summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/am43x-epos-evm.dts
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: AM43x-EPOS-EVM: Fix DCDC3 voltageKeerthy2014-11-101-2/+2
| | | | | | | | | DCDC3 supplies voltage to DDR. Fix DCDC3 volatge to 1.5V which is the reset value. Programming to a non-reset value while executing from DDR will result in random hangs. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am43x-epos-evm: Disable QSPI to prevent conflict with GPMC-NANDRoger Quadros2014-09-041-2/+2
| | | | | | | | | | | | | Both QSPI and GPMC-NAND share the same Pin (A8) from the SoC for Chip Select functionality. So both can't be enabled simultaneously. Disable QSPI node to prevent the pin conflict as well as be similar to 3.12 release. CC: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Pekon Gupta <pekon@pek-sem.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am43xx-epos-evm: Don't use read/write wait monitoringRoger Quadros2014-09-041-2/+1
| | | | | | | | | | | | | | NAND uses wait pin only to indicate device readiness after a block/page operation. It is not use to extend individual read/write cycle and so read/write wait pin monitoring must be disabled for NAND. Add gpmc wait pin information as the NAND uses wait pin 0 for device ready indication. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Pekon Gupta <pekon@pek-sem.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am43x-epos-evm: Use BCH16 ECC scheme instead of BCH8Roger Quadros2014-09-041-1/+1
| | | | | | | | | | | | | am43x-epos-evm uses a NAND chip with page size 4096 bytes and spare area of 225 bytes per page. For such a setup it is preferrable to use BCH16 ECC scheme over BCH8. This also makes it compatible with ROM code ECC scheme so we can boot with NAND after flashing from kernel. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Pekon Gupta <pekon@pek-sem.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2014-08-081-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - big update to Wacom driver by Benjamin Tissoires, converting it to HID infrastructure and unifying USB and Bluetooth models - large update to ALPS driver by Hans de Goede, which adds support for newer touchpad models as well as cleans up and restructures the code - more changes to Atmel MXT driver, including device tree support - new driver for iPaq x3xxx touchscreen - driver for serial Wacom tablets - driver for Microchip's CAP1106 - assorted cleanups and improvements to existing drover and input core * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (93 commits) Input: wacom - update the ABI doc according to latest changes Input: wacom - only register once the MODULE_* macros Input: HID - remove hid-wacom Bluetooth driver Input: wacom - add copyright note and bump version to 2.0 Input: wacom - remove passing id for wacom_set_report Input: wacom - check for bluetooth protocol while setting OLEDs Input: wacom - handle Intuos 4 BT in wacom.ko Input: wacom - handle Graphire BT tablets in wacom.ko Input: wacom - prepare the driver to include BT devices Input: hyperv-keyboard - register as a wakeup source Input: imx_keypad - remove ifdef round PM methods Input: jornada720_ts - get rid of space indentation and use tab Input: jornada720_ts - switch to using managed resources Input: alps - Rushmore and v7 resolution support Input: mcs5000_ts - remove ifdef around power management methods Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEP Input: ads7846 - release resources on failure for clean exit Input: wacom - add support for 0x12C ISDv4 sensor Input: atmel_mxt_ts - use deep sleep mode when stopped ARM: dts: am437x-gp-evm: Update binding for touchscreen size ...
| * ARM: dts: am43x-epos-evm: Update binding for touchscreen sizeRoger Quadros2014-07-281-2/+2
| | | | | | | | | | | | | | | | Update the bindings for touchscreen size. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | Merge tag 'omap-for-v3.17/dt-part1' of ↵Olof Johansson2014-07-181-0/+59
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "omap dts changes for v3.17 merge window, part1" from Tony Lindgren: First set of .dts changes for omaps for v3.17 merge window: - Enable irqchip crossbar interrupt mapping. These changes are based on an immutable irqchip branch set up by Jason Cooper to make it easier to merge the related .dts changes. - Removal of omap2 related static clock data that now comes from device tree. - Enabling of PHY regulators for various omaps - Enabling of PCIe for dra7 - Add support for am437x starterkit - Enable audio for for omap5 - Enable display and am335x-evmsk * tag 'omap-for-v3.17/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (43 commits) ARM: DTS: omap5-uevm: Enable basic audio (McPDM <-> twl6040) ARM: DTS: omap5-uevm: Add node for twl6040 audio codec ARM: DTS: omap5-uevm: Enable palmas clk32kgaudio clock ARM: dts: dra7: Add dt data for PCIe controller ARM: dts: dra7: Add dt data for PCIe PHY ARM: dts: dra7: Add dt data for PCIe PHY control module ARM: dts: dra7xx-clocks: Add missing clocks