summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* MIPS: BCM47XX: add Microsoft MN-700 and Asus WL500GHauke Mehrtens2014-07-304-0/+58
| | | | | | | | | | | This patch adds detection for the Microsoft MN-700 and the Asus WL500G router. This is based on some old code from OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: zajec5@gmail.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7490/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM47XX: fixup broken MAC addresses in nvramHauke Mehrtens2014-07-301-0/+48
| | | | | | | | | | | | | | | | | | The address prefix 00:90:4C is used by Broadcom in their initial configuration. When a mac address with the prefix 00:90:4C is used all devices from the same series are sharing the same mac address. To prevent mac address collisions we replace them with a mac address based on the base address. To generate such addresses we take the main mac address from et0macaddr and increase it by two for the first wifi device and by 3 for the second one. This matches the printed mac address on the device. The main mac address increased by one is used as wan address by the vendor code. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: zajec5@gmail.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7489/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM47XX: make reboot more relaiableHauke Mehrtens2014-07-301-2/+2
| | | | | | | | | | | | | | | | | The reboot on the BCM47XX SoCs is done, by setting the watchdog counter to 1 and let it trigger a reboot, when it reaches 0. Some devices with a BCM4705/BCM4785 SoC do not reboot when the counter is set to 1 and decreased to 0 by the hardware. It looks like it works more reliable when we set it to 3. As far as I understand the hardware, this should not make any difference, but I do not have access to any documentation for this SoC. It is still not 100% reliable. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: zajec5@gmail.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7488/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: TXx9: Delete an unused variable in tx4927_pcibios_setupAtsushi Nemoto2014-07-301-2/+0
| | | | | | | Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7216/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: TXx9: Add __init_refok annotation to quirk_slc90e66_bridgeAtsushi Nemoto2014-07-301-1/+1
| | | | | | | | | | | This pci fixup routine calls __init functions. In general pci fixup routine must not call __init functions, but this pci/isa bridge device is not hotpluggable anyway. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7215/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: TXx9: Fix quirk_slc90e66_ideAtsushi Nemoto2014-07-301-1/+1
| | | | | | | | | | | Fix wrong code spotted by -Werror=array-bounds: arch/mips/txx9/generic/pci.c:334:23: error: array subscript is above array bounds [-Werror=array-bounds] pci_write_config_byte(dev, regs[i], dat); Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7214/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: SB1: Check optional compilation flags one by oneMaciej W. Rozycki2014-07-301-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | This fixes a regression caused by commit bb6c0bd3fdb67c8a1fceea1d4700b9ee593309f9 [MIPS: SB1: Fix excessive kernel warnings.], that makes `-march=r5000' selected for compilation flags rather than supposed `-march=sb1' with compilers that do not support the ASE selection flags introduced with that change. For example GCC 4.1.2 supports `-mips3d'/`-mno-mips3d' (and obviously `-march=sb1'), however it does not support `-mdmx'/`-mno-mdmx'. As a result the whole selection of flags fails and compilation resorts to using `-march=r5000', meant for really old compilers indeed only. It is always best to pick the flags individually unless we are absolutely sure a set of flags was introduced to the toolchain together (`-march=sb1' and `-mtune=sb1' would be a good example), and this change makes it happen for CONFIG_CPU_SB1. Consequently the flags ultimately selected with GCC 4.1.2 are `-march=sb1 -Wa,--trap -mno-mips3d' Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Richard Sandiford <rdsandiford@googlemail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7223/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: asm/bitops.h: Guard CLZ with `.set mips32'Maciej W. Rozycki2014-07-301-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | This fixes: {standard input}: Assembler messages: {standard input}:145: Error: opcode not supported on this processor: vr5000 (mips4) `clz $2,$2' {standard input}:920: Error: opcode not supported on this processor: vr5000 (mips4) `clz $7,$9' {standard