summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-imx
Commit message (Collapse)AuthorAgeFilesLines
* Enable RTC driver.Jürgen Lambrecht2011-07-071-1/+2
| | | | | | | | | | The MC13783 MFD also contains an RTC. Enable it. To avoid "No RTC device found, ALARM timers will not wake from suspend", this patch is needed: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=c008ba58af24dc5d0d8e9fe6e59d876910254761 Signed-off-by: Jürgen Lambrecht <J.Lambrecht@televic.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* dmaengine: imx-sdma: pass sdma firmware name via platform dataShawn Guo2011-07-073-8/+13
| | | | | | | | | | | | | | | | | | | It is not good to have cpu_name and to_version encoded into sdma firmware name as variables. For example, there are three TOs of imx51 soc, the sdma script never changes since TO1, which means all three TOs of imx51 uses TO1 version of sdma script. But we have to prepare three identical firmwares, sdma-imx51-to1.bin sdma-imx51-to2.bin and sdma-imx51-to3.bin, to have the kernel capable of running on all three TOs. The patch removes cpu_name and to_version from sdma platform data, and instead uses fw_name to pass the firmware name, so that we can pass the TO version where it's relevant and skip it where only one firmware exists. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: mxc: clean up imx-dma device registrationShawn Guo2011-07-075-0/+100
| | | | | | | | | | | | The patch follows the implementation of gpio-mxc device registration to break the concentrated imx-dma device registration into soc specific setup function. Then we can avoid the churn of "#ifdef" and the cpu_is_mx checking on such a long list, which makes no sense, considering more soc supports need to be added and we need to support single image for multiple socs in the long run. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: mach-imx/mx27_3ds: Add touchscreen supportFabio Estevam2011-07-071-1/+1
| | | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: mach-imx/mx27_3ds: Add LCD supportFabio Estevam2011-07-072-0/+91
| | | | | | | | | On mx27_3ds board there is a l4f00242t03 LCD that is controlled via CSPI1. Add support for CSPI1 and LCD. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: imx2: Fix GPIO iosizeFabio Estevam2011-07-073-16/+20
| | | | | | | | | | | | On MX1, MX21 and MX27 each GPIO port has an address space of 256 bytes. Fix the iosize for these platforms. Tested on a mx27_3ds board that can boot fine after this change. Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge remote-tracking branch 'grant/gpio/next-mx' into devel-featuresSascha Hauer2011-07-0735-56/+107
|\ | | | | | | | | | | | | | | Conflicts: arch/arm/mach-imx/mach-mx31_3ds.c arch/arm/mach-imx/mach-scb9328.c Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * gpio/mxc: Change gpio-mxc into an upstanding gpio driverShawn Guo2011-06-0635-56/+107
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch makes necessary changes on gpio-mxc as below to turn it into an upstanding gpio driver. * Add a list to save all mx2 ports references, so that mx2_gpio_irq_handler can walk through all interrupt status registers * Use readl/writel to replace mach-specific accessors __raw_readl/__raw_writel * Change mxc_gpio_init into mxc_gpio_probe function * Move "struct mxc_gpio_port" into gpio-mxc.c, as it needs not to be public at all, and also make some other cleanup on plat-mxc/include/mach/gpio.h at the same time And the patch then migrates mach-imx and mach-mx5 to the updated driver by adding corresponding platform devices. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | ARM: mach-imx/mx27_3ds: Do not annotate the chip select as internalFabio Estevam2011-07-071-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | On the i.MX SPI driver the chipselect pins can be of the following types: - internal: when the chipselect pin is used as a dedicated CS pin of the CSPI controller - GPIO: a generic GPIO can be used as a chipselect funtion On the mx27_3ds the SPI2 chip select is a GPIO, so don't annotate 'internal' in the chip select definition. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: mach-imx/mx27_3ds: Use the standard gpio_to_irq functionFabio Estevam2011-07-071-4/+5
| | | | | | | | | | | | | | Use the standard gpio_to_irq function instead of a dedicated IRQ_GPIOx macro. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: mach-imx/scb9328: Make the UART gpio setup simplerFabio Estevam2011-07-071-14/+3
| | | | | | | | | | | | | | | | Place the UART gpio initialization inside the scb9328_init function as it is done on other i.MX boards. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: imx/mach-apf9328: Simplify UART0 registrationFabio Estevam2011-07-071-6/+1
| | | | | | | | | | | | | | | | As no flag is passed into UART0 platform data, pass NULL argument when registering UART0. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM i.MX: get rid of wrong MXC_INTERNAL_IRQ usageSascha Hauer2011-07-071-1/+1
| | | | | | | | | | | | | | | | | | There are several occurences where MXC_INTERNAL_IRQ is assumed to be the start of the gpio interrupts. It was never meant this way. Replace these with gpio_to_irq. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
* | ARM i.MX: dmav1: kill SoC ifdefsSascha Hauer2011-07-071-22/+3
