summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-davinci/dm365.c
Commit message (Collapse)AuthorAgeFilesLines
* ARM: 7040/1: mach-davinci: break out GPIO driver specificsLinus Walleij2011-08-221-2/+1
| | | | | | | | | | | | The <mach/gpio.h> file is included from upper directories and deal with generic GPIO and gpiolib stuff. Break out the platform and driver specific defines and functions into its own header file. Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* davinci: spi: move event queue parameter to platform dataMichael Williamson2011-02-281-4/+1
| | | | | | | | | | | | | | | For DMA operation, the davinci spi driver needs an event queue number. Currently, this number is passed as a IORESOURCE_DMA. This is not correct, as the event queue is not a DMA channel. Pass the event queue via the platform data structure instead. On dm355 and dm365, move the eventq assignment for spi0 out of resources array and into platform data. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kevin Hilman <khilman@ti.com>
* Merge branch 'for-grant' of ↵Grant Likely2010-12-291-6/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://arago-project.org/git/projects/linux-davinci into spi/next * 'for-grant' of git://arago-project.org/git/projects/linux-davinci into spi/next spi: davinci: fix checkpatch errors spi: davinci: whitespace cleanup spi: davinci: remove unused variable 'pdata' spi: davinci: set chip-select mode in SPIDEF only once spi: davinci: enable both activation and deactivation of chip-selects spi: davinci: remove unnecessary data transmit on CS disable spi: davinci: enable GPIO lines to be used as chip selects spi: davinci: simplify prescalar calculation spi: davinci: remove 'wait_enable' platform data member spi: davinci: make chip-slect specific parameters really chip-select specific spi: davinci: consolidate setup of SPIFMTn in one function spi: davinci: setup chip-select timers values only if timer enabled spi: davinci: add support for wait enable timeouts spi: davinci: remove unused members of davinci_spi_slave spi: davinci: eliminate the single member structure davinci_spi_slave spi: davinci: eliminate unnecessary update of davinci_spi->count spi: davinci: simplify calculation of edma acount value spi: davinci: check for NULL buffer pointer before using it spi: davinci: remove unnecessary disable of SPI spi: davinci: remove unnecessary 'count' variable in driver private data spi: davinci: remove unnecessary completion variable initialization spi: davinci: remove non-useful interrupt mode support spi: davinci: simplify poll mode transfers spi: davinci: add support for interrupt mode spi: davinci: configure the invariable bits in spipc0 only once spi: davinci: remove unnecessary function davinci_spi_bufs_prep() spi: davinci: remove unnecessary call to davinci_spi_setup_transfer() spi: davinci: do not store DMA channel information per chip select spi: davinci: always start transmit DMA spi: davinci: do not use temporary buffer if no transmit data provided spi: davinci: always start receive DMA spi: davinci: use edma_write_slot() to setup EDMA PaRAM slot spi: davinci: fix DMA event generation stoppage spi: davinci: fix EDMA CC errors at end of transfers spi: davinci: handle DMA completion errors correctly spi: davinci: remove usage of additional completion variables for DMA spi: davinci: let DMA operation be specified on per-device basis spi: davinci: remove non-useful "clk_internal" platform data spi: davinci: enable and power-up SPI only when required spi: davinci: setup the driver owner spi: davinci: add additional comments spi: davinci: add EF Johnson Technologies copyright spi: davinci: removed unused #defines spi: davinci: remove unnecessary typecast spi: davinci: do not treat Tx interrupt being set as error spi: davinci: do not allocate DMA channels during SPI device setup spi: davinci: remove unnecessary private data member 'region_size' spi: davinci: shorten variable names spi: davinci: kconfig: add manufacturer name to prompt string
| * spi: davinci: remove non-useful "clk_internal" platform dataBrian Niebuhr2010-11-181-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | The "clk_internal" platform data member which contols the CLKMOD bit in Global Control Register 1 is not useful since CLKMOD needs be set to 1 *always* to ensure master mode operation. Remove this platform data. Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com> Tested-By: Michael Williamson <michael.williamson@criticallink.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
