summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/at91sam9x5.dtsi
Commit message (Collapse)AuthorAgeFilesLines
* ARM: at91/dt: sam9x5: add pinctrl for pwm0Gaël PORTAY2015-05-111-0/+46
| | | | | | | | | Defines the pinctrl configurations for PWM0. Signed-off-by: Gaël PORTAY <g.portay@overkiz.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* ARM: at91/dt: introduce atmel,<chip>-dbguAlexandre Belloni2015-03-131-1/+1
| | | | | | | | The DBGU is not a simple UART and we need to be able to distinguish it from the other UARTs, in particular to get its address and check the chip id. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* ARM: at91/dt: fix USB high-speed clock to select UTMINicolas Ferre2015-03-111-2/+2
| | | | | | | | | | The UTMI clock must be selected by any high-speed USB IP. The logic behind it needs this particular clock. So, correct the clock in the device tree files affected. Reported-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: <stable@vger.kernel.org> #3.18
* ARM: at91/dt: keep watchdog running in idle modeMichel Marti2015-03-041-1/+0
| | | | | | | | | | | | | Since turning on idle-halt in commit fe46aa679f12 (ARM: at91/dt: add sam9 watchdog default options to SoCs), SoCs compatible with at91sam9260-wdt no longer reboot if the watchdog times out while the CPU is in idle state. Removing the 'idle-halt' flag that was set by default fixes this. Signed-off-by: Michel Marti <mma@objectxp.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Sylvain Rochet <sylvain.rochet@finsecur.com> [nicolas.ferre@atmel.com: rework the commit message] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* ARM: at91/dt: add SRAM nodesAlexandre Belloni2015-01-151-0/+5
| | | | | | | | | | | | | Add nodes for the SRAM available on atmel SoCs For the at91sam9260 and the at91sam9g20, address mirroring is used to create a single contiguous SRAM range instead of declaring two separate banks. Also remove leftover TODOs in the sam9g45 file Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> [nicolas.ferre@atmel.com: correct at91sam9rl sram size => 0x10000] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* ARM: at91: at91sam9x5 dt: add usart dma definitions to dtJiri Prchal2014-11-031-0/+12
| | | | | | | | | This patch adds usart dma definitions to both dtsi for sam9x5 chips. Without usage of dma it's unable to catch all bytes on usart receiver. Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* ARM: at91/dt: sam9x5: fix ADC compatible stringAlexandre Belloni2014-09-011-1/+1
| | | | | | | Use the correct compatible string for the ADC of the at91sam9x5 family of SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* Merge tag 'at91-dt-for-3.17' of ↵Nicolas Ferre2014-08-191-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux Pull AT91 ramc and reset/poweroff related DT patches from Maxim Ripard: "This branch gathers a few devicetree patches needed for the reworks found in the later patches to be sent. More precisely, it holds: - The addition of ddrck for the sama5d3 and the sam9 SoCs - The addition of the shutdown controller node in the sama5d3 DTSI - The slight rework of the ramc bindings for the SoCs that have several RAM controllers" Conflicts: arch/arm/boot/dts/at91sam9g45.dtsi
| * ARM: at91/dt: at91sam9: use ddrck in ramcAlexandre Belloni2014-07-151-0/+2
| | | | | | | | | | | | | | | | | | Make the ram controller driver take the ddrck clock for at91sam9n12 and at91sam9x5. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* | Merge tag 'v3.16-rc6' into next/dtArnd Bergmann2014-07-281-2/+2
|\ \ | | | | | | | | | | | | | | | Update to Linux 3.16-rc6 as a dependency for the broadcom changes. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * \ Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson2014-07-181-2/+2
