summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91rm9200
Commit message (Collapse)AuthorAgeFilesLines
* [ARM] 3870/1: AT91: Start removing static memory mappingsAndrew Victor2006-09-282-47/+2
| | | | | | | | | | | | | This patch removes the static memory mapping for the currently-unused peripherals [Synchronous Serial, Timer/Counter unit], and for those drivers that already ioremap() their registers [UART]. Also, the Ethernet driver now uses the platform_device resources but doesn't yet use ioremap() so we need to pass it the virtual address instead of the physical address. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3869/1: AT91: NAND support for DK and KB9202 boardsAndrew Victor2006-09-282-0/+50
| | | | | | | | This patch adds support for the NAND flash on the Atmel AT91RM9200-DK and KwikByte KB920x boards. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3867/1: AT91 GPIO updateAndrew Victor2006-09-2813-126/+156
| | | | | | | | | | This patch makes the AT91 gpio.c support processor-generic (AT91RM9200 and AT91SAM9xxx). The GPIO controllers supported by a particular AT91 processor are defined in the processor-specific file and are registered with gpio.c at startup. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3866/1: AT91 clock updateAndrew Victor2006-09-2813-278/+299
| | | | | | | | | | This patch makes the AT91 clock.c support processor-generic (AT91RM9200 and AT91SAM9xxx). The clocks supported by a particular AT91 processor are defined in the processor-specific file and are registered with clock.c at startup. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3865/1: AT91RM9200 header updatesAndrew Victor2006-09-286-83/+83
| | | | | | | | | | | | | | | This is more preparation for adding support for the new Atmel AT91SAM9 processors. Changes include: - Replace AT91_BASE_* with AT91RM9200_BASE_* - Replace AT91_ID_* with AT91RM9200_ID_* - ROM, SRAM and UHP address definitions moved to at91rm9200.h. - The raw AT91_P[ABCD]_* definitions are now depreciated in favour of the GPIO API. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3739/1: genirq updates: irq_chip, add and use irq_chip.nameDavid Brownell2006-08-012-2/+4
| | | | | | | | | | | | | | | | | | | Patch from David Brownell ARM genirq cleanups/updates: - Start switching platforms to newer APIs * use "irq_chip" name, not "irqchip" * providing irq_chip.name - Show irq_chip.name in /proc/interrupts, like on x86. This update a bit more than half of the ARM code. The irq_chip.name values were chosen to match docs (if I have them) or be otherwise obvious ("FPGA", "CPLD", or matching the code). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3711/1: AT91 timer updateAndrew Victor2006-07-053-57/+66
| | | | | | | | | | | | | Patch from Andrew Victor The AIC interrupt controller is the same on the Atmel AT91RM9200, AT91SAM9261 and AT91SAM9260 processors. This patch removes any RM9200-specific naming from the IRQ driver, and moves the AT91RM9200's default IRQ priority table into at91rm9200.c. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] ARM: fixup irqflags breakage after ARM genirq mergeThomas Gleixner2006-07-021-1/+1
| | | | | | | | | | The irgflags consolidation did conflict with the ARM to generic IRQ conversion and was not applied for ARM. Fix it up. Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge branch 'genirq' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2006-07-022-6/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'genirq' of master.kernel.org:/home/rmk/linux-2.6-arm: (24 commits) [ARM] 3683/2: ARM: Convert at91rm9200 to generic irq handling [ARM] 3682/2: ARM: Convert ixp4xx to generic irq handling [ARM] 3702/1: ARM: Convert ixp23xx to generic irq handling [ARM] 3701/1: ARM: Convert plat-omap to generic irq handling [ARM] 3700/1: ARM: Convert lh7a40x to generic irq handling [ARM] 3699/1: ARM: Convert s3c2410 to generic irq handling [ARM] 3698/1: ARM: Convert sa1100 to generic irq handling [ARM] 3697/1: ARM: Convert shark to generic irq handling [ARM] 3696/1: ARM: Convert clps711x to generic irq handling [ARM] 3694/1: ARM: Convert ecard driver to generic irq handling [ARM] 3693/1: ARM: Convert omap1 to generic irq handling [ARM] 3691/1: ARM: Convert imx to generic irq handling [ARM] 3688/1: ARM: Convert clps7500 to generic irq handling [ARM] 3687/1: ARM: Convert integrator to generic irq handling [ARM] 3685/1: ARM: Convert pxa to generic irq handling [ARM] 3684/1: ARM: Convert l7200 to generic irq handling [ARM] 3681/1: ARM: Convert ixp2000 to generic irq handling [ARM] 3680/1: ARM: Convert footbridge to generic irq handling [ARM] 3695/1: ARM drivers/pcmcia: Fixup includes [ARM] 3689/1: ARM drivers/input/touchscreen: Fixup includes ... Manual conflict resolved in kernel/irq/handle.c (butt-ugly ARM tickless code).
