summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* [ARM] 4189/1: AT91: MACB Ethernet clockAndrew Victor2007-02-142-6/+6
| | | | | | | | The MACB Ethernet driver searches for a "macb_clk" clock, so rename the "ether_clk" on the SAM9260 and SAM9263 to "macb_clk". Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4154/1: AT91: Clock updateAndrew Victor2007-02-081-33/+29
| | | | | | | | | | | | | | | | | | | | Unconditionally disabling the PCKs (Programmable Clocks) is not a good idea as it breaks boards that depend on those clocks being enabled by bootloaders. Therefore only disable unused clocks late in the init process, giving the board init code the chance to claim the clock. Patch from Steven Scholz. Since the HCK clocks on SAM9261 are already being registered as a independent clocks, we don't need the special case for HCK0 on the SAM9261. Platform-init code and drivers should use the clock API to enable/disable the clock. Patch from Nicolas Ferre. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4151/1: AT91 / AVR32: Move at91_pdc.h to linux/atmel_pdc.hAndrew Victor2007-02-085-96/+61
| | | | | | | | | | | | | | | | | | | | | The Atmel AT91 and AVR32 processor architectures share many of the same peripherals. The PDC (Peripheral Data Controller) registers are also implemented within in a number of the on-chip peripherals (eg, USART, MMC, SPI, SSC, etc). In a attempt not to duplicate the register definitions in each peripheral, or in each architecture, the at91_pdc.h header in asm-arm/arch-at91 and asm-avr32/arch-at32ap has been replaced with linux/atmel_pdc.h. The definitions have also been renamed from AT91_PDC_* to ATMEL_PDC_*, and the drivers updated accordingly. Original patch from Nicolas Ferre. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4150/1: AT91: LED updateAndrew Victor2007-02-084-4/+12
| | | | | | | | | | The GPIO pin setup should be handed by the platform-setup code, and not directly by the driver. Original patch from David Brownell. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4149/1: AT91: Overrun in SAM9 gettimeoffset().Andrew Victor2007-02-081-2/+1
| | | | | | | | | | Fix an overrun in the AT91SAM9 gettimeoffset() function. This causes the time value returned by gettimeofday() to jump "backwards". Original patch from Michel Benoit. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4148/1: AT91: Physically mapped flash on CSB337 and CSB637 boards.Andrew Victor2007-02-084-4/+86
| | | | | | | | Define the physically mapped flash on the Cogent CSB337 and CSB637 boards. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4147/1: AT91: Define Timer/Counter clocks.Andrew Victor2007-02-083-4/+90
| | | | | | | | | | Define the Timer/Counter Unit clocks on the AT91RM9200, AT91SAM9260 and AT91SAM9261 processors. Original patch from David Brownell. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4146/1: AT91: Support for AT91SAM9263-EK board.Andrew Victor2007-02-084-2/+1380
| | | | | | | | | Add support for the Atmel AT91SAM9263-EK board. Original patch from Nicolas Ferre. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4145/2: AT91: Add support for AT91SAM9263 processorAndrew Victor2007-02-0815-5/+1425
| | | | | | | | | | Add support for the Atmel AT91SAM9263 processor. It is similar to the AT91SAM9260 but with more integrated peripherals, 5 GPIO banks, etc. Original patch from Nicolas Ferre. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4143/1: AT91: Prepare for AT91SAM9263 supportAndrew Victor2007-02-0818-62/+72
| | | | | | | | | | | | | | | | | | | | | The Atmel AT91SAM9263 processor includes many more integrated peripherals than Atmel's previous ARM9-based AT91 processors, so this has necessitated a few changes to the core AT91 support. These changes are: * The system peripheral I/O region we remap has increased from 0xFFFA0000..0xFFFFFFFF to 0xFFF78000..0xFFFFFFFF. * The increased I/O region forces changes to entry-macro.S and debug-macro.S due to ARM's limited immediate offset addressing modes. * Maximum number of GPIO banks increases to 5. * 2 MMC controllers so the board-setup code needs to specify which controller it wishes to use when calling at91_add_device_mmc(). Original patch from Nicolas Ferre. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4124/1: Rename mach-at91rm9200 and arch-at91rm9200 directoriesAndrew Victor2007-02-0875-71/+71