| * spi: davinci: remove non-useful interrupt mode supportBrian Niebuhr2010-11-181-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The interrupt mode support as it stands is another version of poll mode. Even when interrupt mode is selected, the code tight loops on interrupt status register, rendering it totally useless. A completion variable is initialized, but never used. Remove this fake interrupt mode since users can anyway use poll mode with no functional difference. A usefully implemented interrupt mode support can be added later. Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com> Tested-By: Michael Williamson <michael.williamson@criticallink.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
| * spi: davinci: make chip-slect specific parameters really chip-select specificBrian Niebuhr2010-11-181-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Some chip-select specific paramterers like wdelay, parity, usage of chip-select timers (and the actual timer values) are included in platform data forcing the same behaviour across all chip-selects. Create a new davinci_spi_config data structure which can be passed along using controller_data member of spi_device data structure on a per-device basis. Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com> Tested-By: Michael Williamson <michael.williamson@criticallink.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
| * spi: davinci: enable both activation and deactivation of chip-selectsBrian Niebuhr2010-11-181-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let davinci_spi_chipselect() perform both activation and deactivation of chip selects. This lets spi_bitbang fully control chip select activation, as intended by the SPI API. With this change, the chip select activation code need not be duplicated in davinci_spi_bufs_{pio|dma}(). Also, keeping chip select active control is removed as a platform data and simply controlled using information from spi_bitbang on whether chip slect should be activated or de-activated. Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com> Tested-By: Michael Williamson <michael.williamson@criticallink.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
* | ASoC: davinci: fixes for multi-componentChris Paulson-Ellis2010-11-171-3/+3
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Multi-component commit f0fba2ad broke a few things which this patch should fix. Tested on the DM355 EVM. I've been as careful as I can, but it would be good if those with access to other Davinci boards could test. -- The multi-component commit put the initialisation of snd_soc_dai.[capture|playback]_dma_data into snd_soc_dai_ops.hw_params of the McBSP, McASP & VCIF drivers (davinci-i2s.c, davinci-mcasp.c & davinci-vcif.c). The initialisation had to be moved from the probe function in these drivers because davinci_*_dai changed from snd_soc_dai to snd_soc_dai_driver. Unfortunately, the DMA params pointer is needed by davinci_pcm_open (in davinci-pcm.c) before hw_params is called. I have moved the initialisation to a new snd_soc_dai_ops.startup function in each of these drivers. This fix indicates that all platforms that use davinci-pcm must have been broken and need to test with this fix. -- The multi-component commit also changed the McBSP driver name from "davinci-asp" to "davinci-i2s" in davinci-i2s.c without updating the board level references to the driver name. This change is understandable, as there is a similarly named "davinci-mcasp" driver in davinci-mcasp.c. There is probably no 'correct' name for this driver. The DM6446 datasheet calls it the "ASP" and describes it as a "specialised McBSP". The DM355 datasheet calls it the "ASP" and describes it as a "specialised ASP". The DM365 datasheet calls it the "McBSP". Rather than fix this problem by reverting to "davinci-asp", I've elected to avoid future confusion with the "davinci-mcasp" driver by changing it to "davinci-mcbsp", which is also consistent with the names of the functions in the driver. There are other fixes required, so it was never going to be as simple as a revert anyway. -- The DM365 only has one McBSP port (of the McBSP platforms, only the DM355 has 2 ports), so I've changed the the id of the platform_device from 0 to -1. -- In davinci-evm.c, the DM6446 EVM can no longer share a snd_soc_dai_link structure with the DM355 EVM as they use different cpu DAI names (the DM355 has 2 ports and the EVM uses the second port, but the DM6446 only has 1 port). This also means that the 2 boards need different snd_soc_card structures. -- The codec_name entries in davinci-evm.c didn't match the i2c ids in the board files. I have only checked and fixed the details of the names used for the McBSP based platforms. Someone with a McASP based platform (eg DA8xx) should check the others. Signed-off-by: Chris Paulson-Ellis <chris@edesix.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* Merge branch 'davinci-next' into davinci-for-linusKevin Hilman2010-10-211-2/+21
|\ | | | | | | | | | | Conflicts: arch/arm/mach-davinci/board-da830-evm.c arch/arm/mach-davinci/board-da850-evm.c
