summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts
Commit message (Collapse)AuthorAgeFilesLines
* ARM: mvebu: use clocks property for serial portsThomas Petazzoni2014-04-264-0/+8
| | | | | | | | | | | | | | | | | | | | | | Back when the Armada 370 and Armada XP initial support was introduced, the only way to pass the clock frequency to the of_serial driver was through a clock-frequency Device Tree property. Thanks to 0bbeb3c3e84bc963d1c66661e082d207023b0e5c ('of serial port driver - add clk_get_rate() support'), it is possible to use the standard 'clocks' DT property to reference the clock used for a particular UART controller. This clock is then used by the of_serial driver to retrieve the clock rate. This commit modifies the SoC-level Device Tree files of Armada 370, Armada XP, Armada 375 and Armada 38x to use this possibility. Since there is no gatable clock for the UART controllers, we simply reference the TCLK, which is the main SoC clock for the peripherals. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1397806908-7550-4-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: mvebu: add Device Tree description of AHCI interfaces on Armada 38xThomas Petazzoni2014-04-262-0/+24
| | | | | | | | | | | | The Marvell Armada 38x processors contain two AHCI compatible interfaces. This commit adds the Device Tree description of those interfaces at the SoC level, and also enables them on the Armada 385 DB platform, which allows access to both interfaces through SATA ports. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1397574006-5868-4-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: mvebu: enable the SDHCI interface on Armada 385Thomas Petazzoni2014-04-252-0/+17
| | | | | | | | | | | | | | | In commit "mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller", the sdhci-pxav3 driver has been extended to also be usable on Armada 38x platforms. Therefore, this commit adds the necessary Device Tree informations to declare this SDHCI interface in the Armada 38x SoC, and also in the Armada 385 Development Board. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1397486478-16991-2-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: mvebu: add SMP support in the Armada 38x device treeThomas Petazzoni2014-04-243-0/+14
| | | | | | | | | | | This commit improves the Armada 38x Device Tree to add the CPU reset and PMSU Device Tree nodes as well as the declaration of the enabling method for the CPUs. These are needed to get SMP working on Armada 38x platforms. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1397483648-26611-12-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: mvebu: add SMP support in the Armada 375 device treeGregory CLEMENT2014-04-241-0/+7
| | | | | | | | | | | | Improve the Armada 375 Device Tree to add the CPU reset Device Tree node and declare the enabling method for CPUs, both of which are necessary to get SMP working. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1397483648-26611-11-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1397483648-26611-11-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: mvebu: add enable-method property for CPUsThomas Petazzoni2014-04-243-0/+3
| | | | | | | | | | | This commit updates the Armada XP Device Trees (for the three variants of Armada XP) to declare the "enable-method" property for the CPUs, which helps operating systems find the appropriate logic to manage the CPUs, especially to boot secondary CPUs. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1397483648-26611-4-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: mvebu: switch to the new PMSU binding in Armada 370/XP Device TreeGregory CLEMENT2014-04-243-3/+13
| | | | | | | | | | | | | | | | | | | | | | | Following the introduction of the new PMSU Device Tree binding, as well as the separate CPU reset binding, this commit switches the Armada 370 and Armada XP Device Trees to use them. The PMSU node is moved from the Armada XP specific armada-xp.dtsi to the common Armada 370/XP armada-370-xp.dtsi because the PMSU is in fact available at the same location on both SOCs. The CPU reset node is then added on both Armada 370 and Armada XP, with a different compatible string. On Armada 370, the CPU reset driver is not really needed as Armada 370 is single core and the only use of the CPU reset driver is to boot secondary processors, but it still makes sense to have this CPU reset register described in the Device Tree. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1397483433-25836-6-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1397483433-25836-6-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: mvebu: enable the coherency fabric on Armada 38xThomas Petazzoni2014-04-241-0/+10