input}:1797: Error: opcode not supported on this processor: vr5000 (mips4) `clz $7,$7' {standard input}:1851: Error: opcode not supported on this processor: vr5000 (mips4) `clz $7,$7' {standard input}:2831: Error: opcode not supported on this processor: vr5000 (mips4) `clz $7,$7' {standard input}:4209: Error: opcode not supported on this processor: vr5000 (mips4) `clz $7,$7' {standard input}:4329: Error: opcode not supported on this processor: vr5000 (mips4) `clz $2,$2' make[2]: *** [arch/mips/mm/tlbex.o] Error 1 which triggered due to a regression causing the file to be built with `-march=r5000' rather than `-march=sb1', fixed separately. Nevertheless the error should not happen, the other uses of CLZ are appropriately guarded. This change copies the arrangement from one of those other places. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7222/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: c-r4k: Avoid duplicate CPU_74K/CPU_1074K checksMaciej W. Rozycki2014-07-301-4/+4
| | | | | | | | | | | | | | Code in a switch statement in probe_pcache checks the CPU type twice unnecessarily for processor implementations that have the alias removal feature reported by the CP0 Config7.AR and Config7.IAR bits. This change rewrites the affected fragment avoiding the extraneous check and improving readability. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7221/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM63xx: Allow setting affinity for IPICJonas Gorski2014-07-301-6/+40
| | | | | | | | | | | | | | | | Wire up the set_affinity call for the internal PIC if booting on a cpu supporting it. Affinity is kept to boot cpu as default. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Gregory Fong <gregory.0xf0@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7323/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM63xx: Use irq_desc as argument for (un)maskJonas Gorski2014-07-301-8/+10
| | | | | | | | | | | | | | | In preparation for applying affinity, use the irq descriptor as the argument for (un)mask. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Gregory Fong <gregory.0xf0@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7317/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM63xx: Wire up the second cpu's irq lineJonas Gorski2014-07-301-7/+37
| | | | | | | | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Gregory Fong <gregory.0xf0@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7322/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM63xx: Protect irq register accessesJonas Gorski2014-07-301-0/+26
| | | | | | | | | | | | | | | Since we will have the chance of accessing the registers concurrently, protect any accesses through a spinlock. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Gregory Fong <gregory.0xf0@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7321/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM63xx: Add cpu argument to dispatch internalJonas Gorski2014-07-301-8/+10
| | | | | | | | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Gregory Fong <gregory.0xf0@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7320/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM63xx: Populate irq_{stat,mask}_addr for second cpuJonas Gorski2014-07-301-0/+18
| | | | | | | | | | | | | | Set it to zero if there is no second set. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Gregory Fong <gregory.0xf0@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7319/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM63xx: Append irq line to irq_{stat,mask}*Jonas Gorski2014-07-302-33/+34
| | | | | | | | | | | | | | | The SMP capable irq controllers have two interrupt output pins which are controlled through separate registers, so make the variables arrays. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Gregory Fong <gregory.0xf0@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7318/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM63xx: Replace irq dispatch code with a generic versionJonas Gorski2014-07-301-74/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | The generic version uses a variable length of u32 registers instead of u32/u64. This allows easier support for "wider" registers without having to rewrite everything. This "generic" version is as fast as the old version in the best case (i == next set bit), and twice as fast in the worst case in 64 bits. Using a macro was chosen over a (forced) inline version because gcc generated more compact code with the macro. The change from (signed) int to unsigned int for i and to_call was intentional as the value can be only between 0 and (width - 1) anyway, and allowed gcc to optimise the code a bit further. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Gregory Fong <gregory.0xf0@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7316/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM63xx: Move bcm63xx_init_irq downJonas Gorski2014-07-301-98/+92