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge "at91: fixes for 3.16 #2" from Nicolas Ferre: Second AT91 fixes series for 3.16 - fix clock definitions after the move to CCF for: * at91sam9n12 (ohci) * at91sam9x5 (ohci, pwm) * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsi ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsi ARM: at91: at91sam9x5: correct typo error for ohci clock Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsiBoris BREZILLON2014-07-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pwm driver requires a clocks property referencing the pwm peripheral clk. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
| | * | ARM: at91: at91sam9x5: correct typo error for ohci clockBo Shen2014-07-181-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct the typo error for the second "uhphs_clk". Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* | | | Merge tag 'zynq-dt-for-3.17' of git://git.xilinx.com/linux-xlnx into next/dtOlof Johansson2014-07-191-0/+2
|\ \ \ \ | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge "Xilinx Zynq changes for v3.17" from Michal Simek: arm: Xilinx Zynq dt patches for v3.17 - Document and use new cadence serial binding * tag 'zynq-dt-for-3.17' of git://git.xilinx.com/linux-xlnx: ARM: zynq: DT: Migrate UART to Cadence binding tty: cadence: Document DT binding + Linux 3.16-rc5 Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: at91: at91sam9x5: add clocks for usb deviceBo Shen2014-07-121-0/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add clocks for usb device, or else switch to CCF, the gadget won't work. Reported-by: Jiri Prchal <jiri.prchal@aksignal.cz> Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Jiri Prchal <jiri.prchal@aksignal.cz> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* | | ARM: at91/dt: sam9x5 crystals under the clocks nodeAlexandre Belloni2014-07-091-14/+16
|/ / | | | | | | | | | | | | | | | | | | Having clocks grouped in a subnode is common practice, so move the crystals and the ADC clock under a clocks node for the at91sam9x5 SoC and at91sam9x5 based boards. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* | ARM: at91/dt: sam9x5: correct PLLA ICPLL and OUT valuesAlexandre Belloni2014-06-251-2/+2
|/ | | | | | | | | ICPLL can only take 0 or 1, it got mixed with OUT which can be in the [0-3] range. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* ARM: at91/dt: define sam9x5 clocksBoris BREZILLON2014-05-221-1/+354
| | | | | | | | | Define sam9x5 clocks in sam9x5 dt files and make use of them in peripheral definitions. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* ARM: at91/dt: at91sam9x5: remove useless adc propertiesAlexandre Belloni2014-03-121-6/+7
| | | | | | | | | | | Remove the properties that are not used anymore by the at91_adc driver and fix the atmel,adc-use-external-triggers property name. Also, add #address-cells, #size-cells and a reg for each trigger to comply to the ePAPR. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* ARM: at91/DT: add NAND + DMA propertyNicolas Ferre2014-03-101-0/+1
| | | | | | | | | | Add the "atmel,nand-has-dma" property to NAND node for SoC that can use the DMA to perform NAND accesses. Use of this property was added in 1b7192658a08f70df0f290634fd7cd2ecb629fc9 (mtd: atmel_nand: add a new dt binding item for nand dma support). Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <b.brezillon@overkiz.com>
* ARM: at91/dt: add sam9 watchdog default options to SoCsBoris BREZILLON2014-01-281-0/+5
| | | | | | | | Set default watchdog options in every SoC compatible with the sam9 watchdog. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* ARM: at91: add PWM device nodeBo Shen2013-12-191-0/+9
| | | | | | | Add PWM device node for AT91 series SoC. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* Merge tag 'omap-for-v3.13/cm-scm-cleanup-signed' of ↵Olof Johansson2013-10-281-2/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Paul Walmsley <paul@pwsan.com> via Tony Lindgren: Move some of the OMAP2+ CM and System Control Module direct register accesses into CM- and System Control Module-specific "drivers" underneath arch/arm/mach-omap2/. This is a prerequisite for moving this code out of arch/arm/mach-omap2/ into drivers/. Basic test logs are available here: http://www.pwsan.com/omap/testlogs/cm_scm_cleanup_a_v3.13/20131019101809/ * tag 'omap-for-v3.13/cm-scm-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP3: control: add API for setting IVA bootmode ARM: OMAP3: CM/control: move CM scratchpad save to CM driver ARM: OMAP3: McBSP: do not access CM register directly ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock ARM: OMAP2: CM/PM: remove direct register accesses outside CM code + Linux 3.12-rc4 Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: at91: at91sam9x5: set default mmc[01] pinctrl-namesNicolas Ferre2013-09-191-0/+2
