summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx23-olinuxino.dts
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: imx23-olinuxino: Fix dr_mode of usb0Stefan Wahren2015-04-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | The dr_mode of usb0 on imx233-olinuxino is left to default "otg". Since the green LED (GPIO2_1) on imx233-olinuxino is connected to the same pin as USB_OTG_ID it's possible to disable USB host by LED toggling: echo 0 > /sys/class/leds/green/brightness [ 1068.890000] ci_hdrc ci_hdrc.0: remove, state 1 [ 1068.890000] usb usb1: USB disconnect, device number 1 [ 1068.920000] usb 1-1: USB disconnect, device number 2 [ 1068.920000] usb 1-1.1: USB disconnect, device number 3 [ 1069.070000] usb 1-1.2: USB disconnect, device number 4 [ 1069.450000] ci_hdrc ci_hdrc.0: USB bus 1 deregistered [ 1074.460000] ci_hdrc ci_hdrc.0: timeout waiting for 00000800 in 11 This patch fixes the issue by setting dr_mode to "host" in the dts file. Reported-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Peter Chen <peter.chen@freescale.com> Fixes: b49312948285 ("ARM: dts: imx23-olinuxino: Add USB host support") Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx23-olinuxino: Fix polarity of LED GPIOFabio Estevam2015-04-271-1/+2
| | | | | | | | | | | | | | On imx23-olinuxino the LED turns on when level logic high is aplied to GPIO2_1. Fix the gpios property accordingly. Fixes: b34aa1850244 ("ARM: dts: imx23-olinuxino: Remove unneeded "default-on"") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx: use generic node name for fixed regulatorShawn Guo2014-02-091-1/+4
| | | | | | | | The device tree specification recommends that generic name should be used for nodes. So instead of naming those fixed regulator nodes arbitrarily, let's use the generic name 'regulator@num' for those nodes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig definesLothar Waßmann2013-09-261-6/+6
| | | | | | | | Convert mx23/mx28 dts files to use the padconfig defintions from mxs-pinfunc.h. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headersLothar Waßmann2013-09-261-3/+3
| | | | | | | | | | | | | | | | | | Convert mx23/mx28 dts filed to use the pinctrl header files. NOTE: During automatic conversion of these files to use the pinconfig definitions an inconsistency has been found in: arch/arm/boot/dts/imx28-apx4devkit.dts According to the comment the function for pad SSP2_SS0 should have been MX28_PAD_SSP2_SS0__GPIO_2_19, while the given value 0x2131 represents: MX28_PAD_SSP2_SS0__AUART3_TX I used the later (though probably wrong) definition because that's what is actually being used in the DTB. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx23-olinuxino: enable Low Resolution ADCOtavio Salvador2013-08-161-0/+4
| | | | | | | | The i.MX23 has a internal Low Resolution ADC; this enables the support for this device. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx23-olinuxino: mark sdcard cd as brokenAlexandre Pereira da Silva2013-04-071-0/+1
| | | | | | | The imx23-olinuxino sdcard doesn't have card detect. Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx23-olinuxino: Fix IOMUX settingsFabio Estevam2012-12-251-4/+4
| | | | | | | | | | On the imx23-olinuxino board GPIO2_1 is connected to the LED and GPIO0_17 is the USB PHY reset. So make the IOMUX assignment properly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx23-olinuxino: Add spi supportFadil Berisha2012-11-201-0/+9
| | | | | | | | | imx23-olinuxino board has spi pins exposed on external connector. This patch add spi support. Signed-off-by: Fadil Berisha <f.koliqi@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx23-olinuxino: Use pinctrl for gpio-ledFabio Estevam2012-10-151-0/+11
| | | | | | | | | | | Since commit 8fe4554f (leds: leds-gpio: adopt pinctrl support) gpio-led driver has pinctrl support, so setup the gpio led pin via pinctrl and avoid the following warning: leds-gpio leds.5: pins are not configured from the driver Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx23-olinuxino: Remove unneeded "default-on"Fabio Estevam2012-10-151-2/+1
| | | | | | | | | The initial state of the gpio led can be set directly in "gpios" node. Hence, linux,default-trigger can be removed. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx23-olinuxino: Add USB host supportFabio Estevam2012-09-191-0/+26
| | | | | | | Add USB host support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: olinuxino: Add gpio-led supportFabio Estevam2012-08-231-0/+25
| | | | | | | | | Olinuxino has a LED connected to MX23_PAD_SSP1_DETECT__GPIO_2_1 pin. Add support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx23-olinuxino.dts: Add AUART0 supportFabio Estevam2012-08-171-0/+6
| | | | | | | Add AUART0 support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: mx23: Add initial support for olinuxino boardFabio Estevam2012-07-051-0/+44
mx23-olinuxino is a low cost board designed by Olimex. It has the following features: - Freescale iMX233 ARM926J processor at 454MHz -64 MB RAM -SD-card connector -TV PAL/NTSC video output -2 USB High Speed Hosts -Ethernet 100 Mbit -Stereo Audio Input -Stereo Headphones Audio Output More information at: http://www.olimex.com/dev/imx233-olinuxino-maxi.html Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
OpenPOWER on IntegriCloud