| | | | | | | | | | | | | | | Now that Linux includes support for the Atmel AT91SAM9260 and AT91SAM9261 processors in addition to the original Atmel AT91RM9200 (with support for more AT91 processors pending), the "mach-at91rm9200" and "arch-at91rm9200" directories should be renamed to indicate their more generic nature. The following git commands should be run BEFORE applying this patch: git-mv arch/arm/mach-at91rm9200 arch/arm/mach-at91 git-mv include/asm-arm/arch-at91rm9200 include/asm-arm/arch-at91 Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4119/1: AT91: Fix build of AT91SAM9260Andrew Victor2007-02-083-4/+8
| | | | | | | | | | | | | | | | | | | Fix build failure of AT91SAM9260. The AT91RM9200 ethernet driver (at91_ether.c) stores platform data in a "struct at91_eth_data" structure, but the AT91SAM9260 (and AT91SAM9263) ethernet driver (macb.c) [developed on the AVR32 architecture] expects a "struct eth_platform_data". Since the platform data of the two drivers is very similar, we continue to use the "struct at91_eth_data" for all AT91 processors but add a #define eth_platform_data at91_eth_data in board.h to keep the MACB driver happy. Original patch by Jan Altenberg. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Move processor_modes[] to .../process.cRussell King2007-02-063-12/+9
| | | | | | | | | | | | | | bad_mode() currently prints the mode which caused the exception, and then causes an oops dump to be printed which again displays this information (since the CPSR in the struct pt_regs is correct.) This leads to processor_modes[] being shared between traps.c and process.c with a local declaration of it. We can clean this up by moving processor_modes[] to process.c and removing the duplication, resulting in processor_modes[] becoming static. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4047/1: Add initial board support for Contec Hypercontrol Micro9 boards.Manfred Gruber2007-02-063-0/+183
| | | | | | | | Contec Micro9 (H/M/L) boards based on Cirrus Logic ep93xx (ep9315/ep9307/ep9302). Signed-off-by: Manfred Gruber <m.gruber@tirol.com> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4032/1: Add platform resources required for CF driverMichael-Luke Jones2007-02-061-0/+40
| | | | | | | | | | This patch adds the platform resources required to support the ixp4xx-pata-cf libata driver on Avila Gateworks boards. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4033/1: Add separate Avila board setup codeMichael-Luke Jones2007-02-067-2/+291
| | | | | | | | | | | | This patch adds support for the Gateworks Avila Network Platform in a separate set of setup files to the IXDP425. This is necessary now that a driver for the Avila CF card slot is available. It also adds support for a minor variant on the Avila board known as the Loft, which has a different number of maximum PCI devices. Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4031/1: Remove references to the Avila in ixdp425 setup codeMichael-Luke Jones2007-02-062-21/+1
| | | | | | | | | | This patch removes references to the Gateworks Avila Network Platform in the ixdp425 setup code. Avila setup should occur separately now that a CF ATA device driver is available. Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Improve csum_fold, cleanup csum_tcpudp_magic()Russell King2007-02-061-38/+18
| | | | | | | | | | | | | | | csum_fold doesn't need two assembly instructions to perform its task, it can simply add the high and low parts together by rotating by 16 bits, and the carry into the upper-16 bits will automatically happen. Also, since csum_tcpudp_magic() is just csum_tcpudp_nofold + csum_fold, use those two functions to achieve this. Also note that there is a csum_fold() at the end of ip_fast_csum() as well, so use the real csum_fold() there as well. Boot tested on Versatile. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] oprofile: add ARM11 SMP supportRussell King2007-02-067-0/+381
