summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* pinctrl: mediatek: Add Pinctrl/GPIO driver for mt6397.Hongzhou Yang2015-05-198-5/+524
| | | | | | | | | | | | | | Add mt6397 support using mediatek common pinctrl driver. mt6397 is a PMIC, and pinctrl/GPIO is part of 6397 chip. Pinctrl/GPIO driver should obtain regmap from PMIC, so adding this support to common code. Also, mt6397 is no need to support interrupt controller, so changing common code to skip it. Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: mediatek: add ies/smt control to common code.Hongzhou Yang2015-05-193-116/+198
| | | | | | | | | | | | | | Input enable and smt setting have different register, modify code to fix it. Several mediatek soc use similar input enable/smt setting procedure as mt8173, some soc use generic input enable/smt setting, some soc has no input enable/smt setting. Adding common code to handle all those cases, so future soc driver can use it. Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: mediatek: add mtk_pctrl_spec_pull_set_samereg common codeYingjoe Chen2015-05-193-121/+136
| | | | | | | | | | | Several mediatek soc use similar pull setting procedure as mt8173, the pupd enable and resistance setting are in the same register. Add common code mtk_pctrl_spec_pull_set_samereg out of spec_pull_set in mt8173 to handle this case, so future soc driver can use it. Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: mediatek: data struct optimize and remove unused memberYingjoe Chen2015-05-192-14/+6
| | | | | | | | | | | | | struct mtk_desc_pin.chip, mtk_pinctrl_devdata.invser_offset and mtk_pinctrl_devdata.chip_type are never used in code. Remove them. Some per-pin data are using int for pin number and offsets. Change to short and rearrange to reduce const data size. Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: mt6397: Add pinfunc header file for mt6397.Hongzhou Yang2015-05-191-0/+256
| | | | | | | Add pinfunc header file, mt8135/mt8173 relate dts will include it. Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: mediatek: Modify pinctrl bindings for mt6397.Hongzhou Yang2015-05-191-2/+7
| | | | | | | | | Since 6397 is no need to support interrupt controller, moving interrupt controller relate property to optional list. Also adding mt8173 and mt8127 to bindings. Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: lpc18xx: add the missing group function mapJoachim Eastwood2015-05-191-7/+76
| | | | | | | | Add the required group function map and fill it at probe using the pin capabilities information already present in the driver. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: cygnus: fixed typo in the gpio driverRay Jui2015-05-191-2/+2
| | | | | | | | Fixed a small typo in the Cygnus GPIO driver Signed-off-by: Jason Uy <jasonuy@broadcom.com> Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: Add Pistachio SoC pin control driverAndrew Bresticker2015-05-123-0/+1513
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a driver for the pin controller present on the IMG Pistachio SoC. This driver provides pinmux and pinconfig operations as well as GPIO and IRQ chips for the GPIO banks. Changes from v4: - Switched to using gpiochip_add_pin_range(). - Fixed up Kconfig entry. Changes from v3: - Addressed review comments from Ezequiel. Changes from v2: - Removed module stuff which would be compiled out. Changes from v1: - Addressed review comments from Linus. - Changed compatible string to "img,pistachio-system-pinctrl". - Look for GPIO sub-nodes by name. - A couple of bug fixes. Signed-off-by: Damien Horsley <Damien.Horsley@imgtec.com> Signed-off-by: Govindraj Raja <govindraj.raja@imgtec.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: James Hartley <james.hartley@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: lpc18xx: create pin cap lookup helperJoachim Eastwood2015-05-121-11/+18
| | | | | | | | | | | | | Both pconf_get_pin and pconf_set_pin needs to lookup pin cap based on the pin number. Create a common helper function that both functions can use that also handles the case where no pin number is found in the pins array. This also fixes a small bug in pconf_get_pin where pconf_get_i2c0 would use the pins array index rather than the pin number. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sh-pfc: r8a73a4: Remove obsolete multi-platform checkGeert Uytterhoeven2015-05-121-4/+0