| | | | | | | | | This commit adds the necessary Device Tree information to enable the coherency fabric on Armada 38x. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1397483228-25625-11-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: mvebu: enable the coherency fabric on Armada 375Thomas Petazzoni2014-04-241-0/+10
| | | | | | | | | This commit adds the necessary Device Tree information to enable the coherency fabric on Armada 375. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1397483228-25625-10-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: mvebu: Enable Armada 380/385 watchdog in the devicetreeEzequiel Garcia2014-04-241-0/+7
| | | | | | | | | | Add the DT nodes to enable the watchdog support available on Armada 380/385 SoC. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1397481813-4962-9-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: mvebu: Enable Armada 375 watchdog in the devicetreeEzequiel Garcia2014-04-241-0/+6
| | | | | | | | | | Add the DT nodes to enable the watchdog support available on Armada 375 SoC. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1397481813-4962-8-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: kirkwood: rename kirwood-nsa310-common to 3x0-commonAdam Baker2014-04-244-3/+3
| | | | | | | | | | | | Rename the include file kirkwood-nsa310-common.dtsi as it is now also used for NSA320. There is also an NSA325 but that appears not to be as similar so is unlikely to want to share an include file. Signed-off-by: Adam Baker <linux@baker-net.org.uk> Link: https://lkml.kernel.org/r/53447978.2020206@baker-net.org.uk Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: kirkwood: Add DTS file for NSA320Adam Baker2014-04-241-0/+214
| | | | | | | | | | | | | | Add a new DTS file to support the Zyxel NSA320 dual bay NAS Drive. This DTS just describes the features that work with the current kernel drivers. New drivers still need writing to support the temperature sensor, the power on behaviour control and the buzzer. Signed-off-by: Adam Baker <linux@baker-net.org.uk> Link: https://lkml.kernel.org/r/1396820569-3841-2-git-send-email-linux@baker-net.org.uk Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: kirkwood: Move NSA310 common parts to include fileAdam Baker2014-04-243-104/+54
| | | | | | | | | | | | | | Move definitions that are common to both nsa-310.dts and nsa310a.dts and that will also be used in nsa320 into kirkwood-nsa310-common.dtsi. Also rename the USB Regulator to remove the word off from its name as the state of a regulator shouldn't be part of its name. Signed-off-by: Adam Baker <linux@baker-net.org.uk> Link: https://lkml.kernel.org/r/1396820569-3841-1-git-send-email-linux@baker-net.org.uk Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2014-04-102-0/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull slave-dmaengine updates from Vinod Koul: - New driver for Qcom bam dma - New driver for RCAR peri-peri - New driver for FSL eDMA - Various odd fixes and updates thru the subsystem * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (29 commits) dmaengine: add Qualcomm BAM dma driver shdma: add R-Car Audio DMAC peri peri driver dmaengine: sirf: enable generic dt binding for dma channels dma: omap-dma: Implement device_slave_caps callback dmaengine: qcom_bam_dma: Add device tree binding dma: dw: Add suspend and resume handling for PCI mode DW_DMAC. dma: dw: allocate memory in two stages in probe Add new line to test result strings produced in verbose mode dmaengine: pch_dma: use tasklet_kill in teardown dmaengine: at_hdmac: use tasklet_kill in teardown dma: cppi41: start tear down only if channel is busy usb: musb: musb_cppi41: Dont reprogram DMA if tear down is initiated dmaengine: s3c24xx-dma: make phy->irq signed for error handling dma: imx-dma: Add missing module owner field dma: imx-dma: Replace printk with dev_* dma: fsl-edma: fix static checker warning of NULL dereference dma: Remove comment about embedding dma_slave_config into custom structs dma: mmp_tdma: move to generic device tree binding dma: mmp_pdma: add IRQF_SHARED when request irq dma: edma: Fix memory leak in edma_prep_dma_cyclic() ...