| | | | | | | Add the glue for ARM11 SMP oprofile support, which also supports the performance monitor in the coherency unit. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] oprofile: add ARM11 UP supportRussell King2007-02-065-0/+84
| | | | | | | | Add oprofile glue for ARM11 (ARMv6) oprofile support. This connects the ARM11 core profiling support to the oprofile code for uniprocessor configurations. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] oprofile: add ARM11 core supportRussell King2007-02-064-1/+211
| | | | | | | Add basic support for the ARM11 profiling hardware. This is shared between the ARM11 UP and ARM11 SMP oprofile support code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Linux 2.6.20v2.6.20Linus Torvalds2007-02-041-1/+1
|
* [PATCH] EFI x86: pass firmware call parameters on the stackFrédéric Riss2007-02-041-16/+73
| | | | | | | | | | When calling into the EFI firmware, the parameters need to be passed on the stack. The recent change to use -mregparm=3 breaks x86 EFI support. This patch is needed to allow the new Intel-based Macs to suspend to ram (efi.get_time is called during the suspend phase). Signed-off-by: Frederic Riss <frederic.riss@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] fix rtl8150Al Viro2007-02-031-1/+2
| | | | | | | That code doesn't do what its author apparently thought it would do... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds2007-02-0310-70/+100
|\ | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] sd: udev accessing an uninitialized scsi_disk field results in a crash [SCSI] st: A MTIOCTOP/MTWEOF within the early warning will cause the file number to be incorrect [SCSI] qla4xxx: bug fixes [SCSI] Fix scsi_add_device() for async scanning
| * [SCSI] sd: udev accessing an uninitialized scsi_disk field results in a crashNagendra Singh Tomar2007-02-021-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sd_probe() calls class_device_add() even before initializing the sdkp->device variable. class_device_add() eventually results in the user mode udev program to be called. udev program can read the the allow_restart attribute of the newly created scsi device. This is resulting in a crash as the show function for allow_restart (i.e sd_show_allow_restart) returns the attribute value by reading the sdkp->device->allow_restart variable. As the sdkp->device is not initialized before calling the user mode hotplug helper, this results in a crash. The patch below solves it by calling class_device_add() only after the necessary fields in the scsi_disk structure are initialized properly. Signed-off-by: Nagendra Singh Tomar <nagendra_tomar@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] st: A MTIOCTOP/MTWEOF within the early warning will cause the file ↵Kai Makisara2007-01-271-8/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | number to be incorrect On Wed, 24 Jan 2007, Andrew Morton wrote: > On Mon, 22 Jan 2007 13:07:20 -0800 > bugme-daemon@bugzilla.kernel.org wrote: > > > http://bugzilla.kernel.org/show_bug.cgi?id=7864 > > > > Summary: A MTIOCTOP/MTWEOF within the early warning will cause > > the file number to be incorrect > > Kernel Version: 2.6.19.2 > > Status: NEW > > Severity: low > > Owner: io_scsi@kernel-bugs.osdl.org > > Submitter: ce_reisinger@yahoo.com > > > > > > Write records to a SCSI tape until a write fails with a ENOSPC (you have reached > > early warning. > > Now perform a: > > struct mtget before, after; > > ioctl(fd, MTIOCGET, &before); > > struct mtop mtop = { MTWEOF, 1 }; > > ioctl(fd, MTIOCTOP, &mtop); > > ioctl(fd, MTIOCGET, &after); > > > > Check the value of mt_fileno in the before and after structures. Notice the > > after is 2 greater then the before. > > > > The problem appears to be in the block of code starting at line 2817 in st.c. > > This block is entered because the drive did return a CHECK CONDITION with NO > > SENSE and the SENSE_EOM bit set. At lines 2824/5 the fileno is incremented. But > > it has already been increased by the number of filemarks requested by the > > MTIOCTOP. I believe that the residue count in the sense data should be > > subtracted from fileno, not a increment as is done. > > > > Thanks. Could you please send us a tested patch to fix these things, as > per http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt ? > The analysis is basically correct and explains the bug. According to the SCSI standards, the sense code is NO SENSE or RECOVERED ERROR in case writing filemark(s) succeeds. If it fails (partly or completely) the sense code is VOLUME OVERFLOW. The patch below is tested to fix the case when one filemark is successfully written after the EOM early warning. It should also fix the case at real EOM but this has not been tested. Carl, thanks for reporting the bug and providing the analysis for the fix. Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla4xxx: bug fixesDavid C Somayajulu2007-01-277-52/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The included patch fixes the following issues: 1. qla3xxx/qla4xxx co-existence issue which can result in a lockup when qla3xxx driver is unloaded, or when ifdown; ifup is performed on one of the interfaces correponding to qla3xxx. This is because qla4xxx HBA supports one ethernet and iscsi interfaces per port. Both iscsi and ethernet interfaces share the same state machine. The problem has to do with synchronizing access to the state machine in the event of a reset 2. mutex_lock() is sometimes not followed by mutex_unlock() prior to invoking a msleep() in qla4xxx_mailbox_command() Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] Fix scsi_add_device() for async scanningMatthew Wilcox2007-01-271-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | I had thought that all drivers which didn't call scsi_scan_host() called scsi_scan_target(). Some, such as sbp2, mptsas and libata-scsi, call scsi_add_device() or __scsi_add_device(). We just need to wait for the currently executing async scans to complete first. This is the same code that's in scsi_scan_target(), except that we have to return an error instead of void when we're declining to scan at all. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* | [PATCH] x86-64: define dma noncoherent API functionsJeff Garzik2007-02-031-0/+3
| | | | | | | | | | | | | | | | x86-64 is missing these: Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | [PATCH] Altix: more ACPI PRT supportJohn Keller2007-02-031-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SN Altix platform does not conform to the IOSAPIC IRQ routing model. Add code in acpi_unregister_gsi() to check if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM) and return. Due to an oversight, this code was not added previously when similar code was added to acpi_register_gsi(). http://marc.theaimsgroup.com/?l=linux-acpi&m=116680983430121&w=2 Signed-off-by: John Keller <jpk@sgi.com> Acked-by: Len Brown <lenb@kernel.org> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | [PATCH] revert blockdev direct io back to 2.6.19 versionAndrew Morton2007-02-031-0/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Andrew Vasquez is reporting as-iosched oopses and a 65% throughput slowdown due to the recent special-casing of direct-io against blockdevs. We don't know why either of these things are occurring. The patch minimally reverts us back to the 2.6.19 code for a 2.6.20 release. Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: Ken Chen <kenchen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | [PATCH] alpha: fix epoll syscall enumerationsMike Frysinger2007-02-031-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | We went and named them __NR_sys_foo instead of __NR_foo. It may be too late to change this, but we can at least add the proper names now. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | [PATCH] net/smc911x: match up spin lock/unlockPeter Korsgaard2007-02-031-2/+3