| | | | | | | | | | | | As of commit 9d07d414d4c33d86 ("ARM: shmobile: r8a73a4: ape6evm: Remove legacy platform"), r8a73a4 is only supported in generic ARM multi-platform builds. Hence CONFIG_ARCH_MULTIPLATFORM is always set, and the check can be removed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sh-pfc: Add renesas,pfc-r8a7793 to binding documentationUlrich Hecht2015-05-121-1/+2
| | | | | | | | | | | Also renames "R-Car M2" to "R-Car M2-W" to avoid confusion. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sh-pfc: Enable building of r8a7793 PFC supportUlrich Hecht2015-05-122-0/+6
| | | | | | | Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sh-pfc: Add r8a7793 supportUlrich Hecht2015-05-123-0/+30
| | | | | | | | | | Regarding pin control, r8a7791 and r8a7793 are identical, so it is sufficient to add an sh_pfc_soc_info structure to enable r8a7793 support. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sh-pfc: r8a7740: Fix typo SCIFAB in commentGeert Uytterhoeven2015-05-121-1/+1
| | | | | | | | | The last serial port is called "SCIFB", not "SCIFAB". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: intel: sunrisepoint: Add Intel Sunrisepoint-H supportMika Westerberg2015-05-121-0/+263
| | | | | | | | | | Intel Sunrisepoint-H is a desktop version of the PCH (Platform Controller Hub). It has slightly different pin configuration compared to the LP version. This patch adds support for Sunrisepoint-H to the existing pinctrl-sunrisepoint.c driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: Grammar s/used in as/used as/Geert Uytterhoeven2015-05-121-1/+1
| | | | | Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sh-pfc: Remove r8a73a4 platform_device_id entryGeert Uytterhoeven2015-05-121-3/+0
| | | | | | | | | | | | | As of commit 9d07d414d4c33d86 ("ARM: shmobile: r8a73a4: ape6evm: Remove legacy platform"), r8a73a4 is only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to match platform devices by name anymore, hence remove the corresponding platform_device_id entry. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: use ERR_CAST instead of ERR_PTR/PTR_ERRFabian Frederick2015-05-061-1/+1
| | | | | | | Inspired by scripts/coccinelle/api/err_cast.cocci Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: Constify irq_domain_opsKrzysztof Kozlowski2015-05-066-6/+6
| | | | | | | | The irq_domain_ops are not modified by the driver and the irqdomain core code accepts pointer to a const data. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: single: Constify irq_domain_opsKrzysztof Kozlowski2015-05-061-1/+1
| | | | | | | | The irq_domain_ops are not modified by the driver and the irqdomain core code accepts pointer to a const data. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: imx: Allow parsing DT without function nodesMarkus Pargmann2015-05-061-9/+46
| | | | | | | | | | | | | | | | | | | | | The old format to define pinctrl settings for imx in DT has two hierarchy levels. The first level are function device nodes. The second level are pingroups which contain a property fsl,pins. The original intention was to define all pin functions in a single dtsi file and just reference the correct ones in the board files. This idea was rejected some time ago leading to the current design to have all the pinfunctions defined in the board files. So we don't need the function device nodes anymore. This patch changes the pinctrl driver to accept devicetrees which do not have the first hierarchy level, function device nodes. For example karo-tx25 already has such a devicetree. Old devicetrees are still parsed and supported. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: zynq: configure SPI SSx pins separatelyHelmut Buchsbaum2015-05-062-10/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since SCLK, MISO and MOSI are the only mandatory signals at Zynq's SPI interfaces, SS0, SS1 and SS2 have to be configured separately as they may be used as simple GPIO lines. This, of course, has to be considered in the devicetree, so pin controller configuration for e.g. an SPI0 using SS0 and SS1 only might look like the following snippet (derived from the example of chapter "17.5.3 MIO/EMIO" Routing of Zynq-7000 TRM UG585). So MIO20 can now be used as GPIO instead of being occupied by SPI0 SS2 function. Note the separate pinmux function for the slave select signals: pinctrl_spi0_default: spi0-default { mux_spi { function = "spi0"; groups = "spi0_0_grp"; }; mux_ss { function = "spi0_ss"; groups = "spi0_0_ss0_grp", "spi0_0_ss1_grp"; } conf-output { pins = "MIO16", "MIO21"; slew-rate = <0>; bias-disable; low-power-disable; io-standard = <1>; }; conf-input { pins = "MIO17"; slew-rate = <0>; bias-high-impedance; low-power-disable; io-standard = <1>; }; conf-select { pins = "MIO18", "MIO19"; slew-rate = <0>; bias-pull-up; low-power-disable; io-standard = <1>; }; }; pinctrl_gpio0_default { mux { function = "gpio0"; groups = "gpio0_20_grp" }; conf { pins = "MIO20"; slew-rate = <0>; bias-pull-up; low-power-disable; io-standard = <1>; }; }; Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@gmail.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: nomadik: assign chips dynamicallyLinus Walleij2015-05-061-31/+30