| * dmaengine: sirf: enable generic dt binding for dma channelsBarry Song2014-03-292-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | move to support of_dma_request_slave_channel() and dma_request_slave_channel. we add a xlate() to let dma clients be able to find right dma_chan by generic "dmas" properties in dts. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | Merge tag 'mmc-updates-for-3.15-rc1' of ↵Linus Torvalds2014-04-096-0/+108
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "MMC highlights for 3.15: Core: - CONFIG_MMC_UNSAFE_RESUME=y is now default behavior - DT bindings for SDHCI UHS, eMMC HS200, high-speed DDR, at 1.8/1.2V - Add GPIO descriptor based slot-gpio card detect API Drivers: - dw_mmc: Refactor SOCFPGA support as a variant inside dw_mmc-pltfm.c - mmci: Support HW busy detection on ux500 - omap: Support MMC_ERASE - omap_hsmmc: Support MMC_PM_KEEP_POWER, MMC_PM_WAKE_SDIO_IRQ, (a)cmd23 - rtsx: Support pre-req/post-req async - sdhci: Add support for Realtek RTS5250 controllers - sdhci-acpi: Add support for 80860F16, fix 80860F14/SDIO card detect - sdhci-msm: Add new driver for Qualcomm SDHCI chipset support - sdhci-pxav3: Add support for Marvell Armada 380 and 385 SoCs" * tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (102 commits) mmc: sdhci-acpi: Intel SDIO has broken card detect mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller mmc: sdhci-msm: Add platform_execute_tuning implementation mmc: sdhci-msm: Initial support for Qualcomm chipsets mmc: sdhci-msm: Qualcomm SDHCI binding documentation sdhci: only reprogram retuning timer when flag is set mmc: rename ARCH_BCM to ARCH_BCM_MOBILE mmc: sdhci: Allow for irq being shared mmc: sdhci-acpi: Add device id 80860F16 mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14 mmc: slot-gpio: Add GPIO descriptor based CD GPIO API mmc: slot-gpio: Split out CD IRQ request into a separate function mmc: slot-gpio: Record GPIO descriptors instead of GPIO numbers Revert "dts: socfpga: Add support for SD/MMC on the SOCFPGA platform" mmc: sdhci-spear: use generic card detection gpio support mmc: sdhci-spear: remove support for power gpio mmc: sdhci-spear: simplify resource handling mmc: sdhci-spear: fix platform_data usage mmc: sdhci-spear: fix error handling paths for DT mmc: sdhci-bcm-kona: fix build errors when built-in ...
| * | Revert "dts: socfpga: Add support for SD/MMC on the SOCFPGA platform"Chris Ball2014-03-174-47/+3
| | | | | | | | | | | | | | | This reverts commit d9c3f5df539a8a74cc830b35838670fe0541fed1, which should not have been merged via mmc-next. It's in arm-soc instead now.
| * | ARM: dts: add pbias dt nodeBalaji T K2014-03-045-0/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add pbias regulator node as a child of system control module - syscon. Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Stefan Roese <sr@denx.de> Signed-off-by: Chris Ball <chris@printf.net>
| * | ARM: dts: omap3-ldp: fix mmc configurationNishanth Menon2014-03-041-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MMC1 is the only MMC interface available on the platform. Further, since the platform is based on older revision of SoC which is not capable of doing multi-block reads, mark it with compatibility for the same and add pinmux to ensure that all relevant pins are configured for non-MMC boot mode. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Balaji T K <balajitk@ti.com> Signed-off-by: Chris Ball <chris@printf.net>
| * | dts: socfpga: Add support for SD/MMC on the SOCFPGA platformDinh Nguyen2014-02-264-3/+47
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce "altr,socfpga-dw-mshc" to enable Altera's SOCFPGA platform specific implementation of the dw_mmc driver. Also add the "syscon" binding to the "altr,sys-mgr" node. The clock driver can use the syscon driver to toggle the register for the SD/MMC clock phase shift settings. Finally, fix an indentation error for the sysmgr node. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Chris Ball <chris@printf.net>
* | Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2014-04-084-0/+209
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm updates from Dave Airlie: "Highlights: - drm: Generic display port aux features, primary plane support, drm master management fixes, logging cleanups, enforced locking checks (instead of docs), documentation improvements, minor number handling cleanup, pseudofs for shared inodes. - ttm: add ability to allocate from both ends - i915: broadwell features, power domain and runtime pm, per-process address space infrastructure (not enabled) - msm: power management, hdmi audio support - nouveau: ongoing GPU fault recovery, initial maxwell support, random fixes - exynos: refactored driver to clean up a lot of abstraction, DP support moved into drm, LVDS bridge support added, parallel panel support - gma500: SGX MMU support, SGX irq handling, asle irq work fixes - radeon: video engine bringup, ring handling fixes, use dp aux helpers - vmwgfx: add rendernode support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (849 commits) DRM: armada: fix corruption while loading cursors drm/dp_helper: don't return EPROTO for defers (v2) drm/bridge: export ptn3460_init function drm/exynos: remove MODULE_DEVICE_TABLE definitions ARM: dts: exynos4412-trats2: enable exynos/fimd node ARM: dts: exynos4210-trats: enable exynos/fimd node ARM: dts: exynos4412-trats2: add panel node ARM: dts: exynos4210-trats: add panel node ARM: dts: exynos4: add MIPI DSI Master node drm/panel: add S6E8AA0 driver ARM: dts: exynos4210-universal_c210: add proper panel node drm/panel: add ld9040 driver panel/ld9040: add DT bindings panel/s6e8aa0: add DT bindings drm/exynos: add DSIM driver exynos/dsim: add DT bindings drm/exynos: disallow fbdev initialization if no device is connected drm/mipi_dsi: create dsi devices only for nodes with reg property drm/mipi_dsi: add flags to DSI messages Skip intel_crt_init for Dell XPS 8700 ...