| | | | | | | | | | | | | | | | | | | | | | smc911x_phy_configure's error handling unconditionally unlocks the spinlock even if it wasn't locked. Patch fixes it. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Cc: Jeff Garzik <jeff@garzik.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | [PATCH] kexec: Avoid migration of already disabled irqs (ia64)Magnus Damm2007-02-031-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes up ia64 kexec support for HP rx2620 hardware. It does this by skipping migration of already disabled irqs. This is most likely a problem on other ia64 platforms as well, but I've only been able to reproduce it on one machine so far. The full story is that handle_bad_irq() gets invoked before starting the new kernel without this patch. This seems to happen when fixup_irqs() calls generic_handle_irq() on already migrated (and disabled) irqs. So by avoiding migration of disabled irqs we stay away of handle_bad_irq(). The code has been tested on three different ia64 machines, all with good results. It is possible to trigger the same bug by offlining a processor using echo 0 > /sys/devices/system/cpu/cpuX/online. More detailed information is available in the following mail thread: http://lists.osdl.org/pipermail/fastboot/2007-January/thread.html#5774 Signed-off-by: Magnus Damm <magnus@valinux.co.jp> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Zou, Nanhai <nanhai.zou@intel.com> Acked-by: Jay Lan <jlan@sgi.com> Acked-by: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | [PATCH] aio: fix buggy put_ioctx call in aio_complete - v2Ken Chen2007-02-031-11/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An AIO bug was reported that sleeping function is being called in softirq context: BUG: warning at kernel/mutex.c:132/__mutex_lock_common() Call Trace: [<a000000100577b00>] __mutex_lock_slowpath+0x640/0x6c0 [<a000000100577ba0>] mutex_lock+0x20/0x40 [<a0000001000a25b0>] flush_workqueue+0xb0/0x1a0 [<a00000010018c0c0>] __put_ioctx+0xc0/0x240 [<a00000010018d470>] aio_complete+0x2f0/0x420 [<a00000010019cc80>] finished_one_bio+0x200/0x2a0 [<a00000010019d1c0>] dio_bio_complete+0x1c0/0x200 [<a00000010019d260>] dio_bio_end_aio+0x60/0x80 [<a00000010014acd0>] bio_endio+0x110/0x1c0 [<a0000001002770e0>] __end_that_request_first+0x180/0xba0 [<a000000100277b90>] end_that_request_chunk+0x30/0x60 [<a0000002073c0c70>] scsi_end_request+0x50/0x300 [scsi_mod] [<a0000002073c1240>] scsi_io_completion+0x200/0x8a0 [scsi_mod] [<a0000002074729b0>] sd_rw_intr+0x330/0x860 [sd_mod] [<a0000002073b3ac0>] scsi_finish_command+0x100/0x1c0 [scsi_mod] [<a0000002073c2910>] scsi_softirq_done+0x230/0x300 [scsi_mod] [<a000000100277d20>] blk_done_softirq+0x160/0x1c0 [<a000000100083e00>] __do_softirq+0x200/0x240 [<a000000100083eb0>] do_softirq+0x70/0xc0 See report: http://marc.theaimsgroup.com/?l=linux-kernel&m=116599593200888&w=2 flush_workqueue() is not allowed to be called in the softirq context. However, aio_complete() called from I/O interrupt can potentially call put_ioctx with last ref count on ioctx and triggers bug. It is simply incorrect to perform ioctx freeing from aio_complete. The bug is trigger-able from a race between io_destroy() and aio_complete(). A possible scenario: cpu0 cpu1 io_destroy aio_complete wait_for_all_aios { __aio_put_req ... ctx->reqs_active--; if (!ctx->reqs_active) return; } ... put_ioctx(ioctx) put_ioctx(ctx); __put_ioctx bam! Bug trigger! The real problem is that the condition check of ctx->reqs_active in wait_for_all_aios() is incorrect that access to reqs_active is not being properly protected by spin lock. This patch adds that protective spin lock, and at the same time removes all duplicate ref counting for each kiocb as reqs_active is already used as a ref count for each active ioctx. This also ensures that buggy call to flush_workqueue() in softirq context is eliminated. Signed-off-by: "Ken Chen" <kenchen@google.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: Suparna Bhattacharya <suparna@in.ibm.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: <stable@kernel.org> Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | [NETFILTER]: nf_conntrack_h323: fix compile error with CONFIG_IPV6=m, ↵Adrian Bunk2007-02-021-1/+1
| | | | | | | | | | | | | | | | | | CONFIG_NF_CONNTRACK_H323=y Fix this by letting NF_CONNTRACK_H323 depend on (IPV6 || IPV6=n). Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | [NETFILTER]: ctnetlink: fix compile failure with NF_CONNTRACK_MARK=nPatrick McHardy2007-02-022-0/+4
| | | | | | | | | | | | | | | | | | | | CC net/netfilter/nf_conntrack_netlink.o net/netfilter/nf_conntrack_netlink.c: In function 'ctnetlink_conntrack_event': net/netfilter/nf_conntrack_netlink.c:392: error: 'struct nf_conn' has no member named 'mark' make[3]: *** [net/netfilter/nf_conntrack_netlink.o] Error 1 Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'upstream-linus' of ↵Linus Torvalds2007-02-026-18/+21