for second PCIe PHY instance ARM: dts: dra7xx-clocks: rename pcie clocks to accommodate second PHY instance ARM: dts: dra7xx-clocks: Add missing 32KHz clocks used for PHY ARM: dts: dra7xx-clocks: Change the parent of apll_pcie_in_clk_mux to dpll_pcie_ref_m2ldo_ck ARM: dts: dra7xx-clocks: Add divider table to optfclk_pciephy_div clock ARM: dts: dra7-evm: Add regulator information to USB2 PHYs ARM: omap2plus_defconfig: enable TPS65218 configs ARM: dts: AM437x: Add TPS65218 device tree nodes ARM: dts: AM437x: Fix i2c nodes indentation ARM: dts: AM43x: Add TPS65218 device tree nodes ARM: dts: Add devicetree for Gumstix Pepper board ARM: dts: dra7: add crossbar device binding ARM: dts: dra7: add routable-irqs property for gic node ARM: OMAP24xx: clock: remove legacy clock data ... Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: dts: AM43x: Add TPS65218 device tree nodesKeerthy2014-07-091-0/+59
| | | | | | | | | | | | | | | | | | | | Add TPS65218 device tree nodes. i2c clock frequency setting also added as part of tps65218 nodes addition. As i2c clock enabling is required. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evmGeorge Cherian2014-06-161-0/+4
|/ | | | | | | | | | AM437x EPOS evm use external clock for RMII interface. Enable the same in DT. Signed-off-by: George Cherian <george.cherian@ti.com> Reported-by: Nishanth Menon <nm@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am43x-epos-evm: add LCD dataTomi Valkeinen2014-06-031-0/+96
| | | | | | | Add DT data for am43x-epos-evm's LCD panel. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am43xx: fix starting offset of NAND.filesystem MTD partitionPekon Gupta2014-05-191-1/+1
| | | | | | | | MTD NAND partition for file-system should start at offset=0xA00000 Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am4372: Add hdq device tree dataSourav Poddar2014-05-141-0/+12
| | | | | | | | Add device tree nodes and pinmux for hdq/1wire on am43x epos evm. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am43x-epos-evm: Correct Touch controller infoRoger Quadros2014-05-061-2/+10
| | | | | | | | | | | Fixup Y resolution and add default pin state. Also update the compatible id. CC: Benoit Cousson <bcousson@baylibre.com> CC: Tony Lindgren <tony@atomide.com> CC: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am43x-epos: Add qspi deviceSourav Poddar2014-05-061-0/+63
| | | | | | | This patch adds qspi nodes for am43xx SOC devices. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am43x-epos-evm: Enable USBGeorge Cherian2014-05-061-0/+18
| | | | | | | | | | | | | Enable - USB PHY - USB for am43x-epos-evm Signed-off-by: George Cherian <george.cherian@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am43x-epos-evm: add SD card hotplug supportBalaji T K2014-03-051-0/+9
| | | | | | | | Add card detect gpio for SD card slot and include dt gpio header. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'for_3.15/dts_signed' of ↵Tony Lindgren2014-03-021-0/+67
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into omap-for-v3.15/dt Add craneboard devices Add more N900 devices Add am43x-epos-evm and am437x-gp-evm devices Add OMAP4 DMM devices Conflicts: arch/arm/boot/dts/am43x-epos-evm.dts arch/arm/boot/dts/dra7.dtsi
| * ARM: dts: am43x-epos-evm: Add SPI data.Sourav Poddar2014-03-021-0/+30
| | | | | | | | | | | | | | Add SPI dts data. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
| * ARM: dts: am43x-epos-evm: Add I2C2 data.Sourav Poddar2014-03-021-0/+13
| | | | | | | | | | | | | | Add I2C2 dts data. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
| * ARM: dts: am43x-epos-evm: Add pwm backlight support.Sourav Poddar2014-03-021-0/+24
| | | | | | | | | | | | | | Add pwm backlight support for am43x epos evm. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
* | ARM: dts: am43xx: add support for parallel NAND flashPekon Gupta2014-03-021-0/+107
|/ | | | | | | | | | | | | | | | | This patch: - enables GPMC h/w and ELM h/w engine for AM43xx devices (am4372.dtsi) - adds pinmux and DT node for Micron 4K-paged x8 NAND device (MT29F4G08AB) present on following boards: am43x-epos-evm: On this board, NAND Flash control lines are muxed with QSPI, Thus only one of the two can be used at a time. Selection is controlled by: (a) dynamically driving following GPIO pin from software GPMC_A0(GPIO) == 0 NAND is selected (default) GPMC_A0(GPIO) == 1 eMMC is selected Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: AM4372: Update Support for EPOS EVMMugunthan V N2013-10-201-0/+168
| | | | | | | | | | | -> Adding pinmux for cpsw, i2c0. -> Enabling the modules that are present in AM4372 EPOS EVM These modules are tested on AM4372 EPOS EVM. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
* ARM: dts: AM43x EPOS EVM supportAfzal Mohammed2013-06-191-0/+18
Add AM43x ePOS EVM minimal DT source - this is a minimal one to get it booting. Also include it in omap2plus dtbs and document bindings. The hardware is under development. Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
OpenPOWER on IntegriCloud