USB: gadget: ci13xxx: don't assume that PAGE_SIZE is 4096 USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq's USB: gadget: update ci13xxx to work with g_ether USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers Revert "USB: musb: pm: don't rely fully on clock support" Revert "USB: musb: blackfin: pm: make it work" USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added ... Manually fix up trivial conflicts in USB Kconfig changes in: arch/arm/mach-omap2/Kconfig arch/sh/Kconfig drivers/usb/Kconfig drivers/usb/host/ehci-hcd.c and annoying chip clock data conflicts in: arch/arm/mach-omap2/clock3xxx_data.c arch/arm/mach-omap2/clock44xx_data.c
| * usb: musb: move clock handling to glue layerFelipe Balbi2010-12-101-4/+4
| | | | | | | | | | | | | | | | | | musb core doesn't need to know about platform specific details. So start moving clock handling to platform glue layer and make musb core agnostic about that. Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: musb: trivial search and replace patchFelipe Balbi2010-12-101-4/+4
| | | | | | | | | | | | | | | | | | | | change all ocurrences of musb_hdrc to musb-hdrc. We will call glue layer drivers musb-<glue layer>, so in order to keep things somewhat standard, let's change the underscore into a dash. Signed-off-by: Felipe Balbi <balbi@ti.com>
| * omap: clock: add clkdev aliases for EHCI clocksAnand Gadiyar2010-12-011-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Add clkdev aliases for the USBHOST and USBTLL clocks on OMAP3 and OMAP4, so that the driver can refer to the clocks using a common alias. This will disappear when the driver is converted to use the hwmod database, but until then this patch is needed. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Acked-by: Tony Lindgren <tony@atomide.com>
* | OMAP: clock: fix configuration of J-Type DPLLs to work for OMAP3 and OMAP4Jon Hunter2010-12-211-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | J-Type DPLLs have additional configuration parameters that need to be programmed when setting the multipler and divider for the DPLL. These parameters being the sigma delta divider (SD_DIV) for the DPLL and the digital controlled oscillator (DCO) to be used by the DPLL. The current code is implemented specifically to configure the OMAP3630 PER J-Type DPLL. The OMAP4430 USB DPLL is also a J-Type DPLL and so this code needs to be updated to work for both OMAP3 and OMAP4 devices and any other future devices that have J-TYPE DPLLs. For the OMAP3630 PER DPLL both the SD_DIV and DCO paramenters are used but for the OMAP4430 USB DPLL only the SD_DIV field is used. The current implementation will only program the SD_DIV and DCO fields if the DPLL has both and hence this does not work for OMAP4430. In order to make the code more generic add two new fields to the dpll_data structure for the SD_DIV field and DCO field bit-masks and only program these fields if the masks are defined for a specific DPLL. This simplifies the code and allows us to remove the flag DPLL_NO_DCO_SEL. Tested on OMAP36xx Zoom3 and OMAP4 Blaze. Signed-off-by: Jon Hunter <jon-hunter@ti.com> [paul@pwsan.com: removed explicit inlining and added '_' prefix on lookup_*() functions; added testing info to commit message; added 35xx comments back in] Signed-off-by: Paul Walmsley <paul@pwsan.com>
* | OMAP3: clock: Update clock domain name for mcspi fckCharulatha V2010-12-211-0/+4
| | | | | | | | | | | | | | | | Update clock3xxx_data for mcspi1-4 with appropriate clock domain name. Signed-off-by: Charulatha V <charu@ti.com> Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* | OMAP3: clock: clarify usage of struct clksel_rate.flags and struct omap_clk.cpuPaul Walmsley2010-12-211-104/+102
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clarify the usage of the struct omap_clk.cpu flags (e.g., CK_*) to use bits only for individual SoC variants (e.g., CK_3430ES1, CK_3505, etc.). Superset flags, such as CK_3XXX or CK_AM35XX, are now defined as disjunctions of individual SoC variant flags. This simplifies the definition and use of these flags. struct omap_clk record definitions can now simply specify the bitmask of actual SoCs that the records are valid for. The clock init code can simply set a single CPU type mask bit for the SoC that is currently in use, and test against that, rather than needing to set some combination of flags. Similarly, clarify the use of struct clksel_rate.flags. The bit allocated for RATE_IN_3XXX has been reassigned, and RATE_IN_3XXX has been defined as a disjunction of the 34xx and 36xx rate flags. The advantages are the same as the above. Clarify the usage of struct omap_clk.cpu flags such as CK_34XX to only apply to the SoCs that they name, e.g., OMAP34xx chips. The previous practice caused significantly different SoCs, such as OMAP36xx, to be included in CK_34XX. In my opinion, this is much more intuitive. Similarly, clarify the use of struct clksel_rate.flags, such that RATE_IN_3430ES2PLUS now only applies to 34xx chips with ES level >= 2 - it does not apply to OMAP36xx. ... At some point, it probably makes sense to collapse the CK_* and RATE_IN_* flags together into a single bitfield, and possibly use the existing CHIP_IS_OMAP* flags for platform detection. ... This all seems to work fine on OMAP34xx and OMAP36xx Beagle. Not sure if it works on Sitara or the TI816X, unfortunately I don't have any here to test with. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* | OMAP3: clock data: Add "wkup_clkdm" in sr1_fck and sr2_fckBenoit Cousson2010-12-211-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The smartreflex modules belong to an ALWON_FCLK clock domain that does not have any SW control. The gating of that interface clock is triggered by a transition of the WKUP clock domain to idle. Attach both smartreflex instances on OMAP3 to the WKUP clock domain. The missing clock domain field in srX_fck clock nodes was reported by Kevin during the discussion about smartreflex on OMAP3: https://patchwork.kernel.org/patch/199342/ Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
* | OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific filesPaul Walmsley2010-12-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation for adding OMAP4-specific PRCM accessor/mutator functions, split the existing OMAP2/3 PRCM code into OMAP2/3-specific files. Most of what was in mach-omap2/{cm,prm}.{c,h} has now been moved into mach-omap2/{cm,prm}2xxx_3xxx.{c,h}, since it was OMAP2xxx/3xxx-specific. This process also requires the #includes in each of these files to be changed to reference the new file name. As part of doing so, add some comments into plat-omap/sram.c and plat-omap/mcbsp.c, which use "sideways includes", to indicate that these users of the PRM/CM includes should not be doing so. Thanks to Felipe Contreras <felipe.contreras@gmail.com> for comments on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Acked-by: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Acked-by: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* | I2C: i2c-omap: Change device name: i2c_omap -> omap_i2cBenoit Cousson2010-12-201-6/+6
|/ | | | | | | | | | | | | | | | | The convention for omap device naming is omap_XXX. Rename the device and driver name in order to stick to this naming convention. Change device name in clock nodes as well. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Ben Dooks <ben-i2c@fluff.org> Acked-by: Paul Walmsley <paul@pwsan.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP: control: move plat-omap/control.h to mach-omap2/control.hPaul Walmsley2010-10-081-1/+1
| | | | | | | | | | | | | | | | | Only OMAP2+ platforms have the System Control Module (SCM) IP block. In the past, we've kept the SCM header file in plat-omap. This has led to abuse - device drivers including it; includes being added that create implicit dependencies on OMAP2+ builds; etc. In response, move the SCM headers into mach-omap2/. As part of this, remove the direct SCM access from the OMAP UDC driver. It was clearly broken. The UDC code needs an indepth review for use on OMAP2+ chips. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Cory Maccarrone <darkstar6262@gmail.com> Cc: Kyungmin Park <kyungmin.park@samsung.com>
* OMAP3xxx: clock: add clkdev aliases for McBSP fclk source switchingPaul Walmsley2010-10-081-0/+10
| | | | | | | | | | The OMAP3 clock tree already contains the infrastructure to support clock framework-based McBSP functional clock source switching. But it did not contain the clkdev aliases for the McBSP code to refer to the parent clocks in an SoC integration-neutral way. So, add the clkdev aliases for the parent clocks. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP clock: Add uart4_ick/fck definitions for 3630Govindraj.R2010-09-291-0/+22
| | | | | | | | | This is only valid for omap 36xx family of chips. Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* omap: crypto: updates to enable omap aesDmitry Kasatkin2010-09-271-1/+1
| | | | | | | | Updates to enable omap aes Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> [tony@atomide.com: updated to use CONFIG_ARCH_OMAP2/3 instead of old 24XX/34XX] Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP3: Fix a cpu type check problemstanley.miao2010-08-161-7/+7
| | | | | | | | | | | | | | cpu_is_omap3517() and cpu_is_omap3505() are the subgroups of cpu_is_omap34xx(), so we should check cpu_is_omap3517() and cpu_is_omap3505() first, then check cpu_is_omap34xx(). Otherwise, All AM35XX (Sitara) clocks do not get registered and device drivers (ti_hecc, etc...) that depend on those clocks are failing to get the clock and end up with non working device. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'devel-map-io' into omap-for-linusTony Lindgren2010-08-041-0/+5
|\
| * ARM: AMBA: Add pclk definition for platforms using primecellsRussell King2010-07-221-0/+5
| | | | | | | | | | | | | | | | Add a dummy clk definition for the APB pclk signal on all platforms using the AMBA bus infrastructure. This ensures that these platforms continue to work when the core amba bus code controls the APB pclk. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | OMAP3: wait on IDLEST after enabling USBTLL fclkAnand Gadiyar2010-07-261-1/+1
|/ | | | | | | | | | | | | | | | | | | We need to wait on the IDLEST bit after the clocks are enabled before attempting to access any register. Currently, the USBTLL i-clock ops uses the clkops_omap2_dflt_wait, while the USBTLL f-clock ops uses clkops_omap2_dflt. If the i-clock is enabled first, the clkops_omap2_dflt_wait is short-circuited as the companion f-clock is not enabled. This can cause a data abort if the IDLEST has not transitioned, and we try to access a USBTLL register. Since the USBTLL i-clock and f-clock could be enabled in any order, this is a bug. Fix it by changing the clkops for the f-clock. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds2010-05-211-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (46 commits) random: simplify fips mode crypto: authenc - Fix cryptlen calculation crypto: talitos - add support for sha224 crypto: talitos - add hash algorithms crypto: talitos - second prepare step for adding ahash algorithms crypto: talitos - prepare for adding ahash algorithms crypto: n2 - Add Niagara2 crypto driver crypto: skcipher - Add ablkcipher_walk interfaces crypto: testmgr - Add testing for async hashing and update/final crypto: tcrypt - Add speed tests for async hashing crypto: scatterwalk - Fix scatterwalk_done() test crypto: hifn_795x - Rename ablkcipher_walk to hifn_cipher_walk padata: Use get_online_cpus/put_online_cpus in padata_free padata: Add some code comments padata: Flush the padata queues actively padata: Use a timer to handle remaining objects in the reorder queues crypto: shash - Remove usage of CRYPTO_MINALIGN crypto: mv_cesa - Use resource_size crypto: omap - OMAP macros corrected padata: Use get_online_cpus/put_online_cpus ... Fix up conflicts in arch/arm/mach-omap2/devices.c
OpenPOWER on IntegriCloud