| | | | | | | | | | | | | | Allows up to drop the prototypes from the top. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Gregory Fong <gregory.0xf0@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7315/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM63xx: Add width to __dispatch_internalJonas Gorski2014-07-301-3/+3
| | | | | | | | | | | | | | Make it follow the same naming convention as the other functions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Gregory Fong <gregory.0xf0@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7314/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM63xx: Remove !RUNTIME_DETECT code for bcmcpu_get_idJonas Gorski2014-07-302-93/+38
| | | | | | | | | | | | | | Use the same pattern as with get_*_cpu_type() to allow the compiler to remove code for non enabled SoC types. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7273/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM63xx: Remove !RUNTIME_DETECT in cpu-feature-overridesJonas Gorski2014-07-301-1/+1
| | | | | | | | | | | | | | All three SoCs have in common they have a BMIPS32/BMIPS3300 CPU, so we can replace this as no SoC with BMIPS4350 support enabled. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7272/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM63xx: Remove !RUNTIME_DETECT usage from enet codeJonas Gorski2014-07-302-50/+0
| | | | | | | | | | Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7270/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM63xx: Remove !RUNTIME_DETECT from spi codeJonas Gorski2014-07-302-35/+0
| | | | | | | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7271/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM63xx: Remove !RUNTIME_DETECT code from gpio codeJonas Gorski2014-07-301-14/+0
| | | | | | | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7269/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM63xx: Remove !RUNTIME_DETECT from reset codeJonas Gorski2014-07-301-60/+0
| | | | | | | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7268/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM63xx: Remove !RUNTIME_DETECT from irq setup codeJonas Gorski2014-07-301-109/+0
| | | | | | | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7267/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM63xx: Remove !RUNTIME_DETECT code from register setsJonas Gorski2014-07-301-78/+0
| | | | | | | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7266/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM63xx: Sync MIPS counters during CPU bringupJonas Gorski2014-07-301-0/+1
| | | | | | | | | | | | | | | | | | We are using the mips counters as the clock source, so we need to ensure they are synced, else e.g. gettimeofday will return different values depending on which core it was run. Observed difference was about 8 seconds, causing ~8 seconds ping or time running backwards for some programs. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7265/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ralink: Use strlcpy to ensure string is always NUL-terminated.Rickard Strandqvist2014-07-301-1/+1
| | | | | | | | | | | | | | Replacing strncpy with strlcpy to avoid strings that lacks null terminate. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Cc: Rob Herring <robh@kernel.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7485/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: remove old clock supportManuel Lauss2014-07-305-177/+5
| | | | | | | | | | With the clock framework in place, remove unused functions and bits, and drop the CLK_IGNORE_UNUSED flag, which is now unneeded. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7473/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: au1xmmc: use clk frameworkManuel Lauss2014-07-301-10/+21
| | | | | | | | | | Use the clock framework to get the peripheral clock rate to correctly set the MMC/SD bus clock divider. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7475/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: au1200fb: use clk frameworkManuel Lauss2014-07-301-27/+23
| | | | | | | | | | minimal patch to replace direct clock register hackery with clock framework calls. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7472/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: au1100fb: use clk frameworkManuel Lauss2014-07-303-14/+37