| * davinci: cleanup mdio arch code and switch to phy_idCyril Chemparathy2010-09-241-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes davinci architecture code that has now been rendered useless by the previous patches in the MDIO separation series. In addition, the earlier phy_mask definitions have been replaced with corresponding phy_id definitions. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Tested-by: Michael Williamson <michael.williamson@criticallink.com> Tested-by: Caglar Akyuz <caglarakyuz@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
| * davinci: add mdio platform devicesCyril Chemparathy2010-09-241-1/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds mdio platform devices on SoCs that have the necessary hardware. Clock lookup entries (aliases) have also been added, so that the MDIO and EMAC drivers can independently enable/disable a shared underlying clock. Further, the EMAC MMR region has been split down into separate MDIO and EMAC regions. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Michael Williamson <michael.williamson@criticallink.com> Tested-by: Caglar Akyuz <caglarakyuz@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* | ARM: 6409/1: davinci: map sram using MT_MEMORY_NONCACHED instead of MT_DEVICESantosh Shilimkar2010-09-251-2/+1
|/ | | | | | | | | | | | On Davinci SRAM is mapped as MT_DEVICE becasue of the section mapping pre-requisite instead of intended MT_MEMORY_NONCACHED Since the section mapping limitation gets fixed with first patch in this series, the MT_MEMORY_NONCACHED can be used now. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* davinci: edma: provide ability to detect insufficient CC info dataSekhar Nori2010-08-051-11/+13
| | | | | | | | | | | | | | | | This patch modifies the EDMA driver to expect the channel controller (CC) infomation passed on by the platform as a fixed size (EDMA_MAX_CC) array of pointers to structures. Doing so helps catch errors of the sort where the resource structure has information for more channel controllers than the number channel controller info structures defined. Such insufficient platform data would lead to illegal memory accesses. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DM365: fixed second serial portThomas Koeller2010-08-051-1/+3
| | | | | | | | The register base address for the second serial port (UART1) was wrong. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DM365: Added more PINMUX configurations for AEMIFThomas Koeller2010-05-131-1/+4
| | | | | | | More complete AEMIF support for boards. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DM365: Make CLKOUTx availableThomas Koeller2010-05-131-0/+4
| | | | | | | | Added PINMUX configurations for the CLKOUT0 .. CLKOUT2 functions, for boards that want to use these clocks. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DM365: Added PINMUX definitions for GPIO30..32Thomas Koeller2010-05-131-0/+3
| | | | | | | Board code may want to use them. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: pinmux - use ioremap()Cyril Chemparathy2010-05-131-1/+1
| | | | | | | | This patch modifies the pinmux implementation so as to ioremap() the pinmux register area on first use. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: aintc/cpintc - use ioremap()Cyril Chemparathy2010-05-131-1/+1
| | | | | | | | | | | | | | | | | | This patch implements the following: - interrupt initialization uses ioremap() instead of passing a virtual address via davinci_soc_info. - machine definitions directly point to cp_intc_init() or davinci_irq_init() - davinci_intc_type and davinci_intc_base now get initialized in controller specific init functions instead of davinci_common_init() - minor fix in davinci_irq_init() to use intc_irq_num instead of DAVINCI_N_AINTC_IRQ Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: psc - use ioremap()Cyril Chemparathy2010-05-131-3/+1
| | | | | | | | This patch modifies the psc and clock control code to use ioremap()ed registers. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: jtag_id - use ioremap()Cyril Chemparathy2010-05-131-1/+1
| | | | | | | | | | | This patch replaces the jtag id base info in davinci_soc_info with a physical address which is then ioremap()ed within common code. This patch (in combination with a similar change for PSC) will allow us to eliminate the SYSCFG nastiness in DA8xx code. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: gpio - use ioremap()Cyril Chemparathy2010-05-131-1/+1
| | | | | | | | | This patch modifies the gpio_base definition in davinci_soc_info to be a physical address, which is then ioremap()ed by the gpio initialization function. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: watchdog reset separation across socsCyril Chemparathy2010-05-061-0/+1
