summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] iscsi class: Add session initiatorname and ifacename sysfs attrs.Mike Christie2008-07-126-39/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | This adds two new attrs used for creating initiator ports and binding sessions to hardware. The session level initiatorname: Since bnx2i does a scsi_host per host device, we need to add the iface initiator port settings on the session, so we can create multiple initiator ports (each with different inames) per device/scsi_host. The current iname reflects that qla4xxx can have one iname per hba, and we are allocating a host per session for software. The iname on the host will remain so we can export and set the hba level qla4xxx setting. The ifacename attr: To bind a session to a some peice of hardware in userspace we maintain some mappings, but during boot or iscsid restart (iscsid contains the user space part of the driver) we need to be able to figure out which of those host mappings abstractions maps to certain sessions. This patch adds a ifacename attr, which userspace can set to id the host side of the endpoint across pivot_roots and iscsid restarts. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi_tcp: hook iscsi_tcp into iscsi_endpoint codeMike Christie2008-07-121-4/+4
| | | | | | | | | iscsi_tcp creates its ep in userspace using sockets because it is virtual, so we just check if we are sent a ep and fail if we are. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iser: Modify iser to take a iscsi_endpoint struct in ep callouts and ↵Mike Christie2008-07-123-62/+43
| | | | | | | | | | | | | session setup This hooks iser into the iscsi endpoint code. Previously it handled the lookup and allocation. This has been made generic so bnx2i and iser can share it. It also allows us to pass iser the leading conn's ep, so we know the ib_deivce being used and can set it as the scsi_host's parent. And that allows scsi-ml to set the dma_mask based on those values. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi class: add endpoint classMike Christie2008-07-123-39/+172
| | | | | | | | | | | | Add sysfs representation for the endpoint, so userspace can match the host and session to the endpoint. This will allow us to set the host's parent correctly at host creation time. The next patches will convert tcp and iser, and fix iser's dma_mask bug. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi class: user device_for_each_child instead of duplicating ↵Mike Christie2008-07-126-37/+104
| | | | | | | | | | | | | session list Currently we duplicate the list of sessions, because we were using the test for if a session was on the host list to indicate if the session was bound or unbound. We can instead use the target_id and fix up the class so that drivers like bnx2i do not have to manage the target id space. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iser: handle iscsi_cmd_task renameMike Christie2008-07-124-202/+203
| | | | | | | | This handles the iscsi_cmd_task rename and renames the iser cmd task to iser task. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi_tcp: handle iscsi_cmd_task renameMike Christie2008-07-122-132/+132
| | | | | | | This converts iscsi_tcp to use the iscsi_task name. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] libiscsi: rename iscsi_cmd_task to iscsi_taskMike Christie2008-07-123-271/+273
| | | | | | | | | This is the second part of the iscsi task merging, and all it does it rename iscsi_cmd_task to iscsi_task and mtask/ctask to just task. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iser: convert ib_iser to support merged tasksMike Christie2008-07-123-70/+68
| | | | | | | Convert ib_iser to support merged tasks. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi_tcp: convert iscsi_tcp to support merged tasksMike Christie2008-07-122-81/+54
| | | | | | | Convert iscsi_tcp to support merged tasks. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] libiscsi: merge iscsi_mgmt_task and iscsi_cmd_taskMike Christie2008-07-123-316/+272
| | | | | | | | | | | There is no need to have the mgmt and cmd tasks separate structs. It used to save a lot of memory when we overprealocated memory for tasks, but the next patches will set up the driver so in the future they can use a mempool or some other common scsi command allocator and common tagging. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] libiscsi: modify libiscsi so it supports offloaded data pathsMike Christie2008-07-121-75/+104
| | | | | | | | | This patch modifies libiscsi, so drivers like bnx2i and iser can execute a command from queuecommand/send_pdu instead of having to be queued to be run in a workq. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] libiscsi, iscsi_tcp, iser: add session cmds array accessorMike Christie2008-07-125-43/+65
