summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap1/include/mach
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'omap1-usb-fix' into omap-for-v4.21/omap1Tony Lindgren2018-12-111-1/+1
|\
| * ARM: OMAP1: fix USB configuration for device-only setupsAaro Koskinen2018-12-111-1/+1
| | | | | | | | | | | | | | | | | | | | Currently we do USB configuration only if the host mode (CONFIG_USB) is enabled. But it should be done also in the case of device-only setups, so change the condition to CONFIG_USB_SUPPORT. This allows to use omap_udc on Palm Tungsten E. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP1: ams-delta: make board header file local to mach-omap1Janusz Krzysztofik2018-11-291-64/+0
| | | | | | | | | | | | | | | | Now as the board header file is no longer included by drivers, move it to the root directory of mach-omap1. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP1: ams-delta: initialize latch2 pins to safe valuesJanusz Krzysztofik2018-09-201-7/+0
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Latch2 pins control a number of on-board devices, namely LCD, NAND, MODEM and CODEC. Those pins used to be initialized with safe values from init_machine before that operation was: 1) moved to late_initcall in preparation for conversion of latch2 to GPIO device - see commit f7519d8c8290 ("ARM: OMAP1: ams-delta: register latch dependent devices later"), 2) replaced with non-atomic initialization performed by means of gpio_request_array() - see commit 937eb4bb0058 ("ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio"), 3) made completely asynchronous by delegation of GPIO request operations performed on subsets of pins to respective device drivers in subsequent commits. One visible negative result of that disintegration was corrupt keyboard data reported by serio driver, recently fixed by commit 41f8fee385a0 ("ARM: OMAP1: ams-delta: Hog "keybrd_dataout" GPIO pin"). Moreover, initialization of LATCH2_PIN_MODEM_CODEC still performed with ams_delta_latch2_write() wrapper from late_init() is now done on not requested GPIO pin. Reintroduce atomic initialization of latch2 pins at machine_init to prevent from random values potentially corrupting NAND data or maybe even destroing other hardware. Also take care of MODEM/CODEC related pins so MODEM device probe succeeds even if latch2 GPIO device or dependent regulator is not ready and CODEC can be reached over the MODEM even if audio driver doesn't take control over LATCH2_PIN_MODEM_CODEC. Once done, remove the no longer needed GPIO based implementation of ams_delta_latch_write() and its frontend macro. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> [tony@atomide.com: updated for the header location to remove dependency] Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: Get rid of <mach/ams-delta-fiq.h>Janusz Krzysztofik2018-07-021-79/+0
| | | | | | | | | | | | | | | Split the header file into two parts and move them to directories where they belong. Information on internal structure of FIQ buffer is moved to <linux/platform_data/ams-delta-fiq.h> for ams-delta-serio driver use. Other information used by ams-delta board init file and FIQ code is made local to mach-omap1 root directory. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: ams-delta FIQ: don't use static GPIO numbersJanusz Krzysztofik2018-07-021-1/+1
| | | | | | | | | | | | | | | | | | | | With introduction of GPIO lookup tables to Amstrad Delta board init file, semantics of symbols representing OMAP GPIO pins defined in <mach/board-ams-delta.h> changed from statically assigned global GPIO numbers to hardware pin numbers local to OMAP "gpio-0-15" chip. This patch modifies deferred FIQ interrupt handler so it no longer uses static GPIO numbers in favour of IRQ data descriptors obtained at FIQ initialization time from descriptor of the GPIO chip with use of its hardware pin numbers. The chip descriptor is passed from the board init file. As a benefit, the deferred FIQ handler should work faster. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> [tony@atomide.com: removed duplicate gpiochip_match_by_label] Signed-off-by: Tony Lindgren <tony@atomide.com>
* License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-022-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ARM: OMAP1: USB: make omap_otg_init() staticAaro Koskinen2017-01-051-2/+0
| | | | | | | Make omap_otg_init() static. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or moduleJavier Martinez Canillas2016-08-261-1/+1
| | | | | | | | | | | The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'armsoc-soc' of ↵Linus Torvalds2016-08-011-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Improved and new platform support for various SoCs: New SoC support: - Broadcom BCM23550 - Freescale i.MX7Solo - Qualcomm MDM9615 - Renesas r8a7792 Improvements: - convert clps711x to multiplatform - debug uart improvements for Atmel platforms - Tango platform improvements: HOTPLUG_CPU, Suspend-to-ram - OMAP tweaks and improvements to hwmod - OMAP support for kexec on SMP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits) ARM: davinci: fix build break because of undeclared dm365_evm_snd_data ARM: s3c64xx: smartq: Avoid sparse warnings ARM: sti: Implement dummy L2 cache's write_sec ARM: STi: Update machine _namestr to be more generic. arm: meson: explicitly select clk drivers ARM: tango: add Suspend-to-RAM support ARM: hisi: consolidate the hisilicon machine entries ARM: tango: fix CONFIG_HOTPLUG_CPU=n build MAINTAINERS: Update BCM281XX/BCM11XXX/BCM216XX entry MAINTAINERS: Update BCM63XX entry MAINTAINERS: Add NS2 entry MAINTAINERS: Fix nsp false-positives MAINTAINERS: Change L to M for Broadcom ARM/ARM64 SoC entries ARM: debug: Enable DEBUG_BCM_5301X for Northstar Plus SoCs ARM: clps711x: Switch to MULTIPLATFORM ARM: clps711x: Remove boards support ARM: clps711x: Add basic DT support ARM: clps711x: Reduce static map size ARM: SAMSUNG: Constify iomem address passed to s5p_init_cpu ARM: oxnas: Change OX810SE default driver config ...