| | | | | | | | | | | | | | | | | The earlier watchdog reset mechanism had a couple of limitations. First, it embedded a reference to "davinci_wdt_device" inside common code. This forced all derived platforms (da8xx and tnetv107x) to define such a device. This also would have caused problems in including multiple socs in a single build due to symbol redefinition. With this patch, davinci_watchdog_reset() now takes the platform device as an argument. The davinci_soc_info struct has been extended to include a reset function and a watchdog platform_device. arch_reset() then uses these elements to reset the system in a SoC specific fashion. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Tested-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: eliminate pinmux offset verbosityCyril Chemparathy2010-05-061-5/+0
| | | | | | | | | | | Pinmux registers are sequential, and do not need to be enumerated out as they currently are. This reduces code volume and keeps things simple. If some future SoC comes up with a discontiguous register map, PINMUX() can then be expanded with local token pasting. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: gpio - controller type supportCyril Chemparathy2010-05-061-0/+1
| | | | | | | | | | | | | This patch allows for gpio controllers that deviate from those found on traditional davinci socs. davinci_soc_info has an added field to indicate the soc-specific gpio controller type. The gpio initialization code then bails out if necessary. More elements (tnetv107x) to be added later into enum davinci_gpio_type. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Tested-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DM365: Allow use of GPIO64_57Thomas Koeller2010-05-061-0/+1
| | | | | | | | Extended the MUX configuration to allow use of GPIO terminals 64..57. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: misc cleanups from sparseKevin Hilman2010-05-061-1/+1
| | | | | | | | - Convert data/functions to static - include headers for missing declarations - pointer cleanups: struct foo *__iomem f --> struct foo __iomem *f; Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DM365: fix duplicate default IRQ prioritiesKevin Hilman2010-04-051-1/+0
| | | | | | | | | | | IRQ 29 has two possible interrupts DDRINT and RTC, but having both in the default priority table is confusing (and triggers a warning from sparse.) This patch removes the lower priority DDRINT from the default priority table leaving the RTC setting as the default. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci DM365: Adding DM365 SPI supportSandeep Paulraj2010-03-011-0/+70
| | | | | | | | | | | This patch adds SPI init for DM365. It does the following 1) Initializes SPI0 2) Defines resources to be used by SPI0 3) Adds platform data for SPI0 Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: clkdev cleanup: remove clk_lookup wrapper, use clkdev_add_table()Kevin Hilman2010-02-041-1/+1
| | | | | | | Remove unneeded 'struct davinci_clk' wrapper around 'struct clk_lookup' and use clkdev_add_table() to add the list of clocks in one go. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: DM365: Voice codec support for the DM365 SoCMiguel Aguilar2010-02-041-1/+36
| | | | | | | | | This patch adds the generic Voice Codec support for the DM365 based platforms. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: DM365: Changing default queue for DM365.Sandeep Paulraj2010-02-041-1/+1
| | | | | | | | | In DM365 Q0, Q1 and Q2 are used by codecs. LSP drivers should use Q3. This patch changes the default queue for DM365. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci - Adding platform & board changes for vpfe capture on DM365Murali Karicheri2010-02-041-1/+101
| | | | | | | | | | | | This patch adds following changes:- 1) add sub device configuration data for TVP5146 used by vpfe capture 2) registers platform devices for vpfe_capture, isif and vpss 3) defines hardware resources for the devices listed under 2) 4) defines clock aliase for isif driver 5) adding setup_pinmux() for isif Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: DM365: Add the device_enable for the DaVinci KeyscanMiguel Aguilar2010-01-061-1/+0
| | | | | | | | | | | Adds the device_enable function to the DaVinci Keyscan platform data to setup the PINMUX configuration. It also removes #ifdef from the DM365 EVM board in order to load it properly as a module. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: DM365: Enable DaVinci RTC support for DM365 EVMMiguel Aguilar2009-11-251-0/+26
| | | | | | | | The general structures are defined at DM365 SoC file and the specific platform data structure for the EVM is defined at board file. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: DM365: Enable DaVinci Key Scan support for DM365 EVMMiguel Aguilar2009-11-251-1/+31