| | | | | | | | | | | Currently to get a ctask from the session cmd array, you have to know to use the itt modifier. To make this easier on LLDs and so in the future we can easilly kill the session array and use the host shared map instead, this patch adds a nice wrapper to strip the itt into a session->cmds index and return a ctask. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iser: fix handling of scsi cmnds during recovery.Mike Christie2008-07-124-5/+59
| | | | | | | | | | | | | | | | | | | | After the stop_conn callback has returned the LLD should not touch the scsi cmds. iscsi_tcp and libiscsi use the conn->recv_lock and suspend_rx field to halt recv path processing, but iser does not have any protection. This patch modifies iser so that userspace can just call the ep_disconnect callback, which will halt all recv IO, before calling the stop_conn callback so we do not have to worry about the conn->recv_lock and suspend rx field. iser just needs to stop the send side from accessing the ib conn. Fixup to handle when the ep poll fails and ep disconnect is called from Erez. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi: modify iscsi printk so it can take driver data pointersMike Christie2008-07-121-1/+3
| | | | | | | | | Some drivers want to be able to just pass in the driver data pointers to the iscsi objects. To enable this we need the iscsi printk macro to cast the object. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi: remove session/conn_data_size from iscsi_transportMike Christie2008-07-127-58/+40
| | | | | | | | | This removes the session and conn data_size fields from the iscsi_transport. Just pass in the value like with host allocation. This patch also makes it so the LLD iscsi_conn data is allocated with the iscsi_cls_conn. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi: add iscsi host helpersMike Christie2008-07-126-31/+99
| | | | | | | | This finishes the host/session unbinding, by adding some helpers to add and remove hosts and the session they manage. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi: remove session and host binding in libiscsiMike Christie2008-07-128-216/+225
| | | | | | | | | | | bnx2i allocates a host per netdevice but will use libiscsi, so this unbinds the session from the host in that code. This will also be useful for the iser parent device dma settings fixes. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi class: rename iscsi_host to iscsi_cls_hostMike Christie2008-07-122-14/+12
| | | | | | | | | This renames the iscsi_host to iscsi_cls_host to match the other structs, because libiscsi wants to use the iscsi_host name in the future. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi class, iscsi drivers: remove unused iscsi_transport attrsMike Christie2008-07-126-11/+1
| | | | | | | | | max_cmd_len and max_conn are not really used. max_cmd_len is always 16 and can be set by the LLD. max_conn is always one since we do not support MCS. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] iscsi class, iscsi_tcp/iser: add host arg to session creationMike Christie2008-07-126-13/+51
| | | | | | | | | | | | | iscsi offload (bnx2i and qla4xx) allocate a scsi host per hba, so the session creation path needs a shost/host_no argument. Software iscsi/iser will follow the same behabior as before where it allcoates a host per session, but in the future iser will probably look more like bnx2i where the host's parent is the hardware (rnic for iser and for bnx2i it is the nic), because it does not use a socket layer like how iscsi_tcp does. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] mpt fusion : Adding FAULT Reset polling workPrakash, Sathya2008-07-122-0/+94
| | | | | | | | | | | When the firmware is in Fault state it will be identifed only when the next time the driver access the IOC state. This patch includes a polling function in the driver which will be executed in regular interval to check the status of the firmware and if it is in Fault state, then the firmware will be reset by the driver. Signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] mpt fusion : Setting intial period to 0xFF instead of 0xAPrakash, Sathya2008-07-121-0/+1
| | | | | | | The initial period is set to 0xFF Signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] mpt fusion : Updated copyright statment with 2008 includedPrakash, Sathya2008-06-0515-17/+17
| | | | | | | Updating copyright statement to include the year 2008 Signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] mpt fusion: Driver version upgrade to 3.04.07Prakash, Sathya2008-06-051-2/+2
| | | | | | | Updating driver version to 3.04.07 from 3.04.06 Signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Fix sparse warning by providing new entry in dbfChristof Schmitt2008-06-053-17/+28
| | | | | | | | | | | | | drivers/s390/scsi/zfcp_dbf.c:692:2: warning: context imbalance in 'zfcp_rec_dbf_event_thread' - different lock contexts for basic block Replace the parameter indicating if the lock is held with a new entry function that only acquires the lock. This makes the lock handling more visible and removes the sparse warning. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: remove some __attribute__ ((packed))Martin Peschke2008-06-051-5/+5
