summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: mx53: Remove 'enable-active-low' propertyFabio Estevam2014-02-103-3/+0
| | | | | | | | | | | | | | | | 'enable-active-low' is not a valid property for a GPIO controlled regulator. According to Documentation/devicetree/bindings/regulator/gpio-regulator.txt: "Optional properties: ... - enable-active-high : Polarity of GPIO is active high (default is low)." ,so the correct way to define an active-low GPIO controlled regulator is to simply not pass 'enable-active-high'. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27-phytec-phycard-s-rdk: Add pinctrl definitions for SDHC2Alexander Shiyan2014-02-101-0/+14
| | | | | | | | This patch adds pinctrl definitions for SDHC2 for Phytec PCA100 RDK board. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27-phytec-phycard-s-som: Add NFC nodeAlexander Shiyan2014-02-101-0/+21
| | | | | | | | This patch adds the NFC devicetree node for Phytec PCA100 module. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27-phytec-phycard-s-som: Sort entriesAlexander Shiyan2014-02-101-18/+18
| | | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx28-m28cu3: Remove 'reset-active-high'Fabio Estevam2014-02-091-1/+0
| | | | | | | | The 'reset-active-high' property is not defined anywhere, so just remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx5: use imx51-ssiMarkus Pargmann2014-02-092-5/+12
| | | | | | | | | imx51-ssi and imx21-ssi are different IPs. imx51-ssi supports online reconfiguration and needs this for correct interaction with SDMA. This patch adds imx51-ssi before each imx21-ssi for all imx5 SoCs. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx51: Add mmc aliasesSascha Hauer2014-02-091-0/+4
| | | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx53: Add mmc aliasesSascha Hauer2014-02-091-0/+4
| | | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx53: add support for Ka-Ro TX53 modulesLothar Waßmann2014-02-094-41/+1027
| | | | | | | | | | This patch adds support for the Ka-Ro electronics GmbH TX53 modules. There are two distinct module types. One with an LVDS display interface and SATA support, the other with a parallel LCD interface and no SATA interface. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard.Denis Carikli2014-02-093-0/+225
| | | | | | | | | | | | | | | | | | | | | The following devices/functionalities were added: * Main and secondary UARTs. * i2c and the pcf8563 device. * Ethernet. * NAND. * The BP1 button. * The LED. * Watchdog * SD. Cc: Eric Bénard <eric@eukrea.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Denis Carikli <denis@eukrea.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx28-apf28dev: add user buttonSébastien Szymanski2014-02-091-0/+11
| | | | | Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: i.MX51: Switch to use standard definitions for input subsystemAlexander Shiyan2014-02-092-17/+20
| | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: i.MX53: add support for MCIMX53-START-RSteffen Trumtrar2014-02-092-0/+159
| | | | | | | | | | | | | | | | | | | | | | | The "Start-R QSB" has a different PMIC than the older "Start QSB". Add a new devicetree for the Start-R. They both could use the same DT, as both PMICs (the dialog and the mc34708) have different i2c addresses and could coexist in the same DT without any errors. But once phandles are used, this will get messy. The pmic nodes are based on an earlier patch [PATCH] arm: imx53-qsb: Add Ripley driver DT nodes from Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> which apparently got lost/abandoned. I added phandles/newlines and changed the node name from ripley to mc34708. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: i.MX53: move common QSB nodes to new fileSteffen Trumtrar2014-02-092-320/+337
| | | | | | | | | | | | | There are (atleast) two versions of the i.MX53 LOCO: - the MCIMX53-START board - the MCIMX53-START-R board The MCIMX53-START-R has a mc34708 pmic and is otherwise the similar to the MCIMX53-START. To prepare for the START-R, move all common nodes to a new imx53-qsb-common.dtsi and remove everything but the board name and pmic from the imx53-qsb.dts. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx53-evk: Remove board supportAlexander Shiyan2014-02-092-190/+0
| | | | | | | | | | imx53-evk board is discontinued by Freescale. The replacement is imx53-qsb. Additionally this board is not supported by anyone and in their current state is non-functional, for example PMIC not have an IRQ line defined, so it is not works. This patch removes this DTS. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: vf610: use the interrupt macrosHuang Shijie2014-02-091-18/+19
| | | | | | | | | | | | This patch uses the IRQ_TYPE_LEVEL_HIGH/IRQ_TYPE_NONE to replace the hardcode. [shawn.guo: While at it, we also fix the typo in uart0 interrupts property, where the 0x00 should 0x04. Hense, it should also be IRQ_TYPE_LEVEL_HIGH just like other UART instances.] Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx53: Add gpio and input dt includes.Denis Carikli2014-02-091-0/+2
| | | | | | | | | | | | | | | | | This is to permit to use of the includes in the boards dts. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Grant Likely <grant.likely@linaro.org> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: i.MX27: Add SSI nodesAlexander Shiyan2014-02-091-0/+24
| | | | | | | | This patch adds the missing (Synchronous Serial Interface) SSI1 & SSI2 devicetree nodes for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: mxs: add mxs phy controller idPeter Chen2014-02-092-0/+3
| | | | | | | | We need to use controller id to access different register regions for mxs phy. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27-phytec-phycore-rdk: Add pinctrl definitions for WEIMAlexander Shiyan2014-02-091-0/+10
| | | | | | | | This patch adds pinctrl definitions for WEIM CS4 and GPIO used as CAN IRQ line. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27-phytec-phycore-rdk: Add pingrp for SDHCAlexander Shiyan2014-02-091-0/+15
| | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27-phytec-phycore-som: Add spi-cs-high property to PMICAlexander Shiyan2014-02-091-1/+2