| | | | | | | | Assign GPIO chip and irqchip to the GPIO container dynamically, so we can set a unique name for each GPIO irqchip and see what chip the hwirq offset actually relates to. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: nomadik: activate strict mux modeLinus Walleij2015-05-062-0/+2
| | | | | | | | This activates strict mode muxing for the Nomadik pin controllers, as these do not allow GPIO and functions to use the same pin simultaneously. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: move strict option to pinmux_opsLinus Walleij2015-05-065-7/+8
| | | | | | | | | | While the pinmux_ops are ideally just a vtable for pin mux calls, the "strict" setting belongs so intuitively with the pin multiplexing that we should move it here anyway. Putting it in the top pinctrl_desc makes no sense. Cc: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: allow exlusive GPIO/mux pin allocationSonic Zhang2015-05-064-0/+28
| | | | | | | | | | | | | | | | | | | | | Disallow simultaneous use of the the GPIO and peripheral mux functions by setting a flag "strict" in struct pinctrl_desc. The blackfin pinmux and gpio controller doesn't allow user to set up a pin for both GPIO and peripheral function. So, add flag strict in struct pinctrl_desc to check both gpio_owner and mux_owner before approving the pin request. v2-changes: - if strict flag is set, check gpio_owner and mux_onwer in if and else clause v3-changes: - add kerneldoc for this struct - augment Documentation/pinctrl.txt Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: add imx7d supportFrank Li2015-05-063-0/+393
| | | | | | | | Add i.MX7D pinctrl driver support Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: Add Pistachio SoC pin control binding documentAndrew Bresticker2015-05-061-0/+217
| | | | | | | | | | | | | | | Add a device-tree binding document for the pin controller present on the IMG Pistachio SoC. Signed-off-by: Damien Horsley <Damien.Horsley@imgtec.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: add DT bindings for lpc1850-scu pinctrl driverJoachim Eastwood2015-05-061-0/+57
| | | | | Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: add lpc18xx pinctrl driverJoachim Eastwood2015-05-063-0/+1154
| | | | | | | | | | | Pinctrl driver for the System Control Unit (SCU) found on NXP LPC18xx/43xx devices. Driver uses the generic pinctrl DT bindings for multiplexing and property settings. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: at91: Add set_multiple GPIO chip featureAlexander Stein2015-05-061-0/+16
| | | | | | | | | | | | | | This adds the callback for set_multiple. As this controller has a separate set and clear register, we can't write directly to PIO_ODSR as this would required a cached variable and would race with at91_gpio_set. So build masks for the PIO_SODR and PIO_CODR registers and write them together. Signed-off-by: Alexander Stein <alexanders83@web.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Linux 4.1-rc2v4.1-rc2Linus Torvalds2015-05-031-1/+1
|
* Merge tag 'for_linus_stable' of ↵Linus Torvalds2015-05-0313-229/+210
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Some miscellaneous bug fixes and some final on-disk and ABI changes for ext4 encryption which provide better security and performance" * tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix growing of tiny filesystems ext4: move check under lock scope to close a race. ext4: fix data corruption caused by unwritten and delayed extents ext4 crypto: remove duplicated encryption mode definitions ext4 crypto: do not select from EXT4_FS_ENCRYPTION ext4 crypto: add padding to filenames before encrypting ext4 crypto: simplify and speed up filename encryption