| * \ Merge tag 'drm-intel-fixes-2014-04-04' of ↵Dave Airlie2014-04-051-1/+1
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm-intel into drm-next Merge window -fixes pull request as usual. Well, I did sneak in Jani's drm_i915_private_t typedef removal, need to have fun with a big sed job too ;-) Otherwise: - hdmi interlaced fixes (Jesse&Ville) - pipe error/underrun/crc tracking fixes, regression in late 3.14-rc (but not cc: stable since only really relevant for igt runs) - large cursor wm fixes (Chris) - fix gpu turbo boost/throttle again, was getting stuck due to vlv rps patches (Chris+Imre) - fix runtime pm fallout (Paulo) - bios framebuffer inherit fix (Chris) - a few smaller things * tag 'drm-intel-fixes-2014-04-04' of git://anongit.freedesktop.org/drm-intel: (196 commits) Skip intel_crt_init for Dell XPS 8700 drm/i915: vlv: fix RPS interrupt mask setting Revert "drm/i915/vlv: fixup DDR freq detection per Punit spec" drm/i915: move power domain init earlier during system resume drm/i915: Fix the computation of required fb size for pipe drm/i915: don't get/put runtime PM at the debugfs forcewake file drm/i915: fix WARNs when reading DDI state while suspended drm/i915: don't read cursor registers on powered down pipes drm/i915: get runtime PM at i915_display_info drm/i915: don't read pp_ctrl_reg if we're suspended drm/i915: get runtime PM at i915_reg_read_ioctl drm/i915: don't schedule force_wake_timer at gen6_read drm/i915: vlv: reserve the GT power context only once during driver init drm/i915: prefer struct drm_i915_private to drm_i915_private_t drm/i915/overlay: prefer struct drm_i915_private to drm_i915_private_t drm/i915/ringbuffer: prefer struct drm_i915_private to drm_i915_private_t drm/i915/display: prefer struct drm_i915_private to drm_i915_private_t drm/i915/irq: prefer struct drm_i915_private to drm_i915_private_t drm/i915/gem: prefer struct drm_i915_private to drm_i915_private_t drm/i915/dma: prefer struct drm_i915_private to drm_i915_private_t ...
| * | | ARM: dts: exynos4412-trats2: enable exynos/fimd nodeAndrzej Hajda2014-04-041-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch changes fimd node status to OK. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
| * | | ARM: dts: exynos4210-trats: enable exynos/fimd nodeAndrzej Hajda2014-04-041-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch changes fimd node status to OK. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
| * | | ARM: dts: exynos4412-trats2: add panel nodeAndrzej Hajda2014-04-041-0/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds s6e8aa0 panel node for trats2. It adds also trats2 specific properties for DSI and regulator required by panel. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
| * | | ARM: dts: exynos4210-trats: add panel nodeAndrzej Hajda2014-04-041-0/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds s6e8aa0 panel node for trats. It adds also trats specific properties for DSI. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
| * | | ARM: dts: exynos4: add MIPI DSI Master nodeAndrzej Hajda2014-04-041-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a common part of DSI node for all Exynos4 boards. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
| * | | ARM: dts: exynos4210-universal_c210: add proper panel nodeAndrzej Hajda2014-04-041-17/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch replaces panel bindings for panel initialized by boot loader with bindings to proper ld9040 panel. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
| * | | ARM: dts: exynos4210-universal: add exynos/fimd nodeAndrzej Hajda2014-03-241-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds fimd node with display timings for exynos4210-universal device. It also makes LCD regulators always on. This allow to re-use panel initialized by boot loader. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
* | | | Merge tag 'fbdev-omap-3.15' of ↵Linus Torvalds2014-04-0714-26/+820
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull OMAP fbdev changes from Tomi Valkeinen: "This is based on the already pulled fbdev-main changes, and this also merges .dts branch from Tony Lindgren (which has also been pulled), so that I was able to add the display related .dts changes. This contains OMAP related fbdev changes for 3.15. The bulk of the patches are for adding Device Tree support for OMAP Display Subsystem: - SoCs: OMAP2/3/4 - Boards: OMAP4 Panda, OMAP4 SDP, OMAP3 Beagle, OMAP3 Beagle-xM, OMAP3 IGEP0020, OMAP3 N900 - Devices: TFP410 Encoder, tpd12s015 HDMI companion chip, Sony acx565akm panel, MIPI DSI Command mode panel and HDMI, DVI and Analog TV connectors" * tag 'fbdev-omap-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (45 commits) OMAPDSS: HDMI: fix interlace output OMAPDSS: add missing __init for dss_init_ports ARM: OMAP2+: remove pdata quirks for displays OMAPDSS: remove DT hacks for regulators Doc/DT: Add DT binding documentation for tpd12s015 encoder Doc/DT: Add DT binding documentation for TFP410 encoder Doc/DT: Add DT binding documentation for Sony acx565akm panel Doc/DT: Add DT binding documentation for MIPI DSI CM Panel Doc/DT: Add DT binding documentation for HDMI Connector Doc/DT: Add DT binding documentation for DVI Connector Doc/DT: Add DT binding documentation for Analog TV Connector ARM: omap3-n900.dts: add display information ARM: omap3-igep0020.dts: add display information ARM: omap3-beagle-xm.dts: add display information ARM: omap3-beagle.dts: add display information ARM: omap4-sdp.dts: add display information Doc/DT: Add DT binding documentation for OMAP DSS OMAPDSS: acx565akm: Add DT support OMAPDSS: connector-analog-tv: Add DT support OMAPDSS: hdmi-connector: Add DT support ...
| * \ \ \ Merge branch '3.15/dss-dt-dts' into 3.15/fbdevTomi Valkeinen2014-03-2050-202/+3552
| |\ \ \ \ | | | | | | | | | | | | | | | | | | OMAP DSS related .dts changes
| | * | | | ARM: omap3-n900.dts: add display informationTomi Valkeinen2014-03-191-4/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add DT data for OMAP3 N900 board. The board has the following displays: lcd: LCD panel connected to OMAP's SDI output tv: analog svideo Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Sebastian Reichel <sre@debian.org> Acked-by: Tony Lindgren <tony@atomide.com>
| | * | | | ARM: omap3-igep0020.dts: add display informationJavier Martinez Canillas2014-03-191-3/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add DT data for OMAP3 IGEPv2 board. The board has the following displays: dvi: uses TFP410 encoder to convert DPI to DVI Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
| | * | | | ARM: omap3-beagle-xm.dts: add display informationTomi Valkeinen2014-03-191-9/+129
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add DT data for OMAP3 Beagle-xM board. The board has the following displays: dvi: uses TFP410 encoder to convert DPI to DVI tv: analog svideo Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
| | * | | | ARM: omap3-beagle.dts: add display informationTomi Valkeinen2014-03-191-0/+135
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add DT data for OMAP3 Beagle board. The board has the following displays: dvi: uses TFP410 encoder to convert DPI to DVI tv: analog svideo Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
| | * | | | ARM: omap4-sdp.dts: add display informationTomi Valkeinen2014-03-191-0/+113
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add DT data for OMAP4 SDP board. The board has the following displays: lcd0: a command mode DSI panel connected to OMAP DSI1 encoder lcd1: a command mode DSI panel connected to OMAP DSI2 encoder hdmi: OMAP HDMI output with TPD12S015 ESD/level shifter Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
| | * | | | ARM: omap4-panda.dts: add display informationTomi Valkeinen2014-03-191-0/+115
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add DT data for OMAP4 Pandaboard. The board has the following displays: dvi: uses TFP410 encoder to convert DPI to DVI hdmi: OMAP HDMI output with TPD12S015 ESD/level shifter Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
| | * | | | ARM: omap4.dtsi: add omapdss informationTomi Valkeinen2014-03-191-0/+79
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add DT data for OMAP4 display subsystem, which contains the following blocks: dss - the wrapper/glue for the display modules dispc - display controller dsi - MIPI DSI encoder (two independent modules) rfbi - MIPI DBI encoder venc - analog TV encoder hdmi - HDMI encoder Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
| | * | | | ARM: omap3.dtsi: add omapdss informationTomi Valkeinen2014-03-192-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add DT data for OMAP3 display subsystem, which contains the following blocks: dss - the wrapper/glue for the display modules dispc - display controller dsi - MIPI DSI encoder rfbi - MIPI DBI encoder venc - analog TV encoder Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
| | * | | | ARM: omap2.dtsi: add omapdss informationTomi Valkeinen2014-03-191-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add DT data for OMAP2 display subsystem, which contains the following blocks: dss - the wrapper/glue for the display modules dispc - display controller rfbi - MIPI DBI encoder venc - analog TV encoder Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