| * ARM: OMAP1: Fix typo in mtd-xip.hAndrea Gelmini2016-06-101-1/+1
| | | | | | | | | | Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP1: fix ams-delta FIQ handler to work with sparse IRQJanusz Krzysztofik2016-06-171-0/+2
|/ | | | | | | | | | | | After OMAP1 IRQ definitions have been changed by commit 685e2d08c54b ("ARM: OMAP1: Change interrupt numbering for sparse IRQ") introduced in v4.2, ams-delta FIQ handler which depends on them no longer works as expected. Fix it. Created and tested on Amstrad Delta against Linux-4.7-rc3 Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: 8532/1: uncompress: mark putc as inlineArnd Bergmann2016-02-221-1/+1
| | | | | | | | | | | | | | | | | | | When CONFIG_DEBUG_ICEDCC is set, we don't use the platform specific putc() function, but use icedcc_putc() instead, so putc is unused and causes a compile time warning: In file included from ../arch/arm/boot/compressed/misc.c:28:0: arch/arm/mach-rpc/include/mach/uncompress.h:79:13: warning: 'putc' defined but not used [-Wunused-function] arch/arm/mach-w90x900/include/mach/uncompress.h:30:13: warning: 'putc' defined but not used [-Wunused-function] On most platforms, this does not happen, because putc is defined as 'static inline' so the compiler will automatically drop it when it's unused. This changes the remaining seven platforms to behave the same way. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: omap1: make headers more localArnd Bergmann2015-12-013-82/+0
| | | | | | | | | Some header files are never included outside of a mach-omap1 directory and do not need to be made visible in include/mach, so let's just move them all down one level. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: Remove board support for VoiceBlue boardLadislav Michl2015-10-121-19/+0
| | | | | | | Remove board support files for 10 years discontinued VoiceBlue board. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: Fix randconfig builds if ARCH_OMAP15XX not selectedTony Lindgren2015-05-211-1/+3
| | | | | | | | | | | | | | | | | | | With the omap1 SPARSE_IRQ changes mach/irqs.h is no longer automatically included. Turns out now we rely on ARCH_OMAP15XX including hardware.h from memory.h, so without ARCH_OMAP15XX we get build failures. As we have legacy drivers still relying on these indirect includes, let's not add more mach includes to the drivers. Those have to be removed anyways for multiplatform support. Let's fix up mach-omap1 to include soc.h where cpu_is_omap checks are done, and common.h for board-*.c files. But let's keep the indirect memory.h include for now to avoid unnecessary churn in the drivers. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: Change interrupt numbering for sparse IRQTony Lindgren2015-05-202-64/+64
| | | | | | | | | | | | | | | | Change interrupt numbering for sparse IRQ. We do this using a fixed offset until we can drop irqs.h once all it's users have been updated. Note that this depends on the GPIO fix for the MPUIO IRQs "gpio: omap: Fix regression for MPUIO interrupts". Also note that this patch adds some extra irq alloc warnings that will go away when we stop calling irq_alloc_descs in gpio-omap.c with a follow-up patch. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: omap1: Switch to use MULTI_IRQTony Lindgren2015-05-201-39/+0
| | | | | | | | | | | | This allows us to get a bit further with SPARSE_IRQ and MULTIARCH support. Note that we now also rename omap_irq_flags to omap_l2_irq as that's the omap_irq_flags naming is confusing. It just contains the interrupt number for the l2 irq. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: Move UART defines to prepare for sparse IRQTony Lindgren2015-05-201-5/+0
| | | | | | | | | | | These have been indirectly included via asm/irqs.h that has included mach/hardware.h unless SPARSE_IRQ is specified. Let's move them to where the other OMAP serial defines for 8250 are. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: 8271/1: omap1: Migrate debug_ll macros to use 8250.SDaniel Thompson2015-01-211-101/+0