| | | | | | | | | | | | | There is no need to pack data structures which describe the contents of records in the new recovery trace. lcrash currently depends on the binary format for the other traces, removing the packed attribute from all traces would break trace debugging with lcrash. Signed-off-by: Martin Peschke <mp3@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Refine trace levels of some recovery related events.Martin Peschke2008-06-051-2/+2
| | | | | | | | | | This change better spreads trace levels of recovery related events. There was an overlap of traces for some recovery triggers and the processing of recovery actions. Signed-off-by: Martin Peschke <mp3@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Add information about interrupt to trace.Martin Peschke2008-06-054-2/+7
| | | | | | | | | | Store the index of the buffer in the inbound queue used to report request completion in trace record for request coompletion. This piece of information allows to better compare qdio and zfcp traces. Signed-off-by: Martin Peschke <mp3@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Rename sbal_curr to sbal_last.Martin Peschke2008-06-055-31/+30
| | | | | | | | sbal_last is more appropriate, because it matches sbal_first. Signed-off-by: Martin Peschke <mp3@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Rename sbal_last.Martin Peschke2008-06-052-5/+5
| | | | | | | | | sbal_last is confusing, as it is not the last one actually used, but just a limit. sbal_limit is a better name. Signed-off-by: Martin Peschke <mp3@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Remove field sbal_last from trace record.Martin Peschke2008-06-052-3/+0
| | | | | | | | | This field is not needed, because it designates an index with a fix offset from sbal_first. It's name is confusing anyway. Signed-off-by: Martin Peschke <mp3@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Remove some sparse warningsChristof Schmitt2008-06-051-1/+2
| | | | | | | | | Remove some sparse warnings by telling sparse that zfcp_req_create acquires the lock for the request queue. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Fix fsf_status_read return code handlingHeiko Carstens2008-06-051-4/+3
| | | | | | | | | If allocation of a status buffer failed the function incorrectly returned 0 instead of -ENOMEM. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Fix mempool pointer for GID_PN request allocationChristof Schmitt2008-06-051-6/+3
| | | | | | | | | | | | | When allocating memory for GID_PN nameserver requests, the allocation function stores the pointer to the mempool, but then overwrites the pointer via memset. Later, the wrong function to free the memory will be called, since this is based on the stored pointer. Fix this by first initializing the struct and then storing the pointer. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: receiving an unsolicted status can lead to I/O stallSwen Schillig2008-06-056-35/+32
| | | | | | | | | | | | | | | | | Processing of an unsolicted status request can lead to a locking race of the request_queue's queue_lock during the recreation of the used up status read request while still in interrupt context of the response handler. Detaching the 'refill' of the long running status read requests from the handler to a scheduled work is solving this issue. In addition, each refill-run is trying to re-establish the full amount of status read requests, which might have failed in earlier runs. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] mpt fusion: make struct mpt_proc_root_dir staticAdrian Bunk2008-06-052-3/+1
| | | | | | | | This patch makes the needlessly global struct mpt_proc_root_dir static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: "Prakash, Sathya" <Sathya.Prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] make use of the residue valueJames Bottomley2008-06-051-0/+9
| | | | | | | | | | | USB sometimes doesn't return an error but instead returns a residue value indicating part (or all) of the command wasn't completed. So if the driver _done() error processing indicates the command was fully processed, subtract off the residue so that this USB error gets propagated. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] SCSI: remove dev->power.power_state from mesh driverAlan Stern2008-06-051-6/+2
| | | | | | | | | power.power_state is scheduled for removal. This patch (as1055) removes all uses of that field from the SCSI mesh driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Paul Mackerras <paulus@au.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: linit.c make aac_show_serial_number staticHarvey Harrison2008-06-051-1/+1
| | | | | | | | drivers/scsi/aacraid/linit.c:865:9: warning: symbol 'aac_show_serial_number' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] aacraid: Add Power Management cards to documentationMark Salyzyn2008-06-051-5/+19
