summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts
Commit message (Collapse)AuthorAgeFilesLines
...
| | * | | | | | | | | | | ARM: dts: exynos5420: add nodes for jpeg codecAndrzej Pietrasiewicz2015-06-031-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add nodes for jpeg codec in Exynos5420 SoC. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> [k.kozlowski: fixed up minor differences for applying] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: s3c2416: Use labels for overriding nodes in SMDK2416Krzysztof Kozlowski2015-06-031-43/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: s3c2416: Add labels to S3C2416 nodesKrzysztof Kozlowski2015-06-031-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add new labels to certain nodes on S3C2416 so they could be easily referenced by board DTS files. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use labels for overriding nodes in exynos5422-odroidxu3Krzysztof Kozlowski2015-06-031-286/+287
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use labels for overriding nodes in exynos5440 boardsKrzysztof Kozlowski2015-06-032-48/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use labels for overriding nodes in exynos5420-smdk5420Krzysztof Kozlowski2015-06-031-322/+323
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use labels for overriding nodes in exynos542xKrzysztof Kozlowski2015-06-033-43/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Additionally remove duplicated serial and uart labels for serial. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use labels for overriding nodes in exynos5420-arndale-octaKrzysztof Kozlowski2015-06-031-317/+317
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Remove duplicated I2C7 nodes in exynos5250-snowKrzysztof Kozlowski2015-06-031-24/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The i2c_7 node (i2c@12CD0000) with LVDS bridge child node was put in Exynos5250 Snow DTS file twice. Move the LVDS bridge to proper existing i2c_7 node. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use labels for overriding nodes in exynos5250Krzysztof Kozlowski2015-06-031-41/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Add labels to exynos5 nodesKrzysztof Kozlowski2015-06-032-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add new labels to certain nodes so they could be easily referenced by Exynos5 board DTS files. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: exynos5422-odroidxu3: Hook up PWM and use it for LEDsPeter Chubb2015-06-031-14/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PWM output wasn't working because it wasn't hooked up to its pincontrol. This patch: - hooks up PWM to its pincontrol, and documents what the outputs are on the XU3 - switches the LEDs that are on PWM outputs to use PWM rather than GPIO. The main effect is that the brightness of the LEDs can be controlled, and user-mode fan control is enabled via /sys/class/pwm Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use labels for overriding nodes in exynos4412-tiny4412Krzysztof Kozlowski2015-06-031-27/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use labels for overriding nodes in exynos4412-origenKrzysztof Kozlowski2015-06-031-446/+446
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use labels for overriding nodes in exynos4412-trats2Krzysztof Kozlowski2015-06-031-665/+667
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use labels for overriding nodes in exynos4412-smdk4412Krzysztof Kozlowski2015-06-031-105/+105
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use labels for overriding nodes in exynos4412-odroidKrzysztof Kozlowski2015-06-032-374/+374
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> For thermal zones: Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use labels for overriding nodes in exynos4412Krzysztof Kozlowski2015-06-031-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use labels for overriding nodes in exynos4x12Krzysztof Kozlowski2015-06-031-108/+108
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use labels for overriding nodes in exynos4212Krzysztof Kozlowski2015-06-031-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use labels for overriding nodes in exynos4210-tratsKrzysztof Kozlowski2015-06-031-296/+296
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use labels for overriding nodes in exynos4210-smdkv310Krzysztof Kozlowski2015-06-031-140/+140
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use labels for overriding nodes in exynos4210-origenKrzysztof Kozlowski2015-06-031-209/+209
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use labels for overriding nodes in exynos4210Krzysztof Kozlowski2015-06-031-22/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Add labels to exynos4 nodesKrzysztof Kozlowski2015-06-034-19/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add new labels to certain nodes so they could be easily referenced by Exynos4 board DTS files. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | Merge branch 'v4.2-next/dt-samsung-3rd' into v4.2-next/dt-samsung-4thKukjin Kim2015-06-0311-27/+186
| | |\ \ \ \ \ \ \ \ \ \ \ | | | |_|_|_|/ / / / / / / | | |/| | | | | | | | | |
| * | | | | | | | | | | | Merge tag 'v4.1-rc6' into next/dtKevin Hilman2015-06-1114-15/+20
| |\ \ \ \ \ \ \ \ \ \ \ \ | | |/ / / / / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux 4.1-rc6 Conflicts: arch/arm/boot/dts/zynq-7000.dtsi Resolution summary: Mainline had an earlier version of the commit, resolve in favor of the newer patch in next/dt branch.