| | | | | | | The general structures are defined at DM365 SoC file and the specific platform data structure for the EVM is defined at board file. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com>
* DaVinci: remove unneeded #include'sSergei Shtylyov2009-11-251-2/+0
| | | | | | | | | | There have accumulated quite a lot of them after the code reorganizations... In several cases I had to replace #include <linux/dma-mapping.h> which wasn't needed directly but happened to #include <linux/err.h> which was needed. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: DM365: Add platform device for McBSPMiguel Aguilar2009-11-251-1/+44
| | | | | | | | | 1) Registers the platform device for McBSP on dm365. 2) Add platform data to DM365 EVM board file. 3) Set i2c address for audio codec at DM365 EVM board file. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: DM365: Correct USB parent clockSandeep Paulraj2009-11-251-1/+1
| | | | | | | | The parent clock for the USB source clock is actually PLL1 aux clock, not PLL2 sysclk1. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: DM365: Adding entries for DM365 IRQ'sSandeep Paulraj2009-08-261-0/+8
| | | | | | | | | | | | | | | This patch adds definitions for some DM365 IRQs that are used by the codecs. Codecs will also use the IRQs. Entries are being added to enable/disable IRQ's. There is no use as such for these entires in the kernel itself. Instead these will be used by the "linuxutils" package of the DVSDK. For further information on IRQ muxing refer to http://focus.ti.com/lit/ug/sprufg5a/sprufg5a.pdf Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: DM365: Add Support for new Revision of siliconSandeep Paulraj2009-08-261-1/+8
| | | | | | | | | | | | | DM365 RBL has been updated. The variant number has changed for this new revision of silicon. This patch adds support for the new revision of DM365. The name fields are also being updated to reflect the version of the silicon. Without this minor fix DM365 REV 1.2 will not boot up Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: DM365: Fix Compilation issue due to PINMUX entrySandeep Paulraj2009-08-261-1/+2
| | | | | | | | The mask can hold only 8 bit values. This gave a compilation warning. This patch rectifies the warning. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: EDMA: Updating default queue handlingSandeep Paulraj2009-08-261-0/+1
| | | | | | | | | | | | | | | | EDMA queues in DM365 are a little different than those on other DaVinci's. On DM365 Q0 and Q1 have the larger FIFO size. We want Q0 and Q1 to be used by codecs and DVSDK demos. MMC driver is the only driver which uses the flag 'EVENTQ_DEFAULT'. So MMC driver should be using Q2 instead of Q1 on DM365. This patch allows us to declare a "default queue" from SOC specific code. If it is not declared then the EDMA driver assumes a default of queue 1. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: dm365 gpio irq supportDavid Brownell2009-08-261-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Support DM365 GPIOs ... primarily by handling non-banked GPIO IRQs: - Flag DM365 chips as using non-banked GPIO interrupts, using a new soc_info field. - Replace the gpio_to_irq() mapping logic. This now uses some runtime infrastructure, keyed off that new soc_info field, which doesn't handle irq_to_gpio(). - Provide a new irq_chip ... GPIO IRQs handled directly by AINTC still need edge triggering managed by the GPIO controller. DM365 chips no longer falsely report 104 GPIO IRQs as they boot. Intelligence about IRQ muxing is missing, so for the moment this only exposes the first eight DM365 GPIOs, which are never muxed. The next eight are muxed, half with Ethernet (which uses most of those pins anyway). Tested on DM355 (10 unbanked IRQs _or_ 104 banked ones) and also on DM365 (16 unbanked ones, only 8 made available). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DM365 Updating PINMUX EntriesSandeep Paulraj2009-08-261-0/+51
| | | | | | | | Patch updates DM365 PINMUX by adding entries for Video, SPI 1 - 4, PWM 0 - 3. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: dm365: add EDMA supportSandeep Paulraj2009-08-261-0/+87
| | | | | Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: dm365: EMAC support for SoC and dm365 EVMSandeep Paulraj2009-08-261-0/+58
| | | | | | | | The patch adds Support for EMAC in the DM365 SOC and the DM365 EVM board. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: dm365: add mux entries for EDMA, RTC, EMAC, keypad.Sandeep Paulraj2009-08-261-0/+13
| | | | | Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Adding DM365 SOC SupportSandeep Paulraj2009-08-261-0/+699
The patch adds base support for new TI SOC DM365, which s similar to the dm355. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
OpenPOWER on IntegriCloud