| | | | | | | | | | Reported-by: Jiri Prchal <jiri.prchal@aksignal.cz> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
| * ARM: at91: serial: fix wrong pinctrl_usart2_rtsJiri Prchal2013-09-191-2/+2
| | | | | | | | | | | | | | Replace pinctrl_usart2_rts and pinctrl_usart2_cts istead of pinctrl_uart2_*. Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* | ARM: at91/dt: split sam9x5 peripheral definitionsBoris BREZILLON2013-10-161-67/+0
|/ | | | | | | | | | | | | | This patch splits the sam9x5 peripheral definitions into: - a common base for all sam9x5 SoCs (at91sam9x5.dtsi) - several optional peripheral definitions which will be included by specific sam9x5 SoCs (at91sam9x5_'periph name'.dtsi) This provides a better representation of the real hardware (drop unneeded dt nodes) and avoids future peripheral id conflict (lcdc and isi both use peripheral id 25). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* ARM: at91/dt: sam9x5: add SSC DMA parametersRichard Genoud2013-08-211-0/+3
| | | | | Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dtOlof Johansson2013-06-141-8/+77
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From Nicolas Ferre: Again some nice DT updates for AT91: - DMA binding update with one patch shared with slave-dma tree - more SPI DT activation - enable the USB gadget HS for DT platforms * tag 'at91-dt' of git://github.com/at91linux/linux-at91: ARM: at91: sam9m10g45ek add udc DT support ARM: at91: sam9g45 add udc DT support ARM: at91: sam9x5ek add udc DT support ARM: at91: sam9x5 add udc DT support ARM: at91: dt: at91sam9x5: add SPI DMA client infos ARM: at91: dt: switch DMA DT bindings to pre-processor ARM: at91: dt: add header to define at_hdmac configuration
| * ARM: at91: sam9x5 add udc DT supportJean-Christophe PLAGNIOL-VILLARD2013-06-151-0/+62
| | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Bo Shen <voice.shen@atmel.com>
| * ARM: at91: dt: at91sam9x5: add SPI DMA client infosRichard Genoud2013-06-151-0/+6
| | | | | | | | | | Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
| * ARM: at91: dt: switch DMA DT bindings to pre-processorLudovic Desroches2013-06-151-8/+9
| | | | | | | | | | | | Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* | Merge branch 'dts-cpus-updates' of git://linux-arm.org/linux-2.6-lp into next/dtOlof Johansson2013-06-071-2/+6
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From Lorenzo Pieralisi, this is a series of patches that cleans up the CPU nodes in most of the SoC dtsi files to conform to the standard bindings. * 'dts-cpus-updates' of git://linux-arm.org/linux-2.6-lp: ARM: dts: sunxi: cpus/cpu nodes dts updates ARM: dts: spear: cpus/cpu nodes dts updates ARM: dts: sh7372: cpus/cpu nodes dts updates ARM: dts: r8a7740: cpus/cpu nodes dts updates ARM: dts: pxa2xx: cpus/cpu nodes dts updates ARM: dts: prima2: cpus/cpu node dts updates ARM: dts: picoxcell: cpus/cpu nodes dts updates ARM: dts: omap: cpus/cpu nodes dts updates ARM: dts: lpc32xx: cpus/cpu nodes dts updates ARM: dts: imx: cpus/cpu nodes dts updates ARM: dts: exynos5440: cpus/cpu nodes dts updates ARM: dts: at91: cpus/cpu node dts updates ARM: dts: armada-370-xp: cpus/cpu node dts updates ARM: dts: am33xx: cpus/cpu nodes dts updates Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: dts: at91: cpus/cpu node dts updatesLorenzo Pieralisi2013-05-231-2/+6
| | | | | | | | | | | | | | | | This patch updates the in-kernel dts files according to the latest cpus and cpu bindings updates for ARM. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* | ARM: at91/dt: add pinctrl definition for at91 tc blocksBoris BREZILLON2013-05-311-0/+76