| | | | | | | | | | Use the clock framework to en/disable the clock to the au1100 framebuffer device. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7474/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: irda: use clk frameworkManuel Lauss2014-07-301-2/+46
| | | | | | | | | | Test the existence of the irda_clk clock object, use it to en/dis- able it when date is being transferred. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7470/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: db1x00: use clk frameworkManuel Lauss2014-07-303-25/+45
| | | | | | | | | Make use of the clk framework to set up and enable all PSC clocks. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7469/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: pci: use clk framework to enable PCI clockManuel Lauss2014-07-301-1/+23
| | | | | | | | | | Use the clock framework to get at the PCI clock source and enable it on driver initialization. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7471/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: usb: use clk frameworkManuel Lauss2014-07-301-7/+40
| | | | | | | | | | | | Add use of the common clock framework to set and enable the 48MHz clock source for the onchip OHCI and UDC blocks. Tested on a DB1500. (Au1200 and Au1300 use an external 48MHz crystal). Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7467/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: platform: use clk framework for uartsManuel Lauss2014-07-303-22/+12
| | | | | | | | | | Use the clock framework to get the rate of the peripheral clock. Remove the now obsolete get_uart_baud_base function. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7468/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: clock framework integration of onchip clocksManuel Lauss2014-07-304-2/+1115
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces common clock framework integration for all configurable on-chip clocks on Alchemy chips: - 2 or 3 PLLs which generate integer multiples of the root rate 12MHz, - 6 dividers which take one of the 3 PLLs as input and divide their rate by either multiples of 2 or 1 (Au1300). - another bank of up to 6 muxes which take either one of the 6 above dividers or one of the PLLs directly and divide their rate further by 1, 2, 3 or 4. - a few other sources which are used by onchip peripherals and are informational. This implementation will take the clock tree as it was set up by boot firmware: all in-kernel boards should continue to work without having to set up the clock tree in board code. CLK_IGNORE_DISABLED will be removed once all drivers have been converted. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7466/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: remove au_read/write/syncManuel Lauss2014-07-3013-377/+340
| | | | | | | | | replace au_read/write/sync with __raw_read/write and wmb. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7465/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: add helpers to access static memory ctrl registers.Manuel Lauss2014-07-306-52/+62
| | | | | | | | | | | | | | This patch changes the static memory controller registers to offsets from base, prefixes them with AU1000_ to avoid silent failures due to changed addresses and introduces helpers to access them. No functional changes, comparing assembly of a few select functions shows no differences. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7463/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: introduce helpers to access SYS register block.Manuel Lauss2014-07-3017-159/+152
| | | | | | | | | | | | | | | This patch changes all absolute SYS_XY registers to offsets from the SYS block base, prefixes them with AU1000 to avoid silent failures due to changed addresses, and introduces helper functions to read/write them. No functional changes, comparing assembly of a few select functions shows no differences. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7464/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: au1000.h move C-code after register definitions.Manuel Lauss2014-07-301-618/+622
| | | | | | | | | | | | Move the C-code after all macros: A follow-on patch which introduces helpers to access the SYS_* registers needs this to build. Just code shuffling, no functional changes. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7461/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: move ethernet registers to ethernet driverManuel Lauss2014-07-302-126/+118
| | | | | | | | | | | Move the register offsets and bit descriptions from the au1000.h header to their only user, the au1000_eth.c driver. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: netdev@vger.kernel.org Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7460/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: au1000.h: remove unused register definitionsManuel Lauss2014-07-301-157/+0