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: Initialize nbytes for internal sg commands libata: Fix ata_busy_wait() kernel docs pata_via: Correct missing comments pata_atiixp: propogate cable detection hack from drivers/ide to the new driver ahci/pata_jmicron: fix JMicron quirk
| * | libata: Initialize nbytes for internal sg commandsBrian King2007-02-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Some LLDDs, like ipr, use nbytes and pad_len to determine the total data transfer length of a command. Make sure nbytes gets initialized for internally generated commands. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | libata: Fix ata_busy_wait() kernel docsAlan2007-02-021-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | > Looks like you should use ata_busy_wait() here, rather than reproducing > the same code again. It waits in 10uS chunks while 1uS chunks were used in the workaround. Could indeed do that once I know the fix is right. While I'm at it the ata_busy_wait kerneldoc is borked so here's a fix Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | pata_via: Correct missing commentsAlan2007-02-021-1/+2
| | | | | | | | | | | | | | | | | | | | | The 8237S was added to the chipsets but not to the comments. Fix this Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | pata_atiixp: propogate cable detection hack from drivers/ide to the new driverAlan2007-02-021-2/+9
| | | | | | | | | | | | | | | Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | ahci/pata_jmicron: fix JMicron quirkTejun Heo2007-02-022-15/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For all JMicrons except for 361 and 368, AHCI mode enable bits in the Control(1) should be set. This used to be done in both ahci and pata_jmicron but while moving programming to PCI quirk, it was removed from ahci part while still left in pata_jmicron. The implemented JMicron PCI quirk was incorrect in that it didn't program AHCI mode enable bits. If pata_jmicron is loaded first and programs those bits, the ahci ports work; otherwise, ahci device detection fails miserably. This patch makes JMicron PCI quirk clear SATA IDE mode bits and set AHCI mode bits and remove the respective part from pata_jmicron. Tested on JMB361, 363 and 368. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | Merge branch 'upstream-linus' of ↵Linus Torvalds2007-02-0210-218/+199
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: spidernet : fix memory leak in spider_net_stop e100: fix napi ifdefs removing needed code netxen patches
| * | | spidernet : fix memory leak in spider_net_stopJens Osterkamp2007-02-021-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We forget to call spider_net_free_rx_chain_contents which does the actual dev_kfree_skb. New skbs are allocated from skbuff_head_cache on each "ifconfig up" letting the cache grow infinitely. This patch fixes it. Signed-off-by: Jens Osterkamp <jens@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | e100: fix napi ifdefs removing needed codeAuke Kok2007-02-021-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | e100: fix napi ifdefs removing needed code From: Auke Kok <auke-jan.h.kok@intel.com> The e100 driver is NAPI mode only. We need to netif_poll_disable during suspend and shutdown. The non-NAPI driver code was removed and is only avaiable in the out-of-tree e100 kernel driver. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | Merge ../linux-2.6Jeff Garzik2007-02-0230-104/+154
| |\ \ \ | | |/ /
| * | | netxen patchesAl Viro2007-01-318-212/+196
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Have fun. >From 24f4a1a77431575a9cdfaae25adda85842099f70 Mon Sep 17 00:00:00 2001 From: Al Viro <viro@zeniv.linux.org.uk> Date: Mon, 1 Jan 2007 15:22:56 -0500 Subject: [PATCH] netxen trivial annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/bnx2-2.6Linus Torvalds2007-02-022-2/+18
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/bnx2-2.6: [BNX2]: PHY workaround for 5709 A0.
OpenPOWER on IntegriCloud