| * [ARM] 3683/2: ARM: Convert at91rm9200 to generic irq handlingThomas Gleixner2006-07-012-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | Patch from Thomas Gleixner From: Thomas Gleixner <tglx@linutronix.de> Fixup the conversion to generic irq subsystem. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2006-07-024-23/+76
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits) [ARM] 3541/2: workaround for PXA27x erratum E7 [ARM] nommu: provide a way for correct control register value selection [ARM] 3705/1: add supersection support to ioremap() [ARM] 3707/1: iwmmxt: use the generic thread notifier infrastructure [ARM] 3706/2: ep93xx: add cirrus logic edb9315a support [ARM] 3704/1: format IOP Kconfig with tabs, create more consistency [ARM] 3703/1: Add help description for ARCH_EP80219 [ARM] 3678/1: MMC: Make OMAP MMC work [ARM] 3677/1: OMAP: Update H2 defconfig [ARM] 3676/1: ARM: OMAP: Fix dmtimers and timer32k to compile on OMAP1 [ARM] Add section support to ioremap [ARM] Fix sa11x0 SDRAM selection [ARM] Set bit 4 on section mappings correctly depending on CPU [ARM] 3666/1: TRIZEPS4 [1/5] core ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE ARM: OMAP: Update dmtimers ARM: OMAP: Make clock variables static ARM: OMAP: Fix GPMC compilation when DEBUG is defined ARM: OMAP: Mux updates for external DMA and GPIO ...
| * [ARM] 3675/2: Preparing for AT91SAM926 supportAndrew Victor2006-06-294-23/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Remove obsolete #include <linux/config.h>Jörn Engel2006-06-309-9/+0
|/ | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [ARM] 3654/1: add ajeco 1arm sbc supportLennert Buytenhek2006-06-263-0/+116
| | | | | | | | | | | | Patch from Lennert Buytenhek This patch adds support for the Ajeco 1ARM Single Board Computer, a VME form factor SBC based on the Atmel AT91 SoC, with 64M RAM, seven serial ports, three ethernet ports, IDE, CF, USB host and device, and S-Video/VGA out.-- Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Include asm/hardware.h not asm/arch/hardware.hRussell King2006-06-2012-12/+12
| | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3599/1: AT91RM9200 remove global variablesAndrew Victor2006-06-202-15/+1
| | | | | | | | | | Patch from Andrew Victor This patch removes some now unnecessary global variables - at91_master_clock, at91_serial_map, at91_console_port. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3607/1: AT91RM9200 misc fixesAndrew Victor2006-06-201-0/+7
| | | | | | | | | | | | | | | Patch from Andrew Victor This final patch includes some general fixes. 1. Link in pm.o if CONFIG_PM is enabled. [Should have been included in patch 3605/1]. 2. Use __raw_readl()/__raw_writel() when accessing System Peripheral registers. 3. Removed some unnecessary includes Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3605/1: AT91RM9200 Power ManagementAndrew Victor2006-06-202-0/+232
| | | | | | | | | | | | | | | | | | | | Patch from Andrew Victor This patch adds the core Power Management support for the AT91RM9200 processor. It will support suspend-to-RAM and standby modes. The suspend-to-RAM functionality is not 100% complete. The code that needs to be execute from the internal SRAM to restore the system is outstanding. For now we just fall through to Standby mode. The AT91-specific at91_suspend_entering_slow_clock() function will eventually be replaced by clk_must_disable() once that functionality is added to mainline clock API. Patch from David Brownell. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3604/1: AT91RM9200 New boardsAndrew Victor2006-06-206-4/+520
| | | | | | | | | | | | | | | | | | | | | Patch from Andrew Victor This patch adds support for an additional 4 AT91RM9200-based boards: 1. Conitec ARM&EVA [MACH_CARMEVA] (http://www.conitec.net/english/linuxboard.htm) 2. KwikByte KB920x [MACH_KB9200] (http://kwikbyte.com/KB9202_description_new.htm) 3. Embest ATEB9200 [MACH_ATEB9200] (http://www.embedinfo.com/english/product/ATEB9200.asp) 4. Sperry-Sun KAFA board [MACH_KAFA] (unknown) Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3589/1: AT91RM9200 DK/EK board updateAndrew Victor2006-06-192-32/+72
| | | | | | | | | | | | | | | | Patch from Andrew Victor This patch updates the support for the Atmel DK and EK boards. The changes include: 1. Use the new at91_uart_config structure and device registration functions for the UARTs. 2. Registration of I2C and SPI platform devices. 3. The USB Device pullup line is connected to reset, so multidrive needs to be enabled on the line. [Patch from David Brownell]. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3588/1: AT91RM9200 CSB337/637 board updateAndrew Victor2006-06-192-34/+39