| | | | | | | | | | | | | | | | | | | | | | | The omap1's debug-macro.S is similar to the generic 8250 code. Compared to the 8520 code the omap1 macro automatically determines what UART to use based on breadcrumbs left by the bootloader and automatically copes with the eccentric register layout on OMAP7XX. This patch drops both these features and relies instead on the generic 8250 macros: 1. Dropping support for the bootloader breadcrumbs is identical to the way the migration was handled for OMAP2 (see 808b7e07464d...). 2. Support for OMAP7XX still exists but it must be configured by hand (DEBUG_OMAP7XXUART1/2/3) rather than handled at runtime. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: linux-omap@vger.kernel.org Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 8113/1: remove remaining definitions of PLAT_PHYS_OFFSET from ↵Uwe Kleine-König2014-07-291-5/+0
| | | | | | | | | | | | | | | | | | | | | | <mach/memory.h> The platforms selecting NEED_MACH_MEMORY_H defined the start address of their physical memory in the respective <mach/memory.h>. With ARM_PATCH_PHYS_VIRT=y (which is quite common today) this is useless though because the definition isn't used but determined dynamically. So remove the definitions from all <mach/memory.h> and provide the Kconfig symbol PHYS_OFFSET with the respective defaults in case ARM_PATCH_PHYS_VIRT isn't enabled. This allows to drop the dependency of PHYS_OFFSET on !NEED_MACH_MEMORY_H which prevents compiling an integrator nommu-kernel. (CONFIG_PAGE_OFFSET which has "default PHYS_OFFSET if !MMU" expanded to "0x" because CONFIG_PHYS_OFFSET doesn't exist as INTEGRATOR selects NEED_MACH_MEMORY_H.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux into ↵Olof Johansson2014-02-181-5/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | next/cleanup This cleanup series gets rid of <mach/timex.h> for platforms not using ARCH_MULTIPLATFORM. (For multi-platform code it's already unused since 387798b (ARM: initial multiplatform support).) To make this work some code out of arch/arm needed to be adapted. The respective changes got acks by their maintainers to be taken via armsoc (with Andrew Morton substituting for Alessandro Zummo as rtc maintainer). Compared to the previous pull request there was another patch added that fixes a (non-critical) regression on ixp4xx. Olof Johansson asked to not squash this fix into the original commit to save him from the need to reverify the series. * tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux: ARM: ixp4xx: fix timer latch calculation ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too ARM: rpc: stop using <mach/timex.h> ARM: ixp4xx: stop using <mach/timex.h> input: ixp4xx-beeper: don't use symbols from <mach/timex.h> ARM: at91: don't use <mach/timex.h> ARM: ep93xx: stop using mach/timex.h ARM: mmp: stop using mach/timex.h ARM: netx: stop using mach/timex.h ARM: sa1100: stop using mach/timex.h clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE rtc: pxa: drop unused #define TIMER_FREQ rtc: at91sam9: include <mach/hardware.h> explicitly ARM/serial: at91: switch atmel serial to use gpiolib Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, tooUwe Kleine-König2013-12-201-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | While <mach/timex.h> isn't used for multi-platform builds since long it still is for "normal" builds. As the previous patches fix all sites to not make use of this per-platform file, it can go now for good also for platforms that are not (yet) converted to multi-platform. While at it there are no users of CLOCK_TICK_RATE any more, so also drop the dummy #define. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* | ARM: OMAP1: USB: move omap_usb_config to platform dataAaro Koskinen2013-12-061-37/+1
|/ | | | | | | | Move omap_usb_config to platform data, so that OTG driver can include it. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs'R Sricharan2013-08-131-0/+1
| | | | | | | | | | | | | The DRA7xx is a high-performance, infotainment application device, based on enhanced OMAP architecture integrated on a 28-nm technology. Since DRA7 is a platform supported only using DT, the cpu detection is based on the compatibles passed from DT blobs as suggested here http://lists.infradead.org/pipermail/linux-arm-kernel/2013-July/187712.html Suggested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com>
* ARM: OMAP1: Remove legacy irda.h and irda setup from board filesJarkko Nikula2013-06-181-33/+0
| | | | | | | | | | | | | omap-ir.c driver has never been upstream and was also removed from linux-omap.git four years ago (See linux-omap.git commit efd1e3f ("REMOVE OMAP LEGACY CODE: Reset drivers/net/irda to mainline")). Therefore remove needless device registration from a few board files and delete thus to be unused arch/arm/mach-omap1/include/mach/irda.h and unused OMAP_DMA_UART3_* definitions from dma.h. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: fix omap_udc registrationAaro Koskinen2013-04-081-1/+1