| | | | | | | | | | | | | | | | | | | | This patch adds pinctrl configurations for at91 Timer Counter blocks. These pin definitions can be referenced by "atmel,tcb-pwm" devices to setup pins as PWM output for instance. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> [nicolas.ferre@atmel.com: switch to pinctrl pre-processor macros] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* | ARM: at91/dtsi: add the watchdog nodes for at91 SoCWenyou Yang2013-05-311-0/+6
| | | | | | | | | | | | | | | | at91sam9x5, at91sam9n12 Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* | ARM: at91/at91sam9x5.dtsi: add UART0/1 nodesNicolas Ferre2013-05-311-0/+18
| | | | | | | | | | Reported-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* | ARM: at91: at91sam9x5 RTC is not compatible with at91rm9200 oneNicolas Ferre2013-05-311-1/+1
| | | | | | | | | | | | | | | | Due to a bug with RTC IMR, we cannot consider at91sam9x5 RTC compatible with the previous one. Modify DT compatibility string, even if the driver is not yet modified to take it into account. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* | ARM: at91: dt: switch to standard IRQ flag definesJean-Christophe PLAGNIOL-VILLARD2013-05-171-27/+28
| | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* | ARM: at91: dt: switch to pinctrl to pre-processorJean-Christophe PLAGNIOL-VILLARD2013-05-171-102/+103
| | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* | ARM: at91: dt: switch to standard GPIO flag defines.Jean-Christophe PLAGNIOL-VILLARD2013-05-171-8/+9
| | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* | ARM: at91: dt: use #include for all device treesJean-Christophe PLAGNIOL-VILLARD2013-05-171-1/+1
|/ | | | | | | to prepare the switch to the macro. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* Merge tag 'cleanup-for-linus-2' of ↵Linus Torvalds2013-05-071-0/+15
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late cleanups from Arnd Bergmann: "These are cleanups and smaller changes that either depend on earlier feature branches or came in late during the development cycle. We normally try to get all cleanups early, so these are the exceptions: - A follow-up on the clocksource reworks, hopefully the last time we need to merge clocksource subsystem changes through arm-soc. A first set of patches was part of the original 3.10 arm-soc cleanup series because of interdependencies with timer drivers now moved out of arch/arm. - Migrating the SPEAr13xx platform away from using auxdata for DMA channel descriptions towards using information in device tree, based on the earlier SPEAr multiplatform series - A few follow-ups on the Atmel SAMA5 support and other changes for Atmel at91 based on the larger at91 reworks. - Moving the armada irqchip implementation to drivers/irqchip - Several OMAP cleanups following up on the larger series already merged in 3.10." * tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: OMAP4: change the device names in usb_bind_phy ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686a ARM: SPEAr: conditionalize SMP code ARM: arch_timer: Silence debug preempt warnings ARM: OMAP: remove unused variable serial: amba-pl011: fix !CONFIG_DMA_ENGINE case ata: arasan: remove the need for platform_data ARM: at91/sama5d34ek.dts: remove not needed compatibility string ARM: at91: dts: add MCI DMA support ARM: at91: dts: add i2c dma support ARM: at91: dts: set #dma-cells to the correct value ARM: at91: suspend both memory controllers on at91sam9263 irqchip: armada-370-xp: slightly cleanup irq controller driver irqchip: armada-370-xp: move IRQ handler to avoid forward declaration irqchip: move IRQ driver for Armada 370/XP ARM: mvebu: move L2 cache initialization in init_early() devtree: add binding documentation for sp804 ARM: integrator-cp: convert use CLKSRC_OF for timer init ARM: versatile: use OF init for sp804 timer ARM: versatile: add versatile dtbs to dtbs target ...