| | * | | | ARM: dts: set 'ti,set-rate-parent' for dpll4_m4 pathTomi Valkeinen2014-03-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set 'ti,set-rate-parent' property for clocks in the dpll4_m4 clock path, which is used for DSS functional clock. This fixes DSS driver's clock rate configuration, which needs the rate to be propagated properly to the divider node (dpll4_m4_ck). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Christoph Fritz <chf.fritz@googlemail.com> Tested-by: Marek Belisko <marek@goldelico.com> Acked-by: Tony Lindgren <tony@atomide.com>
| | * | | | ARM: dts: use ti,fixed-factor-clock for dpll4_m4x2_mul_ckTomi Valkeinen2014-03-192-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to use set-rate-parent for dpll4_m4 clock path, so use the ti,fixed-factor-clock version which supports set-rate-parent property. The set-rate-parent flag itself is set in the following patch, this one just changes the clock driver to ti,fixed-factor-clock without any other changes. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Christoph Fritz <chf.fritz@googlemail.com> Tested-by: Marek Belisko <marek@goldelico.com> Acked-by: Tony Lindgren <tony@atomide.com>
| | * | | | ARM: dts: fix DPLL4 x2 clkouts on 3630Tomi Valkeinen2014-03-192-1/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OMAP3630 DPLL4 is different than on OMAP3430, in that it doesn't have the x2 multiplier for its outputs. This is not currently reflected in the clock DT data. Fix the issue by setting the clock multiplier to 1 (instead of 2) for the DPLL4 output clocks. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Christoph Fritz <chf.fritz@googlemail.com> Tested-by: Marek Belisko <marek@goldelico.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
| | * | | | ARM: dts: fix omap3 dss clock handle namesTomi Valkeinen2014-03-192-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DSS fclk and iclk handles are named differently on OMAP3430 ES1 than on later OMAP revisions. The ES1 has handles 'dss1_alwon_fck_3430es1' and 'dss_ick_3430es1', whereas later revisions have similar names but ending with 'es2'. This means we don't have one clock handle to which we could refer to when defining the DSS clocks. However, as the namespaces are separate for ES1 and ES2+ OMAPs, we can just rename the handles to 'dss1_alwon_fck' and 'dss_ick' for both ES1 and ES2+, removing the issue. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Christoph Fritz <chf.fritz@googlemail.com> Tested-by: Marek Belisko <marek@goldelico.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
* | | | | | Merge tag 'mfd-for-linus-3.15' of ↵Linus Torvalds2014-04-072-0/+12
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - Use of managed resources - omap, twl4030, ti_am335x_tscadc - Advanced error handling - omap - Rework clk management - omap - Device Tree (re-)work - tc3589x, pm8921, da9055, sec - IRC management overhaul and !BROKEN - pm8921 - Convert to regmap - ssbi, pm8921 - Use simple power-management ops - ucb1x00 - Include file clean-up - adp5520, cs5535, janz, lpc_ich, - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583, rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc, tps65912, vexpress-config, wm8350, ywm8350 - Various bug fixes across the subsystem - NULL/invalid pointer dereference prevention - Resource leak mitigation, - Variable used initialised - Staticise various containers - Enforce return value checks New drivers/supported devices: - Add support for s2mps14 and s2mpa01 to sec - Add support for da9063 (v5) to da9063 - Add support for atom-c2000 to gpio-ich - Add support for come-{mbt10,cbt6,chl6} to kempld - Add support for da9053 to da9052 - Add support for itco-wdt (v3) and baytrail to lpc_ich - Add new drivers for tps65218, rtsx_usb, bcm590xx (Re-)moved drivers: - twl4030 ==> drivers/iio - ti-ssp ==> /dev/null" * tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits) mfd: wm5110: Correct default for HEADPHONE_DETECT_1 mfd: arizona: Correct small errors in the DT binding documentation mfd: arizona: Mark DSP clocking register as volatile mfd: devicetree: bindings: Add pm8xxx RTC description mfd: kempld-core: Fix potential hang-up during boot mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01 mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail mfd: sec-core: Fix I2C dummy device resource leak on probe failure mfd: sec-core: Add of_compatible strings for clock MFD cells mfd: Remove obsolete ti-ssp driver Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks mfd: bcm590xx: Fix type argument for module device table mfd: lpc_ich: Add support for Intel Bay Trail SoC mfd: lpc_ich: Add support for NM10 GPIO mfd: lpc_ich: Change Avoton to iTCO v3 watchdog: iTCO_wdt: Add support for v3 silicon mfd: lpc_ich: Add support for iTCO v3 mfd: lpc_ich: Remove lpc_ich_cfg struct use mfd: lpc_ich: Only configure watchdog or GPIO when present ...