| | | | | | | | | | | | | | | | Patch from Andrew Victor This patch updates the support for the Cogent CSB337 and CSB637 boards. The changes include: 1. Use the new at91_uart_config structure and device registration functions for the UARTs. 2. Registration of I2C and SPI platform devices. 3. The CSB337 board uses PB0 & PB1 (and not PB2) for the LEDs. [Patch from David Brownell] Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3585/1: AT91RM9200 Platform devicesAndrew Victor2006-06-191-17/+389
| | | | | | | | | | | | | | | | | | | | | | | | Patch from Andrew Victor This patch updates the platform device support for the AT91RM9200. The changes include: 1. USB Host device renamed to "at91_ohci" since the driver is also usable on the AT91SAM9261 processor. 2. Enabling multidrive on the USB Device's pullup pin should not be done for all boards. Moved into board-specific files. [Patch from David Brownell] 3. Move enabling of PCMCIA/Compact Flash pins out of the driver. 4. Added SPI device and resources. 5. Added Watchdog device and resources. [Patch from David Brownell] 6. Added UART device and resources. 7. The simple devices (watchdog, rtc, i2c) are now automatically registered and don't have to be registered separately in each board-specific file. [Patch from David Brownell] Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3584/1: AT91RM9200 GPIO suspend/resume supportAndrew Victor2006-06-191-3/+84
| | | | | | | | | | | | Patch from Andrew Victor This patch adds suspend/resume/set_wake support for the AT91RM9200's GPIO interrupts. Original patch from David Brownell. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3583/1: AT91RM9200 IRQ suspend/resume supportAndrew Victor2006-06-191-0/+36
| | | | | | | | | | Patch from Andrew Victor Added suspend/resume/set_wake support for the AT91RM9200's AIC interrupt controller. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3582/1: AT91RM9200 IRQ trigger typesAndrew Victor2006-06-191-4/+4
| | | | | | | | | | | | | Patch from Andrew Victor The AIC interrupt controller's set_irq_type() can also be used for internal interrupts. IRQT_LOW and IRQT_FALLING are the only options not supported for the internal interrupts. [Original patch from Karl Olsen] Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3581/1: AT91RM9200 Internal SRAMAndrew Victor2006-06-191-0/+6
| | | | | | | | | | Patch from Andrew Victor This patch maps the AT91RM9200's internal SRAM into the virtual memory address space - just below the internal peripheral registers. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3580/1: AT91RM9200 Timer suspend/resume supportAndrew Victor2006-06-191-14/+30
| | | | | | | | | Patch from Andrew Victor Added suspend/resume support for the AT91RM9200 timer. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3579/1: AT91RM9200 Timer simplificationAndrew Victor2006-06-191-7/+6
| | | | | | | | | | | | | | | Patch from Andrew Victor Use a global variable 'last_crtr' to store the time of the last timer tick instead of the ST_RTAR register. It's faster, frees up the ST_RTAR register for other uses, and hopefully makes the code more understandable. [Patch from Peter Menzebach] Also add the SA_TIMER flag to Timer IRQ. (It seems to be required for the realtime preempt patch). Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3578/1: AT91RM9200 Clock updateAndrew Victor2006-06-191-20/+101
| | | | | | | | | | | | | | | | | Patch from Andrew Victor Some updates to the clock infrastructure for the AT91RM9200. 1. Hard-coded values replaced with names defined in at91rm9200_sys.h. 2. Added the four PIO clocks, which are enabled at startup. 3. At startup, disable all unused clocks. 4. Minor bugfix for usage counts associated with MCK. [Patch from David Brownell] 5. Added at91_clock_associate() function to associate device & function with a particular clock. [Patch from David Brownell] Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Fix AT91RM9200 build breakageDavid Brownell2006-04-141-1/+11
| | | | | | | | | | | | | The at91_cf driver got out of sync with certain changes in the PCMCIA layer, notably getting rid of some duplication of data ... causing the version merged to kernel.org to fail compiling. This patch gives the at91_cf platform device a new iomem resource, using it so this new pcmcia scheme works. It also cleans up some whitepsace bugs that have accumulated over time (mostly too-long lines). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [ARM] 3396/2: AT91RM9200 Platform devices updateAndrew Victor2006-04-021-8/+127