| * ext4: fix growing of tiny filesystemsJan Kara2015-05-021-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The estimate of necessary transaction credits in ext4_flex_group_add() is too pessimistic. It reserves credit for sb, resize inode, and resize inode dindirect block for each group added in a flex group although they are always the same block and thus it is enough to account them only once. Also the number of modified GDT block is overestimated since we fit EXT4_DESC_PER_BLOCK(sb) descriptors in one block. Make the estimation more precise. That reduces number of requested credits enough that we can grow 20 MB filesystem (which has 1 MB journal, 79 reserved GDT blocks, and flex group size 16 by default). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Eric Sandeen <sandeen@redhat.com>
| * ext4: move check under lock scope to close a race.Davide Italiano2015-05-021-7/+8
| | | | | | | | | | | | | | | | | | | | | | fallocate() checks that the file is extent-based and returns EOPNOTSUPP in case is not. Other tasks can convert from and to indirect and extent so it's safe to check only after grabbing the inode mutex. Signed-off-by: Davide Italiano <dccitaliano@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
| * ext4: fix data corruption caused by unwritten and delayed extentsLukas Czerner2015-05-022-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently it is possible to lose whole file system block worth of data when we hit the specific interaction with unwritten and delayed extents in status extent tree. The problem is that when we insert delayed extent into extent status tree the only way to get rid of it is when we write out delayed buffer. However there is a limitation in the extent status tree implementation so that when inserting unwritten extent should there be even a single delayed block the whole unwritten extent would be marked as delayed. At this point, there is no way to get rid of the delayed extents, because there are no delayed buffers to write out. So when a we write into said unwritten extent we will convert it to written, but it still remains delayed. When we try to write into that block later ext4_da_map_blocks() will set the buffer new and delayed and map it to invalid block which causes the rest of the block to be zeroed loosing already written data. For now we can fix this by simply not allowing to set delayed status on written extent in the extent status tree. Also add WARN_ON() to make sure that we notice if this happens in the future. This problem can be easily reproduced by running the following xfs_io. xfs_io -f -c "pwrite -S 0xaa 4096 2048" \ -c "falloc 0 131072" \ -c "pwrite -S 0xbb 65536 2048" \ -c "fsync" /mnt/test/fff echo 3 > /proc/sys/vm/drop_caches xfs_io -c "pwrite -S 0xdd 67584 2048" /mnt/test/fff This can be theoretically also reproduced by at random by running fsx, but it's not very reliable, though on machines with bigger page size (like ppc) this can be seen more often (especially xfstest generic/127) Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
| * ext4 crypto: remove duplicated encryption mode definitionsChanho Park2015-05-021-6/+0
| | | | | | | | | | | | | | | | | | | | | | This patch removes duplicated encryption modes which were already in ext4.h. They were duplicated from commit 3edc18d and commit f542fb. Cc: Theodore Ts'o <tytso@mit.edu> Cc: Michael Halcrow <mhalcrow@google.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
| * ext4 crypto: do not select from EXT4_FS_ENCRYPTIONHerbert Xu2015-05-021-2/+7
| | | | | | | | | | | | | | | | | | | | This patch adds a tristate EXT4_ENCRYPTION to do the selections for EXT4_FS_ENCRYPTION because selecting from a bool causes all the selected options to be built-in, even if EXT4 itself is a module. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
| * ext4 crypto: add padding to filenames before encryptingTheodore Ts'o2015-05-015-8/+31
| | | | | | | | | | | | | | | | | | | | | | This obscures the length of the filenames, to decrease the amount of information leakage. By default, we pad the filenames to the next 4 byte boundaries. This costs nothing, since the directory entries are aligned to 4 byte boundaries anyway. Filenames can also be padded to 8, 16, or 32 bytes, which will consume more directory space. Change-Id: Ibb7a0fb76d2c48e2061240a709358ff40b14f322 Signed-off-by: Theodore Ts'o <tytso@mit.edu>
| * ext4 crypto: simplify and speed up filename encryptionTheodore Ts'o2015-05-015-204/+149
| | | | | | | | | | | | | | | | | | Avoid using SHA-1 when calculating the user-visible filename when the encryption key is available, and avoid decrypting lots of filenames when searching for a directory entry in a directory block. Change-Id: If4655f144784978ba0305b597bfa1c8d7bb69e63 Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2015-05-0315-94/+117