| | | | | | | Update the documented list of products supported by the aacraid driver. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: sysfs attributes for fabric and channel latenciesChristof Schmitt2008-06-051-0/+65
| | | | | | | | | | | | | | | | | | | | | The latency information is provided on a SCSI device level (LUN) which can be found at the following location  /sys/class/scsi_device/<H:C:T:L>/device/cmd_latency  /sys/class/scsi_device/<H:C:T:L>/device/read_latency  /sys/class/scsi_device/<H:C:T:L>/device/write_latency Each sysfs attribute provides the available data: min, max and sum for fabric and channel latency and the number of requests processed. An overrun of the variables is neither detected nor treated. The file has to be read twice to make a meaningful statement, because only the differences of the values between the two reads can be used. A reset of the values can be achieved by writing to the attribute. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] zfcp: Track fabric and channel latencies provided by FCP adapterChristof Schmitt2008-06-054-1/+82
| | | | | | | | | | Add the infrastructure to retrieve the fabric and channel latencies from FSF commands for each SCSI command that has been processed. For each unit, the sum, min, max and number of requests is tracked. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi_dh: Remove hardware handler infrastructure from dmChandra Seetharaman2008-06-054-278/+1
| | | | | | | | | This patch just removes infrastructure that provided support for hardware handlers in the dm layer as it is not needed anymore. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Acked-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi_dh: Remove hardware handlers from dmChandra Seetharaman2008-06-055-1315/+0
| | | | | | | | | | | This patch removes the 3 hardware handlers that currently exist under dm as the functionality is moved to SCSI layer in the earlier patches. [jejb: removed more makefile hunks and rejection fixes] Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Acked-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi_dh: Remove dm_pg_init_completeChandra Seetharaman2008-06-051-41/+0
| | | | | | | | | | This patch just removes the dm layer's path initialization completion routine. This is separated from the other patch(scsi_dh: Use SCSI device handler in dm-multipath) Just to make that patch more readable. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Acked-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi_dh: Add a single threaded workqueue for initializing pathsChandra Seetharaman2008-06-051-7/+34
| | | | | | | | | | | | | | | | | | | | | | | | Before this patch set (SCSI hardware handlers), initialization of a path was done asynchronously. Doing that requires a workqueue in each device/hardware handler module and leads to unneccessary complication in the device handler code, making it difficult to read the code and follow the state diagram. Moving that workqueue to this level makes the device handler code simpler. Hence, the workqueue is moved to dm level. A new workqueue is added instead of adding it to the existing workqueue (kmpathd) for the following reasons: 1. Device activation has to happen faster, stacking them along with the other workqueue might lead to unnecessary delay in the activation of the path. 2. The effect could be felt the other way too. i.e the current events that are handled by the existing workqueue might get a delayed response. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Acked-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi_dh: Use SCSI device handler in dm-multipathChandra Seetharaman2008-06-052-51/+81
| | | | | | | | | | | | | | | | | | | | | | | This patch converts dm-mpath to use scsi device handlers instead of dm's hardware handlers. This patch does not add any new functionality. Old behaviors remain and userspace tools work as is except that arguments supplied with hardware handler are ignored. One behavioral exception is: Activation of a path is synchronous in this patch, opposed to the older behavior of being asynchronous (changed in patch 07: scsi_dh: Add a single threaded workqueue for initializing a path) Note: There is no need to get a reference for the device handler module (as it was done in the dm hardware handler case) here as the reference is held when the device was first found. Instead we check and make sure that support for the specified device is present at table load time. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi_dh: add EMC Clariion device handlerChandra Seetharaman2008-06-053-0/+506
| | | | | | | | | This adds support for EMC Clariions. This patch has the features that currently exists in mainline and advanced features from Ed's patches. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi_dh: add hp sw device handlerMike Christie2008-06-053-0/+211
| | | | | | | | | This patch provides the device handler to support the older hp boxes which cannot be upgraded. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
OpenPOWER on IntegriCloud