| | | | | | | | | | | | | Patch from Andrew Victor This patch updates the platform device resources for the Ethernet and MMC peripherals. It also adds platform device information for the NAND (SmartMedia), I2C and the RTC. (This version of the patch can be applied before Patch 3392/1) Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3395/2: AT91RM9200 Dataflash Card vs MMC selectionAndrew Victor2006-04-022-2/+12
| | | | | | | | | | | | | | Patch from Andrew Victor On the Atmel AT91RM9200-DK and -EK boards, a pin is used to control whether the card socket is used for a DataFlash Card or an MMC/SD card. We now default to MMC/SD in the configuration files. (This version of the patch can be applied before Patch 3392/1) Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3393/2: AT91RM9200 LED supportAndrew Victor2006-04-027-4/+136
| | | | | | | | | | | Patch from Andrew Victor This patch adds support for the LED(s) on the AT91RM9200-based boards. (This version of the patch can be applied before Patch 3392/1) Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3386/1: AT91RM9200 Clock updateAndrew Victor2006-03-221-12/+73
| | | | | | | | | | | | | | | | | | | | Patch from Andrew Victor This patch includes a few changes to the clock support on the AT91RM9200. 1. Added definitions for Ethernet, MMC, TWI, USARTs, and SPI peripheral clocks. 2. Replaced some hard-coded hex values with the text definitions in at91rm9200_sys.h. 3. If the USB96M bit is set for PLLB, then the rate of PLLB is not affected but only the USB Host/Device clocks which are derived from it. Issue reported by Sergei Sharonov. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3384/1: AT91RM9200: TimerAndrew Victor2006-03-221-2/+2
| | | | | | | | | | | | | | Patch from Andrew Victor If the timer interrupt is ever significantly delayed (or after the system was suspended), the system could spin incrementing the time for too long. The fix is to replace the "do {} while" with a "while {}". Orignal patch by Savin Zlobec and Peter Menzebach. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Rename chipdata to 'base' and make it an iomem pointerRussell King2006-03-211-2/+2
| | | | | | | | In all current use cases, "chipdata" is used to store an iomem address. Mark it with __iomem, and rename it to 'base'. Leave the accessor macros alone. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3348/1: Disable GPIO interruptsAndrew Victor2006-02-241-2/+12
| | | | | | | | | | | | | Patch from Andrew Victor disable_irq() lazily disables the interrupt, so the IRQ is only disabled once the interrupt occurs again. The GPIO interrupt handler therefore must first check disable_depth to see if the IRQ needs to be disabled. Orignal patch by Bill Gatliff. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3325/2: GPIO function to control multi-drive (open collector) capabilityAndrew Victor2006-02-222-1/+20
| | | | | | | | | | | | | | | | | | | Patch from Andrew Victor This patch adds the at91_set_multi_drive() function to enable/disable the multi-drive (open collector) pin capability on the AT91RM9200 processor. This is necessary to fix the UDC (USB Gadget) driver for the AT91RM9200 board as it will not allow the board reset line to be pulled low if the pullup is not driven as an open collector output as the boards are wired to the USB connector on both the DK/EK. This version of the patch updates it to 2.6.16-rc4. Orignal patch by Jeff Warren. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3260/1: remove phys_ram from struct machine_desc (part 2)Nicolas Pitre2006-01-134-4/+0
| | | | | | | | | | | | Patch from Nicolas Pitre This field is redundent since it must be equal to PHYS_OFFSET anyway. Now that no code uses it anymore, mark it deprecated and remove all initializations from the tree. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3247/1: AT91RM9200 support for 2.6 (Cogent CSB337 & CSB637 boards) (PatchAndrew Victor2006-01-103-2/+261
| | | | | | | | | | | | | | #3244) Patch from Andrew Victor This patch adds support to the 2.6 kernel series for the Atmel AT91RM9200 processor. This patch is the support for the Cogent CSB337 and CSB637 boards. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3243/2: AT91RM9200 support for 2.6 (Atmel DK & EK boards)Andrew Victor2006-01-103-2/+271
| | | | | | | | | | | | Patch from Andrew Victor This patch adds support to the 2.6 kernel series for the Atmel AT91RM9200 processor. This patch is the support for Atmel's DK and EK boards. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3240/2: AT91RM9200 support for 2.6 (Core)SAN People2006-01-0910-0/+1733
Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
OpenPOWER on IntegriCloud