| * | | | | | mfd: omap-usb-host: Use clock names as per function for reference clocksRoger Quadros2014-03-132-0/+12
| |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use a meaningful name for the reference clocks so that it indicates the function. Update the OMAP4+ USB Host node as well to be in sync with the changes. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* | | | | | Merge tag 'clk-for-linus-3.15' of ↵Linus Torvalds2014-04-051-0/+1
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.linaro.org/people/mike.turquette/linux Pull clock framework changes from Mike Turquette: "The clock framework changes for 3.15 look similar to past pull requests. Mostly clock driver updates, more Device Tree support in the form of common functions useful across platforms and a handful of features and fixes to the framework core" * tag 'clk-for-linus-3.15' of git://git.linaro.org/people/mike.turquette/linux: (86 commits) clk: shmobile: fix setting paretn clock rate clk: shmobile: rcar-gen2: fix lb/sd0/sd1/sdh clock parent to pll1 clk: Fix minor errors in of_clk_init() function comments clk: reverse default clk provider initialization order in of_clk_init() clk: sirf: update copyright years to 2014 clk: mmp: try to use closer one when do round rate clk: mmp: fix the wrong calculation formula clk: mmp: fix wrong mask when calculate denominator clk: st: Adds quadfs clock binding clk: st: Adds clockgen-vcc and clockgen-mux clock binding clk: st: Adds clockgen clock binding clk: st: Adds divmux and prediv clock binding clk: st: Support for A9 MUX clocks clk: st: Support for ClockGenA9/DDR/GPU clk: st: Support for QUADFS inside ClockGenB/C/D/E/F clk: st: Support for VCC-mux and MUX clocks clk: st: Support for PLLs inside ClockGenA(s) clk: st: Support for DIVMUX and PreDiv Clocks clk: support hardware-specific debugfs entries clk: s2mps11: Use of_get_child_by_name ...
| * \ \ \ \ \ Merge branch 'clk-fixes' into clk-nextMike Turquette2014-02-2423-143/+88
| |\ \ \ \ \ \
| * | | | | | | clk: socfpga: Add a clk-phase property to the "altr,socfpga-gate-clk"Dinh Nguyen2014-02-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The clk-phase property is used to represent the 2 clock phase values that is needed for the SD/MMC driver. Add a prepare function to the clk_ops, that will use the syscon driver to set sdmmc_clk's phase shift that is located in the system manager. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> --- v9: none v8: Use degrees in the clk-phase binding property v7: Add dts property to represent the clk phase of the sdmmc_clk. Add a prepare function to the gate clk that will toggle clock phase setting. Remove the "altr,socfpga-sdmmc-sdr-clk" clock type. v6: Add a new clock type "altr,socfpga-sdmmc-sdr-clk" that will be used to set the phase shift settings. v5: Use the "snps,dw-mshc" binding v4: Use the sdmmc_clk prepare function to set the phase shift settings v3: Not use the syscon driver because as of 3.13-rc1, the syscon driver is loaded after the clock driver. v2: Use the syscon driver
OpenPOWER on IntegriCloud