| | | | | | | | | Remove the unused SSI I2S and AC97C register definitions. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7462/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: RB532: Replace parse_mac_addr() with mac_pton().Daniel Walter2014-07-301-23/+4
| | | | | | | | | Signed-off-by: Daniel Walter <dwalter@google.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7150/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Linux 3.16-rc5v3.16-rc5Linus Torvalds2014-07-131-1/+1
|
* Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds2014-07-135-45/+44
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bugfixes from Ted Ts'o: "More bug fixes for ext4 -- most importantly, a fix for a bug introduced in 3.15 that can end up triggering a file system corruption error after a journal replay. It shouldn't lead to any actual data corruption, but it is scary and can force file systems to be remounted read-only, etc" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix potential null pointer dereference in ext4_free_inode ext4: fix a potential deadlock in __ext4_es_shrink() ext4: revert commit which was causing fs corruption after journal replays ext4: disable synchronous transaction batching if max_batch_time==0 ext4: clarify ext4_error message in ext4_mb_generate_buddy_error() ext4: clarify error count warning messages ext4: fix unjournalled bg descriptor while initializing inode bitmap
| * ext4: fix potential null pointer dereference in ext4_free_inodeNamjae Jeon2014-07-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Fix potential null pointer dereferencing problem caused by e43bb4e612 ("ext4: decrement free clusters/inodes counters when block group declared bad") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Lukas Czerner <lczerner@redhat.com>
| * ext4: fix a potential deadlock in __ext4_es_shrink()Theodore Ts'o2014-07-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes the following lockdep complaint: [ INFO: possible circular locking dependency detected ] 3.16.0-rc2-mm1+ #7 Tainted: G O ------------------------------------------------------- kworker/u24:0/4356 is trying to acquire lock: (&(&sbi->s_es_lru_lock)->rlock){+.+.-.}, at: [<ffffffff81285fff>] __ext4_es_shrink+0x4f/0x2e0 but task is already holding lock: (&ei->i_es_lock){++++-.}, at: [<ffffffff81286961>] ext4_es_insert_extent+0x71/0x180 which lock already depends on the new lock. Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->i_es_lock); lock(&(&sbi->s_es_lru_lock)->rlock); lock(&ei->i_es_lock); lock(&(&sbi->s_es_lru_lock)->rlock); *** DEADLOCK *** 6 locks held by kworker/u24:0/4356: #0: ("writeback"){.+.+.+}, at: [<ffffffff81071d00>] process_one_work+0x180/0x560 #1: ((&(&wb->dwork)->work)){+.+.+.}, at: [<ffffffff81071d00>] process_one_work+0x180/0x560 #2: (&type->s_umount_key#22){++++++}, at: [<ffffffff811a9c74>] grab_super_passive+0x44/0x90 #3: (jbd2_handle){+.+...}, at: [<ffffffff812979f9>] start_this_handle+0x189/0x5f0 #4: (&ei->i_data_sem){++++..}, at: [<ffffffff81247062>] ext4_map_blocks+0x132/0x550 #5: (&ei->i_es_lock){++++-.}, at: [<ffffffff81286961>] ext4_es_insert_extent+0x71/0x180 stack backtrace: CPU: 0 PID: 4356 Comm: kworker/u24:0 Tainted: G O 3.16.0-rc2-mm1+ #7 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: writeback bdi_writeback_workfn (flush-253:0) ffffffff8213dce0 ffff880014b07538 ffffffff815df0bb 0000000000000007 ffffffff8213e040 ffff880014b07588 ffffffff815db3dd ffff880014b07568 ffff880014b07610 ffff88003b868930 ffff88003b868908 ffff88003b868930 Call Trace: [<ffffffff815df0bb>] dump_stack+0x4e/0x68 [<ffffffff815db3dd>] print_circular_bug+0x1fb/0x20c [<ffffffff810a7a3e>] __lock_acquire+0x163e/0x1d00 [<ffffffff815e89dc>] ? retint_restore_args+0xe/0xe [<ffffffff815ddc7b>] ? __slab_alloc+0x4a8/0x4ce [<ffffffff81285fff>] ? __ext4_es_shrink+0x4f/0x2e0 [<ffffffff810a8707>] lock_acquire+0x87/0x120 [<ffffffff81285fff>] ? __ext4_es_shrink+0x4f/0x2e0 [<ffffffff8128592d>] ? ext4_es_free_extent+0x5d/0x70 [<ffffffff815e6f09>] _raw_spin_lock+0x39/0x50 [<ffffffff81285fff>] ? __ext4_es_shrink+0x4f/0x2e0 [<ffffffff8119760b>] ? kmem_cache_alloc+0x18b/0x1a0 [<ffffffff81285fff>] __ext4_es_shrink+0x4f/0x2e0 [<ffffffff812869b8>] ext4_es_insert_extent+0xc8/0x180 [<ffffffff812470f4>] ext4_map_blocks+0x1c4/0x550 [<ffffffff8124c4c4>] ext4_writepages+0x6d4/0xd00 ... Reported-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reported-by: Minchan Kim <minchan@kernel.org> Cc: stable@vger.kernel.org Cc: Zheng Liu <gnehzuil.liu@gmail.com>
OpenPOWER on IntegriCloud