| * | | | | | | | | | | | Merge tag 'samsung-dt-3' of ↵Kevin Hilman2015-06-1111-27/+186
| |\ \ \ \ \ \ \ \ \ \ \ \ | | | |/ / / / / / / / / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt Samsung DT updates for v4.2 - for exyos3250 : use s3c6410-rtc instead of exynos3250-rtc : add JPEG codec node and support it on exynos3250-rinato : use s3c-rtc clock id for exynos3250-rinato and monk boards - for exynos4 : add JPEG codec node and syscon property to MIPI DPHY : remove obsolete MIPI DPHY reg property : enable s3c-rtc on exynos4412-trats2 - for exynos5 : add syscon property to MIPI DPHY for exynos5420 : enable s3c-rtc on exynos5420-arndale-octa : add missing irq pinctrl for max77686 on exynos5250-smdk5250 : clk: add bindings for 32kHz clocks from s2mps11 : fix pinctrl for s2mps11-irq on exynos5420-arndale-octa - for exynos5422-odroidxu3 : add mmc detect gpio and LEDs : add HS400 support, simple-audio-card and rtc_src clock * tag 'samsung-dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Add syscon property to the MIPI DPHY for exynos4415 ARM: dts: Remove obsolete MIPI DPHY 'reg' property for exynos4 ARM: dts: Use last parent for clocks during power domain on/off ARM: dts: add support JPEG codec for exynos3250-rinato ARM: dts: support simple-audio-card for exynos5420 and exynos5422-odroidxu3 ARM: dts: add jpeg-codec node for exynos4 and exynos4x12 ARM: dts: Enable S3C RTC on exynos4412-trats2 and exynos5420-arndale-octa ARM: dts: Use define for s3c-rtc clock id for exynos3250-monk ARM: dts: Use define for s3c-rtc clock id for exynos3250-rinato ARM: dts: Use s3c6410-rtc instead of exynos3250-rtc for exynos3250/4415 ARM: dts: add 'rtc_src' clock to rtc node for exynos5422-odroidxu3 clk: samsung: Add bindings for 32kHz clocks from s2mps11 ARM: dts: fix pinctrl for s2mps11-irq on exynos5420-arndale-octa ARM: dts: Add syscon property to the MIPI phy in exynos5420 ARM: dts: Add HS400 support for exynos5422-odroidxu3 ARM: dts: Add LEDs for exynos5422-odroidxu3 ARM: dts: add mmc detect gpio for exynos5422-odroidxu3 ARM: dts: add JPEG codec device node for exynos3250 ARM: dts: Add missing irq pinctrl for max77686 on smdk5250
| | * | | | | | | | | | | ARM: dts: Add syscon property to the MIPI DPHY for exynos4415Krzysztof Kozlowski2015-06-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since e4b3d38088df ("phy: exynos-video-mipi: Fix regression by adding support for PMU regmap") the Exynos PMU driver provides regmap to access the MIPI DPHY registers. The MIPI DPHY driver accesses this regmap through syscon phandle. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Remove obsolete MIPI DPHY 'reg' property for exynos4Krzysztof Kozlowski2015-06-031-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since e4b3d38088df ("phy: exynos-video-mipi: Fix regression by adding support for PMU regmap") the Exynos PMU driver provides regmap to access the MIPI DPHY registers. The MIPI DPHY node uses a phandle to syscon to get this regmap. The 'reg' field is obsolete. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use last parent for clocks during power domain on/offKrzysztof Kozlowski2015-06-031-9/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace fixed parent with last parent (obtained with clk_get_parent()) of clocks for devices in mfc and disp power domains. This should improve behavior if such clocks were reparented by the drivers and new parents are different than those specified in DTS. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: add support JPEG codec for exynos3250-rinatoJacek Anaszewski2015-05-171-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support jpeg for exynos3250-rinato board. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: support simple-audio-card for exynos5420 and exynos5422-odroidxu3Inha Song2015-05-172-0/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add MAX98090 audio codec, I2S interface and the sound nodes to support audio on exynos5422-odroidxu3 board. Now we can support audio using simple-audio-card DT binding. Signed-off-by: Inha Song <ideal.song@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: add jpeg-codec node for exynos4 and exynos4x12Marek Szyprowski2015-05-172-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds nodes for hardware JPEG codec found in exynos4210 and exynos4x12 SoCs. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Enable S3C RTC on exynos4412-trats2 and exynos5420-arndale-octaKrzysztof Kozlowski2015-05-173-6/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend the S3C RTC node with rtc_src clock so it could be operational. The rtc_src clock is provided by MAX77686 (Trats2) or S2MPS11 (Arndale Octa). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use define for s3c-rtc clock id for exynos3250-monkKrzysztof Kozlowski2015-05-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use a define instead of raw number as a ID for "rtc_src" clock. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use define for s3c-rtc clock id for exynos3250-rinatoKrzysztof Kozlowski2015-05-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use a define instead of raw number as a ID for "rtc_src" clock. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Use s3c6410-rtc instead of exynos3250-rtc for exynos3250/4415Krzysztof Kozlowski2015-05-172-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mark "samsung,exynos3250-rtc" compatible as deprecated because it duplicates the "samsung,s3c6410-rtc". Use "samsung,s3c6410-rtc" on Exynos3250 and Exynos4415 boards. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: add 'rtc_src' clock to rtc node for exynos5422-odroidxu3Markus Reichl2015-05-171-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Exynos5422 SoC has a s3c6410 RTC where the source clock is now a mandatory property. This patch fixes probe failure of s3c-rtc on Odroid-XU3 boards. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: fix pinctrl for s2mps11-irq on exynos5420-arndale-octaKrzysztof Kozlowski2015-05-171-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Arndale Octa the S2MPS11 RTC alarm interrupt was not handled at all because of wrong configuration of interrupt and gpx3-2. 1. Interrupt is signaled by falling edge. 2. This GPIO line is hard-wired on the board to PVDD_APIO_1V8 through a resistor so pull-up/down must be disabled. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Add syscon property to the MIPI phy in exynos5420Tomeu Vizoso2015-05-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit e4b3d38088df ("phy: exynos-video-mipi: Fix regression by adding support for PMU regmap") the syscon property is required in samsung,s5pv210-mipi-video-phy nodes, but this DTS hadn't been updated yet. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Add HS400 support for exynos5422-odroidxu3Markus Reichl2015-05-131-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HS400 timing values are added for exynos5422-odroidxu3 board. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Add LEDs for exynos5422-odroidxu3Markus Reichl2015-05-091-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the RGB-LED on XU3 as 3 gpio-leds. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: add mmc detect gpio for exynos5422-odroidxu3Andrzej Hajda2015-05-091-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds gpio for detecting presence of MMC card. It fixes issue with kernel hang when MMC card is missing. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: add JPEG codec device node for exynos3250Jacek Anaszewski2015-05-091-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | | | | | | | | ARM: dts: Add missing irq pinctrl for max77686 on smdk5250Yadwinder Singh Brar2015-05-091-0/+12
| | | |_|_|_|_|/ / / / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds pinctrl configuration for using configuring gpx3-2 as an external interrupt from max77686. Though max77686 RTC is enabled and gets probed by default, it doesnt work as its unable to get interrupt. This patch makes max77686 RTC work and also configures it as wakeup source. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> [pankaj.dubey: resubmitted after rebasing to latest kgene tree] Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Pankaj Dubey <pankaj.dubey@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| * | | | | | | | | | | ARM: nomadik: set proper compatible for accelerometerLinus Walleij2015-06-111-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adjust device tree entry to the proper registered compatible string for LIS3LV02DL. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
| * | | | | | | | | | | ARM: at91/dt: sama5d4: fix dma conf for aes, sha and tdes nodesludovic.desroches@atmel.com2015-06-101-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The xdmac channel configuration is done in one cell not two. This error prevents from probing devices correctly. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Fixes: 83906783b766 ("ARM: at91/dt: sama5d4: add aes, sha and tdes nodes") Cc: stable@vger.kernel.org # 4.1 Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
| * | | | | | | | | | | Merge tag 'at91-dt4' of ↵Kevin Hilman2015-06-1018-24/+123
| |\ \ \ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt Fourth batch of DT changes for 4.2: - rtc node for at91sam9rl/at91sam9rlek - move to stdout-path for console on kizbox and all Atmel's boards - Addition of the Acme Systems' Arietta G25 - two little fixes for Kizbox and sama5d4ek * tag 'at91-dt4' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/dt: sama5d4ek: mci0 uses slot 0 ARM: at91/dt: kizbox: fix mismatch LED PWM device ARM: at91/dt: Add Acme Arietta G25 ARM: at91/dt: sama5d4 xplained: use stdout-path ARM: at91/dt: sama5d4ek: use stdout-path ARM: at91/dt: sama5d3 xplained: use stdout-path ARM: at91/dt: sama5d3xek: use stdout-path ARM: at91/dt: at91sam9x5ek: use stdout-path ARM: at91/dt: at91sam9rlek: use stdout-path ARM: at91/dt: at91sam9n12ek: use stdout-path ARM: at91/dt: at91sam9m10g45ek use stdout-path ARM: at91/dt: at91sam9g20ek: use stdout-path ARM: at91/dt: at91sam9263ek: use stdout-path ARM: at91/dt: at91sam9261ek: use stdout-path ARM: at91/dt: at91rm9200ek: use stdout-path ARM: at91/dt: kizbox: use stdout-path ARM: at91/dt: at91sam9rlek: add RTC ARM: at91/dt: at91sam9rl: fix rtc node
| | * | | | | | | | | | | ARM: at91/dt: sama5d4ek: mci0 uses slot 0Ludovic Desroches2015-06-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mci0 uses slot 0 not 1. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Fixes: 7a4752677c44 ("ARM: at91: dt: add device tree file for SAMA5D4ek board") Cc: stable@vger.kernel.org Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
OpenPOWER on IntegriCloud