| * Merge tag 'at91-soc' of git://github.com/at91linux/linux-at91 into late/cleanupArnd Bergmann2013-04-291-0/+15
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From Nicolas Ferre <nicolas.ferre@atmel.com>: DT modifications for generic slave DMA binding. Addition of MCI and I2C DMA bindings. A little DT machine compatibility removal for SAMA5. * tag 'at91-soc' of git://github.com/at91linux/linux-at91: ARM: at91/sama5d34ek.dts: remove not needed compatibility string ARM: at91: dts: add MCI DMA support ARM: at91: dts: add i2c dma support ARM: at91: dts: set #dma-cells to the correct value Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * ARM: at91: dts: add MCI DMA supportLudovic Desroches2013-04-191-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | Add DMA resources to MCI nodes. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> [nicolas.ferre@atmel.com: correct 9g45, 9n12 dma phandle name] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
| | * ARM: at91: dts: add i2c dma supportLudovic Desroches2013-04-191-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | Add DMA resources to i2c nodes. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> [nicolas.ferre@atmel.com: correct 9n12 dma phandle name] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
| | * ARM: at91: dts: set #dma-cells to the correct valueLudovic Desroches2013-04-181-0/+2
| | | | | | | | | | | | | | | | | | | | | Moving to generic DMA DT binding involves to set #dma-cells to 2. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* | | Merge tag 'dt-for-linus' of ↵Linus Torvalds2013-05-021-0/+70
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device-tree updates from Olof Johansson: "Part 1 of device-tree updates for 3.10. The bulk of the churn in this branch is due to i.MX moving from C-defined pin control over to device tree, which is a one-time conversion that will allow greater flexibility down the road. Besides that, there's PCI-e bindings for Marvell mvebu platforms and a handful of cleanups to tegra due to the new include file functionality of the device tree compiler" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (113 commits) arm: mvebu: PCIe Device Tree informations for Armada XP GP arm: mvebu: PCIe Device Tree informations for Armada 370 DB arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox arm: mvebu: PCIe Device Tree informations for Armada XP DB arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4 arm: mvebu: add PCIe Device Tree informations for Armada XP arm: mvebu: add PCIe Device Tree informations for Armada 370 ARM: sunxi: unify osc24M_fixed and osc24M arm: vt8500: Add SDHC support to WM8505 DT ARM: dts: Add a 64 bits version of the skeleton device tree ARM: mvebu: Add Device Bus and CFI flash memory support to defconfig ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board ARM: mvebu: Add support for NOR flash device on Armada XP-GP board ARM: mvebu: Add Device Bus support for Armada 370/XP SoC ARM: dts: imx6dl-wandboard: Add USB Host support ARM: dts: imx51 cpu node ARM: dts: Add missing imx27-phytec-phycore dtb target ARM: dts: Add NFC support for i.MX27 Phytec PCM038 module ARM: i.MX51: Add PATA support ARM: dts: Add initial support for Wandboard Dual-Lite ...
| * \ \ Merge tag 'imx-dt-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson2013-04-181-2/+26
| |\ \ \ | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into next/dt From Shawn Guo: The imx device tree changes for 3.10: * The huge diff stat is introduced by the pinctrl changes. With DTC macro support ready, we're moving those huge mount of data about pins out of pinctrl driver. * Device tree source updates for GPI, LDB, SRC, cpufreq-cpu0. * Initial imx6dl device tree support * Board level DTS changes for some imx27 and imx51 platforms. * tag 'imx-dt-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6: (605 commits) ARM: dts: imx6dl-wandboard: Add USB Host support ARM: dts: imx51 cpu node ARM: dts: Add missing imx27-phytec-phycore dtb target ARM: dts: Add NFC support for i.MX27 Phytec PCM038 module ARM: i.MX51: Add PATA support ARM: dts: Add initial support for Wandboard Dual-Lite ARM: dts: imx: add initial imx6dl-sabreauto support ARM: dts: imx: add initial imx6dl-sabresd support ARM: dts: imx: make sabreauto and sabresd common pinctrl: add pinctrl driver for imx6sl pinctrl: add pinctrl driver for imx6dl ARM: dts: imx53: fix SD2_DATA1 pad AUDMUX_AUD4 configuration ARM: dts: MicroSys sbc6x support (i.MX6) ARM i.MX5: Add System Reset Controller (SRC) support for i.MX51 and i.MX53 ARM i.MX5: Add system reset controller (SRC) to i.MX51 and i.MX53 device tree ARM i.MX6q: Link system reset controller (SRC) to IPU in DT ARM i.MX6q: Add LDB device to device tree ARM: imx5 DT init cpufreq-cpu0 device ARM: imx27 DT init cpufreq-cpu0 device ARM i.MX53: Add LDB device to device tree ... Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: at91: dts: add adc resolution stuffLudovic Desroches2013-04-041-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the ADC low and high resolution configuration and which one to use. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
| * | | ARM: at91/at91sam9x5: add RTC nodeNicolas Ferre2013-03-221-0/+7
| | | | | | | | | | | | | | | | Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
OpenPOWER on IntegriCloud