| | | | | | | | Since SPI core does not use GPIO bindings for CS GPIOs, we should add an active high level declaration. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27-phytec-phycore-rdk: Enable 1-Wire moduleAlexander Shiyan2014-02-091-0/+12
| | | | | | | This patch enables 1-Wire module for Phytec PCM-970 RDK. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27-phytec-phycore-som: Add NFC pin groupAlexander Shiyan2014-02-091-0/+14
| | | | | | | This patch adds pin group for NAND Flash Controller. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: Add support for the i.MX35.Steffen Trumtrar2014-02-091-0/+359
| | | | | | | | | | Cc: linux-arm-kernel@lists.infradead.org Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: mxs: Add iio-hwmon to mx23 socAlexandre Belloni2014-02-091-1/+6
| | | | | | | | | This allows to read the SoC on-die temperature sensor available on the LRADC by using: cat /sys/class/hwmon/hwmon0/device/temp1_input Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: mxs: Add iio-hwmon to mx28 socAlexandre Belloni2014-02-091-0/+5
| | | | | | | | | This allows to read the SoC on-die temperature sensor available on the LRADC by using: cat /sys/class/hwmon/hwmon0/device/temp1_input Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27-phytec-phycore-som: Rename file to .dtsiAlexander Shiyan2014-02-093-2/+1
| | | | | | | | PCM-038 module cannot be used standalone. This patch renames module file to .dtsi and excludes it from compilation. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27-phytec-phycore-som: Add pinctrl for CSPI1 and GPIOs used on ↵Alexander Shiyan2014-02-091-0/+12
| | | | | | | module Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: mxs: add #io-channel-cells to mx28 lradcAlexandre Belloni2014-02-091-0/+1
| | | | | | | | Adding #io-channel-cells property to lradc allows us to use the lradc as an iio provider. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: i.MX28: dts: rename usbphy pin namesMichael Grzeschik2014-02-098-11/+11
| | | | | | | | The pins have nothing todo with the phy layer. We better rename them, so it gets clear they are routed to the ehci core not to any phy. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.Denis Carikli2014-02-093-0/+248
| | | | | | | | | | | | | | | | | | | | | | | | The following devices/functionalities were added: * Main and secondary UARTs. * i2c and the pcf8563 device. * Ethernet. * NAND. * The BP1 button. * The LED. * Watchdog * SD. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: mxs: Add support for the eukrea-cpuimx28.Eric Bénard2014-02-094-0/+449
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following devices/functionalities were tested: * Main UART. * Ethernet0. * Ethernet1. * SD. * USB host. * USB otg. * Display(and its backlight). * Touchscreen. * Audio. * nand. * i2c and the pcf8563 device. * The gpio buttons. * The gpio leds. * Watchdog Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: mxs: Add a new pin config for the usb0 ID.Denis Carikli2014-02-091-0/+11
| | | | | | | | | | | | | Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: mxs: Add 18bit pin config for lcdif.Denis Carikli2014-02-091-0/+27
| | | | | | | | | | | | | Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx53: Enable AHCI SATA for imx53-qsbRobert Nelson2014-02-091-0/+4
| | | | | | | | Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Cc: Richard Zhu <r65037@freescale.com> Cc: Tejun Heo <tj@kernel.org> Cc: Linux-IDE <linux-ide@vger.kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: i.MX27: Configure GPIOs as "input" by defaultAlexander Shiyan2014-02-091-192/+192
| | | | | | | | | | This patch changes the default direction for pins used as GPIO to "input". This prevents a short circuit on the configuration stage when GPIO-pin is connected to the other output pin. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27-apf27dev: Add pinctrl for cspi, sdhci, leds and keysGwenhael Goavec-Merou2014-02-091-3/+31
| | | | | | | | | - add chip-select pinctrl for cspi - add card-detect for sdhci2 - add pinctrl for gpio-leds and gpio-keys Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: apf27dev: Add pwm supportGwenhael Goavec-Merou2014-02-091-0/+11
| | | | | Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: apf28dev: set gpio polarity for usb regulator and pinctrl for ↵Gwenhael Goavec-Merou2014-02-091-0/+13
| | | | | | | regulator gpio Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: i.MX27 boards: Switch to use standard GPIO and IRQ flags definitionsAlexander Shiyan2014-02-096-16/+20
| | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27-phytec-phycore-som: Update FEC nodeAlexander Shiyan2014-02-091-0/+16
| | | | | | | | | | This patch updates FEC devicetree node of Phytec PCM038 module: - Adding missing phy_mode properties. - Adding fixed regulator to provide functionality without dummy-regulator in the kernel. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27-phytec-phycore-rdk: Add DT node for camera moduleAlexander Shiyan2014-02-091-0/+22
| | | | | | | | This patch adds first I2C bus and PCA9536 device. This device is used on Phytec PCM-970 RDK camera addon module. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27-phytec-phycore-som: Add on-flash BBT supportAlexander Shiyan2014-02-091-0/+1
| | | | | | | | This patch adds support for On Flash Bad Block Table for PCM-038 onboard NAND. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27: imx27-apf27dev: add pinctrl for cspi, i2c, sdhc and framebufferGwenhael Goavec-Merou2014-02-091-0/+89
| | | | | Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27: imx27-apf27: add pinctrl for fec and uart1Gwenhael Goavec-Merou2014-02-091-0/+38
| | | | | Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx51-babbage: Define FEC reset pinAlexander Shiyan2014-02-091-0/+3
| | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1Alexander Shiyan2014-02-091-1/+1
| | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx28-evk: Run I2C0 at 400kHzFabio Estevam2014-02-091-0/+1
| | | | | | | It is safe to operate I2C0 at 400kHz as SGTL5000 supports this frequency. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27-apf27dev: fix display sizeGwenhael Goavec-Merou2014-02-091-2/+2
| | | | | Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
OpenPOWER on IntegriCloud