| | | | | | | | | | | | | omap_udc platform device is not registered properly anymore: CONFIG_USB_GADGET_OMAP was deleted by 193ab2a6 (usb: gadget: allow multiple gadgets to be built) already in v3.1. Fix by using CONFIG_USB_OMAP instead. Tested on Nokia 770 by checking that omap_udc is probed & working properly when built as a module. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: remove unused arch_decomp_wdog()Shawn Guo2013-01-111-5/+0
| | | | | | | | | | With ARCH_HAS_DECOMP_WDOG removed from arch/arm/boot/compressed/decompress.c, all the arch_decomp_wdog() definition at platform level is unneeded. Remmove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Jason Cooper <jason@lakedaemon.net>
* ARM: OMAP: Remove NEED_MACH_GPIO_HTony Lindgren2012-11-021-3/+0
| | | | | | | | | | | | | | | | | | Omap no longer needs this option, mach/gpio.h is empty. Also remove mach/irqs.h from gpio-omap.h and include it directly from the related omap1 gpio init files. Otherwise omap2+ build fails for MULTI_PLATFORM. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: alsa-devel@alsa-project.org Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: Remove relative includesTony Lindgren2012-10-314-4/+234
| | | | | | | | | | | | | | | | | As discussed on linux-arm-kernel, we want to avoid relative includes for the arch/arm/*omap* code: http://www.spinics.net/lists/linux-omap/msg80520.html Note that eventually when the omap1 specific drivers are fixed to not use cpu_is_omap macros and not depend on mach/hardware.h, this patch can be reverted and these headers can be local. But since just fixing the drivers for omap2+ is already a big enough hassle, let's deal with that properly first. [tony@atomide.com: also drop unused include for ispvideo.c] Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: Split plat/serial.h for omap1 and omap2+Tony Lindgren2012-10-244-3/+56
| | | | | | | | For omap1, we'll keep mach/serial.h around for 8250.c hardware workarounds. For omap2+, we no longer need mach/serial.h and can make it local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: Split uncompress.h to mach-omap1 and mach-omap2Tony Lindgren2012-10-241-2/+119
| | | | | | | This allows us to eventually move omap2+ to generic debug code that's configured in Kconfig for the port. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2Tony Lindgren2012-10-182-2/+2
| | | | | | | | | | | | | | | | We want to remove plat/cpu.h. To do this, let's first split it to private soc.h to mach-omap1 and mach-omap2. We have to keep plat/cpu.h around until the remaining drivers are fixed, so let's include the local soc.h in plat/cpu.h and for drivers still including plat/cpu.h. Once the drivers are fixed not to include plat/cpu.h, we can remove the file. This is needed for the ARM common zImage support. [tony@atomide.com: updated to not print a warning] Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: Move plat/tc.h to mach/tc.h for omap1Tony Lindgren2012-10-172-1/+90
| | | | | | | | | We cannot keep this in plat as it causes problems with the ARM single zImage support. Cc: Felipe Balbi <balbi@ti.com> Cc: linux-pcmcia@lists.infradead.org Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: Make plat/fpga.h local to arch/arm/plat-omapTony Lindgren2012-10-171-0/+113
| | | | | | | | | | | | | | | | | | There's no need to have this file in plat/fpga.h. We can make it local to plat-omap replacing fpga_read/write functions directly with readb/writeb as that's how they are already defined in fpga.h. Note that 2420 based H4 is also using the fpga, so let's keep the led support around in plat-omap until we flip over mach-omap2 to device tree. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: linux-fbdev@vger.kernel.org Cc: Felipe Balbi <balbi@ti.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: Move irda.h from plat to machTony Lindgren2012-09-201-0/+33
| | | | | | This is only used by omap1. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: Move flash.h from plat to machTony Lindgren2012-09-201-0/+17
| | | | | | This is only used by omap1. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: Move board-voiceblue.h from plat to machTony Lindgren2012-09-201-0/+19
| | | | | | This is only used by omap1. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: Move board-sx1.h from plat to machTony Lindgren2012-09-201-0/+52