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm fixes from Dave Airlie: "One intel fix, one rockchip fix, and a bunch of radeon fixes for some regressions from audio rework and vm stability" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915/chv: Implement WaDisableShadowRegForCpd drm/radeon: fix userptr return value checking (v2) drm/radeon: check new address before removing old one drm/radeon: reset BOs address after clearing it. drm/radeon: fix lockup when BOs aren't part of the VM on release drm/radeon: add SI DPM quirk for Sapphire R9 270 Dual-X 2G GDDR5 drm/radeon: adjust pll when audio is not enabled drm/radeon: only enable audio streams if the monitor supports it drm/radeon: only mark audio as connected if the monitor supports it (v3) drm/radeon/audio: don't enable packets until the end drm/radeon: drop dce6_dp_enable drm/radeon: fix ordering of AVI packet setup drm/radeon: Use drm_calloc_ab for CS relocs drm/rockchip: fix error check when getting irq MAINTAINERS: add entry for Rockchip drm drivers
| * \ Merge tag 'drm-intel-fixes-2015-04-30' of ↵Dave Airlie2015-05-042-0/+10
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm-intel into drm-fixes Just a single intel fix * tag 'drm-intel-fixes-2015-04-30' of git://anongit.freedesktop.org/drm-intel: drm/i915/chv: Implement WaDisableShadowRegForCpd
| | * | drm/i915/chv: Implement WaDisableShadowRegForCpdDeepak S2015-04-282-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This WA is avoid problem between shadow vs wake FIFO unload problem during CPD/RC6 transactions on CHV. v2: Define individual bits GTFIFOCTL (Ville) v3: move WA to uncore_early_sanitize (ville) Signed-off-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [Jani: fixed some whitespace issues while applying] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
| * | | Merge branch 'drm-next0420' of ↵Dave Airlie2015-05-042-4/+12
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://github.com/markyzq/kernel-drm-rockchip into drm-fixes one fix and maintainers update * 'drm-next0420' of https://github.com/markyzq/kernel-drm-rockchip: drm/rockchip: fix error check when getting irq MAINTAINERS: add entry for Rockchip drm drivers
| | * | | drm/rockchip: fix error check when getting irqHeiko Stuebner2015-04-201-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | platform_get_irq() can return negative error values and we already test for these. Therefore the variable holding this value should be signed to not loose possible error values. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-By: Daniel Kurtz <djkurtz@chromium.org>
| | * | | MAINTAINERS: add entry for Rockchip drm driversHeiko Stuebner2015-04-201-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mark Yao looks after the Rockchip drm drivers and should thus also get patches touching these. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| * | | | Merge branch 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie2015-04-3011-90/+95
| |\ \ \ \ | | |_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into drm-fixes Fixes for 4.1 for radeon all destined for stable: - fix fallout from the audio rework - VM fixes - other assorted bug fixes * 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix userptr return value checking (v2) drm/radeon: check new address before removing old one drm/radeon: reset BOs address after clearing it. drm/radeon: fix lockup when BOs aren't part of the VM on release drm/radeon: add SI DPM quirk for Sapphire R9 270 Dual-X 2G GDDR5 drm/radeon: adjust pll when audio is not enabled drm/radeon: only enable audio streams if the monitor supports it drm/radeon: only mark audio as connected if the monitor supports it (v3) drm/radeon/audio: don't enable packets until the end drm/radeon: drop dce6_dp_enable drm/radeon: fix ordering of AVI packet setup drm/radeon: Use drm_calloc_ab for CS relocs
| | * | | drm/radeon: fix userptr return value checking (v2)Christian König2015-04-271-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise we print false warning from time to time. v2: agd5f: rebase Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | | drm/radeon: check new address before removing old oneChristian König2015-04-271-14/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise the change isn't atomic. Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
OpenPOWER on IntegriCloud