| | | | | | | | | | | | | | since we now can include all soc specific headers at once we do not need the ifdeffery anymore. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM i.MX: fix last user of iomux.h and remove itSascha Hauer2011-07-071-1/+1
| | | | | | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: imx: convert to new leds-gpio registration helperUwe Kleine-König2011-07-076-60/+25
| | | | | | | | | | | | | | | | This gets rid of per machine struct platform_device definitions and allows to move the platform data and led definition to .init.rodata. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: mach-imx/mx27_3ds: Fix regulator supportFabio Estevam2011-07-071-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | Fix the 2.8V (VMMC1) and 1.8V (VGEN) voltage generation on mx27_3ds. Also configure the IOMUX for the PMIC interrupt pin and for the CSPI chip select that is connected to the MC13783 PMIC. In order to get the voltage for the LCD (2.8V and 1.8V) it is also necessary to turn on GPO1 and GPO3 supplies because they are connected to switches that enable these two voltages. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: mach-imx/mx31_3ds: Fix IOMUX for SPI1 signalsFabio Estevam2011-07-071-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Original code was assuming that the CSPI1 pins on the MX31PDK were the primary pin function, which is incorrect. On MX31PDK board these are the pins that provide CSPI1 functionality: DSR_DCE1 (ALT mode 1) --> CSPI1_CLK RI_DCE1 (ALT mode 1) --> CSPI1_RDY DTR_DTE1 -->CSI1_MOSI DSR_DTE1 --> CSPI1_MISO DTR_DCE2 ---> CSPI1_SS2 The 3 IOMUX settings above are done via GPR as per Table A-1 of the MX31RM. This patch fixes the CSPI1 IOMUX and makes the LCD to be functional. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: mach-imx/mx27_3ds: Use the standard i.MX macro for GPIO numberingFabio Estevam2011-07-071-4/+4
|/ | | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: imx: move mx3 support to mach-imxUwe Kleine-König2011-05-1938-7/+9784
| | | | | | | | | Fixing a few "please, no space before tabs" and "empty line at end of file" warnings on the way. LAKML-Reference: 1299271882-2130-6-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MX1: Add ARMadeus Systems APF9328 board supportGwenhael Goavec-Merou2011-05-193-0/+152
| | | | | | | | | | | | | APF9328 is an i.MXL based SOM (System On Module) that can be plugged on several docking/development boards. Here only basic module support is added (Ethernet, Serial, NOR Flash). Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Eric Jarrige <eric.jarrige@armadeus.org> Signed-off-by: Nicolas Colombain <nicolas.colombain@armadeus.com> Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: mxc: don't use the symbols in the CPU family choice to select othersUwe Kleine-König2011-05-191-0/+1
| | | | | | | | | | | | | The symbols in this choice should only be used to select between the available machines that can be built into a single kernel. As these sets (will) differ e.g. depending on ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR letting them select other symbols makes the logic more complex and needs to duplicate some things. So let the machines select the corresponding symbols (indirectly via SOC_XYZ). LAKML-Reference: 1302464943-20721-2-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: imx: clean up the section marks of extern dataRichard Zhao2011-05-194-48/+47
| | | | | | | Signed-off-by: Richard Zhao <richard.zhao@linaro.org> LAKML-Reference: 1301566583-18947-1-git-send-email-richard.zhao@freescale.com Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: imx: remove #includes already available from devices-common.hUwe Kleine-König2011-05-1911-13/+0
| | | | | | | | | | | | | | | | | Most machine files include "devices-imxXX.h" which in turn includes <mach/devices-common.h>. The latter already includes many headers that the machine files don't need to include again. These were found by: $ grep \#include arch/arm/plat-mxc/include/mach/devices-common.h > tmpfile $ git grep -l 'devices-imx' arch/arm | xargs grep -f tmpfile -F (but I kept linux/init.h, linux/kernel.h and linux/platform_device.h) LAKML-Reference: 1298912674-15153-2-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: imx: use imx_add_gpio_keys to register "gpio-keys" devicesUwe Kleine-König2011-05-193-23/+8
| | | | | | LAKML-Reference: 1302207841-12450-1-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: mach-imx: mx25_3ds: add write-protect and card-detect for SDShawn Guo2011-05-191-1/+11
| | | | | | | | | | Signed-off-by: Shawn Guo <shawn.guo@freescale.com> LAKML-Reference: 1298733544-24659-1-git-send-email-shawn.guo@freescale.com Acked-by: Wolfram Sang <w.sang@pengutronix.de> [ukl: fixup conflict with ff86452 (ARM: mx25_3ds: Add I2C support) and drop #inclusion of <mach/esdhc.h>] Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Russell King2011-03-282-1/+8
|\ | | | | | | devel-stable
| * eukrea_mbimxsd25-baseboard: add SD card detectEric Bénard2011-03-251-1/+7
| | | | | | | | | | | | Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * ARM: imx: let MACH_IMX27_VISSTRIM_M10 select IMX_HAVE_PLATFORM_IMX_SSIUwe Kleine-König2011-03-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | mach-imx27_visstrim_m10.c uses imx27_add_imx_ssi() so it needs to select IMX_HAVE_PLATFORM_IMX_SSI to fix: arch/arm/mach-imx/built-in.o: In function `visstrim_m10_board_init': mach-imx27_visstrim_m10.c:(.init.text+0x308): undefined reference to `imx_add_imx_ssi' mach-imx27_visstrim_m10.c:(.init.text+0x394): undefined reference to `imx27_imx_ssi_data' Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | mfd: mfd_cell is now implicitly available to mc13xxx driversAndres Salomon2011-03-232-8/+13
|/ | | | | | | | | | | | | | | The cell's platform_data is now accessed with a helper function; change clients to use that, and remove the now-unused data_size. Note that mfd-core no longer makes a copy of platform_data, but the mc13xxx-core driver creates the pdata structures on the stack. In order to get around that, the various ARM mach types that set the pdata have been changed to hold the variable in static (global) memory. Also note that __initdata references in aforementioned pdata structs have been dropped. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* arm: imx: Zero entire imxdma structureIlia Mirkin2011-03-101-1/+1
| | | | | | | | | | | | | | | | | The semantic match that finds the problem: // <smpl> @@ type T; identifier x; @@ T *x; ... * memset(x, ..., ... * sizeof(x) * ...); // </smpl> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: imx/mx25: dynamically allocate pwm devicesBaruch Siach2011-03-081-0/+4
| | | | | Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: imx/mx25: fix (again) spi device registration typoBaruch Siach2011-03-081-1/+1
| | | | | | | | | | This typo was fixed in 46e3f30 (mx25: fix spi device registration typo), but a the merge at 0e44e059 (Merge commit 'v2.6.37-rc4' into imx-for-2.6.38) resolved the merge conflict wrongly. Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM i.MX: introduce imx_otg_ulpi_create to create ULPI transceiversSascha Hauer2011-03-073-33/+25
| | | | | | | | | The boards are currently using otg_ulpi_create and mxc_ulpi_access_ops, both are only present if CONFIG_USB_ULPI is set. To remove the need of ifdefs in the board code introduce a imx_otg_ulpi_create functions which expands to a static inline function if compiled without ulpi. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM i.MX: iomux v1 initialization away from initcallSascha Hauer2011-03-073-0/+9
| | | | | | This saves us from soc level dispatching in generic files Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM i.MX: Move gpio initialization to SoC specific filesSascha Hauer2011-03-074-8/+40
| | | | | | This saves us from soc level dispatching in generic files Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MX1: Add structure, registration functions for framebuffer and rename LCDC INTGwenhael Goavec-Merou2011-03-071-0/+4
| | | | | Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: mx25_3ds: Add I2C supportFabio Estevam2011-03-072-0/+10
| | | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: mx27_3ds: Add I2C supportFabio Estevam2011-03-072-0/+8
| | | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: Add SSI and aic3204 code to Visstrim_M10 boards.Javier Martin2011-03-072-0/+15
| | | | | | | | Visstrim_M10 boards have an TI tlv320aic3204 codec attached to SSI1. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MX1: Add registration functions for SPI.Gwenhael Goavec-Merou2011-03-071-0/+7
| | | | | Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MX1: Register clock for SPI2Gwenhael Goavec-Merou2011-03-071-0/+1
| | | | | Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* i.MX25: add sdma clock definitionsEric Bénard2011-03-071-0/+3
| | | | | Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: imx/mach-mx25_3ds: Use IMX_GPIO_NR instead of hard-coded valuesFabio Estevam2011-02-281-2/+2
| | | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM i.MX ehci: do ehci init in board specific functionsSascha Hauer2011-02-117-14/+56
| | | | | | | | | | The mxc-ehci driver calls SoC specific phy initialization right after calling board specific initialization. To offer greater flexibility for boards to setup the phy and to get rid of some unnecessary flags in platform data this patch lets the boards call the SoC specific phy initialization and remove it from the driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM i.MX ehci: factor out soc specific functionsSascha Hauer2011-02-113-2/+164
| | | | | | | | | Currently we have a mxc_initialize_usb_hw which is called on every i.MX SoC. This function dispatches the different SoC types, which is quite ugly. This patch moves the SoC specific USB initialization to their correspondive mach directories. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge commit 'v2.6.38-rc4' into imx-for-2.6.39Sascha Hauer2011-02-111-1/+1
|\ | | | | | | | | | | | | Conflicts: arch/arm/mach-mxs/clock-mx28.c Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * ARM: mach-imx/mach-mx25_3ds: Fix section typeFabio Estevam2011-01-241-1/+1
| | | | | | | | | | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: imx: use .init_early to initialize cpu type and reset addressUwe Kleine-König2011-02-1018-87/+111
| | | | | | | | | | | | | | | | This used to be done in .map_io which is supposed to only setup the memory mapping. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: imx+mx3: convert to mc13xxx MFDDavid Jander2011-02-102-7/+7
| | | | | | | | | | | | Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
OpenPOWER on IntegriCloud