| | | | | | This is only used by omap1. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: Move board-ams-delta.h from plat to machTony Lindgren2012-09-201-0/+71
| | | | | | | | | | | | | | | | | | | | This is only used by omap1. And to fix things properly, this should not be included from the drivers at all. Acked-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Cc: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Cc: linux-mtd@lists.infradead.org Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: alsa-devel@alsa-project.org Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: Make plat/mux.h omap1 onlyTony Lindgren2012-09-201-0/+454
| | | | | | | | | | | | | | | | | | We are moving omap2+ to use the device tree based pinctrl-single.c and will be removing the old mux framework. This will remove the omap1 specific parts from plat-omap. Acked-by: Felipe Balbi <balbi@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-usb@vger.kernel.org Cc: linux-pcmcia@lists.infradead.org Cc: spi-devel-general@lists.sourceforge.net Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: Remove smp.hTony Lindgren2012-09-201-5/+0
| | | | | | This is no longer needed. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: Move SoC specific headers from plat to mach for omap1Tony Lindgren2012-09-124-3/+359
| | | | | | | | | | | | There's no need to have these in plat-omap any longer. Note that these could eventually be made local to mach-omap1 instead of being in mach. But to do that, at least various driver access using omap7xxx.h registers needs to be fixed first. Cc: spi-devel-general@lists.sourceforge.net Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+Tony Lindgren2012-09-121-4/+281
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: Move plat/irqs.h to mach/irqs.hTony Lindgren2012-09-122-4/+265
| | | | | | This is now omap1 specific files. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: Move gpio.h to include/linux/platform_dataTony Lindgren2012-09-121-2/+0
| | | | | | | | | | | | | | | | | This way we can remove includes of plat/gpio.h which won't work with the single zImage support. Note that we also remove the cpu_class_is_omap2() check in gpio-omap.c as the drivers should not call it as we need to make it local to arch/arm/mach-omap2 for single zImage support. While at it, arrange the related includes in the standard way. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: linux-mtd@lists.infradead.org Cc: alsa-devel@alsa-project.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: Make FS USB omap1 onlyTony Lindgren2012-06-041-0/+165
| | | | | | | | | | | | | | | | | | As the FS USB code is not being actively used for omap2+ there's no point keeping it around for omap2+. Let's make the FS USB platform init code omap1 only so we can remove the last user of omap_read/write for omap2+, and simplify things for further USB, DMA, and device tree related work. While at it, also group the mach includes for the related drivers. Cc: linux-usb@vger.kernel.org Cc: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: fix __io macro for PCMCIARob Herring2012-04-051-0/+45
| | | | | | | | | | | | | | | | | | | | | | With commit c334bc1 (ARM: make mach/io.h include optional), PCMCIA was broken. PCMCIA depends on __io() returning a valid i/o address, and most ARM platforms require IO_SPACE_LIMIT be set to 0xffffffff for PCMCIA. This needs a better fix with a fixed i/o address mapping, but for now we just restore things to the previous behavior. This fixes at91, omap1, pxa and sa11xx. pxa needs io.h if PCI is enabled, but PCMCIA is not. sa11xx already has IO_SPACE_LIMIT set to 0xffffffff, so it doesn't need an io.h. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Joachim Eastwood <joachim.eastwood@jotron.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Tested-by: Paul Parsons <lost.distance@yahoo.com> (pxa270) Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* ARM: remove bunch of now unused mach/io.h filesRob Herring2012-03-061-46/+0
| | | | | | | | | | | | | Now that many platforms don't need mach/io.h, remove the unused ones. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org>
* ARM: OMAP: Remove remaining includes for mach/io.hTony Lindgren2012-03-061-1/+0
| | | | | | | | | | These are no longer needed with the recent iomap.h changes. Reported-by: Rob Herring <robherring2@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
OpenPOWER on IntegriCloud